How to test the rule if multiline container is passing to the task?

Hi Experts,
I am working on leave workflow. I have to get the approvers based on no of days of leave and leave type. I am getting these details in ITEMS_TAB internal table. I am passing this table to a rule. Now my problem is when I tried to simulate the rule I am not getting any input screen to enter the data.
ITEMS_TAB is an internal table type of "PTREQ_ITEMS_WF_TAB_FLAT".
In the rule I have created a container by selecting the radiobutton "ABAP Dict. Data Type" and entered the above reference parameter is it right way?
Is it possible to test the rule independently if I use multiline container as import parameter in my rule? If so can anybody please tell me how to test the rule?
Thank You.
Srija.

Hi Pavan,
Thank you.
To copy the values I am not getting any input screen to input the values. I observed one thing that the type that I am referring in the Rule is a deep structure. Is this is the reason that I am not getting the input screen to enter the values?
I tested by creating aother rule by taking a field for that rule I am getting the input screen to simulate the Rule.
Can you please suggest if the rule will not work then what I have to do? without the rule how can I get the agents?
Thank you.
Srija

Similar Messages

Refresh the values in multiline container

Hi All,
Can any one help me on this.
How to refresh the values in multiline container of workflow.
Any function module are available to refresh the multiline container .
Thanks,
Harsha

Hi,
What do you mean by refresh?
Have you tried SAP_WAPI_WRITE_CONTAINER? Always check workflow functions SAP_WAPI for any workflow functionality. If you don't find one for your purposes within SAP_WAPI*, the functionality probably cannot be achieved (at least not easily).
Regards,
Karri

Outlook 2013 Rules issue when more than 50 rules exist ("The rules on this computer do not match the rules on Microsoft Exchange").

I think I may have found a bug.
My Outlook 2013 profile has more than 75 rules. When I started testing Outlook 2013, I got the message "The rules on this computer do not match the rules on Microsoft Exchange. Only one set of rules can be kept. You will usually want to keep the rules
on the server. Which rules do you want to keep?"
I did the following troubleshooting:
1. I created a new Outlook profile. This didn't fix the issue.
2. I exported my rules, cleared them using "outlook /cleanrules", then reimported the rules. This didn't fix the issue.
3. I cleared the rules again (outlook /cleanrules), then hand-entered the rules. This also didn't fix the issue.
4. I reduced the number of rules to less than 50. This FIXED the problem.
5. When I entered rule #51, the problem came back. When I removed ruled #51, the problem was again fixed.
Does anyone know of a fix or workaround to this issue?
Thanks.

Sounds like you went over your "rule quota limit" as you do have a great number of rules. Please see the link below for cause and possible resolution.
http://support.microsoft.com/kb/886616
Be kind and Mark as Answer if I helped.

I rebooted my Iphone 5S, when I pressed the home button to enter my pass code the resolution must have been reset. The font size is so large I can not enter my pass code. How can I resolve this issue?

I rebooted my Iphone 5S, when I pressed the home button to enter my pass code the resolution must have been reset. The font size is so large I can not enter my pass code. How can I resolve this issue?

Triple click Home.
After you get into the iPhone, Settings > General > Acessibility and set Zoom to Off.

Receiver determination step in the BPM and multiline container

i have made a file2file scenario where:
there is a BPM,
the BPM has a send step which contains a receive step,
a transformation that mapps the incomin message to two messages(Split-messgae case),
and then a FORK step which sends the two messges to through 2 SEND steps to the intended receiver services.
It didnt work......and i followed a blog-> /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure ............... which suggested to have a
"receiver-determination" step in the BPM before the SEND step.... it says that this
"receiver-determination" step will put the message in a MULTILINE container..
i m confused bout this step ........ can anybody explain.....
please help

HI,
In receiver determination step selctthe multi line container element.in container editor create the one element with type as receiver and select the check box.
A Receiver Determination step returns set of receivers configured for the output abs interfaces in the directory and puts it into receiver which is a multiline container receiver element
Regards
Chilla

How to refresh the data in a container and to update the new data

Hi,
I have created a Module Pool Program in which i have two containers to display the long text.
Initially this container is filled and based on some condition i want to update the text in the same conatiner.
I am using the below two classes to do all this.
cl_gui_textedit,
cl_gui_custom_container,
Could someone help me how to remove the long text in the container and update the new long text.
I am getting the new long text but not able display it in the same container. Please someone help me how to refresh and update the container.
Thanks in advance.

Hi
Try this.
IF cl_gui_textedit IS INITIAL.
create control container
    CREATE OBJECT cl_gui_custom_container
       EXPORTING
            container_name = 'Container Name''
       EXCEPTIONS
            cntl_error                  = 1
            cntl_system_error           = 2
            create_error                = 3
            lifetime_error              = 4
            lifetime_dynpro_dynpro_link = 5.
create text_edit control
    CREATE OBJECT cl_gui_textedit
       EXPORTING
            parent = cl_gui_custom_container
            wordwrap_mode = cl_gui_textedit=>wordwrap_at_windowborder
            wordwrap_to_linebreak_mode = cl_gui_textedit=>false
       EXCEPTIONS
            error_cntl_create      = 1
            error_cntl_init        = 2
            error_cntl_link        = 3
            error_dp_create        = 4
            gui_type_not_supported = 5.
ENDIF.
*--use method to set the text
CALL METHOD cl_text_edit->set_text_as_stream
    EXPORTING
      text            = t_lines ( Internal table with long text).
    EXCEPTIONS
      error_dp        = 1
      error_dp_create = 2
      OTHERS          = 3.
regards,
Raghu.

How to create rewrite rule to accept only mail pass from antivirus server

I want to set JES messaging 6.0 to accept only mail that scaned from antivirus server. If clients send direct to messaging server it will forward that mail to antivirus server. After mail was scaned it is sent to messaging server and messaging server accept it.
How to create rewrite rule for this case?

Please read this technical note, for setting up such a configuration:
http://ims.balius.com/downloads/AlternateConversion.pdf
Please note, this site contains some other very useful information for Messaging Server, but IE browsers are NOT supported. You must use some other browser.

IPhoto says it cannot import my photos b/c they may be an unrecognized file or the file may not contain valid data. The operation could not be completed. Error code is: ImageCaptureCoreError-9905.

Unable to download photos from my camera. iPhoto returns an error message that states: The following files could not be imported (they may be an unrecognized file or the files may not contain valid data). FILE NAME: 100_0490.JPG REASON: com.apple.ImageCaptureCoreError- 9905. WHAT'S UP WITH THAT? Did not have a problem importing photos under the LEOPARD OS, however, now that I have upgraded to Yosemite 10.10.3 the iPHOTO app is not performing the imports.

Are you using Photos, or iPhoto? Maybe you've got a corrupt file on your camera. I would try using the image capture application to import the bad picture to my desktop. If it works and the picture looks ok, then delete that pic from the camera, then try to import into iphoto again. You can then import the pic it was saying was bad from your desktop.
Or, try downloading all the pics using image capture and then import from the download folder.

Is it against the rules to ask if Apple might improve the iphone functions?

I get al lot of phone pics sent to me and the laborious reference to AT&T's sight where I can go and try to enter a whole bunch of codes to see a simple phone pic .
It is annoying enough to not be able to text photos let alone not be able to see ones sent to me.
Any thoughts that they might upgrade the iphone in this regard?

Anyone who knows for sure would be under NDA not to tell anyone, regardless of the rules on this forum. Anything else is just speculation.
No point in bringing it up here--Complain to Apple:
http://apple.com/feedback/iphone.html
Also complain to AT&T that the link they send could include the necessary codes instead of making you enter them.
Workaround: tell your friends to text to your email address--they send it as a text but you receive it as an email. You can also email such that they receive it as a text. Search the forum for details, they have been given many times.

When I open the new tab in firefox , muliple window automatically opened with. also the page did not contain all feature of the site , some panels not displayed

Problem No. 1 //// when I google the word (boy) as example >>>>> then select image >>>>> right click on any image and choose (open in an new tab) >>>>>> new tab opened but the image not appear, instead a black window appear .
Problem No. 2 //// in any windows >>> if I choose the link >>> the link did not open until the (new window opened and my antivirus warm me that there is a dangerous thread must remove or blocked)

If your security software is blocking images then you need to check the settings there or contact its website for support.
If images are missing then check that you do not block images from some domains.
*Tap the Alt key or press F10 to show the Menu bar.
Check the permissions for the domain in the currently selected tab in "Tools > Page Info > Permissions"
Check "Tools > Page Info > Media" for blocked images
*Select the first image link and use the cursor Down key to scroll through the list.
*If an image in the list is grayed and "Block Images from..." has a checkmark then remove this checkmark to unblock images from this domain.
Make sure that you do not block (third-party) images, the permissions.default.image pref on the about:config page should be 1.
Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
Make sure that you allow pages to choose their own colors.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
Note that these settings affect background images.
See also:
*http://kb.mozillazine.org/Website_colors_are_wrong
There are extensions like Adblock Plus (Firefox/Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images and other content.
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*http://kb.mozillazine.org/Websites_look_wrong

How to test Windows 2012 R2 DHCP Failover without shutting down the service?

How can I test the Win2012R2 DHCP Failover?
There is a command or script, that i could use to test if DHCP failover is working properly?
How to monitor the sync of the objects?
How to make sure that it will do the job, if required?
Or i have to really stop DHCP server main server and see the failover?

Hello,
you have to keep in mind that this has ONLY effect for machines that request during the downtime a lease. So if your lease time is for example 8 hours a computer will ask after 4 hours for the renewal of the lease.
Means there is no problem for running machines during the test. You just need a computer to start after the service is shutdown on the first DHCP server, should take only some minutes to check if the fail over works. Then you could already start the service
again if you see the lease on the new server.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

How to pass value to Multiline container element in workflow ?

Dear Experts,
I am using the BAPI "SAP_WAPI_WRITE_CONTAINER" to write into the workitem container elements. now i want to write the data into a multiline container element. i am unable to do the same. please guide me how to write the data into multiline container.
I am getting the data from portal so i am using the BAPI to populate the container.
Please help me out...
Thanks & Regards
Nigesh

Hi,
Use the following code:
DATA: lv_text             TYPE        string,
          lt_cont_vals        TYPE        swconttab,
          lt_cont_defs        TYPE        swbconttab,
          lo_oref             TYPE REF TO cx_root,
          lo_workitm_cntxt    TYPE REF TO cl_swf_run_workitem_context,
          lo_wi_conv          TYPE REF TO if_swf_cnt_conversion,
          lo_wi_cnt           TYPE REF TO cl_swf_cnt_container,
          lif_wi_cnt          TYPE REF TO if_swf_ifs_parameter_container,
          lo_exception_return TYPE REF TO cx_swf_cnt_container.
***--- Get work Item Context
   TRY.
       CALL METHOD cl_swf_run_workitem_context=>get_instance
         EXPORTING
           im_wiid     = im_wi_id
         RECEIVING
           re_instance = lo_workitm_cntxt.
     CATCH cx_swf_run_wim INTO lo_oref.
       lv_text = lo_oref->get_text( ).
   ENDTRY.
***--- Get Instance of the work Item Container
   CALL METHOD lo_workitm_cntxt->if_wapi_workitem_context~get_wi_container
     RECEIVING
       re_container = lif_wi_cnt.
***--- Type casting work item container into class CL_SWF_CNT_CONTAINRER
   lo_wi_cnt ?= lif_wi_cnt.
***-- Set the value
   TRY.
       lo_wi_cnt->if_swf_cnt_element_access_1~element_set_value(
         EXPORTING
           name             = 'ITEM'
           value            = t_item[]
     CATCH cx_swf_cnt_cont_access_denied.    " Change Access to Container Not Allowed
     CATCH cx_swf_cnt_elem_not_found.    " Element Not Found
     CATCH cx_swf_cnt_elem_access_denied.    " Element Must Not Be Changed
     CATCH cx_swf_cnt_elem_type_conflict.    " Type Conflict Between Value and Current Parameter
     CATCH cx_swf_cnt_unit_type_conflict.    " Type Conflict Between Unit and Current Parameter
     CATCH cx_swf_cnt_elem_def_invalid.    " Element Definition (For Example, Type Name) Is Invalid
     CATCH cx_swf_cnt_invalid_qname.    " Qualified Name Invalid/Already Being Used
     CATCH cx_swf_cnt_container.    " Exception in the Container Service
   ENDTRY.
* VERY IMPORTANT -- Save changes to DB
   TRY.
       lo_wi_cnt->save_to_database( ).
     CATCH cx_swf_cnt_invalid_por.    " Invalid Persistent Object Reference
   ENDTRY.
   lo_workitm_cntxt->publish( ).
   COMMIT WORK AND WAIT.

Bill Presentment Architecture, how to Overide Default Rule and ensure the AR Invoice/Transaction Chooses "Customer Transaction Data Source"

Hi Intelligentsia,
we are on 12.2.4 on linux, i have setup external template with supplementary Data source as "Customer Transaction Data Source", when i test it fails, i am not able to debug it , however when i run the BPA Transaction Print Program (Multiple Languages) it always gives me the default layout.
Query is
How do i ensure the Default rule Does not apply to my Invoice and i am able to override it
is there a method to explicitly Ensure the Supplementary Data Source as "Customer Transaction Data Source", when i am creating the AR Invoice/ Transaction? Am i missing some setup in AR Invoice Transaction Flexfield where i need to setup this "Customer Transaction Data Source" as the DFF Context ?
please let me know if you need any more information.
Abdulrahman

Hello,
Thanks for the answer. When you say rule data is that Rule creation date or the "Bill Creation From Date" that we setup while creating the rule? I have created a new invoice after the rule created, but it did not pick the new custom template.
I have another issue. It would be greate if you could help. I have split my logo area into 2 vertically to display logo in one and legal entity and addres on the other one. In the Online Preview I can see the logo and Legal address. But in the print preview , i am not able to see them. It just shows a blank space. Any Idea?
Thanks in advance

How to remove the rule or class function in CS5

i need to know how to remove the rule or class function in CS5 at the bottom of the screen there are two options for formating HTML and Css when i click the HTML it only allows me to change the bold or italics or link something but when i click CSS it allows me to format how i want the paragraph aligned and the text size and font when i click on lets say changing the font size a box comes up asking me to name a rule so it applies it to everything else i type i want to know how to stop tht like edit everything on my own and if i use CS5 here will it be compatible with CS4 or CS3 at my skool plzz help ive been frustrated with this

If I use CS5 here will it be compatible with CS4 or CS3 at my skool plzz help ive been frustrated with this
Code is code. It doesn't matter which product you use.
i need to know how to remove the rule or class function in CS5
You can't. DW encourages you to use good coding methods, which means using CSS classes and to keep content (HTML) separate from styles (CSS). For example, if you change font-size on p tags like so:
p {font-size: 38px}
Every paragraph will have 38px sized text.
If you want to apply a special style to just a portion of your text, you must define a CSS class name like so:
.foo {
font-size: 38px;
color: red;
HTML:
This is normal paragraph text And this is very big and red.
This is normal paragraph text And this is very big and red.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
Message was edited by: Nancy O. -- unfortunately, this forum doesn't support Raw HTML with inline styles. You'll need to paste my code examples into your DW page to see the effect.

How to change business rule in the runtime

I create a business rule and add it in a BPEL process. After deployment, this process works fine.
How to modify the rule in run time? I mean I do not need to redeploy the process.

If you are using SOA suite 10g qhen you add a decision serivce to your BPEL process it doens;t use a pointer to the rules repository but actually makes a copy of the rules respository and deploys it locally within the BPEL process. Because of this any changes you make to your initial respository will not be seen because the delopyed process does not use the original version. You need to update the decision.dec file in your BPEL project and change the repository information to point to the original rules repository you want to use.
Once you have done this redeploy the BPEL process and your changes shoudl be reflected in your process.
Hopefully this information helps
Regards
richard

How to test the rule if multiline container is passing to the task?

Similar Messages

Maybe you are looking for