How to test the reversed proxy?
Hi!
Our company has a standard setup for our portal:
Reversed Proxy <--- Webdispatcher <---- Portal
We want to test whether the setup is free of errors.
Could you tell how to verify that?
I'll give points. Thanks!
Message was edited by:
Laura Jones
Hi Laura ,
The question of yours is not clear to me .If at all are you looking for help regarding reverse proxy
refer to this
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/2234ee0b413fe1e10000000a11466f/frameset.htm
Thanx
Pankaj
Similar Messages
-
Images,css not appearing properly after accessing the reverse proxy page.
Usecase :
1) OHS1 with mod_osso agent deployed.
2) OHS1 configured as reverse proxy.It points to the webserver(OHS2) of the app1.
OHS1(mod_osso agent installed)-->OHS2(app1 webserver)
3) httpd.conf entry in OHS1:
ProxyRequests Off
<Proxy *>
Order deny,allow
Allow from all
</Proxy>
ProxyPass /test/ http://tkcltkcl.padma.xxx.com:8088/test/
ProxyPassReverse /test/ http://tkcltkcl.padma.xxx.com:8088/test/
4) The direct url for appl1 works as per expectation. The reverse proxy redirects from the OHS1 correctly to the app1 OHS webserver accessing the app1 url.But the contents in the redirected app1 url are not aligned properly.Images,css,placement of html links are not appearing properly on the page.
Do we need to do any other configuration in the revere proxy setup so as to avoid the misalignment on the redirected page?
Thanks.Hi:
Thanks for the reply! I have been UTTERLY scrupulous about
keeping precisely time-matched and points-in-my-process-matched
copies of the project folder for logical, "scientific" testing in
RH5 and RH7, on precisely matched content.
I have never even tried to open an RH7-processed copy of the
project in RH5 because I was warned strongly against this action.
It boils down to this; I cleaned up, FANATICALLY, all those
illegitmate filenames, ran the project again in 5, still got
impermissible missing images (and I mean MORALLY impermissible,
because I'm doing the right thing!)
Then, I took that project folder, copied it, and opened the
exact same ingredients, via the .xpj file, in RH7. Same missing
images.
WAIT! Left out something important in first post! Dang; this
was important! I've fixed missing images, had them appear properly
upon compilation, then had others that HAD been right, come out
missing. Have also had reimported, re-placed images come out upon
compilation following repair, and then go missing again on third or
later, subsequent compilations. Maddening.
Am EXTREMELY reluctant to delete CPD file, because the last
time I did that, I lost EXTENSIVE work I'd done on TOC and Index.
Not cool at all.
Hope this wasn't too cranky; truly grateful for help. Just
very frustrated.
Thanks! -
How to do the reverse po in this report
Hi,
i have a one problem in this report . i don,t know how to display the
reverse po in this report. reverse po should have a po history cat. 'N' (field is bewtp)
i connect type 'Q' and the type 'E' but not been able to connect the 'N'. when i connect it will give me the wrong amount and some field should not been displayed. i will provide u the following code.
please help me.
Thanks
dinesh
*& Report Z_MM_PURCHASE_REGISTER
REPORT Z_MM_PURCHASE_REGISTER.
Short Description: Purchase Register
TABLES *
TABLES : ekko, taxcom, ekpo, ekbe,ekkn,konv,komv,t007s, j_1imovend, bseg .
TYPE-POOLS: slis.
TYPES: Begin with TY_ *
TYPES : BEGIN OF ty_ekko,
BSART LIKE EKKO-BSART,
KNTTP LIKE EKPO-KNTTP,
ebeln LIKE ekko-ebeln,
knumv LIKE ekko-knumv,
lifnr LIKE ekko-lifnr,
waers LIKE ekko-waers,
kalsm LIKE ekko-kalsm,
lands LIKE ekko-lands,
ekorg LIKE ekko-ekorg,
wkurs LIKE ekko-wkurs,
bedat LIKE ekko-bedat,
ebelp LIKE ekpo-ebelp, "po line item
mwskz LIKE ekpo-mwskz, "tax code
bukrs LIKE ekpo-bukrs,
matkl LIKE ekpo-matkl,
mtart LIKE ekpo-mtart,
netpr LIKE ekpo-netpr, "Net price in purchasing document
meins LIKE ekpo-meins, "unit
menge LIKE ekpo-menge, "quantity
txz01 LIKE ekpo-txz01, "material description
txjcd LIKE ekpo-txjcd, "tax jurisdiction code
matnr LIKE ekpo-matnr,
llief LIKE ekko-llief,
meins LIKE ekpo-meins,
bprme LIKE ekpo-bprme,
netpr LIKE ekpo-netpr,
peinh LIKE ekpo-peinh,
lifnr like lfa1-lifnr,
name1 like lfa1-lifnr,
pstlz like lfa1-pstlz,
stras like lfa1-stras,
text1 like t007s-text1,
END OF ty_ekko.
TYPES : BEGIN OF ty_ekbe,
ebeln LIKE ekbe-ebeln, "po number
ebelp LIKE ekbe-ebelp, "po line item
buzei LIKE ekbe-buzei,
belnr LIKE ekbe-belnr, "Number of material document
budat LIKE ekbe-budat, "Posting date in the document
xblnr LIKE ekbe-xblnr, "Reference document number
werks LIKE ekbe-werks, "plant
matnr LIKE ekbe-matnr, "material
menge LIKE ekbe-menge, "quantity
peinh LIKE ekpo-peinh,
dmbtr LIKE ekbe-dmbtr, "Amount in local currency
kalsm LIKE ekko-kalsm, "Procedure (pricing)
waers LIKE ekbe-waers, "currency
wrbtr LIKE ekbe-wrbtr, "Amount in document currency
bwtar LIKE ekbe-bwtar, "Valuation type
shkzg LIKE ekbe-shkzg,
maktx LIKE makt-maktx,
mwskz LIKE ekbe-mwskz,
bldat LIKE ekbe-bldat,
srvpos LIKE ekbe-srvpos,
packno LIKE ekbe-packno,
introw LIKE ekbe-introw,
lfbnr LIKE ekbe-lfbnr,
bwart TYPE ekbe-bwart,
budat1 TYPE ekbe-budat,
belnr1 TYPE ekbe-belnr,
END OF ty_ekbe.
TYPES : BEGIN OF ty_display,
BSART LIKE EKKO-BSART,
KNTTP LIKE EKPO-KNTTP,
lifnr(10) TYPE C, " LIKE ekko-lifnr,
ebeln LIKE ekko-ebeln,
bedat LIKE ekko-bedat,
budat LIKE ekbe-budat,
matnr LIKE ekbe-matnr,
maktx LIKE makt-maktx,
belnr LIKE ekbe-belnr,
bldat LIKE ekbe-bldat,
menge LIKE ekpo-menge,
peinh LIKE ekpo-peinh,
dmbtr LIKE ekbe-dmbtr,
shkzg LIKE ekbe-shkzg,
custduty LIKE konv-kwert,
bed LIKE konv-kwert,
cvd LIKE konv-kwert,
sertax LIKE konv-kwert,
sereducess LIKE konv-kwert,
surcharge LIKE konv-kwert,
educess LIKE konv-kwert,
insure LIKE konv-kwert,
freight LIKE konv-kwert,
octroi LIKE konv-kwert,
kursf LIKE rbkp-kursf,
grossamt LIKE konv-kwert,
vat4 LIKE konv-kwert,
vat8 LIKE konv-kwert,
vat125 LIKE konv-kwert,
INC LIKE KONV-KWERT, "
PF LIKE KONV-KWERT,
CF LIKE KONV-KWERT,
INS LIKE KONV-KWERT,
cst LIKE konv-kwert,
subdeb LIKE ekbe-dmbtr,
netamt LIKE ekbe-dmbtr,
cenvatcreditbed LIKE konv-kwert,
cenvatcreditecc LIKE konv-kwert,
vatcredit LIKE konv-kwert,
bgcharges LIKE konv-kwert,
srvpos LIKE ekbe-srvpos,
ktext1 LIKE esll-ktext1,
sertaxcredit LIKE konv-kwert,
sereducesscredit LIKE konv-kwert,
totaltaxbenefit LIKE konv-kwert,
inventoryvalue LIKE konv-kwert,
bwart TYPE ekbe-bwart,
belnr1 TYPE ekbe-belnr,
budat1 TYPE ekbe-budat,
lfbnr TYPE ekbe-lfbnr,
bprme LIKE ekpo-bprme,
meins LIKE ekpo-meins,
name1 like lfa1-name1,
pstlz like lfa1-pstlz,
stras like lfa1-stras,
mwskz like ekpo-mwskz,
text1 like t007s-text1,
kalsm like t007s-kalsm,
j_1icstno like j_1imovend-j_1icstno,
hkont(10) TYPE C, " like bseg-hkont,
saknr like ska1-saknr,
sakan like ska1-sakan,
ktoks like ska1-ktoks,
mcod1 like ska1-mcod1,
WAERS LIKE EKKO-WAERS,
bukrs like ekpo-bukrs,
total LIKE ekbe-dmbtr,
END OF ty_display.
TYPES : BEGIN OF ty_services,
ebeln LIKE ekpo-ebeln,
ebelp LIKE ekpo-ebelp,
lfbnr LIKE ekbe-lfbnr,
packno LIKE esll-packno,
sub_packno LIKE esll-sub_packno,
srvpos LIKE esll-srvpos,
ktext1 LIKE esll-ktext1,
netwr LIKE esll-netwr,
act_wert LIKE esll-act_wert,
menge LIKE esll-menge,
bldat LIKE ekbe-bldat,
END OF ty_services.
TYPES : BEGIN OF ty_konv,
ebeln LIKE ekpo-ebeln,
ebelp LIKE ekpo-ebelp,
knumv LIKE konv-knumv,
kposn LIKE konv-kposn,
kschl LIKE konv-kschl,
kwert LIKE konv-kwert,
kbetr LIKE konv-kbetr,
END OF ty_konv.
TYPES : BEGIN OF ty_lfbnr,
belnr TYPE ekbe-belnr,
lfbnr TYPE ekbe-lfbnr,
END OF ty_lfbnr.
TYPES : BEGIN OF ty_miro,
belnr1 TYPE ekbe-belnr,
belnr TYPE ekbe-belnr,
budat TYPE ekbe-budat,
END OF ty_miro.
types: begin of ty_lfa1,
lifnr like lfa1-lifnr,
name1 like lfa1-lifnr,
pstlz like lfa1-pstlz,
stras like lfa1-stras,
end of ty_lfa1.
types: begin of ty_t007s,
mwskz like t007s-mwskz,
text1 like t007s-text1,
spras like t007s-spras,
kalsm like t007s-kalsm,
end of ty_t007s.
types: begin of ty_j_1imovend,
lifnr like j_1imovend-lifnr,
j_1icstno like j_1imovend-j_1icstno,
end of ty_j_1imovend.
types: begin of ty_bseg,
lifnr like bseg-lifnr,
dmbtr like bseg-dmbtr,
shkzg like bseg-shkzg,
hkont like bseg-hkont,
BELNR LIKE BSEG-BELNR,
end of ty_bseg.
types: begin of ty_ska1,
saknr like ska1-saknr,
sakan like ska1-sakan,
ktoks like ska1-ktoks,
mcod1 like ska1-mcod1,
end of ty_ska1.
DATA : it_lfbnr TYPE STANDARD TABLE OF ty_lfbnr,
wa_lfbnr TYPE ty_lfbnr,
it_lfa1 type standard table of ty_lfa1,
wa_lfa1 TYPE ty_lfa1,
it_t007s type standard table of ty_t007s,
wa_t007s TYPE ty_t007s,
it_j_1imovend type standard table of ty_j_1imovend,
wa_j_1imovend TYPE ty_j_1imovend,
it_bseg type standard table of ty_bseg,
wa_bseg TYPE ty_bseg,
it_ska1 type standard table of ty_ska1,
wa_ska1 TYPE ty_ska1,
it_miro TYPE STANDARD TABLE OF ty_miro,
wa_miro TYPE ty_miro,
w_belnr TYPE ekbe-belnr,
w_lfbnr TYPE ekbe-lfbnr,
w_belnr1 TYPE ekbe-belnr,
w_budat TYPE ekbe-budat.
CONSTANTS: Begin with C_ *
DATA: Begin with W_ *
DATA : w_flag TYPE c.
INTERNAL TABLES: Begin with IT_ *
DATA : it_ekko TYPE STANDARD TABLE OF ty_ekko WITH NON-UNIQUE KEY ebeln
ebelp,
it_ekpo type standard table of ty_ekpo,
it_ekbe TYPE STANDARD TABLE OF ty_ekbe,
it_ekbe1 TYPE STANDARD TABLE OF ty_ekbe WITH NON-UNIQUE KEY ebeln
ebelp,
it_display TYPE STANDARD TABLE OF ty_display,
it_subdebit TYPE STANDARD TABLE OF ty_ekbe,
it_services TYPE STANDARD TABLE OF ty_services,
it_packno TYPE STANDARD TABLE OF ty_services,
it_konv TYPE STANDARD TABLE OF ty_konv.
DATA : it_fieldcat TYPE slis_t_fieldcat_alv,
it_layout TYPE slis_layout_alv,
it_komv TYPE STANDARD TABLE OF komv WITH NON-UNIQUE KEY knumv
kschl.
WORKAREAS: Begin with WA_ *
DATA : wa_ekbe TYPE ty_ekbe,
wa_ekbe1 TYPE ty_ekbe,
wa_ekko TYPE ty_ekko,
wa_komv TYPE komv,
wa_display TYPE ty_display,
WA_LFA1 TYPE TY_LFA1,
W_GROSS_AMT type KOMV-KWERT,
wa_subdebit TYPE ty_ekbe,
wa_packno TYPE ty_services,
wa_services TYPE ty_services,
wa_konv TYPE ty_konv,
wa_taxcom TYPE taxcom,
wa_ls_fieldcat TYPE slis_fieldcat_alv.
FIELD-SYMBOLS: Begin with FS_ *
FIELD-GROUPS: Begin with FG_ *
CONTROLS: *
SELECT-OPTIONS: Begin with SO_ *
SELECT-OPTIONS : so_lifnr FOR ekko-lifnr ,
so_mtart FOR ekpo-mtart,
so_ebeln FOR ekbe-ebeln,
so_matnr FOR ekbe-matnr,
so_date FOR sy-datum no-display,
do_date for ekko-bedat,
tax_code for ekpo-mwskz,
mr_date for ekbe-budat,
mat_gr for ekpo-matkl,
mat_tp for ekpo-mtart,
pr_plant for ekbe-werks,
pr_ekorg for ekko-ekorg.
PARAMETERS: Begin with PR_ *
*PARAMETER : pr_plant LIKE ekpo-werks . "OBLIGATORY.
pr_ekorg LIKE ekko-ekorg . "OBLIGATORY.
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-001 .
PARAMETER : pr_preg TYPE c radiobutton group g1 default 'X',
pr_ror TYPE c RADIOBUTTON GROUP g1 .
SELECTION-SCREEN : END OF BLOCK b1.
START-OF-SELECTION *
START-OF-SELECTION .
*--- Get the data reguired--
PERFORM f001-get_data.
*-------Calculate the tax required -
PERFORM f002-cal_taxes.
PERFORM miro_get_data.
END-OF-SELECTION *
END-OF-SELECTION.
*---Display the report--
PERFORM f003-display_register.
*& Form F001-GET_DATA
text
--> p1 text
<-- p2 text
FORM f001-get_data .
Clear and Refresh all internal table and work area.
REFRESH : it_ekko,
it_ekbe,
it_services,
it_packno,
it_konv,
it_lfa1,
it_komv.
CLEAR : wa_ekko,
wa_ekbe,
wa_services,
wa_packno,
wa_konv,
wa_lfa1,
wa_komv.
Get the history records for all the selected PO. from table EKBE of
type GR.
IF pr_preg = 'X'.
*Get Purchasing Document Number, Number of the document condition,
*Vendor's accountNumber, Currency Key, Procedure , Country for Tax
*ReturnPurchasing OrganizationExchange rate In an internal table it_ekko
*break-point.
SELECT pBSART qknttp pebeln pknumv plifnr pwaers pkalsm plands pekorg pwkurs
wkurs pbedat qebelp qbukrs qmatkl qmtart pllief qmeins qbprme
qtxjcd qmwskz pwkurs qnetpr qmenge QPEINH
INTO CORRESPONDING FIELDS OF TABLE it_ekko
FROM ekko AS p INNER JOIN ekpo AS q
ON pebeln = qebeln
WHERE p~ekorg in pr_ekorg
AND p~lifnr IN so_lifnr
AND q~mtart IN so_mtart
AND p~ebeln IN so_ebeln
and p~bedat in do_date
and q~mwskz in tax_code
and q~matkl in mat_gr
and q~mtart in mat_tp
and kalsm = 'SIL000'
AND EKORG = 'SDOP'.
GET ALL THE PO FOR WHICH MIRO HAS BEEN DONE
SELECT ebeln ebelp budat bldat werks
INTO CORRESPONDING FIELDS OF TABLE it_ekbe1
FROM ekbe
FOR ALL ENTRIES IN it_ekko
WHERE ebeln = it_ekko-ebeln
AND ebelp = it_ekko-ebelp
AND bewtp = 'Q'
AND werks in pr_plant
AND budat IN so_date
AND ( bwart = '101' OR bwart = '102' ) "OR bwart = '105' OR bwart = '106' OR bwart ='')
AND ebeln IN so_ebeln
and budat in mr_date
AND matnr IN so_matnr.
AND ( BUDAT >= SO_DATE-low and BUDAT <= SO_DATE-high ).
Check whether any records is present
IF sy-subrc = 0.
IF NOT it_ekbe1 IS INITIAL.
SELECT ebeln ebelp buzei belnr budat xblnr werks matnr menge
dmbtr waers wrbtr bwtar shkzg dmbtr bldat srvpos
packno introw lfbnr bwart
INTO CORRESPONDING FIELDS OF TABLE it_ekbe
FROM ekbe
FOR ALL ENTRIES IN it_ekbe1
WHERE ebeln = it_ekbe1-ebeln
AND ebelp = it_ekbe1-ebelp
and budat in mr_date
AND budat IN so_date
and ( BUDAT >= SO_DATE-low and BUDAT <= SO_DATE-high )
AND bewtp = 'Q'.
AND ( bwart = '101' OR bwart = '102' OR bwart = '103' OR bwart = '105' ). "OR bwart = '105' OR bwart = '106' OR bwart ='').
AND bwart = '103'.
and WERKS = PR_PLANT.
IF sy-subrc = 0.
ENDIF.
ELSE.
SELECT ebeln ebelp buzei belnr budat xblnr werks matnr menge
dmbtr waers wrbtr bwtar shkzg dmbtr bldat srvpos
packno introw lfbnr bwart
INTO CORRESPONDING FIELDS OF TABLE it_ekbe
FROM ekbe
FOR ALL ENTRIES IN it_ekbe1
WHERE ebeln = it_ekbe1-ebeln
AND ebelp = it_ekbe1-ebelp
and budat in mr_date
AND budat IN so_date
and ( BUDAT >= SO_DATE-low and BUDAT <= SO_DATE-high )
AND bewtp = 'Q'.
AND ( bwart = '101' OR bwart = '102' OR bwart = '103' OR bwart = '105' ) . "OR bwart = '105' OR bwart = '106' OR bwart ='').
AND bwart = '102'.
and WERKS = PR_PLANT.
IF sy-subrc = 0.
ENDIF.
ENDIF.
ENDIF.
new code added
*get the venor address
select alifnr bname1 bpstlz bstras b~lifnr
into corresponding fields of table it_LFA1
from ekko as a inner join lfa1 as b
on alifnr = blifnr
for all entries in it_EKKO
where B~lifnr = it_EKKO-lifnr.
***tax code description added*******************
select mwskz text1 spras kalsm
from t007s
into corresponding fields of table it_t007s for all entries in it_ekko
where mwskz = it_ekko-mwskz and spras = 'E' and kalsm = 'TAXSIL'.
*******vendor vat no. added*************
select lifnr j_1icstno
from j_1imovend
into corresponding fields of table it_j_1imovend for all entries in it_ekko
where lifnr = it_ekko-lifnr.
**********gl code added******************************************
*select lifnr shkzg dmbtr hkont
*from bseg
*into corresponding fields of table it_bseg for all entries in it_lfa1 " it_ekko
*where LIFNR = it_lfa1-LIFNR and shkzg = 'S'.
*************gl code description added*******************************************
*select saknr ktoks mcod1 sakan
*from ska1
*into corresponding fields of table it_ska1 for all entries in it_bseg
*where sakan = it_bseg-hkont and ktoks = 'MAT'.
Get the package number , service number , service text , net price ,
accual amount , qty. etc
IF NOT it_packno[] IS INITIAL.
SELECT ppackno psrvpos pktext1 pnetwr pact_wert pmenge
INTO CORRESPONDING FIELDS OF TABLE it_services
FROM esll AS p "inner join ESLL as Q
on PPLN_PACKNO = QPACKNO
and PINTROW = QINTROW
FOR ALL ENTRIES IN it_packno
WHERE p~packno = it_packno-sub_packno.
IF sy-subrc = 0.
ENDIF.
ENDIF.
Get Number of the document condition ,line item number, Condition
value for all selected PO.
IF NOT it_ekko[] IS INITIAL.
SELECT knumv kposn kschl kwert
INTO CORRESPONDING FIELDS OF TABLE it_konv
FROM konv
FOR ALL ENTRIES IN it_ekko
WHERE knumv = it_ekko-knumv.
IF sy-subrc = 0.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " F001-GET_DATA
*& Form F002-CAL_TAXES
text
--> p1 text
<-- p2 text
FORM f002-cal_taxes .
Calculate taxes for all the PO.
LOOP AT it_ekbe INTO wa_ekbe.
CLEAR : wa_display,
wa_ekko.
READ TABLE it_ekko WITH TABLE KEY ebeln = wa_ekbe-ebeln
ebelp = wa_ekbe-ebelp
INTO wa_ekko.
IF sy-subrc = 0.
ENDIF.
CLEAR wa_taxcom.
Get the text for the Material.
SELECT SINGLE maktx
INTO wa_display-maktx
FROM makt
WHERE matnr = wa_ekbe-matnr
AND spras = sy-langu.
wa_taxcom-bukrs = wa_ekko-bukrs.
wa_taxcom-budat = wa_ekbe-bldat.
wa_taxcom-budat = wa_ekko-bedat." change by dinesh
wa_taxcom-waers = wa_ekbe-waers.
wa_taxcom-kposn = wa_ekbe-ebelp.
wa_taxcom-mwskz = wa_ekko-mwskz.
wa_taxcom-txjcd = wa_ekko-txjcd.
taxcom-shkzg = 'H'.
wa_taxcom-xmwst = 'X'.
IF ekko-bstyp EQ bstyp-best.
wa_taxcom-wrbtr = wa_ekko-netpr * wa_ekbe-menge * wa_ekko-wkurs.
WA_TAXCOM-WRBTR = wa_ekbe-dmbtr.
ELSE.
taxcom-wrbtr = ekpo-zwert.
ENDIF.
wa_taxcom-lifnr = wa_ekko-lifnr.
wa_taxcom-land1 = wa_ekko-lands. "WIA
wa_taxcom-ekorg = wa_ekko-ekorg.
wa_taxcom-hwaer = 'INR'. "t001-waers.
wa_taxcom-llief = wa_ekko-llief.
wa_taxcom-bldat = wa_ekbe-bldat.
wa_taxcom-matnr = wa_ekbe-matnr. "HTN-Abwicklung
wa_taxcom-werks = wa_ekbe-werks. "pr_plant.
taxcom-bwtar = ekpo-bwtar.
wa_taxcom-matkl = wa_ekko-matkl.
wa_taxcom-meins = wa_ekko-meins.
wa_taxcom-ebeln = wa_ekbe-ebeln.
wa_taxcom-ebelp = wa_ekbe-ebelp.
wa_taxcom-mglme = wa_ekbe-menge.
wa_taxcom-mtart = wa_ekko-mtart.
*Call function module CALCULATE_TAX_ITEM--
CALL FUNCTION 'CALCULATE_TAX_ITEM'
EXPORTING
i_taxcom = wa_taxcom
display_only = 'X'
dialog = diakz
IMPORTING
e_taxcom = wa_taxcom
nav_anteil = hwert
TABLES
t_xkomv = it_komv
EXCEPTIONS
OTHERS = 01.
IF sy-subrc = 0.
ENDIF.
wa_display-bsart = wa_ekko-bsart.
wa_display-knttp = wa_ekko-knttp.
wa_display-bprme = wa_ekko-bprme.
wa_display-meins = wa_ekko-meins.
wa_display-lifnr = wa_ekko-lifnr.
wa_display-ebeln = wa_ekbe-ebeln.
wa_display-bedat = wa_ekko-bedat.
wa_display-bwart = wa_ekbe-bwart.
wa_display-budat = wa_ekbe-budat.
wa_display-matnr = wa_ekbe-matnr.
wa_display-belnr = wa_ekbe-belnr.
wa_display-menge = wa_ekbe-menge.
wa_display-PEINH = wa_ekko-PEINH.
wa_display-dmbtr = ( wa_ekko-netpr * wa_ekbe-menge * wa_ekko-wkurs ) / wa_ekko-PEINH.
WA_DISPLAY-DMBTR = WA_EKBE-DMBTR.
wa_display-srvpos = wa_ekbe-srvpos.
wa_display-mwskz = wa_EKKO-mwskz.
wa_display-WAERS = wa_EKKO-WAERS.
read table it_lfa1 into wa_lfa1 with key lifnr = wa_ekko-lifnr.
wa_display-name1 = wa_lfa1-name1.
wa_display-pstlz = wa_lfa1-pstlz.
wa_display-stras = wa_lfa1-stras.
read table it_t007s into wa_t007s with key mwskz = wa_ekko-mwskz.
wa_display-text1 = wa_t007s-text1.
read table it_j_1imovend into wa_j_1imovend with key lifnr = wa_ekko-lifnr.
wa_display-j_1icstno = wa_j_1imovend-j_1icstno.
read table it_bseg into wa_bseg with key LIFNR = wa_lfa1-lifnr. " wa_ekKO-LIFNR .
wa_display-HKONT = wa_bseg-HKONT.
*read table it_ska1 into wa_ska1 with key sakan = wa_bseg-hkont.
*wa_display-mcod1 = wa_ska1-mcod1.
READ TABLE it_komv WITH KEY kschl = 'JCDB'
kposn = wa_ekko-ebelp
INTO wa_komv.
IF sy-subrc = 0.
wa_display-custduty = wa_komv-kwert .
ELSE.
READ TABLE it_konv INTO wa_konv WITH KEY knumv = wa_ekko-knumv
kposn = wa_ekko-ebelp
kschl = 'JCDB'.
IF wa_ekko-menge <> 0.
wa_display-custduty = ( wa_ekbe-menge / wa_ekko-menge
) * wa_konv-kwert * wa_ekko-wkurs.
ENDIF.
ENDIF.
Get the BED OR EXCISE DUTY
CLEAR : wa_komv , wa_konv.
READ TABLE it_komv WITH KEY kschl = 'JMOP'
kposn = wa_ekko-ebelp
INTO wa_komv.
IF sy-subrc = 0 .
wa_display-BED = wa_komv-kwert .
ELSE.
READ TABLE it_komv WITH KEY kschl = 'JMOQ'
kposn = wa_ekko-ebelp
INTO wa_komv.
IF sy-subrc = 0.
wa_display-BED = wa_komv-kwert .
ELSE.
READ TABLE it_konv INTO wa_konv WITH KEY knumv = wa_ekko-knumv
kposn = wa_ekko-ebelp
kschl = 'JMOP'.
IF sy-subrc = 0.
IF wa_ekko-menge <> 0.
wa_display-BED = ( wa_ekbe-menge / wa_ekko-menge
) * wa_konv-kwert * wa_ekko-wkurs.
ENDIF.
ELSE.
READ TABLE it_konv INTO wa_konv WITH KEY
knumv = wa_ekko-knumv
kposn = wa_ekko-ebelp
kschl = 'JMOQ'.
IF wa_ekko-menge <> 0.
wa_display-BED = ( wa_ekbe-menge / wa_ekko-menge
) * wa_konv-kwert * wa_ekko-wkurs.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
******END OF EXCISE DUTY AND THE BED******************************************************
Get the EDUCATION CESS
CLEAR : wa_komv , wa_konv.
READ TABLE it_komv WITH KEY kschl = 'JEC1'
kposn = wa_ekko-ebelp
INTO wa_komv.
IF sy-subrc = 0 .
wa_display-educess = wa_komv-kwert .
ELSE.
READ TABLE it_komv WITH KEY kschl = 'JESQ'
kposn = wa_ekko-ebelp
INTO wa_komv.
IF sy-subrc = 0.
wa_display-educess = wa_komv-kwert .
ELSE.
READ TABLE it_konv INTO wa_konv WITH KEY knumv = wa_ekko-knumv
kposn = wa_ekko-ebelp
kschl = 'JEC1'.
IF sy-subrc = 0.
IF wa_ekko-menge <> 0.
wa_display-educess = ( wa_ekbe-menge / wa_ekko-menge
) * wa_konv-kwert * wa_ekko-wkurs.
ENDIF.
ELSE.
READ TABLE it_konv INTO wa_konv WITH KEY
knumv = wa_ekko-knumv
kposn = wa_ekko-ebelp
kschl = 'JESQ'.
IF wa_ekko-menge <> 0.
wa_display-educess = ( wa_ekbe-menge / wa_ekko-menge
) * wa_konv-kwert * wa_ekko-wkurs.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
*END OF EDUCATION CESS
Get the SERVICE TAX
clear : WA_KOMV , WA_KONV.
read table IT_KOMV with key KSCHL = 'JSRT'
KPOSN = WA_EKKO-EBELP
into WA_KOMV.
if SY-SUBRC = 0.
WA_DISPLAY-SERTAX = WA_KOMV-KWERT .
else.
read table IT_KONV into WA_KONV with key KNUMV = WA_EKKO-KNUMV
KPOSN = WA_EKKO-EBELP
KSCHL = 'JSRT'.
WA_DISPLAY-SERTAX = WA_KONV-KWERT * wa_ekko-WKURS.
endif.
END OF SERVICE TAX****************************************
Get the EDUCATION CESS ON SERVICE TAX************************
clear : WA_KOMV , WA_KONV.
read table IT_KOMV with key KSCHL = 'JEC5'
KPOSN = WA_EKKO-EBELP
into WA_KOMV.
if SY-SUBRC = 0.
WA_DISPLAY-SEREDUCESS = WA_KOMV-KWERT .
else.
read table IT_KONV into WA_KONV with key KNUMV = WA_EKKO-KNUMV
KPOSN = WA_EKKO-EBELP
KSCHL = 'JEC5'.
WA_DISPLAY-SEREDUCESS = WA_KONV-KWERT * wa_ekko-WKURS.
endif.
******END OF SERVICE TAX ON EDUCATION CESS************************************************
Get the CVD
CLEAR : wa_komv , wa_konv.
READ TABLE it_komv WITH KEY kschl = 'JCV1'
kposn = wa_ekko-ebelp
INTO wa_komv.
IF sy-subrc = 0.
wa_display-cvd = wa_komv-kwert .
ELSE.
READ TABLE it_konv INTO wa_konv WITH KEY knumv = wa_ekko-knumv
kposn = wa_ekko-ebelp
kschl = 'JCV1'.
IF wa_ekko-menge <> 0.
wa_display-cvd = ( wa_ekbe-menge / wa_ekko-menge
) * wa_konv-kwert * wa_ekko-wkurs.
ENDIF.
ENDIF.
Get the total INSURANCE
CLEAR : wa_komv , wa_konv.
READ TABLE it_komv WITH KEY kschl = 'ZIN1'
kposn = wa_ekko-ebelp
INTO wa_komv.
IF sy-subrc = 0 .
wa_display-insure = wa_komv-kwert .
ELSE.
READ TABLE it_komv WITH KEY kschl = 'ZIN2'
kposn = wa_ekko-ebelp
INTO wa_komv.
IF sy-subrc = 0.
wa_display-insure = wa_komv-kwert .
ELSE.
READ TABLE it_konv INTO wa_konv WITH KEY knumv = wa_ekko-knumv
kposn = wa_ekko-ebelp
kschl = 'ZIN1'.
IF sy-subrc = 0.
IF wa_ekko-menge <> 0.
wa_display-insure = ( wa_ekbe-menge / wa_ekko-menge
) * wa_konv-kwert * wa_ekko-wkurs.
ENDIF.
ELSE.
READ TABLE it_konv INTO wa_konv WITH KEY
Hi Ingo,
Thanks for the reply. But let me rephrase my question. In the Bex we get a extra row called overall result in the result set which gives the correct count/total/average based on exception aggregation. The question is how we show the overall result row in the crystal or rather how can we map it into crystal. So i thought as of now we should create a formula to compute the overall result and display it.
Hope I am clear this time in asking the right question.
Many many thanks in advance for your reply.
Kind regards,
Shiva. -
Hi all,
could please explain how to test the payload in xi and with steps.
Thanks in advance,
RadhikaHi Radhika,
You can test in three ways.
1.) In message mapping directly give the relevant data and then execute. Here you can test whether the mapping is correct or not.
2.) In Integrstion Directory after completing and activating the Configuration, in tool you can find the Test Configuration tab. There you can give the sender and receiver details along with payload. Here you can test whether the Configuration is correct or not.
3.) In RWB in COmponent monitoring. Select the Integration Engine Monitoring. Here give the sender and receiver details, Interface name, name space, Quality of service.
Now give user name and pass word.
Paste the payload from massage mapping and then press test tab. Here yoyu can directly send the message from XI server to the receiver system.
Ok,
Jeevan -
How to test the rule if multiline container is passing to the task?
Hi Experts,
I am working on leave workflow. I have to get the approvers based on no of days of leave and leave type. I am getting these details in ITEMS_TAB internal table. I am passing this table to a rule. Now my problem is when I tried to simulate the rule I am not getting any input screen to enter the data.
ITEMS_TAB is an internal table type of "PTREQ_ITEMS_WF_TAB_FLAT".
In the rule I have created a container by selecting the radiobutton "ABAP Dict. Data Type" and entered the above reference parameter is it right way?
Is it possible to test the rule independently if I use multiline container as import parameter in my rule? If so can anybody please tell me how to test the rule?
Thank You.
Srija.Hi Pavan,
Thank you.
To copy the values I am not getting any input screen to input the values. I observed one thing that the type that I am referring in the Rule is a deep structure. Is this is the reason that I am not getting the input screen to enter the values?
I tested by creating aother rule by taking a field for that rule I am getting the input screen to simulate the Rule.
Can you please suggest if the rule will not work then what I have to do? without the rule how can I get the agents?
Thank you.
Srija -
How to get the reverse color of a color
how to get the reverse color of a color
thanksint red = Math.abs(255 - oldColor.getRed());
int green = Math.abs(255 - oldColor.getGreen());
int blue = Math.abs(255 - oldColor.getBlue());
java.awt.Color inverseColor = new java.awt.Color(red, green, blue);
Where oldColor is a java.awt.Color object.
Hope this is want u need !!! -
How to test the PMS/apprisal template
Hi experts,
We have completed the configuration of Apprisal templete.
With OOHAP_BASIC,PHAP_CATALOG_PA we have completed the process along with status and substatus,staus flow.
I struckup at this juncture.
How to test the entire process after the configuration.
Please advice.
Regards,
Sairam.Hi Sairam,
To test the PMS process, please follow the below steps :
1. Go to PHAP_CREATE_PA and select your template. Enter the details for appraisee, appraiser, reviewer ( if applicable ) and also the start date and end date. Save the document.
2. Go to PHAP_ADMIN_PA and select the template/appraisee id in the appraisee column in the selection screen and execute. Select your appraisal document and then select from Menu- Appraisal Document->Change Status and select your initial status and sub status.
Now you can login to Portal/R3 with the user and start testing. The substatus will move automatically based on your workflow. Once you complete a particular status say 'In Planning' you need to manually change the status again from PHAP_ADMIN_PA to 'In Review'.
Get back to me in case of any queries.
Regards,
Sachin -
How to test the connection between DSD backend and DSD connector
Dear all,
I am configuring the MDSD scenario .. and i want to insure that my customization is correct
How to test the connection between DSD Backend and DSD connector ??Hi Viren,
The problem is:
We have a new BW system. The basis people asked me to check the connection between this BW system and the R/3. There is only one client for now(100). I have logged into 100 and tried executing RSA1 to check the connection, but it gave a message box saying "You can only work in Client 000". Then I have treid logging into 000(just to make sure) and tried executing RSA1. Even here I got a message saying "The SAP BW system must not be operated in client 000". Now, I am not sure of what is wrong in clien 100. I am not sure if I have to do some settings before I access RSA1 or any other BW transaction. Could you please help me in this.
Also, I just checked the RFC destinations in BW. There is a destination created for our R/3 and I have noticed that they have given a remote UserID and password for remote login. I tried to check the Remote UserID in SU01 but there is no userID with that name. Could this be a problem?
Thanks,
RPK. -
How to test the modified script (Global Dunning)
Hi all,
I have a requirement in SAP Script.
I had modified Global Dunning Letter F150_DUNN_01 and the print program is SAPF150D2.
Transaction code is F150.
How to test the script and what is the access path for checking print preview of the modified form.
Do i need to configure anything before testing.
Rewards to all.
Thanks & Regards,
Aarthi.Hi
Your functional consultant will help you to trigger the output of this dunning output
or search in SPRO tcode
o in the related tcode F150
<b>Reward points for useful Answers</b>
Regards
Anji -
Hi,,
The below test data is for SD report which do the monthly batch transfer from Annexure to F-form
Can you please help me how to test the data? and prepare the unit test case.
1. Intra-plant movement of inventory between two plants with the same region Code - In India there are two plants in the state of Maharashtra.
Plant 8600 (Vendor 10999346) -> Plant 8601 - MM# 1003623 / 1013515 / 5214135 / 8788143
NB PO# 6500002231 / ZU PO 4600000500
2. Intra-plant movement of inventory from Plant 8650 - Goa to one Depot Plant
Plant 8613 (Vendor 10999359) -> Plant 8618 - MM# 1003623 / 1013515 / 5214135 / 8788143
NB PO# 6500002232 / ZU PO 4600000501
3. Intra-plant movement of inventory between two Parts plants.
Plant 8650 (Vendor 10999344) -> Plant 8601 - MM# 4908281 / 4908323 / 4908968 / 4922001
NB PO# 6500002233 / ZU PO 4600000502Please go thorugh this ...
eCATT stands for extended Computer Aided Test Tool (eCATT) which is built is testing tool to test SAP system. By using testing tool we can test the entire business process, and we can also use this tool with a third party testing tool (I am not covering this topic). Execution of every test script ends with a log, which explains the results of the test script.
By using eCATT we can do following operations,
· Test transactions, reports, and scenarios
· Call BAPIs and function modules
· Test remote systems
· Check authorizations (user profiles)
· Test updates (database, applications, GUI)
· Test the effect of changes to customizing settings
· Check system messages
For more information go to: eCATT::Extended Computer Aided Test Tool (sdn.com)
Here I am discussing fundamentals about eCATT in detail. You can find very good documentation in sdn.com.
To develop a test script in eCATT we need to follow the following steps,
1. Creating Test Scripts.
2. Creating Test Data Containers[16] .
3. Understanding System Data Containers[17] .
4. Executing Test Configurations.
There is a very good web blog on eCATT in sdn.com which explains eCATT with necessary screen shots. To read document click here Blog on eCATT in sdn.com
For details and the screenshots please see the link
http://www.erpgenie.com/sap/ecatt/
Reward points if it is usefull ...
Girish -
How to Test the individualmapping field and conditions...
Hi Frnds,
I done mapping from source to destination as per tech spec in my scenario based on some conditions
i used node functions also..
But my question is how to test the every mapping filed , condition is correct or not, what i used node function working properly or not...
Regards,
RajHi
If you want to check mapping for individual mapping then in design go to test tab and put your data there and then come again on Design tab and click on any target field fro which you want to check mapping then right click on target field in mpping area and click on Display queue and check whether it is expected output for that particular field mapping.
Regards
Sami
Reward points if useful. -
How to test the performed SAP SCRIPT
Hi friends can any one help for
how to test the performed SAP SCRIPT. What are the necessary codes or anything else for performing itPraveen,
Can you be much clear with your query? What do you mean by performing? Do you mean how to execute it ?
Regards,
Vinod. -
How to test the UDA or Attribute of an ancestor member
Hi everybody !I would like to know how to test the UDA or attribute (I can use both) of the ancestor (or the parent of the parent) of the current member please ?(the current member is on level 0 et the ancestor is on level 2).I tryed some syntax but any result :(Thanks very much for your help... JaspePS : Sorry for my "bad" english, i'm french...
You can try using this IF conditional statement:if (@count (skipnone, (@uda (dimName, myUDA) and @ancest (@currmbr (dimName), -2))) == 1)where:dimName is the dimension of the level 0 member you are testingmyUDA is the UDA you are testingWhat this does is it counts the number of members that meet two criteria. First, it must have the UDA you specify and, second, it must be an ancestor of the current member at a specified level.If the current member has a level 2 ancestor with the UDA, it should return one member.
-
hi
anybody can tell me how to test the adaptors?
regards,
krushiAdapter Monitoring:
Steps:
1. Go to RWB.
2. In the Component Monitoring Select Adapter Engine
3. Select the Adapter Monitoring Tab.
Using this window u cam monitor
>> Installed and Started Adapters
>> Adapters with Error and
>> All the Adapters
Uses:
>>The name of the server on which the selected Adapter Engine was deployed. This can be a server cluster consisting of several nodes.
>>The namespace in which the adapters shipped by SAP are located. If you have created additional namespaces for your own developments or for third-party adapters, these are also displayed.
>>A list of all the adapters available for the selected Adapter Engine. Adapters that are not installed and started, or not registered with the Adapter Framework are GRAYED out. You can select all the other adapters to display additional information. i.e U can see all the Adapters.
If all the adapters are working then it will be displayed in GREEN.
If not then it will be displayed in RED.
If U are not using the adapters in ur scenarios then it will be GRAYED out.
Remember to set the thread to solved when you have received a solution
Use a Good Subject Line, One Question Per Posting - Award Points -
How to test the process chains
hi sap gurus,
Can anybody tell me how to test the Process chains before i load real time data,i run process chains every morning 6.15 am,before that i want to test every process is linked to another.
thanks in advance.Hi,
Scheduling the process is the only way to check whether it is running fine or not. The process chains should be checked first in the Dev server and then in the QA server before transported to Prod.
You can also check the process chain using the "check" button to see if the processes are in the proper sequence or not.
There is a "log" button to keep track of the progress of the chain
suresh
Maybe you are looking for
-
No signal error with mac mini to acer monitor
I bought an Acer monitor and a Mac mini back 11/11 and it has worked fine. I recently moved the computer to a new room and when I set everything up I got a no signal error with the monitor and went to sleep mode. I have tried another monitor (views
-
Icon Preview is not shown for mp3 files in finder
Hi. Recently I noticed icons of mp3 files are no longer as used to be in finder. Previously I had a dark music note icon and when i hover my mouse there was a play button. Now I only see itunes icon in mp3 files. "Show Icon Preview" option is enabled
-
Hi Folks, when i do a billing I am getting a message saying foreign trade data incomplete. Then i went to VF02 transaction and made following changes.. 1. Goto->Header->Foreign trade data/Customs. There i gave values for modeoftransport Border and D
-
U110 How to Retain External Monitor Resolution
I'm trying to help someone with an IdeaPad U110 and an external monitor. The Lenovo allows me to login with an external keyboard and monitor but as soon as it boots Windows, the external monitor goes dark and I have to choose FnF3 each time to re-en
-
Ever since I downloaded the latest version of iTunes (6.0.1), I can no longer print playlists. After I make all the selections (I just want text) and click "print", I now inevitably get a printer error saying there is a problem with the paper supply.