Images,css not appearing properly after accessing the reverse proxy page.

Usecase :
1) OHS1 with mod_osso agent deployed.
2) OHS1 configured as reverse proxy.It points to the webserver(OHS2) of the app1.
OHS1(mod_osso agent installed)-->OHS2(app1 webserver)
3) httpd.conf entry in OHS1:
ProxyRequests Off
<Proxy *>
Order deny,allow
Allow from all
</Proxy>
ProxyPass /test/ http://tkcltkcl.padma.xxx.com:8088/test/
ProxyPassReverse /test/ http://tkcltkcl.padma.xxx.com:8088/test/
4) The direct url for appl1 works as per expectation. The reverse proxy redirects from the OHS1 correctly to the app1 OHS webserver accessing the app1 url.But the contents in the redirected app1 url are not aligned properly.Images,css,placement of html links are not appearing properly on the page.
Do we need to do any other configuration in the revere proxy setup so as to avoid the misalignment on the redirected page?
Thanks.

Hi:
Thanks for the reply! I have been UTTERLY scrupulous about
keeping precisely time-matched and points-in-my-process-matched
copies of the project folder for logical, "scientific" testing in
RH5 and RH7, on precisely matched content.
I have never even tried to open an RH7-processed copy of the
project in RH5 because I was warned strongly against this action.
It boils down to this; I cleaned up, FANATICALLY, all those
illegitmate filenames, ran the project again in 5, still got
impermissible missing images (and I mean MORALLY impermissible,
because I'm doing the right thing!)
Then, I took that project folder, copied it, and opened the
exact same ingredients, via the .xpj file, in RH7. Same missing
images.
WAIT! Left out something important in first post! Dang; this
was important! I've fixed missing images, had them appear properly
upon compilation, then had others that HAD been right, come out
missing. Have also had reimported, re-placed images come out upon
compilation following repair, and then go missing again on third or
later, subsequent compilations. Maddening.
Am EXTREMELY reluctant to delete CPD file, because the last
time I did that, I lost EXTENSIVE work I'd done on TOC and Index.
Not cool at all.
Hope this wasn't too cranky; truly grateful for help. Just
very frustrated.
Thanks!

Similar Messages

I'm attempting to create a pdf from InDesign and the Illustrator image does not appear properly.

I'm attempting to create a pdf from InDesign and the Illustrator logo does not appear properly. The logo has a light blue color background with a black to white gradiant over it with a multiply designation set at 100%. I flattened the logo in illustrator before importing into InDesign. When the pdf is created, the blue background of the logo drops out and the only thing showing is the graduated screen of black. PLEASE HELP!!!!!!

Thanks for your reply Peter,
I'm on Mac OSX (10.5.8) using Acrobat 7 Professional and Acrobat
Reader 9 to view the pdf. I created it by exporting. Attached is a
screen capture of the letterhead. Since I posted, I sent a test pdf to
my partner's computer eventhough it didn't look right on my system and
she said it looked fine to her. I've restarted my computer and tried
again and still get the same results.
Thanks for your help,
Pat Boullion
Boullion Graphics
281 444-5749
Fax: 281 444-6507
CONFIDENTIALITY NOTICE
The information in this email may be confidential and/or privileged.
This email is intended to be reviewed by only the individual or
organization named above.
If you are not the intended recipient or an authorized representative
of the intended recipient, you are hereby notified that any review,
dissemination or copying of this email and its attachments, if any, or
the information contained herein is prohibited. If you have received
this email in error, please immediately notify the sender by return
email and delete this email from your system.

Charts not appearing properly after upgrade

I have just upgraded from 10g to 11g, i see that all my charts are not displayed as they are in 10g. Like legend names are not appearing, for some charts the whole view is gone, for line bar graps bars are gone like this there are lots of issues in almost all the charts.
What could be the issue, do i have to manually go and correct all of them?
Any help would be apprecialted
Thanks
Ronny

Ronny,
Yes, post upgrade you might see lot of changes in charts. Some of them are listed here,
http://docs.oracle.com/cd/E21043_01/bi.1111/e10544/creatingviews.htm#CHDFJEHA
Regards,
Dpka

After setting the reverse proxy, SSO doesn't work

Hi,
We are facing a problem after setting a reverse proxy. ITS&SSO is working fine for internal users but the problem is with the external users;ITS is working fine for external users but SSO is not working. Does anyone can help us out with this problem ? It is kind of urgent.
Thanks
Serkan

Eric,
Sorry for misunderstanding,
The domain for internal/external users are the same https://external.global.rexam.net/irj/portal
internal.global.rexam.net/irj/portal
But the ITS goes through:
bca.rexam.com

Poster image does not appear in IE

I am having another problem with the poster image feature. In IE7 & 8, the poster image does not appear at all when the player is first loaded. If the page is cached and loaded, the poster image appears fine.
I think this is a bug, but can anyone confirm seeing this or fixing it?
Thanks!

According to the javadoc:
getImage
public Image getImage(URL url,
String name)Returns an Image object that can then be painted on the screen. The url argument must specify an absolute URL. The name argument is a specifier that is relative to the url argument.
This method always returns immediately, whether or not the image exists. When this applet attempts to draw the image on the screen, the data will be loaded. The graphics primitives that draw the image will incrementally paint on the screen.
Parameters:
url - an absolute URL giving the base location of the image.
name - the location of the image, relative to the url argument.
Returns:
the image at the specified URL.
I am confused as to how to use the name after the url.
Should it read something like:
bugimg = getImage("http://g.jtrusty.com/JavaApplet/", "LadyBug.gif");
EDIT: I still get the same error, cannot find symbol at getImage.
Message was edited by:
gnikollaj

When downloading is complete, I can not see, run, nor access the file; it only appears in the "Downloads" window (and not the specified folder) and the only options permitted are to delete it, or to go to the download web site; what's blocking it?

My PC's OS is 'MS Windows Vista Home Premium'. As my initil question states: When downloading, after the download completes, I can not see, run, nor access the file in it's designated folder. The download only appears in the "Downloads" window and the only "Right Click" options permitted are to "Remove From List", "Select All", & "Copy Download Link" I also can not double click to run it. What's blocking it?
I have a similar problem when accessing .zip files that are attachments to my emails. Here, however, I can place the file in a designated folder, however, the .zip file and it's compressed content files are file-typed as "FireFox Document" and I get permissions errors when running an unzip tool.
Why are my download files being quarantined ??? Is there a security setting option I need to change???
To get around this, I'm using IE to download and install these files, but switching back & forth between FireFox & IE is a real pain.

It's your anti-virus not working correctly while scanning. You can turn off the option to scan in Firefox's '''about:config''' by filtering for '''browser.download.manager.scanWhenDone''' and double-clicking that line to change the value to '''false'''

After editing in photoshop cs6 my photoshop edited image does not appear in Lightroom 4

after editing in photoshop cs6 my photoshop edited image does not appear in Lightroom 4 can anyone help?

In Library, set your sort order to Filename instead of Added order and see if the files show up, then.
How are you doing the Save in PS, using Save or Save As—one will show up, one won’t, I think, but I don’t remember which.

Why the photoshop image processor not appear in bridget cc?

Whythe photoshop image processor not appear in bridget cc?

Hello,
I had this problem too after I did the latest upgrade and installed Ps 2014 a day or so ago. Bridge was missing the Photoshop option under Tools. I uninstalled Ps 2014. Then for good measure I uninstalled and reinstalled Bridge. It still wasn't there then all came back after I reinstalled Ps 2014. Good luck.

PO Print preview is not appearing properly for the Bulgarian

Hello Experts,
We are facing an issue on PO output print preview and print.
Where we are expecting the PO output was supposed to print Bulgarian
language.
Bulgarian letters are not appearing properly in PO print preview smart
form
We are able to see the Bulgarian letters in the GUI, when output gets
processed in PO Spool output. And we are not able to see it in the
portal .Its appearing as some junk characters
Could you please provide me any pointers to resolve the issue?
Looking forward your help.
Thank you,
Bharathi.

Hi Ganesh,
Thanks for your reply
Can anybody tell me, is this is because of the PDF issue or output device issue?
If the data is maintained in Bulgarian language, that we can see in portal.
Where when we click on the PO Pint output preview, itu2019s not appearing as some junk characters only
thank you
bharathi

Since v.6.0.2, was installed [I have Win XP] my eBay pages do NOT load properly ... the images cannot be enlarged and I cannot save things to My eBay. Still works OK with IExplorer .... I do not have a clue on the geeky stuff

Since v.6.0.2, was installed [I have Win XP] my eBay pages do NOT load properly ... the images cannot be enlarged and I cannot save things to My eBay. Still works OK with IExplorer .... I do not have a clue on the geeky stuff .... WILL THIS FIREFOX ERROR SOON BE FIXED ?
Don't know what more to ask. I looked at the known problems and couldn't make any sense of the answers

Upgrade your browser to Firefox 8 and check
* getfirefox.com

Mountain lion has killed my mac book pro. After downloading and trying to install, I am stuck in a loop of "not enough room to install on this disk" and not being able to access the old disk's data to open up space.

Mountain lion has killed my mac book pro. After downloading and trying to install, I am stuck in a loop of "not enough room to install on this disk" and not being able to access the old disk's data to open up space.

Nope. It just opened the installer and stayed in the same loop.
It tells me to choose a startup disk but the only option is the HD which it will not use because it says it cannot gather enough information.
Eveything was working fine until the mountain lion failed install.

Rendered images are not appearing on the webpage. works fine on IE. All plugins appear to be present includeing Adobe Flash

rendered images are not appearing on the webpage. works fine on IE. All plugins appear to be present including Adobe Flash

If that only happens on a specific page or domain then make sure that you do not block images on that domain.
See [[Images or animations do not show]]
*A way to see which images are blocked is to click the favicon (Site Identification icon) on the left side of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Go to the Media tab of that "Tools > Page Info" window.
*Select the first image link and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.
*You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
*You can see all image exceptions in Tools > Options > Content: Load Images > Exceptions

Why is the scroll function not working after accessing the voice feature in settings?

Why is the scroll function not working after accessing the voice feature in settings?

For some prerecorded audio files the Transpose slider will not work reliably. I found no clear pattern, when it does and when not.
If all fails, create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library".
Set the current key and tempo, name the loop, and save the loop.
Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
You will be able to transpose the sample as described above, like a regular loop.
For example - a audio file turned into a loop and transposed:

What happens after a year's usage? Will I not be able to access the application anymore?

What happens after a year's usage? Will I not be able to access the application anymore?

You can still purchase CS6 products for the time being:
http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html

Image does not appear in applet.

I am reading the book, Teach Yourself Java in 21 Days.
There is an example in Ch.11 that shows how to load an image into the applet.
I have tried to use the code provided as is along with an image as defined in the code. I have also uploaded the html, class and image to a folder on the web. Unfortunately, the image does not appear in the applet. The image does have an image that I created using ms paint.
Here is the code I am currently using from the book:
import java.awt.Graphics;
import java.awt.Image;
public class LadyBug2 extends java.applet.Applet {
 Image bugimg;
 public void init() {
 bugimg = getImage(getCodeBase(),
 "ladybug.gif");
 public void paint(Graphics g) {
 int iwidth = bugimg.getWidth(this);
 int iheight = bugimg.getHeight(this);
 int xpos = 10;
 // 25 %
 g.drawImage(bugimg, xpos, 10,
 iwidth / 4, iheight / 4, this);
 // 50 %
 xpos += (iwidth / 4) + 10;
 g.drawImage(bugimg, xpos , 10,
 iwidth / 2, iheight / 2, this);
 // 100%
 xpos += (iwidth / 2) + 10;
 g.drawImage(bugimg, xpos, 10, this);
 // 150% x, 25% y
 g.drawImage(bugimg, 10, iheight + 30,
 (int)(iwidth * 1.5), iheight / 4, this);
}I tried placing the image in an images folder and I also tried changing the code to getImage(getDocumentBase(), "ladybug.gif")
as well as tried getImage(getCodeBase(), "ladybug.gif") in order to try and grab the image from the same directory as the class file and the html file.
The image file's name is: ladybug.gif
The code in the html file:
<HTML>
<HEAD>
<TITLE>Lady Bug</TITLE>
</HEAD>
<BODY>

<APPLET CODE="LadyBug2.class" WIDTH=1024 HEIGHT=500>
</APPLET>
</BODY>
</HTML>
I have gotten previous applet examples from the book to work. One of them did have an error in the author's code which I fortunately was able to overcome. This time, I am afraid, the error eludes me.
Thanks in advance.
I do see that there is no start/stop/run in this version, but I believe this should still work because of the init. I am guessing that maybe the problem lies somewhere in there.
Message was edited by:
gnikollaj

According to the javadoc:
getImage
public Image getImage(URL url,
String name)Returns an Image object that can then be painted on the screen. The url argument must specify an absolute URL. The name argument is a specifier that is relative to the url argument.
This method always returns immediately, whether or not the image exists. When this applet attempts to draw the image on the screen, the data will be loaded. The graphics primitives that draw the image will incrementally paint on the screen.
Parameters:
url - an absolute URL giving the base location of the image.
name - the location of the image, relative to the url argument.
Returns:
the image at the specified URL.
I am confused as to how to use the name after the url.
Should it read something like:
bugimg = getImage("http://g.jtrusty.com/JavaApplet/", "LadyBug.gif");
EDIT: I still get the same error, cannot find symbol at getImage.
Message was edited by:
gnikollaj

Images,css not appearing properly after accessing the reverse proxy page.

Similar Messages

Maybe you are looking for