How to transfer service ticket data from ECC6.0 to CRM 7.0 using LSMW?

how to transfer service ticket data from ECC6.0 to CRM 7.0 using LSMW?
Plz suggest me any BAPI or IDOC for that ..
thanks in Advance .

You have to convert your long string to a table of shorter strings.
There may be other ways, but one possibility is to use a loop to process you string.
while (there is something left)
   put the next e.g. 1024 characters in a new row of your table
endwhile
If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right

Similar Messages

  • How to map service contract data from ecc to crm

    Hi Experts,
    Please help me,how to map service contract data from ecc to crm system.
    is there any perticular process.please let me know.
    thanks in advance..

    Hi Srinivasulu,
    Create the service contract type of ECC and also item categories under it in ECC in CRM. Map the number ranges.
    Check the Partners mapping from R/3 to CRM and that will be all.
    I tried but in CRM in the transaction type internal number range is mandatory. So, if you create service contract in ECC with one number it will replicate to CRM but with different number. But you can see ECC number under the transaction history in CRM.
    Good Luck.
    Sharath.

  • Download data from ECC6.0 to CRM

    We want to download data from ECC6.0 to CRM 2.0.
    I am facing an error while trying to use Function  module 'SMW_CALL_MIDDLEWARE'
    to create and post BDOCS in CRM 2.0.
    The BDOCs are getting posted successfully. However, function module is updating 
    only SMO* ( Mapping) tables but not the CRM database tables. Does anyone has any suggestion on this.

    I think your corresponding mobile bridge needs to be properly active. That should take care of posting data from CDB to CRM.

  • How to transfer files like music from mac to ipad? tried it using mac but what happen was opposite!

    how to transfer files like music from mac to ipad? tried it few times but what happen was the opposite.

    If you want to sync your iTunes library on your Mac to your iPad ....
    Connect your iPad to the Mac and launch iTunes. Click on your iPad's name on the left side under the devices heading. Then click on the Music tab - and select the music that you want to transfer. Does your iTunes window look like this - with Sync Music checked and the playlists or albums checked as well like in the photo below?
    When you click on the apps tab do you have Sync Apps checked and all of the apps in the window below checked to sync as well?
    If you select all of the items under the different tabs in iTunes - music, apps, photos. etc. - when you sync - all of the selected content should sync over to the iPad.

  • How to extract audit log data from every document library in site collection using powershell?

    Hi All,
    I have n number of document library in one site collection,
    My query is- How to extract audit log data from every document library in a site collection using powershell?
    Please give solution as soon as possible?

    Hi inguru,
    For SharePoint audit log data, These data combine together in site collection. So there is no easy way to extract audit log data for document library.
    As a workaround, you can export the site collection audit log data to a CSV file using PowerShell Command, then you can filter the document library audit log data in Excel.
    More information:
    SharePoint 2007 \ 2010 – PowerShell script to get SharePoint audit information:
    http://sharepointhivehints.wordpress.com/2014/04/30/sharepoint-2007-2010-powershell-script-to-get-sharepoint-audit-information/
    Best Regards
    Zhengyu Guo
    TechNet Community Support

  • How to transfer Sales order data from R/3 to APO!!

    Hi Techies,
    I am in the process of moving some sales order data for a particular mat/loc combination in cfm1 after creating a integration model iam even activating even in R/3 but after doing this iam not able to view those sales orders in RRP3 t-code IN APO side.
    Kindly let me know what is the procedure to transfer transactional data from R/3 to APO and to do enhancement in CIF which carries Transactional data .
    Problem solving answers would be rewarded duly !!.
    +PKP.

    Hi PKP,
    The field SPEC_STOCK has the description "Key for Special Stock Section" and is linked to schedule line of the PO. This seems to be something linked to special stock, but I am not very sure about the relevance of this field.
    I do not see any related field when I check the order in RRP3 or in RRP2. In standard SAP, you would only be able to use the fields that are already visible in APO. Otherwise you need to add the field to the standard SAP t-code display (read the value from SOMEWHERE and then display it in RRP3. This is possible using Badi /SAPAPO/RRP_IO_COL). Then only you can see the values which you have populated.
    If this field SPEC_STOCK already has some functionality (which it should have, though I am not sure what it is), you might not be able to use it for other purposes (since system does some validations for certain fields).
    You are updating the value for this field in IT_OUTPUT internal table, you also need to add an X in the corresponding field in the internal table IT_OUTPUTX.
    You could try putting this X, so that your changes are considered in CIF, but I am not sure what the impact may be, and you could get a dump also possibly. Even otherwise, since this field doesn't seem to be visible against a PO in APO, I am not sure if this would be helpful for you.
    As far as I could see, I did not find any standard field which could be helpful for you.
    May be if you open a fresh thread and ask for advice on how to send any custom comments for PO to APO, someone could provide some inputs.
    Thanks - Pawan

  • CIN: How to transfer service tax credit from interim a/c to final a/c.

    Hi,
    When a service vendor raises an invoice on our company we post the vendor invoice.At that time the service tax paid goes to the interim service tax a/c.
    When we make payment to the vendor the Service tax credit balance is transfered from interim a/c to final service tax a/c. The final service tax a/c is then used for utilization of service tax to be paid for output services.
    The transfer of service tax credit from interim a/c to final a/c happens when i run the report S_AC0_52000644(Deferred tax transfer), but from April 2011 this is not happening?
    Any idea on why the service tax credit from interim a/c is not getting transferd to final servic tax a/c?
    When i run the report it shows list contains no items?

    Dear Sanjay,
    I have a few doubts in Service tax.
    1. while posting the service tax got Dr and when i'm giving the payment to vendor in the service tax amount no change. you said when you do the payment the service tax amount transfer  from  interim account to  Main a/c. can you give me the solution what i have done mistake and what i need to do till to rectify it?
    2. when i'm running program  S_AC0_52000644 system saying for selected company code no deferred tax. what is the problem ?
    3. how can i clear the service tax open item witch is posted Dr at the time of invoice? what is the process ?
    can you please give me the solutions i have strucked at this stage in service tax. please help to come out from this problem.
    Thanks & Regards,
    sreehari.

  • Please tell me how to transfer all my data from a G4 Tiger to a new mac air computer?

    please help me to transfer all my files from a Ga tiger to my new mac air computer?

    Use Migration Assistant http://support.apple.com/kb/HT1554
    Be aware that some/many of your current apps may not work in Lion. See - Roaring Apps http://roaringapps.com/apps:table
     Cheers, Tom

  • How can I transfer and store data from my PC on the ipad without using icloud

    I am a new user having received the iPad air/2 from my family as an 80th birthday gift. (at my request).
    At this stage my principal usage is to transfer photos for PC to show family when visiting. I tried iTunes but it caused many problems with my PC, so I un-installed it. I found an ap which did the job simply and easily via wi fi transfer.
    My other main usage is to be able to play my music transferred from my PC to the ipad and held in it's memory so that it can be used even when off line.
    In other words iCloud doesn't seem to be able to do this.
    I sent myself a song via an email, downloaded it on to the ipad, listened to it, then closed the email.
    I cannot now find where that song has got to to retrieve... ipad search says it can't find it.
    Basically I want to transfer a folder of music into the ipad and play them back at will.
    Can anyone help me?
    Sorry to be so longwinded.. cheers Ted
    My PC runs Windows 7 64 bit.
    iPad is IOS8 I believe with 64 GB memory.

    You shouldn't be worrying about 'hackers'. Apple have good security & so long as you pick good passwords the data should be safe.
    There are parts of using iOS & iTunes that requires an Apple ID & iCloud, however you can disable many of the feature you do not need, and avoid syncing any files into iCloud. It can be annoying, but a lot of the services help to make backups easy.
    You may want to visit into an Apple store if you are near one, they may try to sell you on the benefits of iCloud (it's kind of their job), but they may also be able to help you get the iPad under control. See if you can get the PC setup with iTunes, that is probably where you need to start.
    Good luck with it

  • How to transfer all the data from Logic pro to other drive (faster)?

    Hi
    I am trying to upgrade the performance of my Mac and decided to upgrade the RAM and to use a dedicated HardDrive for Logic Pro using firewire (i have a mac mini server...). Think the Processor e fast enough...
    How can i transfer all the information for that drive?
    Can i move the media library from the OS drive to the new drive? or has it to stay were initially instaled?
    I moved to Mac because my Windows "Super 16GB QuadCore PC" was giviing me trouble...in relation to connections, critical errors...
    I am a novice on the Mac "ways"...
    Can someone give me directions?

    Logic doesn't store the majority of its data in designated library places, so you can put your session files and audio files wherever you want. If you move the location of something, say an audio file, and logic doesn't know where to find that asset, then it'll present you with a dialog box which asks you if you can tell it where you moved it to, or if you'd like it to go off and search for files of that name for you. They're all just files on a hard disk. There's only a few things which have to be stored in particular places, such as preferences or sampler instruments. Anything that isn't part of the program, you can store it wherever you want. In a session you can have for example all the live parts on one hard disk, and then all your samples on another hard disk. It's all arbitrary and can be defined by you.
    So yes, you can generally keep your media library wherever you want (as far as Logic is concerned).

  • Not sure how to transfer/save ALL data from old SIM card to new iPhone

    1) How can I save/keep/transfer all Messages and Notes when I put my SIM card into a new iPhone? 
        I have done that but only some of the Messages and Notes are there on new phone.
    2)  Also/or:  are all Messages and Notes saved on my Mac whenever I Sync / Update it? 
         And if so, WHERE on my computer do I find them? 
    *  The Apple site says to be sure to Sync phone "to keep all data" (of course) but I want to make sure that includes        ALL Notes and Messages and know where to find them on my computer to truly save and access them. 
    *  I have a 4S and the newer 4S with Siri.  I am going to give the 4S to a daughter and keep the 4S with Siri.
    3) Will the Genius Bar people help me with this if I can't myself, or do I need to go to AT&T (gag)?
    I need simplest of explanations and steps to follow, please!
    Many thank yous,
    Zoesma

    Zoesma wrote:
    Okay -- thanks to you, too!  I've only been using an iPHone since the 3G and had no idea.  Learn something new every day.  I totally  thought it stored the person's personal data so it could go from phone to phone.  Good to know--thanks!
    So it must store phone basic stuff, I guess.  I'll have to look into that.
    I gave you a link that explains how to get info from one iphone to another.

  • How to transfer Windows 3 data from a G3 with a bad floppy drive

    My first Mac was a PowerMac G3 beige tower (233 Ghz) in 1998.  At that time I installed VirtualPC running Windows 3.0 to use a genealogy program that didn't run on a Mac and input all my family data.  I have a 5 inch floppy disk with the data but when I tried to use it to transfer to a newer computer, I got a message that one of the files (of course it had to be the biggest!) was corrupted.  Now the floppy disc drivenon the G3 has failed.  I bought a "new" drive off the Internetn but it doesn't work either.  Windows 3.0 doesn't recognize USB, so I can't use my external floppy drive.  Is there any way I can transfer the data via a direct connection to another Mac?  I have a eMac (educational version of the original iMac, vintage 2002) that still works, also a PowerPC iMac and an Intel iMac.  I will be extremely grateful to anyone who can keep me from having to input all that family info again!

    "I have a 5 inch floppy disk with the data but when I tried to use it to transfer to a newer computer..."
    Do you mean a 3.5" floppy disk, used with the G3's internal FDD?  Unfortunately, long-term data storage on a floppy disk is risky, as degradation of the magnetic oxide on the disk's surface can contribute to file corruption.  The beige G3s had a "SuperDrive" FDD, which unlike a standard PC floppy disk drive, combined data and power on the same ribbon cable connection and didn't use separate cabling for each.  Is the "new" floppy drive that you bought designed for use in a beige G3?
    "Is there any way I can transfer the data via a direct connection to another Mac?"
    Are these same files stored on the hard drive in the beige G3, eliminating the need to read the floppy disk or are they solely contained on the floppy disk?  If the latter is the case, you still need a working FDD to read the disk, even with a networked connection between the beige G3 and the eMac or PowerPC iMac.  If you can transfer the files to a newer Mac, were you planning to install VirtualPC on the newer Mac, to run the Windows 3.0-based program and read them?

  • How To Transfer the master data from R/3 to APO System

    hi this is mohamed .i m new to APO..
    can any one guide me the configuration for transferring the master datas to APO system.i m using scm 4.0 version..
    Thanks in advance
    Regards
    Mohamed.

    Welcome to SDN.
    refer this link
    creating integration model
    Give ur mail id i will send the document which i have.
    With regards.
    Maya.

  • How to transfer my backed data from my external hard drive to new user

    I have backed up my profile using Time Machine onto an external hard drive. I have opened a new user name on the same iMac but have not been able to transfer my backed up profile to this new user name. I see that my Launchpad apps are there but cannot see my files. I thought that once I used Migration Assistant to do this, my iMac would look exactly the same as the original profile and have my files visible etc. My files are not here. What am I doing wrong? Have I missed out a step? Thank you!

    If you deleted the old user, try to inherit the backup.
    Inherit a Backup
    Inherit a Backup (2)
    If the old user is still there, log in as the older user and copy the file to the new user's Public/Dropbox. Do this at the hard drive level/Users so you can see both users.

  • Transfer of customer data from R/3 to CRM

    Hi Friends,
    We have a R/3 4.7 server and a CRM 4.0 . Currently we are exchanging some data between these systems.
    We have a requirement to send customer details to CRM from R/3.
    Is there any BADI or User exit or function module which is used to fill the BDoc structure before it is transferred to CRM?
    Thanks in advance.
    Helpful answers will definitely be rewarded.
    Regards,
    Bhanu

    The data exchange structure is not a BDoc, but a BAPIMTCS structure. It can be accessed using events in R/3 on creation and before sending.
    Depending on the release of the PI in the ERP system you can use these (see notes with search term BP_EXCHANGE_CRM_TO_R3). This should yield some examples for making your own solution. If you made EEWB enhancements of the field, it should become a bit easier to map, see here note 833585 on how to map the EEWB fields to ERP fields.
    Regards, Kai

Maybe you are looking for