How to translate BI objects - Issue
Dear all,
I am referring to the How to guide mentioned above.
I followed each step in the system and end up with a message "No objects selected".
I have the feeling that other settings have to be made beforehand...
Could you help me or give me an alternative way of translating texts in BI objects?
Thxs
LauQ
To be clear, I have followed each step of the known procedures (How to guide and respective notes).
I Always get the same message - not due to authorization problem because I have SAP_ALL.
This is why I think something is missing in the configuration for translating.
Best regards,
Similar Messages
-
How to rotate and translate an object at the same time??
Hi, I have a problem with rotation and translation of an object at the same time. I wrote a behovior class for my object (a cylinder). When some conditions are true the cylinder is added to a robot arm. Then it is translated so that the cylinder would be very close to the arm (looks like the robot is holding it). And now the behavior should also rotate the cylinder because the angle is 0 and it should be 90. I can translate the object or I can rotate the object but when I'm trying to do it at the same time (I want to combine rotation and translation) it doesn't work.
Could anyone help me, please :)You can used to Matrix3f
This object is a rotation and translate matrix
for example:
private void componerTransformada(){
Quat4f rot = new Quat4f((float) this.getRotacionSobreX(),(float) this.getRotacionSobreY(),
(float) this.getRotacionSobreZ(),1.0f);
Vector3f tras = new Vector3f(-4.0f,-4.0f,(-1)*this.getDistanciaDeLaCamara());
this.setTransformacion(new Transform3D(new Matrix4f(rot, tras, 1.0f)));
Quat4f is a matrix of ratation
vector3f is a direction vector
Transform3d is building with Quat4f and Vector3f.
That is work i use this to situe the view of point.
good locky -
FAQ: How do I troubleshoot audio issues when importing .MTS files?
Hello. The link FAQ: How do I troubleshoot audio issues when importing .MTS files?
does not work, and i need the answer please. My imported MTS clips are not playing back audio because it seems that no audio imported with the video. Thanks, Don.Hi there
Audio plays when the object with the audio assigned appears. This is why you hear it when the Button appears.
Try assigning the audio instead to the object that appears when you click the button. Perhaps the caption.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
How to translate the text according the SAP logon
Hi Friends,
I have a report, in the selection screen have 4 radio buttons which characters are displaying in German language , if logon in DE. But not populating in other language (English, French , Italian etc ).
Whenever SAP login in u201CENu201D , is displaying an Information message u201CUntranslated texts from master language DE wi also be displayedu201D.
Please guide me how to translate the text according the SAP logon.
in GOTO-> Translation -> Original language "DE" and traget language is empty.
Regards,
SubashDid you try transaction SE63?
Translation -> ABAP Objects -> Short texts, select object type S3 and either REPT or SCRT, probably REPT since it's a selection screen. -
How to make shape objects clickable/selectable in transformgroups in java 3
I am building a visualizer program that has Java 3D components inside Swing components. I have a branchgroup inside a canvas3d inside a simpleuniverse, which is added to a JTabbedPane. Inside the branchgroup I have multiple transformgroups each with one shape in them (box, cone, sphere, cylinder). Each transformgroup has the ability to rotate, zoom, and tranlate objects because I have incorperated a MouseZoom, MouseRotate, and MouseTranslate object as from the Java 3D library functions (these are applied to each transformgroup every time one is created and added to the branchgroup). My problem is that I am trying to make these shapes clickable/sectable/dragable/dropable on the screen - currently when I try to translate ONE object all the shapes move on the screen and I cannot get just one shape to move (all shapes move when I only want one to). How do I make only one shape move when it is clicked?
I know the question is kind of out there and specific so if anyone knows how to generically give transformgroups/shapes drag and drop properties that would also help a great deal. Does anyone know how to to this? Thanks a ton.shape uses the contains and intersects methods, is that what you need? Without code it is hard to guess what is required.
-
How to translate ABAP report documentation
Hi to everybody
Today I've applied a OSS note, where was required also to create a Report documentation using SE38 transaction.
Of course I've applied the note and create the required documentation in EN language.
Now because teh Report it's an Italian FI localization I need to translate teh Report in IT language.
Using SE38 is possible translate all Text-elements, but is not possibible provide a transaltion of Report documentation.
I've tried to use SE63 as suggested in many discussions, but when I try to translate the RE object documentation instead the long text
I can see this instruction:
/: INCLUDE ZRFIDITBLIST OBJECT DOKU ID TX LANGUAGE E
Can somebody explain how is possible to provide a transalation of this object in another language ?
Thanks for your help.
ClaudioHi Claudio,
Firstly make sure your abap documentation is in active version for English language. Then go to SE63 > Translation -> ABAP Objects -> Long Texts -> L5 -> Choose Reports, Function Groups, Logical Databases and proceed the translation.
Thanks
Hock Lin -
HI folks,
Can anybody let me know how does it effect when we translate the objects in dev and transport them to prod.
My requirement is to translate all German descriptions into English. So My question is, lets say i translated an infoobject(keyfigure) description into english and transported the same. So in prod, Does this translation effects on all the relevant dependent objects(I mean Whereever it is used)?
thanks in advance
Regards
Dubbu.
Edited by: Dubbu on Feb 26, 2009 7:59 AMHi,
Go to se63 and only create there a transport (in Administration) and than in RSA1 click translation button and just select proper object to be translated. I will send this answer in case if somebody has the same problem in the future
Refer the below links,
http://help.sap.com/saphelp_nw04/Helpdata/EN/41/71601b3ab0f34a8e00aa01338c68f3/content.htm
http://help.sap.com/saphelp_crm50/helpdata/en/41/71601b3ab0f34a8e00aa01338c68f3/content.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30a65c3a-2ad5-2910-a4be-88412392cfe5
help.sap.com/bp_biv270/documentation/How_To_Translate_BI_Objects.pdf
Hope it helps you,
Regards,
Ravindra. -
How to make Shape3D object translucent
Hi,
How to make Shape3D object (like Box, Cylinder) translucent? I tried the below option but the box is not becoming translucent at all.
final PhongMaterial redMaterial = new PhongMaterial();
redMaterial.setSpecularColor(Color.rgb(10, 255, 15, opacity));
redMaterial.setDiffuseColor(Color.rgb(10, 255, 15, opacity));
final Box box = new Box(width,height,depth);
box.setMaterial(redMaterial);
When opacity is 1, the color of the box will be Green, when it is 0 the color becomes black.
Is there any way the box can be made translucent?There is at least one unresolved issue concerning PhongMaterial's transparency: RT-28874.
I'm neither able to get it working properly. My red Sphere also fades to black while varying the opacity value from 1.0 to 0.0.
August -
How to migrate the Objects from 3.1c to BI7
Hi,
We are in Functional Upgradation.
How to Migrate the Objects( Infocubes,DSO,Datasources,Rules...etc...) from 3.1C to BI 7.0
Please help me to doing this....
regards,
anilBW Upgrade tasks (BW 3.1C to BI 7.0)
Prepare Phase:
Task How-To Who
Review BI 7.0 feature lists Review BI 7.0 feature lists for possible inclusion in developments. Basis/BW
Obtain the BI 7.0 upgrade guide Download the upgrade guide from http://service.sap.com/inst-guides -> SAP NetWeaver -> Upgrade
Basis/BW
Review all upgrade SAP notes In addition to the upgrade guide, check, download, and review all SAP notes for your upgrade
BI 7.0 Upgrade notes
SAP Web Application Server 6.40 upgrade notes
OS and DB specific upgrade notes
SAP BW Add-on upgrade notes
(e.g. SAP SEM, ST-PI, etc)
Plug-In upgrade SAP notes
Other notes identified in above notes and/or upgrade guides.
Basis/BW
Check DB and OS requirements for the target SAP BW release Check DB version/patch level and OS version/patch level required for upgrade
First check the most current information from the SAP BW homepage http://Service.sap.com/BW -> <SAP BW release> -> Availability
Additionally, the u201CPlatformsu201D link will take you to the main DB/OS page for BI 7.0 and SAP Web AS 6.40.
Note: In some cases there are differing requirements for SAP BW 3.0B/SAP BW 3.1 Content and BI 7.0
Basis
Check SAP BW Add-on upgrade requirements Do you have SAP BW add-ons installed that require additional handling (e.g. SAP SEM, Enterprise Portal Plug-in, etc)?
SAP SEM (SAP BW based components) requires SAP SEM 4.0 which is part of the mySAP ERP 2004 suite.
WP-PI release must be at 6.00 before the upgrade begins. As mentioned before this add-on is merged with PI_Basis after the upgrade.
Basis
Check SAP BW upgrade requirements Minimum Support Package and kernel levels for upgrade
SAP BW Frontend requirements for new SAPGUI, SAP BW BEx Frontend and SAP BW Web applications.
Source system Plug-In requirements Basis
Check compatibility requirements with 3rd party software 3rd Party Reporting tools (example: Crystal)
ETL Tools (example: Ascential, DataStage, etc)
Scheduling tools (example. Control-M, Maestro, etc)
Monitoring tools (example: HP OpenView, Patrol, etc)
Other OS or DB related tools Basis
Check new component requirements for BI 7.0 If SAP BW web reports were developed in SAP BW 2.x, a windows version of IGS 6.40 (Internet Graphics Service) is required for conversion and future rendering of web graphics (i.e. Charts and GIS Maps).
The IGS chart migration will also be required after the SAP BW web report conversion.
If you used or activated any SAP BW Web Applications in SAP BW 3.x, or if you have used charts in SAP BW 2.x web reports, you will need a windows version of IGS 6.40 (Internet Graphics Service) to execute the IGS chart migration after the upgrade.
If ESRI GIS software is in use, a different version of ESRI software maybe required for BI 7.0. (ArcView 8.2?).
If you plan to use Information Broadcasting, please review the requirement for additional infrastructure components such as EP, KMC, Workbook pre-calculation service, and Web AS connectivity to your mail servers.
Detailed information is available in the SAP NetWeaver u201904 master planning guide (http://service.sap.com/instguides -> SAP NetWeaver).
Basis
Test and distribute new SAP BW Frontend
Install and test the new BI 7.0 Frontend (including the new version of SAPGUI for Windows if applicable).
A detailed FAQ on the new BI 7.0 Frontend is available on the SAP service marketplace alias BWFAQ (http://service.sap.com/BWFAQ).
After successful testing, the new SAPGUI for Windows and SAP BW Frontend can be distributed to the BW teams and end users.
Basis
Alpha Conversion:
Ensure that your InfoObject data is consistent from a u201Cconversionu201D perspective (Alpha Converter tool) Check that you have executed the Alpha Converter tool to check the consistency of your InfoObject definitions and data for InfoObjects that utilize the ALPHA, NUMCV and GJAHR conversion exits.
Note: The Alpha conversion is not part of the SAP BW upgrade itself, but the upgrade simply checks to ensure you have successfully executed the check tool.
Transaction RSMDCNVEXIT
Check the system status:
u201CAll Characteristics Have Correct Internal Valuesu201D: The Alpha converter has been successful executed. The upgrade preparation can continue.
u201CNo Check yet/Inconsistent Internal Vales existu201D:
The Alpha converter check has not been executed.
u201CCharacteristics have Inconsistent Internal Valuesu201D:
The Alpha converter tool check has been executed and data problems have been detected. The InfoObject and data must be processed before the upgrade can be started.
BW
Upgrade SAP Note updates Check for newer versions of your SAP notes for the Upgrade.
Tip: The SAP service marketplace offers an option to subscribe to OSS notes so you can be notified of changes when you log on.
Basis/BW
Confirm SAP BW support package, kernel and DB/OS configuration Analyze current Support Package and DB/OS/Kernel configurations in your SAP BW landscape in relation to the SAP BW 3.x upgrade requirements.
Apply necessary support packages, kernel patches, and DB and OS patches to meet upgrade requirements
Basis
Alignment of SAP BW objects within your SAP BW system landscape Check and, where required, re-align SAP BW Objects and developments in your SAP BW system landscape (Development, Quality Assurance and Production).
SAP BW Object differences can impact the quality of testing in the Development and Test environment and can lead to change management issues.
This check is to minimize risk and ensure productive objects are being tested prior to the Production upgrade.
Where alignment issues exist and realignment is not possible, alternative testing plans should be devised.
Basis/BW
Confirm all developments are deployed. Ensure that all SAP BW developments are deployed or they are to be re-developed/tested after the upgrade.
In the DEV system, all SAP BW development transports should be released (i.e. transport created and released) and imported to all downstream systems (i.e. QAS and PRD systems).
For SAP BW developments not already collected in the transport collector, a decision must be made:
Deploy the developments or wait until the upgrade has completed to deploy.
o Development to be deployed should be collected, released, and imported into the QAS and PRD systems.
o Developments that should be deployed after the upgrade should be re-tested/re-developed after the upgrade.
In the QAS or PRD systems, ensure that all SAP BW development transports have been imported prior to the upgrade.
BW
Implement BI 7.0 Business Explorer Frontend Install, evaluate, test and distribute the new BI 7.0 Business Explorer Frontend.
Basis/BW
Pre-upgrade Process:
Download required BI 7.0 support package Stack for inclusion in the upgrade Determine the equivalent support package level of the source SAP BW release and the target SAP BW release.
There is a minimum requirement that you upgrade to at least the equivalent support package level on the target SAP BW release so that you do not lose functionality, corrections, and data.
It is recommended to upgrade to the latest version of all support packages during the upgrade via the upgradeu2019s support package binding functionality.
BI 7.0 Support Packages are delivered via SAP NetWeaver u201904 Support Package stacks (SP-Stacks). It is not recommended to partially apply some of the SP-Stacksu2019 individual support packages. You should apply all of the SP-Stacks support packages at once.
For more information on the SP-Stacks and SAP NetWeaver SP-Stacks, please see the SAP service marketplace alias SP-Stacks (http://service.sap.com/sp-stacks)
You should also review, download, and bind in support packages for all add-on components that are installed on SAP BW and will be upgraded during the SAP BW upgrade (e.g. SEM-BW, ST-PI, etc)
Basis
Apply latest Support Package tool patch Apply latest SPAM patch before executing PREPARE Basis
Validate the SAP BW (ABAP) Data Dictionary and the Database Data Dictionary for consistency Check Database consistency
Transaction DB02:
o Execute ABAP SAP_UPDATE_DBDIFF and re-execute DB02 check. This gives a truer view of the SAP BW objects in DB02.
o Check missing database objects (indices, tables, etc)
o Missing indices may identify erred data loads or process problems
Tip: Missing indices on InfoCubes can be restored by RSRV or ABAP SAP_INFOCUBE_INDEXES_REPAIR
Note: check for running data loads before executing a repair!
o Check DDIC/DB consistency
Verify database objects and consistency
(e.g. SAPDBA check for offline data files)
BW
Remove unnecessary SAP BW temporary database objects Delete all SAP BW temporary database objects:
Execute routine housekeeping ABAP SAP_DROP_TMPTABLES.
This reduces the numbers of database objects that need to be copied during the upgrade.
Note: take care not to delete objects that are in use as this will cause queries, compressions, etc to terminate.
BW
Validate your SAP BW Objects for correctness prior to your upgrade Using the SAP BW Analysis Tool (transaction RSRV), perform extensive tests on all important SAP BW Objects to ensure their correctness prior to the upgrade.
Note: this test should be repeatable so you can re-validate after the upgrade!
Ensure that any inconsistencies are identified and corrected
RSRV has a number of extensive tests and if all checks are executed will consume a large amount of time. Multiple tests can be performed in parallel.
Tip: Some corrections in development can be deployed to other systems via transport in advance of the next upgrade.
BW
Ensure DB Statistics are up to date prior to the upgrade Check DB statistics for all tables.
Tables without statistics, especially system tables, can seriously impact upgrade runtimes.
Check DB statistics for missing Indexes for InfoCubes and Aggregates
o User transaction RSRV to check BW
Check SAP BW Support Package status Check the status of all support packages (via transaction SPAM)
Ensure the Support Package queue is empty
Confirm all applied Support Packages Basis
Check all u2018Repairsu2019 Check for unreleased repair transports
Release all unreleased transports
In your QAS and PRD system, check if all repair transports have been imported (i.e. systems are aligned)
Import missing repair transports into down stream systems. This will avoid differing message and/or errors during the upgrade.
BW
Check InfoObject status Check for revised (modified) InfoObjects that have not been activated.
All InfoObjects should be active or saved (not activate):
o Check all inactive InfoObjects:
Transaction RSD1 (Edit InfoObjects),
click on u201CAll InfoObjectsu201D radio button and click the u201CDisplayu201D button.
Modified InfoObjects are denoted by yellow triangles!
o Determine if revision should be activated or removed.
'Reorgu2019 or u2018Repairu2019 all InfoObjects
This checks and repairs any discrepancies in the InfoObject definition and structures. It is common to have obsolete DDIC and table entries for InfoObjects after multiple upgrades and definition changes. These obsolete entries normally do not effect normal SAP BW operations.
Transaction RSD1 (Edit InfoObjects), Select u201CExecute Repairu201D or u201CExecute Reorgu201D Use expert mode for selective executions.
BW
All ODS data loads must be activated. Activate all inactivated ODS Object requests.
All ODS u2018Mu2019 tables must be emptied prior to the upgrade as a new activate process is implemented
o Inactivated ODS request can be located via the Admin workbench -> u2018Monitoringu201D button -> u2018ODS Status Overviewu201D
BW
All Transfer and Update rules should be active Check for inactive Update and Transfer Rules
o All update rules and transfer rules should be active or deleted.
o Look into the table RSUPDINFO for update rules and search for the version "not equal" to "A". Likewise use the table RSTS for Transfer rules/structure. BW
All InfoCubes should be active Check for inactive InfoCubes and Aggregates (Aggregates are InfoCubes too!)
o All InfoCubes should be activated or deleted.
o Execute ABAP RSUPGRCHECK to locate any inactive InfoCubes. See SAP note 449160.
BW
All Web Report objects should be consistent prior the upgrade. Check the consistency of your SAP BW web objects (web reports, web templates, URLs, roles, etc). All objects should be consistent prior to web object conversion after the upgrade. It is recommended to ensure consistency before the upgrade.
o For Original release SAP BW 3.x:
A SAP BW web reporting objects check can be executed via a new check in RSRV. This is provided via a SAP BW support package.
Please see SAP note 484519 for details.
BW
Backup your system before starting PREPARE Before execution PREPARE, perform a full database backup (including File system). Ensure you can recover to the point in time before PREPARE was executed.
Database admin
Address any instructions/errors generated by PREPARE Address any issues listed in log files Checks. Log generated by PREPARE.
o Repeat PREPARE until all checks are successful. Basis
Complete any Logistic V3 data extractions and suspend V3 collection processes Extract and empty Logistics V3 extractor queues on SAP R/3 source systems.
o The V3 extraction delta queues must be emptied prior to the upgrade to avoid any possible data loss. V3 collector jobs should be suspended for the duration of the upgrade.
They can be rescheduled after re-activation of the source systems upon completion of the upgrade.
Note: If you perform any data loads after executing PREPARE, re-check the status of all delta queues in SAP BW and the source systems(s).
BW
Complete any data mart data extractions and suspend any data mart extractors Load and Empty all Data mart Delta Queues in SAP BW. (e.g. for all export DataSources)
o The SAP BW Service SAPI, which is used for internal and u2018BW to BWu2019 data mart extraction, is upgraded during the SAP BW upgrade. Therefore, the delta queues must be emptied prior to the upgrade to avoid any possibility of data loss.
Note: If you perform any data loads after executing PREPARE, re-check the status of all delta queues in SAP BW and the source systems(s).
BW
Check that your customer defined data class definitions conform to SAP standards Check all customer created Data classes used by SAP BW Objects (i.e. InfoCubes, ODS Objects, Aggregates, InfoObjects, and PSAs) to ensure they conform to SAP standards.
o Check your data class definitions as detailed in SAP Notes 46272 and 500252.
o Incorrect data classes could create activation errors during the upgrade.
BW
Remove unnecessary SAP BW temporary database objects Delete all SAP BW temporary database objects:
Execute routine housekeeping ABAP SAP_DROP_TMPTABLES.
For more information see SAP note 308533 (2.x) and 449891 (3.x).
This reduces the numbers of database objects that need to be copied during the upgrade.
Note: take care not to delete objects that are in use as this will cause queries, compressions, etc to terminate.
Basis/BW
Backups! Before executing the upgrade, ensure that you have a backup strategy in place so you can return to the point where loading was completed and the upgrade started.
Ensuring you can return to a consistent point in time (without having to handle rollback or repeats of data loads) is key to having a successful fallback plan.
Database Admin
Before Execution:
All SAP BW administration tasks should have ceased Cease all SAP BW administration tasks such as Object maintenance, query/web template maintenance, data loads, transports, etc at the beginning of the upgrade.
The Administrators Workbench and the Data Dictionary are locked in the early phases of the upgrade.
Reminder: Users can execute queries until the time that the upgrade determines that the SAP BW System should be closed*
- timing depends on the type of upgrade selected
Basis/Admin
Remove unnecessary SAP BW temporary database objects Repeat the deletion of all SAP BW temporary database objects after you have stopped using the SAP BW Admin workbench*
Execute routine housekeeping ABAP SAP_DROP_TMPTABLES.
For more information see SAP note 308533 (2.x) and 449891 (3.x).
- timing depends on the type of upgrade selected
BW
Check system parameters Check OS, DB, and Instance profile parameters.
Check System Instance parameters for new BI 7.0 specific parameters. See SAP note 192658 for details
Check for any DB specific parameters for BI 7.0
Check for any new OS parameters Basis
Check Database archiving mode Turn database archive log mode back on if it was disabled during the upgrade!
Database Admin
After Execution:
Check the systemu2019s installation consistency Execute Transaction SICK to check installation consistency
BW
Check the system logs Perform a technical systems check.
Example: Check system and all dispatcher logs (inc. ICM logs)
Basis
Apply latest executable binaries Apply the latest 6.40 Basis Kernel for all executables
Tip: use the SAP NetWeaver u201904 SP-Stack selection tool to find all binaries. (http://service.sap.com/swdc)
Basis
Review BI 7.0 Support Packages for follow-up actions. Review SAP Notes for all SAP BW Support packages applied during (bound into the upgrade) and applied after the upgrade:
o Search for Note with the keyword u201CBWu201D, u201CSAPBWNEWSu201D, and u201C<BW release>u201D
o Follow any required instructions identified in the SAP Notes
Basis
Apply latest patches Apply the latest SPAM patch
Apply any required support packages that were not bound into the upgrade.
Basis
Apply additional BI 7.0 Support Packages
(if required) SAP recommends that customer remain current on SAP Support Packages.
Review SAP Notes for all SAP BW Support packages applied in previous task.
o Search for Notes with the keyword u201CBWu201D, u201CSAPBWNEWSu201D, and u201C<BW release>u201D
o Follow any required instructions identified in the SAP Notes
Basis
Resolve any modified SAP delivered Role issues If SAP delivered Roles were modified, then these modifications may incorrectly appear in the upgrade modification adjustment tool (SPAU).
Review and implement SAP note 569128 as required Basis
Configuring Information Broadcasting EP/KMC Connections
If you plan to use the EP integration functionality of Information broadcasting (Broadcast to the EPu2019s PCD, Broadcast to KMC, or Broadcast to Collaboration Rooms):
Ensure the SAP EP is at the same SP-Stack level as your SAP BW system.
Follow the online help documentation to configure and connect the SAP BW system and the SAP EP system. (http://help.sap.com).
For broadcasting to KMC, ensure that KM has the u2018BEx Portfoliou2019 content available.
Basis
Re-check SAP BW Object and consistency Execute RSRV to check SAP BW Object consistency
Repeat tests that we executed prior to the upgrade.
Validate results BW
Check InfoCube views for consistency Check consistency of InfoCube fact table views
It is possible that fact table view /BIC/V<InfoCube>F is missing if a number of SAP BW upgrades have been performed before. See SAP Note 525988 for instructions for the check and repair program.
BW
Perform SAP BW Plug-in (SAPI) upgrade follow-up tasks If required, Re-activate the SAP BW u201CMyselfu201D source system in SAP BW.
The SAP BW internal plug-in (SAPI), which is used for internal data mart extraction and u2018BW to BWu2019 communication, is upgraded during the SAP BW upgrade. The source system is de-activated to prevent extractions and loading during the upgrade.
It may be required to replicate export DataSources and reactivate transfer structures/rules for internal data loads (i.e. ODS Object to InfoCube objects).
o Tip: It is advised to do this step for all export DataSources to avoid possible errors during execution of InfoPackages
Check that all other Source Systems are active.
o Activate as required. Basis/BW
Check SAP BW Personalization is implemented (SAP BW 2.X upgrades will have performed this in the previous task).
Validate that personalization has been activated in your SAP BW system.
Note: It has been observed that in some cases, BEx Personalization has to be re-activated after an upgrade from SAP BW 3.x to BI 7.0. It is advised to check the status of personalization after the upgrade.
Enter the IMG (transaction SPRO), select SAP Business Warehouse -> Reporting relevant settings -> General Reporting Settings -> Activate Personalization in BEx
Check the status of the Personalization settings. All entries should be active u2013 highlighted by an unchecked check box.
To activate highlighted Personalization, click Execute. BW
For SAP BW 2.0B/2.1C -> BI 7.0 Upgrades:
Convert ODS secondary indexes to new standard For SAP BW 2.0B/2.1C -> BI 7.0 Upgrades:
Convert any customer created ODS Object secondary indexes to the new ODS Object index maintenance process.
Re-create all indexes in the ODS Object definition screen in transaction RSA1.
ODS indexes must conform to the new naming convention
BW
Converting IGS chart settings
Convert you existing IGS chart settings (converts IGS chart settings from BLOB to new XML storage format)
Ensure you have the latest SAP Web AS 6.40 IGS (stand alone windows version) installed and working
o Test via transaction RSRT
Execute the conversion process as directed the BI 7.0 upgrade guide.
Note: This step is required for all BI 7.0 upgrades Basis
Backup your SAP BW system Perform a full database backup (including the File system)
Remember to adjust your backup scripts to include new components such as the J2EE engine, pre-calculation service, etc.
Database Admin -
How to translate std. ABAP report in german language to English in SAP
Dear All,
How to translate std. ABAP code in German language to English in SAP ?Hi,
code does not need to be translated.
Data elment descriptions, documentation, text elements, etc. can be translated in the transaction se63.
Also you can translate almost each single object in the editor in the menue goto-translation.
Regards,
Gianpietro -
How to create good object model?
Does anybody know how to create good object model?
Again and again I have to create different object models in various projects. I have to solve a lot of problems.
- Define all entities
- Create objects for it
- Define relations (ususlly i use SQL Databases)
- Define methods to load/edit/save/delete entities.
- Define methods to search and featch set of entities
- Define events for entities (fired when it change)
- the biggest problem is the events for collections. If i got the collection of entities for filter [FirstName = 'Sam'] i want to recieve event NewEntityAdded(), when new entity with FirstName='Sam' is created. But i want not to recieve event when that new entity's FirstName = 'Jack'.
Do anybody know good book or set of articles for such a questions?Hi Facedown12,
Does the issue resolved based on the Tatynan's suggestion? If the issue persists, please post the detail information about
your issue, so that we can make further analysis.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
How to make a object of Directory Class
hi
i want to pass the value "C:\\opt\\lucene\\didyoumean\\indexes\\spell" to the "spellIndexDirectory"
here is my code
package org.tiling.didyoumean;
import java.io.IOException;
import org.apache.lucene.index.Term;
import org.apache.lucene.queryParser.ParseException;
import org.apache.lucene.search.Query;
import org.apache.lucene.search.TermQuery;
import org.apache.lucene.search.spell.SpellChecker;
import org.apache.lucene.store.Directory;
class spell{
public static void main(String args[]){
System.out.println("hi");
Directory spellIndexDirectory = new Directory("C:\\opt\\lucene\\didyoumean\\indexes\\spell");
SpellChecker spellChecker = new SpellChecker(spellIndexDirectory);
String[] similarWords = spellChecker.suggestSimilar("jva", 1);
System.out.println("the suggestion is"+ similarWords[0]);
this way it gives me this errorC:\Documents and Settings\sumit-i\Desktop\didyoumean\didyoumean-1.0\src\java>javac org/tiling/didyoumean/spell.java
org\tiling\didyoumean\spell.java:17: org.apache.lucene.store.Directory is abstract; cannot be instantiated
Directory spellIndexDirectory = new Directory("C:\\opt\\lucene\\didyoumean\\indexes\\spell");
^
1 error
how can i resolve this issue......i am not getting how to pass value to the Directory....
any idea please....You can't instantiate abstract objects. When you need an object of an abstract class, you actually end up with an object of a (non-abstract, a.k.a. "concrete") class. You get those in one of these ways:
1) the abstract class might have a static method that gives you an object of a subclass
2) there might be a different class that has a method (static or not) that gives you an object of the first abstract class.
3) there are subclasses in the API that you can instantiate directly.
As already suggested, re-read the docs. -
I have upgraded my Iphone 4s to 7.0.3 and after that my phone is not charging at all if i leave my phone for charging for more then 24 hours it will charge upto 50%. How do i solve this issue ?? pls suggest ??
Even if it is a hardware problem they should fix it regardless of warranty. If you buy a car and after 1.5 years the doors fall off due to a failure in their design and construction, do you think the car manufacturer could pull off what Apple is trying to do? Yes the car still delivers its primary objective of driving from A to B, but significant functionality has been lost due to their fault.
It is the same with this iPhone wifi problem. Apple are a disgrace, I have had significant Apple Hardware failures with my MacBook Pro and iPhone within 2 years of purchase. Pathetic quality. -
How to call request object of IPortalComponent in KM Scheduler application
Hi
We are reading RFC Table data using JCO Connection Pool(JCOClientPoolEntry. Please find the below teo line code.If we put this code in KM Scheduler application then its throwing error for the request objecct of IPortalComponenetRequest.
IJCOClientPoolEntry jcoPoolEntry = null;
jcoPoolEntry = clientService.getJCOClientPoolEntry(sysId, request);
Can you please let me know how to use request object of IPortalComponent in KM Scheduler application?
Thanks,
SusmitaHello GopalY,
In my experience its not possible to call OLE object in Webui. Maybe customer 3 party application will be supply some web service to handle credit card payments. I think this is the simple way to access 3party application.
Regards,
Zafer, -
I am trying to burn an iDVD, but get message menu contains no buttons. How do I fix this issue?
That essentially means that there's been no videos or slideshows added to the project as each of those items will create a button to play. What have you added to the project?
OT
Maybe you are looking for
-
NEED HELP PUTTING MULTIPLE PAGES TOGETHER IN 1 PDF
HOW DO I PUT 10 PAGES TOGETHER TO OPEN IN 1 PDF?
-
Multiple users in Media Center w/ I Tunes??
I have a PC with Windows Media Center. Multiple accounts , wife, daughter etc. I would like any user to be able to access my I Tunes library to play music while on PC? How do I share the I Tunes with them? Thanks
-
Slow loading when creating a new folder or deleting a folder or file
Hello! Before we begin, a little information. This problem only started occurring AFTER I updated to Mavericks. I have been through every operating system since Snow Leopard and NEVER had this problem until Mavericks. It has been palguing me since I
-
[b]BRAND NEW[/b] - OUT OF BOX IPOD VIDEO NOT BEING RECOGNIZED BY ITUNES
Alright, the topic basically describes what my problem is. This only pertains to my iPod video. Just bought it, opened it, started up computer and iTunes 7 (just updated) (I've had a nano for 5+ months) and plugged it in. It didn't show up. Didn't ap
-
IPhone photos not synced in order using Aperture
I just moved from iPhoto 09 to Aperture, and when I synced my iPhone with Aperture for the first time, Aperture isn't syncing to iPhone in chronological order like it did in iPhoto. All my images, albums, etc. are sorted by image date in Aperture, bu