NEED HELP PUTTING MULTIPLE PAGES TOGETHER IN 1 PDF

HOW DO I PUT 10 PAGES TOGETHER TO OPEN IN 1 PDF?

Thanks Janelle - I do not have that ability with the Epson RX580. Epson just answered my tech support question with this answer:
I am sorry you are experiencing difficulties with your EPSON Stylus Photo RX580. Unfortunately this feature is not available with Mac OS X. You will need a third-party software that will help you with this, such as Poster Print for Mac or Tiler. Please note though that Epson does not support these applications.
So I guess my question becomes what software can I use to print my images on multiple pages. As I do large photo transfers I need to be able to do this with my mac in an efficient way and not try to cut portions of image into seperate print jobs that would be too time consuming. HAve you had any experience with other software. If not I guess the next question  what printer would you recommend that would do this with my MAC. I have included a pic of one of my larger transfers on a cupboard. To do this I needed the image to be tiled on 8 different sheet of 8.5x11 so this is a feature I need through either software or a printer that is easy to use and easily accessible. Thanks Krista
I am inl

Similar Messages

  • I need help putting my printer together hp photosmart cn218a b210a how do u find a book on it

    i need help putting it together i had to take it apart there was dog food jammed in it the mice

    Here is a link for the manual.
    http://h10032.www1.hp.com/ctg/Manual/c02456532.pdf
    Here is another link for a video on putting the cartridges in.
    http://www.youtube.com/watch?v=gbZkq01F7do
    ""Click on the WHITE STAR if you would like to say THANKS""
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

  • Link Compositions on multiple pages together?

    Dear Adobe Forum/Community/Team,
    I am asking myself, if Adobe Muse has the feature, that you can Link Compositions on multiple Pages together. As example what I need:
    Page: About us
    Contains Compositions with 3 Parts (DE , EN , FR) (Yes, language based compositions)
    If customer changes now the page to let's say "Activities", then the compostition on that page reads the state of Page About us, and shows the same language.
    I would be glad, if that is possible!
    Thank you, for your consideration.
    Best Regards
    Alain Thuerig

    Use a server side include (PHP f.i.)

  • I need to edit out parts of a song to cut it down to two minutes for my daughter's talent show. I went to info and it will cut down one part but only one part. I need to put three parts together. I tried adding duplicates of the song to the list but if I

    I need to edit out parts of a song to cut it down to two minutes for my daughter's talent show. I went to info/start time and it will cut down one part but only one part. I need to put three parts together. I tried adding duplicates of the song to the list but if If I change the start time on one it will change it on all of them.

    In your library, right-click the song you want to edit.
    select "get info".
    go to "options" and select the start and stop times for your first section of the song.
    click "OK".
    Find the shortened version of the song in your library. It may take a minute for it to show up. right click it again and select "create (????) version". (the ???? is different for different formats).
    The library will spit out a new, second version of the song which you can rename. I suggest you use the original title and add a 1 to the end.
    Now you can go back to the other version and repeat the process with a different  start/stop time.
    Once you are done editing, you can burn all of your versions to a disk, just make sure your interval time is zero so there are no gaps between edits.
    To keep the orginal song on your library, just go back to the original and put the start/stop times back to the original settings.

  • Multiple page  in only one pdf in adobe forms abap?

    Hi,
    How to display multiple page  in only one pdf in adobe forms abap and avoid > sign in adobe for next page?

    Hi,
    Here are the steps how you can do it.
    1. Create a table.
    2. In the Library palette, click the Standard category and drag the Table object into a cell in the main table.
    Note: If you selected Donu2019t Show This Again in the Insert Table dialog box, when you select the Table object from the Library palette, LiveCycle Designer automatically inserts a table with the same number of columns and rows that you inserted the last time you used the Insert Table dialog box.
    3. In the Insert Table dialog box, enter the number of columns and rows. You can enter a maximum of 20 columns and 50 rows. You can add more columns and rows after the table is created by using the Insert commands on the Table menu.
    4. To add a header row, select Include Header Row In Table.
    5. To add a footer row, select the Include Footer Row In Table.
    6. Click OK.
    Regards
    Runal

  • I need help convincing my workflow administrator on Illustrator PDF presets.

    I need help convincing my workflow administrator on Illustrator PDF presets.
    I work at a company which prints folding cartons, pressure sensitive labels, and film packaging. Esko Automation Engine 12 is our primary workflow. We use PDF files saved directly out of Illustrator as the primary file format. At times, the size of an art file can get fairly bloated from scaled images, effects, transparency, etc. The workflow and Ilustrator have a hard time dealing with the file size. It has been suggested to use the "export" function under the File Menu and save the art file as a "normalized PDF". I honestly believe Distiller isn't even remotely involved when you do this. I tried to make the case to use the settings in the dialog box which appears when you save a PDF out of Illustrator. I know for a fact that this dialog box isn't any different from what you see in Distiller. From my years of experience with Kodak Prinergy, I know things like bicubic downsampling, etc. will not hurt the file. The workflow administrator thinks otherwise. Can anybody point me in the direction of Illustrator PDF presets that would convince him otherwise?

    Brian,
    What is somewhat confusing in your post is your mentioning a capability to export PDF from the File Menu as a normalized PDF file. There is no such option in Adobe Illustrator, at least as it comes directly from Adobe. You may use the File=>Save As dialog to save the file as a PDF file, but PDF is not an option under File=>Export. Furthermore, in terms of the .joboptions provided by Adobe, there is no Normalized PDF joboptions settings.
    You mention Esko. Is it possible that you have one of Esko's products installed that provides proprietary plug-ins to Adobe Illustrator? If so, that may be the source of this Normalized PDF option. Maybe some other participant in the is forum knows more about that, but at Adobe, we don't (for better or worse).
    You mention problems with file bloat due to “scaled images, effects, transparency, etc.” Are you referring to the Illustrator .AI files or to PDF files created from same? If the issue is the .AI file size, the only thing you can do to fix that is to uncheck the save as compatible PDF file option when saving .AI. In terms of PDF files from Adobe Illustrator:
    (1)  Scaled images should not add anything to a PDF file size unless you take such images and attempt to upres them in Photoshop prior to creating PDF. There really is no benefit to be achieved by such upresing of the images; any competent RIP can do that itself just as well as Photoshop.
    (2)  Transparency only adds to the PDF file size if you create PDF with transparency already flattened, or what I would better describe as ruined. Flattening transparency often causes large raster bitmaps and/or very complex groups of vector objects to be created to simulate transparency in an opaque imaging model (such as is supported by PostScript).
    You obviously need to produce PDF that can be accommodated by the rest of your workflow. Since we don't know what that is and whether it conforms to current best industry practices, we cannot make an absolute recommendation for you.
    However, generally speaking, the most reliable PDF print publishing workflow would generally require that you create PDF/X-4 using the PDF/X-4 PDF preset from Adobe Illustrator (or for that matter, from InDesign as well). PDF/X-4 supports full ICC color management (including spot colors), the entire PDF imaging model, and live transparency.
              - Dov

  • Need Help Putting Together a rMBP so I Have Everything I Need...

    Hello-
    I am having trouble getting the right kind of help from "Chat Now" on apple.com and calling in to get my questions/needs taken care of so that when I get the rMBP I will be sure I wil have what I need to go right online and teach the online courses. I even went to the local apple store and woked with a couple sames guys there, but they were not clear in a couple situations on what I would need with the different options the rMBP gives. so I am truning to the great apple forum for additional help.  this might be too much to ask even for tis forum, but if I can learn a little at a time, maybe I can gradually gain the knowledge I need to have a complete and functioning home office for my personal computing needs and my needs as an online teacher at a university back East. My technical knowledge is not the best, so as far as the rMBP goes, a big problem for me is that I do not have the knowledge to make sure I order everything I need with the changes a new rMBP will bring to my current setup (which is just a basic MBP using a wireless router and a USB cable for the printer that I just connect when I need to print). I realizee my current set up on my desk is not the most advanced, but I would need a pro to come to my office and help me get the best set-up for what I am curently using. It seems that the agents I chat with and/or talk to on the phone are aslo lacking in knowledge to help me put together a rMBP that will be ready to fully use and have with the order all that I need so that I do not have to order additional items in a mad rush to be ready for the courses I am teaching online. I have read several articles about the rMBP so that I cold have some knowledge about what I will need but as I said my techie knowledge is lacking. I am looking at the 15" rMBP with all of the full upgrades that the configure option allows one to get. I am not clear if I do run into trouble with my wi fi and have to use my ethernet cable what I will need to do this. I also have programs that are older that I am guesing I will need to install using a DVD player. I would like to hook up the printer I have or a new Canon printer and use it wirelessly, but for now I will most likely be using it with a USB cable. I am not clear on the thunderbolt technology and if I should get any of these cables for any of the connections. I also would like to get a great speaker system and will need to hook that up, but I am not clear on the best way to do this. I have been wanting an iMac, but I am not sure what is a good slection to get and how to connect it to the rMBP or one of the other 2 older MBPs I currently have.
    If somebody could list for me what I would need to have a complete rMBP that will allow me to do these hookups and connections and explain what would be the best way to complete the various connections so that I have all that I will need to get up and running, I would really appreciate it. Because I do not have any USB 3.0 cables or cables for various additional connections, I would need help/suggestions in this area. I realize this is hard to do not seeing my office, but since I will be starting new with the purchase of the new rMBP and hopefully an iMac (and a new Canon printer and new set of great sounding speakers) getting some advice on what I should order for the various connections would be a hugh help. Part of the problem is with the rMBP and not having used one of these in the past. I know some of the differences with this machine like the lack of an internal SuperDrive and the new ports, but I do not know what cables I will need that will utilize the newer technology this machine and an imac will bring to my office.
    Any suggestions are greatly appreciated, even if you do not give me specific answers, but an idea, for example, of what I might need to connect the speaker system (knowing the best way the new speaker system shold be connected to the rMBP and/or the iMac. I am not even clear if I do want to use the iMac with the rMBP for teaching with a larger display what I will need to connect the imac to the rMBP. is this done by an HDMI cable and if so is there a specific type or example you could mention that is on apple.com?

    There are many differences with the new rMBP. There are ports that I am not sure what I would use them for.  Even the ethernet cable I use now to get the internet will not work with the rMBP.  I thought there would be some additional help on here.  as far as configuring the rMBP there are just a few options but the differences between an older MBP and the new rMBP is great.  No need to reply I will turn off email notifications. I gave as much information as I did because in the past I was told to give more information.

  • Need Help, put together information, summary to print

    Hello,
    I need help.
    I want to make a e-learning for school children of the 5th class.
    I have a lot of excersises like a fill-in-text or drag and drop and so on. Now my question is, can I put the information the children puts in together like a summary at the end of the lesson, so the children can print it like a worksheet at the end?

    Happy to provide more detail, but on what, exactly?
    Do you need more detail on how to create the PDF? If so, that's a bit beyond the scope of what we usually do here in the Captivate forums. There are many different ways to create a PDF.
    As for linking the PDF, I already advised. But you may need more detail here. When you insert a Click Box or a Button object in Captivate, you assign an action that occurs when the user clicks the object. The assignment occurs in the properties panel on the right. The typical action is "Go to next slide", but it's a drop-down you may change. I suggested changing it to assign "Open URL or File". Once you do that, you will see a field where you may type the URL or the file name.
    Cheers... Rick

  • I need help putting Classical Music CDs into iTunes

    I need help - this question has lots of subquestions, sorry.
    I have found just a few discussions that deal with this but I am still confused. Forgive me if I get wordy and misuse technical terms - I am trying to learn this thing...
    I'm an iPod newbie and haven't a clue on the best way to organize my many, many classical CDs that I'd like to put onto my iPod Classic 160G. I'd also like to do this with as little fussing around as possible since there are lots of CDs I've got to deal with.
    If each CD is a separate entry [album?] in the playlist and titled with composer name first [ex Bach, Brandenburg Concertos, Titov conductor] I'll have several playlist entries with the same titles, but different contents. No problem really.
    But, should I separate it further, by having each concerto [say] be a separate entry in the playlist - without having to download the CD again. [I've just practiced on a few CDs but I imagine it being a problem if I had to download each CD several times - once for each work] Does it make sense to leave gaps between movements? [I'm not finding a way to remove gaps, though I have seen that suggested somewhere]
    And when I come to play the pieces, if I start playing a work in a playlist, will the iPod keep going from one movement to the next as it makes its way through the playlist - or will it stop at each movement and wait for me to tell it what to do next?
    Advanced Settings - are these the best? I'll be listening to music on an airplane using noise cancelling headphones and at destination attaching iPod to portable speakers to listen to music in hotel rooms.
    General: Keep iTunes Music folder organized - unchecked? [not sure what this means or does or doesn't do]
    Copy files to iTunes Music folder when adding to library - checked?
    Importing: AAC encoder? High quality -128 kbps?
    Thanks for all your help - I know this is a multiple set of questions and perhaps should have been broken up...
    Mrs H
    Message was edited by: Mrs H to fix typos
    Message was edited by: Mrs H

    Thank you so much for your help. You have sorted out a lot of problems for me. I've tried to go through what you wrote, add some more info and I have asked a few more questions below-
    I re-ripped at 256. I too have the 160GB classic so it's good to know that it will take 10,000 tracks as lossless - now I have to re-rip again! I actually hadn't anticipated using the iPod with anything other than our high quality noise canceling airplane headphones, our cheap, portable travel speakers for hotel rooms and our Cambridge sound speakers for our cabin. It's that last set of speakers that makes me think I should follow you advice and go with lossless.
    QUESTION #1 - When I re-rip and do an automatic sync, will the tracks at 256 automatically be replaced by the bigger lossless ones with the same name or should I delete everything from the iPod and begin anew?
    "I create a playlist for each work, using a systematic naming convention..." What I did on my test was create a playlist for each composer breaking it down - ex- Bach:concertos, Bach:sonatas, etc. I have the Album column highlighted and it appears as if the movements stay together in the correct order. I fear that the task might be too large to create a playlist for each work, though that certainly is appealing.
    QUESTION #2 If the Album column is highlighted and the movements are in the correct order in iTunes in the playlist, will they stay that way in the iPod?
    "I tend to use just surnames for composers for example, or at least "surname, firstname"." I finally found in settings on the iPod the way to change sort by composer to last name, first name. In iTunes, the composer column which is imported from the internet search for info on the CDs gives composer with first name first and I can't find a place in iTunes to reverse this. Typing it or erasing the first name will be a huge chore.
    QUESTION #3 Is there a place in iTunes to change the order of the composers' name in the composer column?
    "For compilations etc I still create one for the whole CD or box set"
    I figured this out on my own before you corroborated my idea - I think I'm getting the hang of this...
    "The option iTunes has to "organise your music" is a good one"
    QUESTION #4 - are you referring to the preferences > advanced check box "Keep iTunes Music Folder Organized" ? If not, what are you referring to?
    "I have my library in its own dedicated disk. Wherever you put it, its important to then never change it or doing anything else with it: leave it for iTunes."
    QUESTION #5 "dedicated disk"? as in hard drive? I have been using SuperDuper to back up my Mac to an external HD; I plan to put a copy of the iTunes folder onto yet another HD where I keep copies of all our photos as well.
    "never change it"? I noticed a misspelling "Haendel" from the on-line CD/track info - no problem in fixing that - right? Since you later say you do change info, what is it you are never changing?
    QUESTION #6 - "Disk N of M capability" - what? Where do I find this option? And when you say "for multiple CD albums, don't include the cd number in the album name." Where? when you put the CD into a playlist entry? or just in the list of music in the album column - do you change the listing?
    ONE FINAL QUESTION - when I turn on the iPod when it's not attached to headphones or speakers, and I'm just looking at the screen to see settings or how the syncing worked, the iPod appears to begin playing something as soon as I turn it on. THIS IS A STUPID QUESTION, but I can't find the answer, how to I get it to stop playing without turning the iPod itself off???
    "I hope that helps a little. " A little?? It helps a lot - and I'll award those points as soon as I get it all resolved.
    Thanks again,
    Mrs H

  • Need help putting photos on my iPad

    Trying to put scanned photos on my iPad. I have tried iTunes but under devices there is no photos to select. Need help.

    Photos doesn't appear on the left-hand sidebar under Devices, it appears on the right-hand side in a similar way as for selecting and syncing music, apps etc
    If you are on iTunes 11 on your computer then you may want to re-enable the left-hand sidebar via View > Show Sidebar (option-command-S on a Mac, control-S on a PC), which might make it easier to navigate and my instructions may make more sense.
    To sync photos, connect and select your iPad on the left-hand side of your computer's iTunes (if you've enabled the sidebar), and on the right-hand side there should be a series of tabs, one of which should be Photos - if you select that tab you can then select which photo folders to sync to the iPad. There is a bit more info on this page. You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync.
    If you haven't enabled the sidebar, then from your library click 'iPad' at the top right of the screen and you should get a series of buttons along the top of the screen, including one for Photos

  • New iWeb User needs help regarding multiple sites

    As a new user please excuse me if this has an obvious answer.
    I have 4 web site, very simple, that I have used Frontpage with for years.
    I want to make new websites with iWeb but I am worried I may screw something up.
    I have already created one new iWeb Site and it comes up in the left hand pane as SITE 1.
    I have used that for ages and use a seperate FTP program to publish to my independent Server with no problem. I usually publish to a folder first then use the FTP software to publish to the Server and its fine
    The trouble I have now is probably becasue I don't know how to use iWeb properly but I'll try to explain.
    I made another website and it creates SITE 2 in the left hand pane and I have produced a few pages for that site.
    My problem is that when i go to publish to a folder for the 2nd site, it automatically does the first site as well ?
    In most other programs (like Frontpage) you have to open the individual sites on their own so you can keep everything seperate but iWeb seems to put them all together.
    I now have a folder (on my Apple) with SITE 1 and all its files and in another seperate folder (which I made just for SITE 2) have SITE 1 and SITE 2 and I'm scared to delete the copy of SITE 1 in case it deletes all of it !!
    I wish there was a simple 'OPEN SITE' command in iWeb where you cna pick the opne you want to work on but it doesn't seem to be there.
    If I am missing something obvious I'd be grateful of some advice becasue I really would like to get the other sites made up.
    Message was edited by: russfaefyvie
    Message was edited by: russfaefyvie

    I'll try to make this simple!
    Lets say that you have a website already and you named the site Family.
    You decide you want to create another website for example, My Pets.
    First create a 2 folders a place them where you will remember where they are.
    One of the new folders will be called (Family) (of course both folders are empty at this time. The second folder you created you will name (MY PETS)Ok you with me so far?
    Now lets suppose you have the iweb open to the (Family) website. Quit iweb...
    Go to users/Library/Application Support/iweb. You will see a iweb icon that will say (Domain.Sites2. Drag the domain.sites2 to the (family) folder you just created. Now for your new site that you want to start. (MY PETS) OPEN iweb. You should now be prompted to choose a template. That's because you removed the domain.sites2 out and put it into another folder.
    iweb thinks your are starting a new project and prompts you to choose a template as described earlier. Any pictures you add you should keep them in the separate folder in case you need edit or if you accidentally delete them. For example on the (my Pets site) any pictures you have there you will have in the same folder as the my pets folder you created. What I do is I make additional folders within the site folder I created so I can find things faster. Pets,I would have a pets folder and so on. Do the same for the other folder.(Family)
    Now you created your new website (MY PETS) and you decide you want to go back and work on the (Family) website. Quit iweb. and then go to User/Library/Application Support/iweb... REMOVE the Domain.sites2 (MY PETS) and go to other folder(Family) and drag that Domain.site2 where you previously removed the other domain.sites2.. Open iweb and there it is.
    Tip: When you place a Domain.sites2 into one of the folders you created it is always good to copy the domain.site2 and paste it into the same folder.When you copy and paste a Domain.sites2 the copy of it will say (Domain copy.sites2) This is a good practice to make because if you forget to close a iweb and drag a domain.sites2 out and replace it with another site. iweb will overwrite it when you save and quit. If that happens Just go the the copy you made and drag it to the: users/Library/Application Support/iweb.
    once you drag it to iweb folder click on it once and press enter. You will see the text Domain Copy highlighted. Just delete the word (COPY) make sure it looks like this when your done... Domain.sites2
    Open iweb and there it is.
    Sorry about all the detail as this is a bad habit of mine, but I hope it helps.

  • Noob Needs Help - Importing Html Pages into "My Site"

    Greetings
    I am sure this is a noob question that may have been asked, but I couldn't find it by searching so here goes.
    I jumped right into Dream Weaver, following an online tutorial... and have a decent webpage but I must have skipped some steps or missed something and I would hate to backtrack and do it all over again...
    When I began, I just started working on a HTML page... and now that its done, I want to make it a template etc...
    But I never created a "site" as far as SITE > NEW SITE etc.
    So now that I have, I need to tell DW that "These pages are included... these images are included, all that neat SPRY stuff I have done needs to be "in the site".
    I am looking for a button that says, "Hey dummy, you need to select the pages that are included in your site" but can't find it...
    Any help?
    Thanks, in Advance
    Greg
    www.revfan.com

    Creating  your first web site in DW CS5 -
    http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.html
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb

  • Need Help Fast! Page is dispalying twice in quiz

    I have created a quiz using tips from another post in this
    forum. I insterted a regular slide with a continue button before
    the quiz questions. I insterted another regular slide at the end of
    the questions with a re-take button that points to that first
    slide. This part is working great. When I take the published quiz,
    I click the continue button, and instead of continuing, the slide
    redisplays. I click the button again, and it moves forward like
    it's supposed to. Any advice?
    I'm supposed to have these posted in our LMS today for
    testing, so I need help fast!!! Thanks!!

    What you're seeing is likely the result of a MS patch for IE
    in response
    to the Eolas patent suit.
    MS recently updated IE so any content shown in a page using
    the Embed,
    Object, or Script tags will need to be 'activated' before
    they can be
    clicked (or otherwise 'interacted with').
    Your home computer probably hasn't had the latest security
    rollup
    installed, is why you're not seeing the issue on that
    machine.
    There is a work around, many site mention it. This may be a
    good place
    to start:
    http://www.macromedia.com/devnet/activecontent/articles/devletter.html
    Erik
    dukekelly wrote:
    > Why is it that as soon as you ask for help, you find the
    answer?
    >
    > This isn't a captivate problem at all. It's an IE
    problem. Because the button
    > is a control in Flash, our systems where I work are
    requiring us to click the
    > screen to activate the controls. THEN you have to click
    the button. When I play
    > the movie on my home computer, this phenomenon isn't
    happening. Now, how am I
    > supposed to deal with that??? ASRRGGGHH!!!
    >
    Erik Lord
    http://www.capemedia.net
    Adobe Community Expert - Authorware
    http://www.macromedia.com/support/forums/team_macromedia/
    http://www.awaretips.net -
    samples, tips, products, faqs, and links!
    *Search the A'ware newsgroup archives*
    http://groups.google.com/groups?q=macromedia.authorware

  • Need help adding a page to an existing website

    Hey guys....I'm, as the subject states, a newbie to Dreamweaver.  I am needing to add a page to an existing website.  Simple enough...or so it seems...anyway, I went to the site, copied the source coding, went back to Dreamweaver, pasted into the code box, and up pops the page I copied.  Great!  So then I make my changes so that the page states what I want it to say, link it to what I need to hyperlink it to, then try to upload the page back onto the server....and here's where I get lost...I go to the web to check the site, and the page that I copied and made my own is not there.  The link didn't work and the page is nowhere to be found.  I don't mind whatsoever telling any of the what the site is (not sure if I can do that here), but any help would be very grateful!!!  I'm not sure what I am doing wrong obviously.  Many, many thanks in advance for any help you can give me! 
    Jim

    At the moment the link you refer to goes to the file ashby.php
    http://www.superiorcareplus.com/ashby.php?s=1
    Do you have a page named ashby.php in your site folder?
    If you do copy that and make the changes you require. Save it as whisperer.php
    Now you need to change the link from ashby.php to whisperer.php
    <div class="leftMenu"><a class="menuLeft" href="ashby.php?s=1">Becoming an Alzheimer's Whisperer</a></div>
    So it looks like this:
    <div class="leftMenu"><a class="menuLeft" href="whisperer.php">Becoming an Alzheimer's Whisperer</a></div>
    I'm not sure if it will work because the link has a variable (?s=1) after it but as the links all go to different pages the information probably isn't being fetched from a database. In other words all the pages appear to exist as individual pages. I don't know what 's' the variable refers to.

  • Need help putting movie into project!!

    I have a .wmv format video and I need to put it in iDVD to burn onto dvd, but it won't let it on there and it won't show up in the media tab. Please help me!! Is there some way I can put it on there or is there some way to convert the video so it works with iDVD??

    I use Flip4Mac to open and edit .wmv files in QT, iMovie or iDVD.
    http://www.flip4mac.com/wmv.htm
    Best-
    Mike

Maybe you are looking for