How to Transport Personalized mail?
Hi Gurus
How to Transport Personalized mail From Development servers to quality sever and also Production Server
Cheers
Mahi
hey
personalised mail form cant be transported ,they are made inside the development server or the server which you work at the moment
theere is no request being involved for transporting the mail form
so you just go and create the mail form again
else you can save the request if any generated inside the package and use that package to transport the mail form from one server to other
best regards
ashish
Similar Messages
-
GP: How to transport "E-Mail Templates"
Hi, All...
In Guided Procedures -> Administration workset -> Maintain E-Mail Templates I can only create the new template and edit exists template. But how to transport it to another system?
thanxOh...
It's transrarently included in transport package. It's wonderful. -
How to transport mail form created in CRMD_EMAIL ????
Hi All,
How to transport a mail form created in CRMD_EMAIL ????
Regards,
AshishHi Easwar,
Thanks for replying !!!!
I tried to open up the Form in Tx SMARTFORMS, but it doesnt.
I also tried to change the package by choosing Object directory entry. Even that does not work.
Can you please explaing to me how I transport it using Tx SE01 ????
Regards,
Ashish -
How to send a mail to a person from after completeing bdc .
Hi Xperts,
Please send me a options how to send a mail to a person after completing a bdc or from any report program.
mailed can be a sapuser or other service provider(ex:yahoo,gmail.any thing)
Please Any one i want it now .
Thank You.FUNCTION RS_SEND_MAIL_FOR_SPOO* Email ITAB structure
DATA: BEGIN OF EMAIL_ITAB OCCURS 10.
INCLUDE STRUCTURE SOLI.
DATA: END OF EMAIL_ITAB.
DATA: T_EMAIL LIKE SOOS1-RECEXTNAM. "EMail distribution list
CONSTANTS: C_EMAIL_DISTRIBUTION LIKE SOOS1-RECEXTNAM VALUE
[email protected],[email protected].
Initialization
REFRESH EMAIL_ITAB.
Populate data
EMAIL_ITAB-LINE = Email body text 1.
APPEND EMAIL_ITAB.
EMAIL_ITAB-LINE = Email body text 2.
APPEND EMAIL_ITAB.
T_EMAIL = C_EMAIL_DISTRIBUTION.
--- EMAIL FUNCTION ---------------------------------------------------
REQUIRMENTS:
1) The user running the program needs a valid email address in their
address portion of tx SU01 under external comms -> SMTP -> internet
address.
2) A job called SAP_EMAIL is running with the following parameters:
Program: RSCONN01 Variant: INT User: XXX
This program moves mail from the outbox to the mail server using
RFC destination: SAP_INTERNET_GATEWAY_SERVER
INTERFACE:
1) APPLICATION: Anything
2) EMAILTITLE: EMail subject
3) RECEXTNAM: EMail distribution lists separated by commas
4) TEXTTAB: Internal table for lines of the email message
EXCEPTIONS:
Send OK = 0 otherwise there was a problem with the send.
CALL FUNCTION 'Z_SEND_EMAIL_ITAB'
EXPORTING
APPLICATION = 'EMAIL'
EMAILTITLE = 'Email Subject'
RECEXTNAM = T_EMAIL
TABLES
TEXTTAB = EMAIL_ITAB
EXCEPTIONS
OTHERS = 1.
Function Z_SEND_EMAIL_ITAB
""Local interface:
*" IMPORTING
*" VALUE(APPLICATION) LIKE SOOD1-OBJNAM
*" VALUE(EMAILTITLE) LIKE SOOD1-OBJDES
*" VALUE(RECEXTNAM) LIKE SOOS1-RECEXTNAM
*" TABLES
*" TEXTTAB STRUCTURE SOLI
*- local data declaration
DATA: OHD LIKE SOOD1,
OID LIKE SOODK,
TO_ALL LIKE SONV-FLAG,
OKEY LIKE SWOTOBJID-OBJKEY.
DATA: BEGIN OF RECEIVERS OCCURS 0.
INCLUDE STRUCTURE SOOS1.
DATA: END OF RECEIVERS.
*- fill odh
CLEAR OHD.
OHD-OBJLA = SY-LANGU.
OHD-OBJNAM = APPLICATION.
OHD-OBJDES = EMAILTITLE.
OHD-OBJPRI = 3.
OHD-OBJSNS = 'F'.
OHD-OWNNAM = SY-UNAME.
*- send Email
CONDENSE RECEXTNAM NO-GAPS.
CHECK RECEXTNAM <> SPACE AND RECEXTNAM CS '@'.
*- for every individual recipient send an Email
(see OSS message 0120050409/0000362105/1999)
WHILE RECEXTNAM CS ','.
PERFORM INIT_REC TABLES RECEIVERS.
READ TABLE RECEIVERS INDEX 1.
RECEIVERS-RECEXTNAM = RECEXTNAM+0(SY-FDPOS).
ADD 1 TO SY-FDPOS.
SHIFT RECEXTNAM LEFT BY SY-FDPOS PLACES.
MODIFY RECEIVERS INDEX 1.
PERFORM SO_OBJECT_SEND_REC
TABLES TEXTTAB RECEIVERS
USING OHD.
ENDWHILE.
*- check last recipient in recipient list
IF RECEXTNAM <> SPACE.
PERFORM INIT_REC TABLES RECEIVERS.
READ TABLE RECEIVERS INDEX 1.
RECEIVERS-RECEXTNAM = RECEXTNAM.
MODIFY RECEIVERS INDEX 1.
PERFORM SO_OBJECT_SEND_REC
TABLES TEXTTAB RECEIVERS
USING OHD.
ENDIF.
ENDFUNCTION.
FORM SO_OBJECT_SEND_REC *
FORM SO_OBJECT_SEND_REC
TABLES OBJCONT STRUCTURE SOLI
RECEIVERS STRUCTURE SOOS1
USING OBJECT_HD STRUCTURE SOOD1.
DATA: OID LIKE SOODK,
TO_ALL LIKE SONV-FLAG,
OKEY LIKE SWOTOBJID-OBJKEY.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
EXTERN_ADDRESS = 'X'
OBJECT_HD_CHANGE = OBJECT_HD
OBJECT_TYPE = 'RAW'
OUTBOX_FLAG = 'X'
SENDER = SY-UNAME
IMPORTING
OBJECT_ID_NEW = OID
SENT_TO_ALL = TO_ALL
OFFICE_OBJECT_KEY = OKEY
TABLES
OBJCONT = OBJCONT
RECEIVERS = RECEIVERS
EXCEPTIONS
ACTIVE_USER_NOT_EXIST = 1
COMMUNICATION_FAILURE = 2
COMPONENT_NOT_AVAILABLE = 3
FOLDER_NOT_EXIST = 4
FOLDER_NO_AUTHORIZATION = 5
FORWARDER_NOT_EXIST = 6
NOTE_NOT_EXIST = 7
OBJECT_NOT_EXIST = 8
OBJECT_NOT_SENT = 9
OBJECT_NO_AUTHORIZATION = 10
OBJECT_TYPE_NOT_EXIST = 11
OPERATION_NO_AUTHORIZATION = 12
OWNER_NOT_EXIST = 13
PARAMETER_ERROR = 14
SUBSTITUTE_NOT_ACTIVE = 15
SUBSTITUTE_NOT_DEFINED = 16
SYSTEM_FAILURE = 17
TOO_MUCH_RECEIVERS = 18
USER_NOT_EXIST = 19
X_ERROR = 20
OTHERS = 21.
IF SY-SUBRC <> 0.
RAISE OTHERS.
ENDIF.
ENDFORM.
FORM INIT_REC *
FORM INIT_REC TABLES RECEIVERS STRUCTURE SOOS1.
CLEAR RECEIVERS.
REFRESH RECEIVERS.
MOVE SY-DATUM TO RECEIVERS-RCDAT .
MOVE SY-UZEIT TO RECEIVERS-RCTIM.
MOVE '1' TO RECEIVERS-SNDPRI.
MOVE 'X' TO RECEIVERS-SNDEX.
MOVE 'U-' TO RECEIVERS-RECNAM.
MOVE 'U' TO RECEIVERS-RECESC.
MOVE 'INT' TO RECEIVERS-SNDART.
MOVE '5' TO RECEIVERS-SORTCLASS.
APPEND RECEIVERS.
ENDFORM.
2. -
How to print multiple mail forms in a single run?
How can multiple, personalized letters be printed out from SAP CRM 7.0?
Business requirement:
When for example entrance tickets for a trade fair are sent to a group
of customers, the accompanying letters are to be printed out of the CRM
system.
In SAP CRM 5.0 this was done by creating a marketing campaign, linking
a target group & assigning a mail form to it.
By selecting the communication medium "Printer" it was possible to
print multiple letters in one run and send these documents by mail (not e-mail).
The quantities of letters that have to be sent are too small to
outsource the job to an external service provider (e.g. a printing house).
In the latest version of SAP CRM the communication medium "Printer" is
however no longer available in marketing campaigns.
Does anyone know how this requirement can be met in SAP CRM 7.0?
Thanks in advance for your reply,Thanks for your reaction.
We considered working this way, but the idea was dropped because the quantities of letters that have to be sent are too large (several hundreds) & also because no follow-up of these activities is needed. -
How to send a mail by ckicking the button using java
hi,
how to send a mail by clicking the button (like payroll silp in that contain one button if we click that it autometically go through the mail as a attachment) pls frd to me my gmail is [email protected]Hi,
It seems we are doing the homework for you; to make you start with something; look at the sample code below and try to understand it first then put the right values
to send an email with an attachement.
import java.awt.BorderLayout;
import java.awt.event.ActionEvent;
import java.util.Date;
import java.util.Properties;
import javax.activation.DataHandler;
import javax.activation.FileDataSource;
import javax.mail.Message;
import javax.mail.MessagingException;
import javax.mail.Multipart;
import javax.mail.Session;
import javax.mail.Transport;
import javax.mail.internet.InternetAddress;
import javax.mail.internet.MimeBodyPart;
import javax.mail.internet.MimeMessage;
import javax.mail.internet.MimeMultipart;
import javax.swing.AbstractAction;
import javax.swing.Action;
import javax.swing.JButton;
import javax.swing.JComponent;
import javax.swing.JFrame;
import javax.swing.JTextField;
public class Main {
* @param args
public static void main(String[] args) {
// Create the frame
String title = "Frame Title";
JFrame frame = new JFrame(title);
// Create a component to add to the frame
JComponent comp = new JTextField();
Action action = new AbstractAction("Button Label") {
// This method is called when the button is pressed
public void actionPerformed(ActionEvent evt) {
System.out.println("sending email with attachment");
sendEmail();
// Create the button
JButton button = new JButton(action);
// Add the component to the frame's content pane;
// by default, the content pane has a border layout
frame.getContentPane().add(comp, BorderLayout.SOUTH);
frame.getContentPane().add(button, BorderLayout.NORTH);
// Show the frame
int width = 300;
int height = 300;
frame.setSize(width, height);
frame.setVisible(true);
protected static void sendEmail() {
String from = "me@localhost";
String to = "me@localhost";
String subject = "Important Message";
String bodyText = "This is a important message with attachment";
String filename = "c:\\tmp\\message.pdf";
Properties properties = new Properties();
properties.put("mail.stmp.host", "localhost");
properties.put("mail.smtp.port", "25");
Session session = Session.getDefaultInstance(properties, null);
try {
MimeMessage message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.setRecipient(Message.RecipientType.TO, new InternetAddress(
to));
message.setSubject(subject);
message.setSentDate(new Date());
// Set the email message text.
MimeBodyPart messagePart = new MimeBodyPart();
messagePart.setText(bodyText);
// Set the email attachment file
MimeBodyPart attachmentPart = new MimeBodyPart();
FileDataSource fileDataSource = new FileDataSource(filename) {
@Override
public String getContentType() {
return "application/octet-stream";
attachmentPart.setDataHandler(new DataHandler(fileDataSource));
attachmentPart.setFileName(filename);
Multipart multipart = new MimeMultipart();
multipart.addBodyPart(messagePart);
multipart.addBodyPart(attachmentPart);
message.setContent(multipart);
Transport.send(message);
} catch (MessagingException e) {
e.printStackTrace();
}The sample above is not ideal so you need to go through it and start to ask me some questions if you have
Let me know if you miss something
Regards,
Alan Mehio
London,UK -
HOW TO SEND PERSONALIZED EMAILS WITH THE SAME MESSAGE, BUT WITH THE INDIVIDUAL RECIPIENT'S NAME... (OR NAME AND THE EMAIL ADDRESS) TO ALL ADDRESSES IN THE ADDRESS BOOK - WITH RECIPIENTS SEEING ONLY THEIR OWN NAME WITHIN THE BODY OF THE MESSAGE TO THEM ?
ALSO, HOW TO ELIMINATE ALL THE OTHER NAMES FROM THE LIST - SO THEY CAN NOT SEE WHO ELSE IS ON THE MAILING LIST, AND WHO ELSE IS GETTING THE SAME MESSAGE?In the csv file, the column headers must match the the special references in curly brackets.
So you either change the column header in .csv file or the bit in the curly brackets in the Template email.
To change the column header:
In the example shown below, I wanted to use the first two columns
'First Name', 'Last Name' note the exact spelling.
I also wanted the email address which was in a column called 'Primary Email'.
To make it easier for me, I copied the Primary Email column and inserted it into the third column position and then changed the column header name from 'Primary Email' to 'Email'. (This meant I still had the original column header just in case). see image below.
But you could just change the column header name from 'Primary Email' to 'Email' without moving column about - up to you.
At this point check that all the contacts do have a valid email address.
then save the file.
If you do not want to edit the .csv file, then you need to edit the template email.
eg: {{First Name}} {{Last Name}} <{{Email}}>
change to : {{First Name}} {{Last Name}} <{{Primary Email}}>
If still having an issue, please post two images.
One image needs to show the row of column headers used in .csv file.
The other image needs to show the Template email, so I can see how you have used the curly brackets. -
Hi All:
I am very new to use this type of issue in my application i have requirement like this there is a column in the report where if it cross the limit a mail trigger must send to the concerened person saying limit exceed
how to do this i a very new to use this issue in sending a automatic mail plesae help me how to send a mail
thanks
sudhirI have created your access-list rule without effect ... I try to answer to your questions (sorry, I an a novice in cisco management)
1) How and where is the acl applied ?
I don't know !!! In fact, I think that I don't really know what the acl is !!! Is it the same think that the security policy ?
2) Will you need DNS ?
Yes. But DNS isn't a problem because I have created rule to check dns in my LAN and the DNS requests are OK (for example with a nslookup on my server)
3) Check the hit count
What is the hit count ?
Sorry for my gaps !!!
Thanks for your help -
How can I force Mail to send email requesting a server DSN?
I would like mail to send every message with a server DSN request (the RFC1891 type). I found "tech savvy" info on this archived thread:
https://discussions.apple.com/thread/1965944?start=0&tstart=0
But, I am not a technical person, so, how can I get mail to do this in practise? Or would there be a utility/add-on/plug-in that allows for this?First thing to try: go to System Preferences>iCloud and uncheck 'Mail' in the list there. Then re-check it. Give it time to settle in. Go to Mail Preferences>Accounts (not 'Accounts' in the 'Mail' menu) and select your iCloud account. You should see this:
'Email address' (greyed out) is your login - this should be your @me.com address. The 'Alias' drop-down menu should both versions of your address - @me.com and @icloud.com/ - plus any aliases you have set up.
(the image is from Mavericks, I would expect Yosemite to be much the same).
If this hasn't worked, try clicking the Sign Out button in System Preferences>iCloud. It wouldn't hurt to reboot; then sign back in again. Your iCloud synced data will disappear when you sign out but will reappear when you sign back in (give it time). -
How to Transport iViews from Portal Dev system to Prod system?
Hello friends,
This is an urgent request and it would be of great help if you can give me a solution to this.
We have a Development Portal and a Production Portal. There is no QAS Portal. We are on EP 5.0 and BW is 3.5. Coming to my question, I have created an iView on a Web Application Designer template and assigned it to a role on the Development Portal. The report displays well on the Portal. Now I want to move this newly created iView to Production Portal. I absolutely have no idea how to do this as it is generally a Portal person's work and I have been asked to do this as the Portal person is currently on leave. I need to move the iView to Production as quickly as possible and I would really appreciate if any of you can send me detailed steps on how to do this.
The best way to say thanks in SDN is to assign points to helpful answers and I will not forget that.
Thanks,
Deepthi.Hi Deepthi,
observe these links:
Here is some material:
How to Transport Models Within SAP Analytics
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/035be5d4-0a01-0010-b48a-d4c8c9b020b5
Actually, those pieces are also included in my book "SAP NetWeaver Visual Composer" which is already available from SAP-Press ( http://www.sap-press.com/product.cfm?account=&product=H1932 )
If Usefull Asain the points.
Thanks,
kiran.
Message was edited by:
kiran manyam -
How to send personalized mass emails on my Mac?
I am trying to help my daughter send out letters to colleges via email. How do I send personalized mass email messages on my MacBook Pro? I know how to do it on my PC..... I figured out how to do a mail merge letter, but I would like to send it via email (Mail)
Thanks"I know how to do it on my PC..... "
What program do you use to that on the pc? -
Questions about Personalized MAIL Forms
Hi all!
I got some questions regarding the Personalized Mail Forms in CRM:
1. When you set up the subject part of the Form is it possible to "personalize it too"?
What i mean is it possible to add attributes to the Subject for example the target's name etc. etc., just like you can do it in the mail's body?
2. How can you add system attributes to the mail form's body in a Text: i would like to add the &SFSY-PAGE& and &SFSY-FORMPAGES& attributes specially?
3. If i would like to insert a picture which is on my local drive, it's got inserted but doesn't wanna show, only a red cross. What is the possible problem?
4. I got the same problem when i wanna set up a background for the form, it doesn't wanna show. What are the things that i should check about it?
5. When i set up windows (sub or main either) on a page and i set their attributes like width or length those attributes only affect the Form Painter and don't affect the Form itself.
In Smart Forms when you set a window, it's attributes also affect the Form itself and not just the location of the window in the Form Painter.
What i mean is that i would like to set up different windows on a page on different locations ( like a header or a footer one ) but that only appears in the Form Painter, and it doesn't affect the page itself.
Any solution for this?
Thx in advance for the replies!
Regards, BME Team
Edited by: BME Team on Mar 9, 2008 1:03 PMHi Team,
This link can be useful for you and hope this helps.
Please reward points if useful
http://help.sap.com/saphelp_crm50/helpdata/en/43/18f5095a2704bae10000000a11466f/frameset.htm
Thanks
Srini -
How to remove repeated mails in exchange online outlook web app
Hi,
Any help me , how to remove repeated mails in exchange online outlook web app . As we are in process of migrating mailboxes to office 365 . We have migrated 5 mailboxes . But when i checked outlook web app after migration completed , i could see repeated
mails . When i compared with on premise outlook and office 365 outlook web app , there was lot of differences in read and unread mails .
Customer is expecting , same read and unread count should be replicated to office 365 owa.
Please suggest me to prevent this problem . As this is very urgent to give solution to customer .
Big thanks in advance.
Vinoth .If you've setup Outlook 2013 so it's connected to Office 365, and you've import the .pst file into Outlook, it will be showing as another "mailbox" within Outlook, but default called "Personal Folders" (unless you renamed it when it was created).
You should find that you can simply copy the mail items / folders from Personal Folders into their new home in the Office 365 mailbox. Once that's done Outlook will synchronise the items with o365 which may obviously take a while to complete, but once it's
finished those messages will be available online. -
I'm asking this from a customer point of view...
the customer may need to add an attachment to the personalized mail So, are they allowed to "edit" the personalized mail??? As in they go into the
<i>SAP Menu -> Marketing -> Personalized Mail</i>
and then attach the necessary file?
The attachment may want to attach a different image each time they send out the invitation mail. So how can they do this?
If they can't, then can someone suggest how i can allow them to send attachments together with the invitation mail which will be sent with the survey in campaign automation?
any feedback is appreciatedYou load the attachment in the Campaign Automation as a Document on the campaign element your email is used in.
Then, when the campaign runs, it sends your email you created in CRMD_EMAIL and attaches the file from the campaign.
For the image issue, you might be able to edit your email so the link to the image includes the BP or a Marketing Attribute field in it pertinent to the image name.
For example
< img name="Image95" border="0" src="/images/<b>&Business Partner&.</b>gif" width="56" height="65"> -
E 6 Personal Mail setup -- please help
Hello E6 experts,
can you please help me with the steps involved in setting up personal mailboxes in the E6? It's been asked before here... Every time I begin using the mail setup "wizard" I only reach the option for Mail for Exchange. How can one bypass that to setup Gmail and a regular, Imap personal mail box? What might I be missing? Thanks in advance...Hello again,
I just found out about the problem-- One has to have a SIM card installed (at least for the first time) to be given the options for the various mail services up-front during mail setup. I was trying t do this without a SIM card --using the WiFi connection-- which every other cell phone I have owned allowed me to do. Apparently the E6 is different... Perhaps this will help someone
Maybe you are looking for
-
Problem in a transaction after upgrade
Hi , I am getting a problem in transaction after upgrade. I am getting like "Too Many sctions" in a Tab. Its a custom tab in a standard transaction. But its working fine before upgrade. Could you please suggest me, what can I do for this. some more
-
Why my iphone send me error 1009 , i know i live in iran and ... But appstore doesn't send me error until today that i face with this error
-
Hi, I'm having massive problems with Mail, I upgraded my MacBook Pro from Tiger to Snow Leopard four days ago and everything went beautifully smoothly until today when suddenly my Mail stopped working It constantly crashes, as soon as it is opened it
-
Function 0012 does not exist when saving contact???
Has anyone seen these before?? I also get Function 0022 does not exist errors also? Thanks
-
AIA 11gR1 Mail Message with an XML payload
Hi, I'm currently facing an issue related to message payload which is itself a XML fragment. Use case: The business requires some error out record to notify to the Business users as an XML payload in the mail message body whichis generated in the pro