How to trigger the BPM process from WD Application

Hello All,
I have a simple business process with two ui activities. I am able to start the process from NWA -> Process Repository.
But, I need to start the process from the application. Here is the requirement:
User opens the application. ON completion, the BPM process for approval needs to be triggered. How do i access/obtain process?
If I need to call a particular task in process, How do i do that?
Kindly assist.
Thank you.
Regards,
Sharath

if you want to know the whole story, please refer to the doc
http://help.sap.com/saphelp_nwce72/helpdata/en/44/4d2bb1c6b00597e10000000a155369/frameset.htm
the profile, provider system,endpoint。。。。。
search this doc in sdn, it is a good example regarding the configuration.
How to Use SOA Configuration to Call RFCs and Web Services from within SAP NetWeaver BPM
hope those may help.

Similar Messages

How to start a BPM process from ERP system

Hi,
I created a process in Netweaver Developer Studio with the Process Composer in SAP CE 7.1 BPM, now I want to automatically start the process by saving a SAP document like purchase requisition or purchase order. Therefore I think about implementing a UserExit / Badi or something else.
The following systems are available in my Landascape:
- PI 7.1
- ERP 2005
- CE 7.1 EHP1 with ESR
Does someone have an idea how to start the BPM Process or how to trigger start event?
Greetings,
Christian

the process by saving a SAP document like purchase requisition or purchase order.
Based on your business process, you will have to decide what data should be sent to other system. It could be in the form of Idoc trigger or an RFC calls. If there are non-SAP systems involved, you should be using PI 7.1 too. In that case, you can communicate using Abap proxy call too. For this you may either call an RFC internally in a report and schedule it.
Regards,
Prateek

How to synchronise the job processing from the program.

How to synbchronize the job processing when we are creating jobs from the program.
Thanks,
Ramana.

hi,
yes you can do this..
try this
create a two screen suppose 9000 and 9001..
then right click on your program name...
create a TCODE say TONE..
in this give the screen number 9000..
now again right click on the program name
create a TCODE say Tsecond
in this give the screen number 9001...
hope this will help you..
Regards
Ritesh J

How to Terminate the BPM Process instance

Hi,
If I have an instance of bpm process which fault at the database service task, I want to manually terminate or suspend it. I tried to do it in the workspace as an bpm administrator, however, since the instance pass the human task already, so that i can't suspend the instance. On the enterprise manager console, I don't see any way to terminate one instance. Please advise and it is so important and urgent for me, since our bpm project already on prodction, we have to fix it as soon as possible. Thanks in advance

I'm thinking you're asking what you can do with an instance that has an uncaught exception and not how to have modeled it so they can be properly handled. If you're not catching the exception, in any of the 7 techniques listed below - you're kind of stuck.
If you have a service task and you'd like to handle the exception (manually or other), you have the choices listed below. If you are using none of these, then you're allowing the BPMN engine to handle the exception and about all you can do is to delete the instance in Enterprise Manager.
1) You could add a catch error event to the boundary of the Service task and have that event designated to handle the exception thrown. From the boundary event, you might have a sequence flow to an Interactive activity that lets you hande the exception. Once handled, the instance can continue on with the process.
2) You could add an event subprocess in the same process as the Service activity that has a start error event and have that event designated to handle the exception thrown. From the event subprocess, you might have a sequence flow to an Interactive activity that lets you hande the exception. The difference between this scenario and the first is that the instance in the process has to terminate in the end event in the event subprocess.
3) If your process is invoked as an embedded subprocess, you could add a boundary event (1 above) or catch it in an event subprocess (2 above).
4) If your process is a reusable process invoked from a parent process using a Call activity, if the exception isn't caught inside the called subprocess you could add a boundary event to the Call activity in the parent process. This is similiar to 1 above and you'd need a sequence flow comingin out of the boundary catch error event on the Call activity to go somewhere in the process to handle the exception.
5) If your process is a reusable process invoked from a parent process using a Call activity, if the exception isn't caught inside the called subprocess and it is not caught by a boundary error event on the parent's call activity then you could add an event subprocess in the parent process that has a start error event and have that event designated to handle the exception thrown inside the child process.
6) There is a way to handle exceptions thrown inside a peer process but I'm guessing that might be too much for this post.
7) You can handle exceptions using a Policy outside of the processes. Rather than using the above to handle exceptions, you could use policy based exception handling where you give the policy the different types of faults you want to catch and if you want to retry, let it be handled by someone in Enterprise Manager and if you just want to abort the instance.
If the exception is not caught, then you're in the scenario you're in now and the BPMN engine is where it is unfortunately caught. Although you can see it, it is a non-recoverable exception and about all you can do is delete the instance in Enterprise Manager.
Hope this helps,
Dan

How to initiate a BPM process from Service actions

I need to start a BPM workflow process automatically whenever a document is checked in or imported into WCC, what's teh best way to do that please?

https://blogs.oracle.com/practicalbpm/entry/webcenter_content_ucm_bpm_integration
http://docs.oracle.com/cd/E21764_01/doc.1111/e16759/toc.htm

How to trigger BPM Process from SRM Portal

Hello Experts,
I'am new to BPM and NWDS 7.3 but experienced with Abap and NWDS 7.0 Development...
Before posting, i have been through the forum and couldn't find exact answer to my case..
Basicly what i need to do is to trigger BPM Processes on the BPM Server from SRM Portal Server, I'm aware that i can communicate between these servers with WSDL basicly but how am i going to call the BPM Process' Web Service from Standart SRM Processes?
These processes will be standart ones mostly and also i am new to SRM.
Kindest Regards,

SAP SRM 7.0 user interface is developed in WebDynpro and runs on NetWeaver Portal (Portal was optional component in earlier versions of SRM but it is mandatory component now). So in order to call BPM Webservice (i.e., to trigger a BPM Process) from NetWeaver Portal / SRM 7.0 you can do the following
- Develop a custom application (using EJBs,etc) to call the BPM web service by creating a web service proxy client using NWDS and then deploying it on Portal Server.
- Directly create a model in WebDynpro project by using the WSDL of BPM trigger webservice (using NWDS). You can then call the model in WD User Interface, which in turn will invoke the BPM web service and start the process.
Hope this helps.

How to export deployed SOA process from 10.1.3.4 and to use in JDeveloper

I have a situation where I need to export deployed SOA process from 10.1.3.4 in order to make some changes since the source code is not available. If I export process from BPEL console in 10.1.3.4, I cannot use that in JDeveloper. Will anyone suggest me how to export the deployed process from 10.1.3.4 and then to import in JDeveloper 10.1.3.4. thanks!
Regards,
Suneel Jakka

As far as i remember, i think you have option to export the deployed project as .zip file.
When you deploy using jdev / ant script, the compiled code will be exported as .jar file into the server and in the server context path, the .jar file will be extracted.
When you export from the server, it will zip the extracted content from the context path.
So you need to create a empty project with that name and manually copy paste the project folders into your jdeveloper work space, then compile.
Hope this helps !!
*7) Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question.*
Thanks,
Vijay

How to invoke an other BPM asynchronous process from the BPM process

Do anyone know how to invoke other asynchronous process from the BPM process without using the Web Service URL?

Try using a Service task implemented as a Process Call. Then you select the process you want to call, set the associations or transformation and deploy it to test.
I hope it works for you.
isabelbernely

APD process is active, How to trigger the data from BI to CRM table

Hi All,
I want to send data from BI system(using APD method) to CRM table (ADS method).
I am able to see the table for e.g ABCD in CRM system , i can open using SE11 , but data is 0.
In BI , i have data in DSO and i have mapped it in APD process to data Target to CRM system and APD is active.
Now i want to know how to trigger the data from BI to CRM table? (e.g ABCD).
Please let me know the steps.
Regards.
Nithi.

Hi
Just create a Process Chain to execute this APD method, if the process Chain is already available, then just insert this Process in to the process Chain and execute the Process Chain by normal process, by hoe we do in general.
Hope it solves...

How to trigger the Process Chains in BI from ECC

HI Friends,
Can let me know How to trigger the Process Chains in BI from ECC. Please let me know.........

Hi,
1) Define a Custom ABAP Program (eg : Z_EVENT_RAISE)..........call the FM : BP_EVENT_RAISE or RSSM_EVENT_RAISE..........and trigger an event towards BW .........specify BW as RFC destination...........
2) Create a R/3 Job in SM36>> use the Program Z_EVENT_RAISE ......
3) In BW schedule the PC..........and in the Start variant use this Event..........
http://sapbiwtutorials.blogspot.com/2009/03/how-to-trigger-process-chains-in-bw.html
It can be help full
Regards,
Edited by: subba2010 on Aug 19, 2010 6:51 AM

How to call BPM process from Java

Hi All,
Can anybody help how to call a BPMN process from java.Please give any sample exaple on this.
Thanks,
Ganesh

For 11g BPM please look at this post. Re: Getting while running the BPEL process from java
It references an ATeam example app that can start processes from a web client. But the Java APIs are described too.

How to trigger the automated row fetch process and open modal window by javascript api?

Hi,
I would like to click the one row of column of IR report, to open the modal window of current page. <----------------it is ok. I can use "javascript:openModal('windowID')" to do it.
There is one form in this modal window, Meanwhile, I would like to pass column data to this form.    <--------------------- it is ok also. I can use " $s('P7_ID','column_value');" to do it.
But I don't know how to trigger the "automated row fetch" process of this form to retrieve other field's value in this form.
I tried to use following 2 ways. But failed.
First method:
add one ajax process of "automated row fetch" in "page processing" block, named "get_fetch_data"
when click IR column , call "openModal", and call "apex.server.process ( "get_fetch_data", {}, { success: function( pData ) { } } );" , I tried to call above ajax process to refresh form. It is failed.
Second method:
add one process of "automated row fetch" in "page rendering" block, named "get_fetch_data"
when click IR column, call javascript api "apex.submit" to submit current page , then call "openModal".
such as : javascript:apex.submit({request:'MODIFY',set:{'P7_ID': #ID#}}); openModal('trade');
But it is failed also. the modal page is showed firstly. then page refresh. but modal window will not open again.
I am not sure if my thinking is right. Could you please provide any suggestion?
Thanks in advance,
Ping

Hi Ping,
You can try to set the session state of your modal page's primary key before opening the modal page. Use one dynamic action (on click of IR row) with two true actions. First one to set session state of modal page pk, second on to open modal page.
Or you can add the modal page url as link in your report by extending your query:
select ...
,         apex_util.prepare_url( 'f?p='||:APP_ID||':7:'||:APP_SESSION||'::'||:DEBUG||':7:P7_ID'||COLUMN_VALUE ) as link
from ...
This will give you the url of the modal page, with set primary key.
Regards,
Vincent Deelen
http://vincentdeelen.blogspot.com

Unable to Trigger BPM Process from ECC --- Need Help

Hi All,
I have created a BPM and exposed the Process as a web service. Now when ECC team is trying to trigger the BPM through the provided Web Service, they are getting the below error.
Issue is that the messages fails in ECC with the Status u201CSystem Erroru201D and this is due to reason below :
"The RM Source endpoint requests this acknowledgement by including an
<AckRequested> header block in the message. An RM Destination that
receives a message that contains an <AckRequested> header block MUST
respond with a message containing a <SequenceAcknowledgement> header
block" (Web Services Reliable Messaging Protocol 1.0).
Below is the structure of WSDL I gave to the ECC team.
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://www.example.org/NewWSDLFile/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="NewWSDLFile" targetNamespace="http://www.example.org/NewWSDLFile/">
<wsdl:types>
<xsd:schema targetNamespace="http://www.example.org/NewWSDLFile/">
<xsd:element name="NewOperation">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="NewValue" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
</wsdl:types>
<wsdl:message name="NewOperationRequest">
<wsdl:part element="tns:NewOperation" name="parameters"/>
</wsdl:message>
<wsdl:portType name="NewWSDLFile">
<wsdl:operation name="NewOperation">
<wsdl:input message="tns:NewOperationRequest"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="NewWSDLFileSOAP" type="tns:NewWSDLFile">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="NewOperation">
<soap:operation soapAction="http://www.example.org/NewWSDLFile/NewOperation"/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="NewWSDLFile">
<wsdl:port binding="tns:NewWSDLFileSOAP" name="NewWSDLFileSOAP">
<soap:address location="http://www.example.org/"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Please help.

This below thread solved my problem.
Start BPM Process Trigger - Read timed out
SrinivaS

How to determine the Parent process information in Oracle BPMS 10g

Hi ,
I am trying to retrieve the parent process information given the instanceId and Process Id of an instance of a process from a different process.
I am getting the instanceId of the instance in workspace using the Fuego.Papi.ProcessService and by creating the Filter.
I tried using the ProcessInstance.parent but it needs to be instantiated using the instance details of my referred instance, which i am not able to do.
Can some one shed some light on how to get the parent process details from the referred instance.
Thanks,
shravan.

Hi,
If you mean to increase the request timeout i.e the time when a request is submitted to the server and the response is sent by the server it can be done in httpd.conf file located in $OracleHome/Apache/Apache/conf directory.
The attribute to be used for setting timeout is "Timeout". By default teh value is 600 seconds i.e 5 minutes.
After making these changes , run command dcmctl updateConfig -ct OHS and restart the HTTP Server. Please note these commands need to be run only if the httpd.conf changes are done through text editor.
Hope this helps.
Smita

How to get the XML messages from JMS Queue in BPM

I have one requirement in my application.we are sending XML messages to the JMS Queue.How to get the XML messages from JMS Queue and how to Extract the details from XMl.
can you please send me the code to get the XML messages from the JMS Queue.
Thank you,

Hi,
Sure others will have some other ideas, but here's what I typically do to get the XML from a JMS queue. Inside the Global Automatic that pops the messages off the queue you'd have logic similar to this:
artifactInfoNodes as Any[]
xmlObject as Fuego.Xml.XMLObject = XMLObject()
load xmlObject using xmlText = message.textValue
. . . Once you have this, it's a matter of deciding what you want to do with the message. Most times you'll parse the XML (using XPATH statemens), set argument variables and create a work item instance.
Hope this helps,
Dan

How to trigger the BPM process from WD Application

Similar Messages

Maybe you are looking for