How to turn web on hp prints photo smart hp7510

how to turn web enable

Hi,
From page #23 of its manual
You can download full manual from the following link:
http://h10032.www1.hp.com/ctg/Manual/c03011756.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

How to turn off cs6 photoshop print settings

i recently installed cs6... from cs5.. i have a canon wide format printer that i am accustomed to using when printing my photos... however NOW when i choose to print, it brings me to a Photoshop print settings dialog box... unfortunately, this dial;og box does not allow me to make certain adjustments my canon print dialog box does allow... so how do i turn off the Photoshop print settings and go back to my canon print settings dialog???
please help asap as i am trying to print a photo at this time....
thanks in advance... Dave

Peter and JJ... Yes, i have been to that dialog box... however, this still leaves me with a few less options availible to me in the Canon ipf8400 printer PRINT dialog box.... I cant explain what is missing, because i dont have the dialog box open.... what i can say is that this "Photoshop Print Settings" box has NEVER opened before when i had CS^ when i chose to "print" a photo... a little frustrated right now... but i really do appriciate any help...
thanks again... Dave

How to turn of two-sided printing on Photosmart 7520

How do you turn off the automatic 2-sided printing on the Photosmart 7520?

Hi,
For Windows, please
(a) Double clickk Printer icon on desktop,
(b) Click Set Preferences,
(c) Select Print both sides (normally Flip Long Edge for portrait):
(d) Click Save/Apply
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can i set up my HP photo smart premium printer with my new iPad Air

i don,t know much about these things at all so the answer has to be very easy

Hi,
We can't have an answer because we don't know your printer. HP Photosmart Premium is a series of many printers. Firstly please check to see if your printer in the list:
http://support.apple.com/kb/ht4356
If YES, you can use this to fix/setup:
iPad: http://www.apple.com/support/ipad/assistant/airprint/
iPhone: http://www.apple.com/support/iphone/assistant/airprint/
If NO you have to print using other apps such as :
http://itunes.apple.com/au/app/hp-eprint/id299531647?mt=8
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Printer photo smart 7460

I'm trying to print invitations which are heavy stock cards. I keep getting the message that the paper size or quality is mismatched. There is no option for heavy stock on this printer, Why?

If this is the Photosmart 1000 that uses the #78 and #45 cartridges then I would suggest using the Deskjet 970 driver from Vista.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Cannot turn off double sided printing on HP 8600 OSX v 10.8.4

Hello! I cannot figure out how to turn off double sided printing. I do not see an option in the system print dialogue or on the printing settings itself. When I remove the double sided attachment from the back of the printer - it won't feed the paper properly. Help!

Hi,
Please follow the steps below in order to disable two-sided printing:
On the File menu, select Print. The Print window appears.
NOTE: The Print window might be minimized. Click the blue triangle next to the printer name to see all available settings.
In the expanded Print window you will find next to Copies the checkbox for Two-Sided. Uncheck that box.
NOTE: If the checkbox does not appear within the specific application print dialog, skip this step.
Click the lowest selection box, listed as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
Select Layout from the drop-down menu.
Set the Two-Sided option as Off.
You may save the settings for future use by clicking Presets > Save Current Settings as Preset... Any used preset will remain default till another preset will be used.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can't turn off 2 sided printing on HP7520

I have seen a number of recommended solutions as to how to turn off 2 sided printing on the HP 7520 printing on the HP site. None of them work for Mac OS X 10.9.5 and/or MS Word for Mac 2011 version 14.4.5 .
I am really concerned that HP has not provided an easy way to perform this function (.e.g. on the print options drop down list allow a user to click on a " TURN OFF TWO SIDED PRINTING " option. Acutally concerned is an understatement -- it is totally unacceptable for a company that has specialized in providing printers for decades to have so poorly designed a product and it's software.
Having said that does a solution exist for this design defect ???

Hi,
Follow the steps below in order to disable two-sided printing:
From the application used to print, click the File menu and select Print. The Print window appears.
NOTE: The Print window might be minimized. Click the Show Details button to see all available settings.
At this point I would suggest clicking the Presets menu within the print dialog and save the current settings as a preset (e.g. 7520 Duplex)
Click the lowest selection box listed as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
Select Layout from the drop-down menu.
Set the Two-Sided option as Off.
You may save the settings for future use by clicking Presets > Save Current Settings as Preset... Any used preset will remain default till another preset will be used and these can be used to easily swith between standard and two-sided printing.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Auto turn on of 209 printer on network

Photosmart plus 209a installed wireless on network with Windows 7 PC, Windows XP/SP3/IE7 laptop, and D-Link router. Printing good from PC and laptop. BUT, is there a way I can set up printer so that it will turn on automatically when I select to print? I was able to do this on my old XP PC and old usb wired printer (Photosmart 7960, vintage 2003.) Very convenient.
How about turn off automatically when printing complete?
Thanks, Phil
This question was solved.
View Solution.

I don't understand. Do you want it to go in and out of sleep mode? If so, it should do that.
If you want it to actually turn off and on, well, it won't without touching the front panel.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HT4356 I have just updated my Epson printer to one which supports air print but consider it to be a waste of money as my printer has two paper trays and there is option to choose which try...just "print" How can I print photos via AirPrint from photo tr

Hi,
First-timer on this...Just updated my printer which was less than one year old, to one which had Air Print capabilities. This one is the Epson XP605 which has two trays, one being for photos. Each time I tried to Air Print a photo, it printed from the A4 plain paper tray instead of the Photo Tray.Twice...then I came into my study and changed the printer settings to Tray 1 (photo tray) Photo paper, size 5x7 and Photo Best, but still it printed on plain A 4 paper. Would be most grateful for any help, although I did read on one Apple site that AirPrint may not be able to choose trays!!!! "may not"?? Thanks

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

Clicked on a lightroom template and now can't get it to go away when trying to print my photos. How can I remove the template option when I want to print photos?

Using Lightroom 5 on Mac. Trying to print photos and clicked on a lightroom template to see what it was about. Now all the photos i want to print apply this template and I can't figure out how to clear this template. HELP!!

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

How do I take 300 dpi photos with my iPhone 4s? And how do I export them to my MacBook Pro at 300 dpi to use as I want to print photos.

How do I take 300 dpi photos with my iPhone 4s?
And how do I export them to my MacBook Pro at 300 dpi to use as I want to print photos.
I have been using the standard camera on the iPhone and require 300 dpi to create photo books as the photos are resized according the layout.
Your time and assistance in appreciated.
Thanks

Thanks Tonefox!
After looking at a few of the links I found a mathematical equation that assisted me.
Inches = Pixels/DPI
eg: 3 inches = 300 pixels/100 DPI
Using this equation and the fact that iPhone 4s takes photos that are 3264 x 2448 I was able to work out the largest print I could make with 300 DPI.
Width 3264 pix/ 300 DPI = 10.88 inches
Height 2448 pix/ 300 DPI = 8.16 inches
Therefore, the largest print (with 300DPI) I can make of these photos is 10.88 inches x 8.16 inches.
Which is great!
So is it critical for me to change the dpi in say photoshop or does it not matter as long as I don't go above the 10.88 inches x 8.16 inches?
From what I can gather the smaller I resize the photo the higher the DPI and the bigger I stretch the photo the lower the DPI?
Further clarification will be much appreciated. Thanks

Printing photos from iPhoto 9.5.1 on my printer yeilds garish two color prints. Exporting the photo from iPhoto to desktop then printing from Preview works fine. How can I get good prints from iPhoto?

When printing photos in iPhoto 9.5.1 with my HP inkjet printer the multitude of colors in the photos are reduced to two, Magenta and Yellow. If the photos are exported to my desktop (MacPro) and printed from Preview, the colors in the prints are fine. How do I get iPhoto to print the colors correctly?

Brad
What settings did you use in the Export Dialogue?
When you go File -> Export you get a tabbed box with various options. In the File Export tab you can choose to scale the pics, or keep them the same size, change or retain the format.
Regards
TD

How do i put more than 1 photo on an 8x10 sheet of photo paper so i can print 3 or 4 at a time?

how do i put more than 1 photo on an 8x10 sheet so i dont waste photo paper???

select the photos and go to file ==> print (iPhoto '11) - select the printer, paper size and photo print size (be sure they will physically fit) and click customize - under seettings seect multiple photo pre page (preview will show the results) and click print - select any printer specific options and click print to print
LN

How to turn off Manual Feed envelope prompt on printer scrn LaserJet Pro 200 Color MFP M276?

Somehow, in trying to figure out how to get an envelope to print from the feeder tray (which I found out isn't possible), I turned on something that produces a printer screen prompt that says something like 'Manual Feed" then says the size of envelope and waits for response. This is every time I print an envelope & it's really a pain and I'm not finding where/how to turn this off. Can anyone help? Thanks in advance.

Hello miebs, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having envelope issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Also, What programs are you printing from? Does it occur from multiple programs?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Xerox Phaser 8860 on Network-How to turn off popup print job confirmations?

I recently upgraded to OS 10.6.4 and as expected I needed to reinstall the drivers for a few peripherals. One of which was the Xerox Phaser 8860 which is on the network. Everything works, but now after each print job prints out a window pops up in the center of the screen notifying me that ::Job### has printed on Xerox Phaser 8860::. It causes no serious problems, but it does knock me out of what ever program I am using. Which can get extremely annoying when I'm drawing and I repeatedly get halted mid (pen/brush) stroke. It stays up on the screen for about a minute and a few times it has remained up. There is an option to close, it simply gets really annoying after the 30th time. Common sense would suggest to not draw while a file is on it's way to the printer, but my work day is a constant flow of drawing, printing, color tests and editing. It's not practical or good for deadlines to stop drawing to wait for a print job to come out and the pop up window to go away.
I tested printing from the other computers, which are PC's using various versions of windows and they all come up with the same pop up window (though theirs come up at the bottom right of the screen). They do not receive confirmation windows from the other printers not on the network.
This suggested to me that this was a setting with the Xerox software. However, I spoke to the technical support for Xerox and they said that the pop up window had nothing to do with their software and claim that it had to be generated by the Mac OS 10.6.4.
I am regularly printing from the following programs:
Photoshop, InDesign, Illustrator, Adobe Acrobat, Word, and Excel. The pop out window has acquired while printing files from all of these programs. I doubt that has any relation but I thought I'd add it, just in case.
I would very much like to know how to turn this confirmation notification off in OS 10.6.4. Or if anyone has an thoughts on what software could be the culprit.

In CWIS go to Properties > General > Printer Defaults and disable the Startup page As for garbage prints, That sounds like a PS error. And they are almost always due to improperly embedded fonts. Have all your users switch the following in their drivers (Picture is the global driver, but the regular driver will have the same option.) Essentially by default the printer uses its own locally stored fonts on the jobs, but when the fonts are misunderstood, or unknown it winds up printing wingdings.

How to turn web on hp prints photo smart hp7510

Similar Messages

Maybe you are looking for