How to understand the ups and downs in the signal
Hello,
I have a speed signal and I want to find its ups and downs. How could I find the indexes of the signal where it behave like increasing or decreasing?
For example, on this picture. There is a pink signal. Its my speed and I want to find the indexes of the signal where I emphasize the red circle. There has been a drop in about 1 km/h. I dont want to get the smaller values significant.
Yasemin Barutçu
Electrical And Electronics Engineer
Ok. I uploaded an example of my speed signal. There has been 3 point where I emphasized with the red circle. I pointed these places because there have been drop in 10km/h changes. The others smaller than 10. I want to find the start index and the final index of these 3 places.
Yasemin Barutçu
Electrical And Electronics Engineer
Attachments:
Speed.zip 329 KB
Similar Messages
-
How do I scroll up and down playlists and library on the new iTunes format.? When I ckick on the arrow in the box at the top of the far left column it only switches between the top and bottom 28 songs.
Hi
I looked at the specs for your laptop and there is no HDMI out port for this model but RGB & Headphones out jack should work. Here is the link for closeup views of the ports.
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?modelFilter=L555D-S7005&rpn=PSL...
Click on product tour.
Qosmio X505-890=i7-740QM-6GB DDR3-64 GB SSD-500 GB SATA-
BR-Rom-DVD Burner-HD 18"Display-GTS360M-1GB-GDDR5
HP 17 Envy 3wks Returned
DIY Desktop Builds -
How to understand the STAD relevant for RFC
Hello performance experts.
I have question about how to understand the STAD relevant for RFC.
I want to know how to calculate the response time of action of "Push save buttion"
which call function module by RFC.
In our system, the screen is created using web dynpro and after push the button,
function module for application will be called.
When I push Save button, 2 STAD line is created.
One is for function code " SAVE" and the other is for "RFC".
Line for "SAVE" include RFC as client, and RFC line has RFC info as server (also client)
I wonder how I should calculate the response time of action"Save" button in following case.
Should I add the 2 response time?
1) 5,867 ms + 5,797 m is collect?
2) 5,867 ms include RFC time, so no need to sum the value and 5,867 ms is collect??
3) 590 ms + 5,797 ms is collect?
4) Or other calculation is correct ?
1) STAD for function code:
CPU time 578 ms
RFC+CPIC time 5,280 ms
Total time in workprocs 594 ms
Response time 5,867 ms
Processing time 590 ms
Load time 1 ms
Wait 5,273 ms
Roll (in+wait) time 5,274 ms
as Client
Number Connections 1
Destinations 1
Users 1
Calls 2
Time Calling 5,280 ms
Remote execution 10,527 ms
Idle 11,110 ms
Data Sent 135,836 Bytes
Received 620 Bytes
2) STAD for RFC
CPU time 1,406 ms
RFC+CPIC time 9 ms
Total time in workprocs 5,080 ms
Response time 5,797 ms
Processing time 2,132 ms
Load time 50 ms
Roll (in+wait) time 718 ms
Database request time 2,882 ms
Enqueue time 16 ms
Roll time
Wait 717 ms
as Client
Number Connections 1
Destinations 1
Users 1
Calls 4
Time Calling 9 ms
Remote execution 1 ms
Idle 0 ms
Data Sent 686 Bytes
Received 1,360 Bytes
as Server
Number Connections 1
Destinations 1
Users 1
Calls 2
Time Calling 5,272 ms
Remote execution 5,269 ms
Idle 11,118 ms
Data Sent 620 Bytes
Received 135,760 Bytes
Thanks for your cooperation in advance.
KeiichiroHi Keiichiro,
I wonder how I should calculate the response time of action"Save" button in following case.
Should I add the 2 response time?
1) 5,867 ms + 5,797 m is collect?
2) 5,867 ms include RFC time, so no need to sum the value and 5,867 ms is collect??
3) 590 ms + 5,797 ms is collect?
4) Or other calculation is correct ?
It depends of what you mean with response time of action "Save" button.
If you mean ALL time, the value is 5.867 because the local time from save was 594ms, the "external" RFC time was 5280ms.
If you want separete analysis, the 594ms is your option since the 5280ms is in other part...
Also, analysing the other part there's another other part which represents a good part of processing time:
Database request time 2,882 ms
Hope this help youl.
Regards, Fernando Da Ró -
[q] how to understand the 'order' of a list?
hi,everyone
there's a test program:
import java.util.*;
public class testList
void test()
LinkedList ll= new LinkedList();
ll.add("3");
ll.add("1");
ll.add("2");
ll.add("5");
ListIterator li = ll.listIterator();
while (li.hasNext())
System.out.println(li.next());
public static void main(String[] args)
testList tl = new testList();
tl.test();
As we know, order is the most important feature of a List.
But this program's result is " 3 1 2 5 " which is not a sorted list!
How we understand the phrase 'order' ?
And , is there any method in Collection which can sort the elements in one collection (list or set)?
thanx a lot!As we know, order is the most important feature of a
List. Yes, and it preserves the order you have used to put elements in the List. :)
But this program's result is " 3 1 2 5 " which is not
a sorted list!Well, what order to you actually like? "1 2 3 5"? Why not "5 3 2 1"? And for more complicated objects "natural" order may be even less obvious. And never forget that List may contain objects that belong to different classes - for example Integer, String and Date - how they are to be ordered? (Of course, such usage is not recommended).
How we understand the phrase 'order' ?
And , is there any method in Collection which can
sort the elements in one collection (list or set)?There are sort-methods in java.util.Collections class. -
How to understand "outbound parameters" and "inbound parameters" in WE20?
Hi,
How to understand "outbound parameters" and "inbound parameters" in transaction code:WE20? Which side is based to set the outbound/inbound parameters?
As I can only set "outbound parameters" for the both partner type:customer and vendor.
so, When do we need to set the parameter "inbound parameter"?
Thanks.Hi,
If you deals with inbound IDoc processing then you need only to maintain partner profile for inbound parameter.
However, if you deal with outbound IDoc processing then you need to setup partner profile for outbound parameter.
In special case, you may need to setup both inbound and outbound parameters for example the sender needs to have confirmation or acknowledgement for completion of inbound IDoc processing.
Please check this links and should help you to learn/start with ALE.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
Also you can check this online document for ALE and IDoc.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful. -
I have a Mikrotik router model RB751U receiving directly from ISP- feeds 3 Cisco Switches of 24 port each then to Patch panels and to users. I am having internet ups and downs in this way: When i bypass my LAN and log into the router to ping 8.8.8.8 i get
clean pings showing there is internet in my router yet myself connected directly to the router all any user on LAN can't browse. Usually the drops happen different times but with an a.v of 5 every day taking less than 2 minutes and the internet comes up again.
What are the possible causes on this problem???Hello,
this forum is related to Network questions belonging with Windows Server problems or from clients to Windows Servers.
In your case it seems that the router/switches are not correct configured.
To check for Windows please post an unedited ipconfig /all from the Windows Server in the LAN, which OS version?
Additional describe your network setup with a small picture as shown here:
Internet > routerWANport> routerLANport> switch > LAN computers
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
How to understand the hierarchy structure of 0PLANT io?
how to understand the hierarchy structure of 0PLANT io ?
i can understand the hierarchy structure of PRODUCT io,
well, i hope someone could explain the hierarchy structure of 0PLANT io
thanks.Hi
You can use following hierarchy tables
RSTHIERNODE - Texts of Non-Postable Hierarchy Nodes
RSEHIERNODE - Master Data: Hierarchy Nodes that Cannot Be Posted To
RSMHIERNODE - Master data: Hierarchy nodes that cannot be posted to
RSHIEDIR - Hierarchy Catalog
RSHIEDIRT - Hierarchy directory texts
RSREQHIER - Data Request hierarchy
RSROLEHIERARCHY - Role hierarchy
In addition to these have a look at K table & I table for 0PLANT.
K table - Hierarchy SID table
I table - Hierarchy structure table
Hope this will help..!!
Thanks,
Vikrant -
How to fix the signal from the microphone to the computer when recording through an interface in logic pro? Every time i record and playback i get poor signal and a lot of fuzz.. how can i fix this problem?
Which model computer?
What operating system? -
Insert a number if the number of digits of that number is greater than its average return true else false.
So what i'd like to know , (and btw sorry about the other questions) how can it ignore the signal ?
e.g: number_aux = 53 -> this will be: Number of digits: 2
Media = (5 +3) / 2 = 4
( 2 < 4 ) then return false. now i'd like to find a way to insert -53 (negative) and the output must be the same (false) ignoring de signal "-"
here is my code:
In this code if u inserted a negative ( -6 or -53) the output is always true because e takes in mind the signal . How do i tell him to ignore it?
System.out.println....
int number _aux =Integer.parseInt(... ....etc
int sum = 0;
int count = 0;
int media;
while (number_aux != 0){
int digit = number_aux % 10;
number_aux /= 10;
sum += digit;
if(number_aux >= 0) count++;
media =(int) (sum / count);
return (count > media);thank you so much.
JoshI already used my brain LOLO , if new the answer i
would not be here ask for help lol.
shiver You forgot to add three or more exclamation marks.
give me a hint , how to ignore the signal without
that method ( using my code)If I'd give you any number, how would you do it? What would there conditions and formula be? Think about that. Programming isn't magic. It's finding a step-wise solution to a problem and writing it down. -
How to extract the signal out from the waveform by my designated power level?
Dear all,
How can I extract the signal from the waveform accroding to the power level? I read the Trigger&Gate.vi, but this vi extract signal according to the duration time. I want to extract signal according to power level.
As shown in the following figures, the signal I want to process is between 130000 to 140000, if I zoom in, I can see the the useful signal is between 135400 to 138200. The question is how to extract the signal in the zone?
I tried the sub_NoiseEst_And_Chop_Shell.vi in the Packet_based_link example too, but this subvi seemed to be a little slow. Can anybody give me better advice? Thanks in advance!
Solved!
Go to Solution.I was working on something similar but haven't had time to fully develop it.
My idea was to use an envelope detector (low pass filter) and then use an energy detection VI on the envelope.
Here's where I left off
Anthony F.
Product Marketing Engineer
National Instruments
Attachments:
test.vi 331 KB -
WRT54G Question on how far does the signal reach?
Question on how far does the signal reach?
Like from the system box at home base, could you take the laptop what distance from it? Miles? Or jus a short distance? And what distance if anyone knows?
Message Edited by White_Devil on 04-09-2008 08:21 PM
[b]Loved Charlton Heston[/b]My 54G is at the far end of my house in my home office, 80+ feet away thru 4 walls I still get 25% signal, enough for a decent connection. Having an all wood construction house helps a bit. Once I was in my car out in the driveway (~90 ft) and it still worked OK.
I've got the bigger hi-gain antennas, not sure that they improve the range that much. I didn't really notice much signal gain going from the short ones to the tall ones. -
How to fix the signal of my iphone 4?
How to fix the signal on my iphone 4?
you have a bad signal ? dropping connections ? go to settings. then general. and reset your network settings. test from there. this will reset any wifi connections you may have setup already btw. you will have to connect to them again and put in the encryption key if needed. if that doesn't work. backup your phone. wipe it to factory. then test the signal then. if all is ok then restore you files back to it and try again. hopfully all that helps.
-
How to understand the strange parameter values shown by 'pstack core'
I encounterred a problem that led to a core dump. I use 'pstack core' to shown the calling stack.
However I could hardly understand some of the parameter values below:
core 'core.150108' of 5016: cmcfun
ff1e1370 __1cLComEndPointFsendv6MpnFiovec_i_i_ (c, ffbfedf8, 2, 2, c, 0) + 4
Why did the 'this' pointer of the instance of class ComEndPoint become 0xc? I don't think it is a valid value of pointer. Does anybody have any idea about this problem?
ff1e5b00 __1cYComTransaction_Icallback6FpnPpdo_transaction_pcii_v_ (6ab90, 0, 0, 0, ffbff1b8, 0) + dc
According to the source code, the 3rd parameter in the function below, which value is 0x66, was not changed in the scope of the function. However it became 0x0 when it was used as the 4th parameter to call the function above. What't the matter?
ff1528e8 pdo_dispatch (6ab90, ad, 66, 0, 0, 0) + dc
I heard that Sun C++ uses 'register windows' to pass the parameters, i0~i5 are used for the first 6 ones. Somebody told me that what I saw in the pstack might not be creditable because the registers might be changed within the function. Is that so? Would anybody plz tell me more details?
Thanks in advance.
Edited by: DirtyBear on Feb 15, 2008 1:17 AMRegister windows are a property of the SPARC computer architecture, not a property of a compiler. SPARC has multiple sets of registers. The function call instruction advances the "register window" to reveal the next set of registers, if there is one. If not, the registers are spilled to the stack to free up a window. The function return instruction moves the window back. (It's a purely hardware feature.) Eight of the registers in adjacent windows overlap, the origin of the "window" term. Registers %o0 thorugh %o7 in the caller become registers %i0 through %i7 in the called function.
On SPARC and x64, some function arguments are passed in registers, depending on how many arguments there are and their types. (The x86 architecture has no registers available for passing arguments.) On entry to a function, the parameters passed in registers might be saved on the stack, but do not necessarily need to be saved on SPARC. The Solaris ABI requires that space for the registers be allocated, but the space is not necessarily used.
In a core dump, the actual registers, particularly for functions other than the current one, are not available. The pstack operation doesn't know how many parameters a function has or what type they are. It shows the contents of the first 6 words on the stack that would hold arguments, if there were arguments, and if they were actually saved on the stack.
In optimized code on any platform, the stack area for a variable or argument is not kept up to date. Computations are kept in registers to the extent possible, and saved in memory only when necessary.
On SPARC in particular, the argument values shown in a stack trace need not be accurate. -
How to understand the way OBIEE implements outer joins?
Hello guys
I have a few scenarios where I have to implement outer joins and inner joins between dimensions and facts..
There are 2 ways as far as I know that allows me to implement outer joins in BMM layer.
1, Join the Logical dim table A to Logical Fact table B using outer join. The modeling will look like the below:
A Dim ---outer------B fact -----------inner----C Dim
By this design, the query that selects columns from all 3 tables will look at this:
select columns from ((B fact inner joins C on key1 = key2) left outer joins on A dim) on key3=key4)..
2, Join logical dim table A to fact table B inside the LTS of fact B by mapping the LTS B to dim A using outer join. then join fact B to C:
B fact (mapped to fact B outer join Dim A) ------------inner -------C dim
By this design, the query that selects columns from all 3 tables will look at this instead:
select columns from C, B left outer join A on key1=key2 where key3=key4
Comparing these 2 queries, the first one seems to do inner joins first and then outer join the result set to Dim A, the second query seems to outer join Dim A first and the result set inner joins to Dim C..
I ran the same report using these 2 different designs, and the data comes out very different. The report of the first query is much smaller than the report of the second query...
Can anyone help me understand how OBIEE understands outer joins? The second query is so far giving the right result, however, I can't get rid of the outer join in the query even if not selecting columns from Dim A, which is impacting the performance of other reports without Dim A.
Your inputs will be greatly appreciated
Thanks
Edited by: user7276913 on Apr 20, 2010 9:31 AM
Edited by: user7276913 on Apr 20, 2010 9:31 AMXcode is the IDE.
Objective-C is the language typically used.
There's lots of getting started stuff at https://developer.apple.com -
How to understand the Error message of the connection of OPC server
hi guys, one issue need your help
when I run the NI OPC servers, one error message will appear in the process information.
Just like as followed:
===========================================================================
2011-6-23 11:50:05 Default User NI OPC Servers Stopping Simulator device driver.
2011-6-23 11:50:05 Default User NI OPC Servers Closing project D:\National Instruments\Shared\NI OPC Servers\projects\simdemo.opf
2011-6-23 11:50:25 Default User NI OPC Servers NI OPC Servers
2011-6-23 11:50:25 Default User NI OPC Servers Unable to load driver DLL 'D:\National Instruments\Shared\NI OPC Servers\drivers\dataforth_isolynx_u.dll'
more messages
=============================================================================
how to understand "2011-6-23 11:50:25 Default User NI OPC Servers Unable to load driver DLL 'D:\National Instruments\Shared\NI OPC Servers\drivers\dataforth_isolynx_u.dll'??????
ThanksHi!
I have the same problem when opening the OPC Server.
Unfortunately I have no solution, but I think it has something to do with incorrect Certificates and is more of a Windows Problem.
If anybody can help, please let us know!
Best Regards
Martin
Maybe you are looking for
-
Accidentally, i deleted the default camera from my ipad and now I can't use the camera of my ipad. How can I get that back?
-
I need to compute the rpm of an engine using information from an optical encoder attached to it. the engine is running in transient mode so the encoder pulse doesnt have a constant frequency. I need to get the period betwwen two rising or falling edg
-
Hi, Do we need to maintain charactertic value in CTO4 under values tab...or its to be maintained when we add something new like new plant, new doc type etc? We give values only when we define release strategies....correct me if i am wrong. In case w
-
IPad reboots when scrolling the saved photos
I have the same issue as other users when u get close to the bottom of the saved pics eg screen dumps from safari etc it reboots iPad every time not good enough apple fix this issue asap. Works fine with other folders with 1000's of saved pics just n
-
Camera quick button doesnt appear on the lock screen but did when I first upgraded the new OS
I upgraded to the new OS5 today and the camera quick button appeared on the lock screen when the upgrade was complete but has since disappeared. I have resynced the phone and still nothing. anyone else have the same problem? I have the iphone 3GS. Th