How to unzip using flex

How to unzip a zip archve

Hi, strange I didn't find any answer in the forum, so I paste my code :
You should first read the zip file and put its content into i_zip_file_xstring variable of type xstring
DATA lo_zip TYPE REF TO cl_abap_zip.
DATA lt_zip_file TYPE cl_abap_zip=>t_files.
DATA ls_zip_file TYPE LINE OF cl_abap_zip=>t_files.
DATA l_xstring TYPE xstring.
CREATE OBJECT lo_zip.
CALL METHOD lo_zip->load
    EXPORTING
      zip             = i_zip_file_xstring
    EXCEPTIONS
      zip_parse_error = 1
      OTHERS          = 2.
LOOP AT lo_zip->files INTO ls_zip_file.
    WRITE : / ls_zip_file-name, ls_zip_file-date, ls_zip_file-time, ls_zip_file-size.
* unzip file, put its unzipped content into L_XSTRING
    CALL METHOD lo_zip->get
      EXPORTING
        name                    = ls_zip_file-name
      IMPORTING
        content                 = l_xstring
      EXCEPTIONS
        zip_index_error         = 1
        zip_decompression_error = 2
        OTHERS                  = 3.
*>>>>>>>>>>>>>>
* PUT YOUR CODE HERE TO PROCESS the L_XSTRING variable which contains each unzipped file
*<<<<<<<<<<<<<<
ENDLOOP.

Similar Messages

How can I use flex motion control VI without hardware?

I would like to try and simulate the motion control of my system before i hook up the motion control card. But when I use the VI in flex motion contro took kit it asks for address or something and gives me an error. Can't I just simulate without hardware?

Hello,
The only way you can use FlexMotion without any hardware is to set it up as Open Loop Stepper Control. Otherwise, you will get errors when no encoder signal is fed back to the controller.
Please let me know if you have any further questions.
Regards,
Andy Bell
Application Engineer
National Instruments

How to use $FLEX$ to pass FROM and TO param to another FROM and TO param

Hello All,
I have 2 parameters from customer and to customer, both these have same LOV,
I have to add 2 more parameters from location and to location
If i use $FLEX$.customer_LOV to pass to the from location LOV how can i use $FLEX$ to pass the TO customer LOV to TO Location LOV.
As per my knowledge $FLEX$ can be passed from top to bottom in the list of parameters.
Is there any other way to restrict.
Regards,
Sandeep V

Hi,<br /> I am trying to configure BlazeDS with JBOSS Application Server.<br /> I have downloaded BlazeDS binary version - blazeds_bin_3-0-0-544.zip from Adobe. But in the installation steps, it says that copy blazeds.war, samples.war and console.war into <JBOSS_HOME>/server/default/deploy folder. But in this zip, it contains only blazeds.war file only. I have copied it to <JBOSS_HOME>/server/default/deploy folder.<br /><br />I have restarted JBoss. I didn't get any error. But when i give <br /> http://localhost:8080/blazeds ... i am always getting "Page not found 404" error.<br /><br />Please help me, if you have detailed steps to configure BlazeDS on JBoss.<br /><br />Thanks for your time.

How do I use a Flex swc in Flash CS3?

My engineering team has used Flex to create a nice little swc
for me to use inside of Flash CS3, but now I'm having trouble
finding any documentation on how to actually import it. Placing it
in the Components folder doesn't work, as it's not recognized by
the Components window (either as an AS2 or AS3 swc). Is it even
possible to use swcs from Flex in Flash? Thank you very much for
the help.
-- Jeremy

Use these links
Modular Applications
http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf69084-7f22.html
Creating Flex Libraries
http://help.adobe.com/en_US/Flex/4.0/UsingFlashBuilder/WS6f97d7caa66ef6eb1e63e3d11b6c4d0d2 1-7fe6.html
-Pramod
http://www.flexmycode.com

How to use Flex tag library in jsp

Hi All,
We are planning to use flex in our J2EE application in order
to show some charts. Our j2ee application is in JSP,Struts. I have
searched on google about this and found that I can include flex 3
tab library in the jsp in order to use mxml tag in the jsp. I have
written a sample program in the jsp which uses flex.
<%@ taglib uri="FlexTagLib" prefix="mm" %>
<SCRIPT LANGUAGE="JavaScript">
function showMessage() {
message.value = "Use this application wisely";
function hideMessage() {
message.value = "";
</SCRIPT>
<mm:mxml border="5" onmouseover="showMessage();"
onmouseout="hideMessage();">
</mm:mxml>
<TABLE>
<TR>
<TD><input type="text" name="message"
size="50"></TD>
</TR>
</TABLE>
I have added entry inweb.xml. See below,
<taglib>
<taglib-uri>FlexTagLib</taglib-uri>
<taglib-location>/WEB-INF/tlds/flex-bootstrap.jar</taglib-location>
</taglib>
Following are the problems that I am currently facing.
1) Could anybody let me know whether the entry of
<taglib> tag is correct in the web.xml. Is it the correct
jar(flex-bootstrap.jar) that I should include?
2) If yes, from where to download it? or
If no, what is correct jar that i should include and how?
your response will be highly appriciated as this is the major
requirement in our project?
Thanks ,
Chandan

Hi,
Pleas find details at the URL below.
http://labs.adobe.com/wiki/index.php/Flex_2_Tag_Library_for_JSP
Hope this helps.

How to open pdf files in browser using flex

hi,
my project is having a Document explorer wchich contains pdf
files,iwant to open it in the browser.can any one tell me how to
open pdf documents using flex programming(i tried with different
thing like swf's but my client wants only pdf formatt).

Another option is by calling a JSP page. This example will
open a pdf file into a new browser without displaying the download
"save" prompt.
Function to call the JSP:
private function downloadFlyer(event:Event):void {
var jspLink:URLRequest = new
URLRequest("jsp/downloadpdf.jsp?fileName=Fundraiser_flyer_2008.pdf");
navigateToURL( jspLink, "_blank" );
JSP code:
<%@ page errorPage="error.jsp" %>
<%@ page import="java.io.*" %>
<%
//Get the parameters
String downloadFileName=request.getParameter("fileName");
String fileName = application.getRealPath("/downloads/" +
downloadFileName);
File file = new File(fileName);
if (!file.exists()) {
throw new IOException("File does not exist.");
// Get the size of the file
long length = file.length();
// You cannot create an array using a long type.
// It needs to be an int type.
// Before converting to an int type, check
// to ensure that file is not larger than Integer.MAX_VALUE.
if (length > Integer.MAX_VALUE) {
throw new IOException("File too big.");
response.reset();
response.resetBuffer();
response.setContentType( "application/pdf" );
response.setHeader ("Content-Disposition", "filename=" +
downloadFileName);
//Prevent the Java error: "getOutputStream() has already
been called for this response"
out.clear();
out = pageContext.pushBody();
InputStream in = new FileInputStream(file);
OutputStream output = response.getOutputStream();
try {
int curByte=-1;
while( (curByte=in.read()) !=-1){
output.write(curByte);
} catch (IOException ioe) {
ioe.printStackTrace(System.out);
} finally{
output.flush();
in.close();
response.flushBuffer();
%>

How do I save a file to a server using flex and coldfusion?

How do I save a file to a server using flex and coldfusion?
On the CF side I might need to use this:
<cffile action="UPLOAD" filefield="Filedata"
destination="#expandpath('..\somepath)#"
nameconflict="overwrite">
And on the flex side I might need to use something like this:
var sendVars:URLVariables = new URLVariables();
sendVars.action = "upload";
var request:URLRequest = new URLRequest();
request.data = sendVars;
request.url = _strUploadScript;
request.method = URLRequestMethod.POST;
_refUploadFile = new FileReference();
_refUploadFile = _arrUploadFiles[_numCurrentUpload].data;
_refUploadFile.addEventListener(ProgressEvent.PROGRESS,
onUploadProgress);
_refUploadFile.addEventListener(Event.COMPLETE,
onUploadComplete);
_refUploadFile.addEventListener(IOErrorEvent.IO_ERROR,
onUploadIoError);
_refUploadFile.addEventListener(SecurityErrorEvent.SECURITY_ERROR,
onUploadSecurityError);
_refUploadFile.upload(request, "file", false);
I just don't know how to put it all together in Coldfusion.

try this...
http://cf-creations.co.uk/blog/index.cfm/2008/9/20/Flex--File-Upload-Form--Part-One--Build ing-The-Initial-Form

How do I estimate time takes to Zip/Unzip using java.util.zip ?

If I am compressing files or uncompressing zips using java.util.zip is there a way for me to tell the user how long it should take or for perhaps displaying a progress monitor ?

For unzip use the ZipInputStream and pass it a CountingInputStream that keeps track ofr the number of bytes read from it (you write this). This CountingInputStream extends fileInputStream and as such can provide you with information about the total number of bytes available to be read and the number already read. This can give a crude idea of how much work has been done and how much work still needs to be done. It is inaccurate but should be good enoough for a progress bar
As for zipping use the ZipOutputStream and pass it blocks of information. Keep track of the number of blocks you have written and the number you still need to write.
matfud

How can i use C/Javascript/php/Java in flex?

can i embed these language into my flex project?
since i have to check harddisk space, free memory remain. Also, i need to check the pixel of photos before the photos becoming bitmapdata
please help~

saipanBETTY0509 wrote:
Subject: How can i use C/Javascript/php/Java in flex?
can i embed these language into my flex project?
You can't. Why do you want to do this?
saipanBETTY0509 wrote:
since i have to check harddisk space, free memory remain. Also, i need to check the pixel of photos before the photos becoming bitmapdata
I think what this means is "I want to check to see how much hard disk space is available. Also, I need to check the pixel dimensions of an image."
Is that right?
There is no way in the Flash Player (as far as I know) that you can determine the amount of free disk space. However, in AIR you can use air.File.applicationStorageDirectory.spaceAvailable to determine the storage space available in the application storage directory.
As far as determining the dimensions of an image, there are plenty of good resources out there on that. Maybe this one will be helpful to you?
http://www.yswfblog.com/blog/2008/12/22/flash-10-experiments-the-warholizer-loading-and-pr ocessing-local-images/
-Josh

How to add interface to customlize MXML Component when use Flex Builder 3?

How to add interface to customlize MXML Component when use
Flex Builder 3?

David,
I don't believe you can add the interface via the creation
dialog in FlexBuilder 3. You can always manually add the
"implements" property to your MXML Component root tag. Something
like this: <mx:VBox implements="com.mycorp.IMyInterface">
If you want autogeneration of the interface, then create an
ActionScript class with that interface and then copy the generated
functions and setter/getters into the script block of your MXML
component.

How to call proxy service at enterprise service bus using flex

Hi
I have a proxy service located at wso2 enterprise service bus. How can i call that proxy service using flex?
Regards
Minal

Hi Minal, I think you can communicate with wso2 using mx:HTTPService or mx:WebService, you just need to find out which services you'll be consuming and then create the flex app to present and interact with those services.

How to use Flex mx.charts component in flash project?

Can anyone enlighten me on how I can use the Flex mx.charts component in my Flash Project? I am using Flash Professional CS4
Are there any tutourials on the subject.
Thanks in advance.

http://www.designscripting.com/2011/03/filtering-flex-chart-data-by-consuming-xml-data/
http://www.roseindia.net/tutorial/flex/flex4/components/chartactionscript.html
Or otherwise you can use the below link to use the fusioncharts components
http://www.fusioncharts.com/

How to use $FLEX$ for DFF segment

We have below requirement for “Add'l Salary Admin. Details” DFF.
we have three segments:
Current Additional Amount -first segment
Additional Allowance Change % - second segment
New Additional Allowance - third segment
e.g.
Now first segment has fixed value, Assume it is 2000 AED
And in second segment if value is 3
Then third segment should show the value: 2000 + 2000 * 3/100
Third segment is dependent on segment1 and segment2.
I think, we can achieve this by using $FLEX$
But I need your guide line, how can we do that?

below solution is only possible solution.
Hi,
Keeping the default SQL statement on its place, use table based value set for segment3 which contains all values from 0 to let say 1,000,000 (such that your calculated values falls in the range).
Try it. It segment3 will now calculate on the basis of values of segment1 & 2.
Regards
Ayaz
Thanks for everyone's input.

How to use Flex Builders Auto Generated CFCs

OK. Not only have I already gone to a 4 day flex training,
have an advanced coldfusion certification and work with 3 coworkers
who have done the same...none of us can figure out how in the heck
the flex builder's autogenerated cfc's are to be used. No big deal
on the fact that this might be something we simply are encountering
for the first time, but the complete and utter absence of a single
piece of example code or documentation stating how to use this code
correctly is very very very very irritating.
Can anybody, share with me anything about how these CFCs are
to be used correctly. For example. We are using the wizard to
generate an "Active Record CFC" set of cfc's for an example table
contain four fields. We have a data grid that is now populated by
the "getAllAsQuery" function....we would like to implement the
feature of making this dataGrid updateable. We know how to pass
data back and forth and yes we could write our own CFC to do
this...but having it autogenerated is a really neat option...but
the question remains....how does one use them!!!
Any help would be much appreciated. Thanks in advance!

Hi there, what's your name by the way?
What is a VO or DTO, and why would you use it?
This was copy from the Java world, so it's a very OOP principle, basically in the OOP world everything is a class that has methods and properties, and you represent everything with classes, a VO is just that a class that represents an entity in your app. You use it for a few reasons in my opinion:
It allows you to pass strongly typed data between different layers in your app.
It's more verbose, it's a good OOP practice, and also makes debugging and reading you code easier.
It allows easy data type conversion between CF and Flex.
You obviously know how to use the wizards, after you select your table and open the wizard you'll see three different CFC types, if you're using LCDS then select that type if you don't I'll recommend you to go with BEAN/DAO. In Flex Builder you can create a folder link to a system folder, so if you create a folder named MyCFCs and you set this virtual folder to be hold inside c:\ColdFusion8\wwwroot every file that you put in this folder will be place in c:\ColdFusion8\wwwroot so you don't have to manually copy those files.
In this wizard you'll see CFC folder in there you can select your virtual folder, you'll see below the CFC package name this is extremely important to be set right, what is the CFC package name? Basically it's the same folder structure where your CFCs will be located for instance let's say you're gonna place the files in this folder structure c:\ColdFusion8\wwwroot\com\myPersonalDomain\ so your CFC package name will be com.myPersonalDomain.
You'll probably also would like to enable the option: Create an ActionScript value object in addition to CFCs, the folder where you place this file have to mimic the CFCs folder structure so for an instance you'll have to save inside your src folder, inside a folder com, an finally inside a folder myPersonalDomain . src/com/myPersonalDomain, and the AS Package name should be the same as the CFC.
Once you're done and click finish, you'll see for files created, one of the the AS VO , and three CFCs.
yourDataTable.CFC
This is a CFC that creates the VO or DTO in CFC, it has the same properties definition that the AS version has, also the setters and getter for every property.
yourDataTableDAO.CFC
This CFC contains all the code that handles the database access it a could be an insert, update delete or just a read query.
yourDataTableGateway.CFC
This is a bridge between your Flex app and your CFCs, it contains a set of methods commonly use when you access a DB, this CFC invocates the methods in the yourDataTableDAO.cfc and returns an object or an array of objects of yourDataTable.CFC type to Flex.
In Flex what do you have to do in order to use VOs?
Add a reference to yourDataTable.as class
Create a remote object.
Create the event handler(s)
Make a call to the remote object.
<mx:Script>
     <![CDATA[
               import com.myPersonalDomain;
               import mx.controls.Alert;
             import mx.rpc.events.ResultEvent;
              private var myDummyVar:myDataTable;
          private function myEventHandler(e:ResultEvent):void{
               //do Something
               trace(event.result.toString());
     ]]>
</mx:Script>
<mx:RemoteObject id="myRO" destination="ColdFusion"
source="com.myPersonalDomain.myDataTableGateway">
     <mx:method name="getAll" result="myResultHandler(event)"
fault="Alert.show(event.fault.toString())" >
</mx:RemoteObject>
<mx:Button label="Call CF" click="myRO.getAll()" />
Well I hope this would help you, I'm kinda tired this has been by far the largest post I've written.

How to compile your flex application for Iphone Using Adobe Flash CS5?

How to compile your flex application for Iphone Using Adobe Flash CS5?

I'm so sorry, I'm not really familiar with the codes.

How to unzip using flex

Similar Messages

Maybe you are looking for