How to Update Activity & SubActivity (User Defined Form)

Dear All Experts,
I have a difficult condition with me. I am working on a project which end on 8th Level. Now condition is all 8 levels are connected in some manner. Suppose if I change quantity on 8th level then this quantity should update to 7th level. After updating at 7th Level, the other levels get disturbed. So they also should be updated.
So it can be explained as follows:
1. I change quantity at 8th level for an item.
2. That item is in the row on 7th level. It should be updated by the quantity in step1.
3. Now sum of quantity on the 7th level should be updated to 6th level at row.
4. It should be so on upto level1.
I am just asking about like it happens in Microsoft project. Plz suggest me how can I do that ?
Reagrds

Dear All,
Plz reply to this.
Regards

Similar Messages

  • Custom Quiz: How to update and report user-defined variable?

    Hello,
    I am a novice Captivate 5.5 user.  Thanks to Lilibiri's blog and articles, I have managed to built a custom quiz (all with user-defined variables and advanced actions). 
    The quiz is composed of 2 questions with 4 possible answers each.  Each of the 4 answers have a different score attached to it (i.e. answer a = 4 points; answer b = 3 points; answer c = 2 points; answer d = 1 point).  I have inlcuded a "Feedback Slide" that may appear after each question.  For example, if a person chooses score d, they will get sent to a Feedback slide that basically says they are wrong.  There is a "back" button on the "Feedback" slide that can take them back to the the prior question sllide and they can change and re-submit their answer.  After they have answered both question slides, they continue to a "Results" slide.  Upon entry to the "Results" slide, using "advanced actions" my user-defined variable adds up all of the scores to get a total.  Based on this total, one of three possible text captions boxes appear, depending on their total.  And....here are my questions (I have checked and re-checked the Forum and blogs for answers - and I am so sorry if I missed them!!) 
    1) I have defined a variable that totals the points that the person received on the quiz.  I would like this variable displayed on the Results slide.  It can get it to  appear in a Text Caption Box.  BUT if a person changes a score and re-submits the score before entering the "Results" slide, the total score reflects EVERY score that the person has chosen (the scores that they originally chose and then changed are still included in the total).
    2) I want the total score a person gets on the quiz reported to the instructor.  I don't know if a user-defined variable can be reported and how to go about doing this.  We will be running our quizzes on an LMS (though we haven't chosen one yet).  I tried using a system variable (cpQuizInfoPointsscored), but I believe (after reading discussions on Forum), it will not work in my quiz if my scores are adjusted/changed.
    3) another question - would you like me to put this in a separate discussion?   I certainly can!!  There is a "Back" button on the "Results" page.  I have tried using "advanced actions" and "on success: move to last slide visited" but neither option will allow the user to move to the last slide visited.  Ideally, I would liek a person to be able to go back through the quiz, look at their answers and adjust them.
    Thanks in advance for your help!  I have learned SO much in the last few weeks from all of you!

    Hello and welcome to the forum,
    That is a lot of questions, thanks for reading my blog. The most difficult part is indeed the reporting in case, you did see perhaps that I have not yet published the blog post about reporting questions with partial scores, third part of my reporting sequence. Have two possibilities that I'm exploring: either with Javascript, or with the brandnew Master Widget that Rod is pointing to. Watch out for the blog post(s), but need some more time. So no real answer to your second question for the moment, because you cannot control the quizzing system variables with advanced actions.
    About your first question: you will have to so sort of 'reset' when re-entering the question slide, so that the total score stored in the user variable is decremented with the score attributed to the user in his previous answer. This means that you have to store this previous score in another user variable. Hope this make sense?
    I do not get the last question totally. Are you using the default Score slide? You have to allow Backwards movement in the Quiz Preferences, but for default Question slides this will not allow the user to change his answer. I thought you were using custom question slides? Do not use the default score slide in that case, but create your own score slide, so that you can add buttons and actions to your wish. Perhaps I misunderstand your question, and it would be better to explain more, eventually in another thread if it is about the default score slide, question slides.
    Lilybiri

  • Give authorisation To User defined form

    How to give authorisation to User defined form
    Regards,
    Pravin

    hi,
    After you have created the additional Authorization in Additional Authorization Creator window you still need to define the authorization in the Authorization Window located at Administration -->> System Initialization -->> Authorizations -->> General Authorizations. then select your desired user and assign your desired Authorization.
    regards,
    Fidel

  • User Defined Form problem...

    Hi,
    I have the Item Master Data form opened with the User Defined Form opened.
    Now the Form has the focus and I'm trying to get an User Defined Item control on the User Defined Form
    but it says Form not found and I did try to select it or to use the GetForm with the "-" + TypeEx of the current form but nothing seems to work.
    Any idea how I can switch from the form to the User Defined Form on which I need to get the control ?
    I havfe to mention that I'm trying it on a second opened Item Master Data form so the FormTypeCount = 2  Could it be a BUG ?
    Edited by: Marc Roussel on May 28, 2009 4:20 PM

    if (mo.ItemUID.IndexOf("U_") != -1)
        oCurrentForm.PaneLevel = 1; // I tought this could help since the UDF form has a pane level of 1 but it does nothing.
        oCurrentForm = _SBOApplication.Forms.GetForm("-" + FormType.ToString(), FormTypeCount);
        // I get a Form not found here............ HUH WHY ??????? It's there and visible.  I DON'T UNDERSTAND...
        // and FormType is really "150" which is the actual form opened......

  • Type property for user defined forms

    Hi,
    When creating a user defined form using Screen Painter,
    how can we assign Type property for the form so that we are sure it will not clash with system forms in the future?
    Thanks,
    Satish.

    Thanks Juli
    Just one last question. It it be alright to assign a text value(Partner namespace in front) for the form type property.Does it have any drawbacks?
    Thanks,
    Satish

  • SQL Query for user defined form

    Hi experts,
    I want query to update some fields in my user defined form using stored procedure on clicking of ADD button.
    Explanation:
    I have User Defined form call "DC request" with Object 'DCLM'..On click of Add button, it is saving my record info into the form. But in one field if value in not entered then it is saving as 'Null'.
    Addon is already made, can not change in coding.
    I want to update this field with '0' value through query in stored procedure on click of Add Button. Can anyone help me out to achieve this.
    Thanks

    Hi Team Bone.
    Please try below Transaction Notification which will Restrict User to ADD if Field_Name is NULL and then User Need to Enter ZERO i.e. 0 for Adding.
    IF @OBJECT_TYPE = 'DCLM' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
    BEGIN
    If Exists (Select T0.DocEntry from [Table_Name] T0 Where ( T0.Field_Name is null  OR  T0.Field_Name = ' ' ) AND T0.DocEntry  = @lisT_of_cols_val_Tab_del )
    begin
    SET @error = -100000
    SET @error_message = 'Filed_Name is NULL then So, Please enter ZERO Value i.e. 0 in Filed_Name'
    End
    End
    Please change Table_Name and Field_Name with with UDO field.
    Hope this help
    Regards::::
    Atul Chakraborty

  • Include the COPY TO Option in User Define form

    Hi Experts
    How can we include the COPY TO Option in User Define form
    Thanks In Advance
    A S VAMSI KRISHNA

    Hi,
    In SAP B1 i think there is no default functionality  for copy to in user defined form. As Parminder said you can use the control button combo and write your own method for populating  data.
    Regards
    Arun

  • Opening a Crystal Report in B1 8.8 in a User Defined Form representing UDO

    Hi Experts,
    Is it possible to open a Crystal Report from a User Defined Form representing my UDO?
    I had developed a 'Vendor Quotation' UDO and its  User Defined Form
    I wanted to show the report while clicking the Preview menu in SAP B1 8.8 toolbar.
    I have created the Crystal report and used the record selection as {@OVQT.DocEntry} = {DocKey@}
    Please help
    Also, is it possible to add Print layout and assign a default Print layout to this User Defined Form?
    Thanks in advance
    Regards
    Arun

    Hi,
    I also face the same problem. I make a master type using UDO. But i want to print it.
    In my opinion ( i haven't tried this way ). If we make a UDO ( master or document type ) , we will find the docentry and object field in our UDT. Both of these will connect between SAP form and Crystal report. In crystal report we select the tmsp_doclinetypelayout. It is a store procedure which will connect between SAP form and CR. Before that try to modify this SP by adding the udo object.
    Fyi, if i'm not mistake dockey is connected to docentry SAP form.
    Thanks
    regards
    bodhi86

  • How to use negation in user defined rules?

    Hi,
    Can you please show me an example to use negation in user defined rule? I created a rule like below (the rule says if a patient has a fever problem and not have penicillin hypersensitivity, then recommend medication1):
    INSERT INTO mdsys.semr_myMedicineRB VALUES('rule1',
    '(?p rdf:type :Patient) (?p :present ?c1) (?c1 rdf:type :Fever) (?c2 rdf:type :Penicillin_Hypersensitivity)',
    '(NOT_EXISTS(p :present c2))',
    '(?p :recommendation :medication1)',
    SEM_ALIASES(SEM_ALIAS('','http://www.example/medicine#')));
    The rule successfully inserted into the rulebase. However, I cannot pass the entailment creation phase and got the errors:
    ORA-29532: Java call terminated by uncaught Java exception: java.sql.SQLException: Missing IN or OUT parameter at index:: 1
    ORA-06512: at "MDSYS.SDO_SEM_INF_INTERNAL", line 16453
    ORA-06512: at "MDSYS.SDO_SEM_INFERENCE", line 302
    ORA-06512: at "MDSYS.SDO_SEM_INFERENCE", line 352
    ORA-06512: at "MDSYS.RDF_APIS", line 118
    ORA-06512: at line 2
    29532. 00000 -  "Java call terminated by uncaught Java exception: %s"
    *Cause:    A Java exception or error was signaled and could not be
               resolved by the Java code.
    *Action:   Modify Java code, if this behavior is not intended.
    According to the post built-in primitives(noValue,remove) for user defined rules, it seems negation is not supported in user defined rules. Can you please advice how to implement negation in user defined rules?  Thanks a lot in advance.
    Hong

    Hi Hong,
    Let's look at this similar but simplified problem:
      if (?p  rdf:type  :Patient) and (NOT_EXISTS(?p  :present  :c2)) ==> (?p :recommendation :medication1)
    You can use something like this in the user defined inferencing:
    -- First get the numeric IDs for the relevant URIs
    recomID := sdo_sem_inference.oracle_orardf_add_res('http://..../recommendation');
    medID := sdo_sem_inference.oracle_orardf_add_res('http://..../medication1')
    rdfTypeID := sdo_sem_inference.oracle_orardf_res2vid('... full URI for rdf:type');
    patientID := ...
    presentID := ...
    c2ID := ...
    -- Now this query will find out ?p that satisfy (?p  rdf:type  :Patient) but not
    -- (?p  :present  :c2)
    sqlStmt := '
      select ids1.sid  sub
         from ' || src_tab_view || ' ids1
        where ids1.pid= ' || to_char(rdfTypeID,'TM9') || '
          and not exists (
             select 1
               from ' || src_tab_view || '
              where sid = ids1.sid
                and pid = ' || to_char(presentID, 'TM9') || '
                and oid = '|| to_char(c2ID,'TM9') || '
    insertStmt := '
      insert /*+ parallel append */
       into ' || output_tab || '(sid, pid, oid)
      select sub, '||to_char(recomID,'TM9') || ',' || to_char(medID,'TM9') || '
       from (' || sqlStmt || ')'
    More details can be found in
    http://docs.oracle.com/cd/E16655_01/appdev.121/e17895/inference_extension.htm#CHDDBGEC
    Hope it helps,
    Zhe Wu

  • How can you change a user defined swatch

    How can you change a user defined swatch

    Double click on the swatch in the swatches palette.
    In most case you can do that , unless for example you have a placed image that has that color in a spot channel.

  • Regarding query generation to user defined forms

    Hi all,
    i had created user defined form with some fields and tables
    tables in the sense matrix
    i had entered the data in that table
    and added that data
    after that i came back to that form and used the fields that are below the table to calucalate the maximum and minimum from the columns of matrix
    so to get the data of that particular form only i used the $ command to extract data depending on the report number
    but iam unable to get the result
    any one help me regarding this
    it is required urgent
    Thanks And Regards
    sravanth.sm

    Sravanth,
    Let's see if I can help you.
    Assume your form's title table is called @TITLE and the matrix table is called @ROWS. In the form's title you have the record key DocEntry. In the Matrix you have a column COLUMN from were you are going to get some value. ok?
    Maximum of the column
    SELECT Max(T0.COLUMN) FROM [dbo].[@ROWS] T0 WHERE T0.DocEntry=$[@TITLE.DocEntry]
    To get the minimum, just use the Min() function.
    Regards,
    Vítor Vieira

  • Base Document and Target Document Menu for User Defined Forms

    Hi Experts,
    I am facing a problem regarding enabling the menu "Base Document" Menu UID="5898" and "Target Document" Menu UID="5899" . Both of these menu Items are not enabled for User Defined Form .Actually I have developed a user Defined form for Purchase Requisition that targets Purchase Order . User can Copy Line Items From Purchase Requisition to Purchase Order and I am tracking the DocEntry and LineId of PR into PO Item's using UDS . I want to Open this PR Document upon Click of BaseDocument Menu .I have tried all the options. I have used Form.enableMenu() method also . But none of those options work for this menu . I ahve also searched about this problem i this forum also but there is no soultion so far posted regarding this.
    I really want to confirm whether it is possible or not using SDK for User Defined Forms . Is there any possiblity of implementing any WorkArounds and Having this feature implemented .
    I am Expecting a true solutions as this Forum has so many Experienced Experts .
    Thanks and Regards,
    Pooja Singh.

    Hello Poja,
    It is not possible, because the requested menus are depending on the forms, and the are not exists,
    WorkAround:
    add the menus to the User Defined forms, and use right click to activate them:
    oForm.Menu.Add("5898", "Base Document", BoMenuType.mt_STRING, oForm.Menu.Count)
    oForm.EnableMenu("5898", True)
    And hanle the menu event when you clicked them and the form is your custom form.
    Regards,
    János

  • How do you create a user defined functions  UDF and passing a value like a ID to GEt a Value.

    How do you create a user defined functions UDF and passing a
    value like a ID to GEt a Value.
    using a query.
    are there example.
    Thanks

    tons of examples at cflib.org - good place to start, even
    though many
    udfs there are a bit outdated in their code...
    Azadi Saryev
    Sabai-dee.com
    http://www.sabai-dee.com

  • Problem When Try to add Master data record for User define form

    Hi,
    I have made one user define form. And assign UDO and fields proerly in form.
    But when I try to add the record from the form it will give me error
    Invalid Code [Operation Master  -Code] [Message 173-36]
    I have already bind the code field of the table to one field in the screen painter.
    Please give me the reply.
    Regards,
    Gunjan Shukla.

    Dear Shukla
    Can you please try to do the binding in the code (after loading the from).
    Doing that, do you still have the problem?
    Best regards,
    Miki

  • Document Numbering Issue in user defined form

    Dear All,
    There is UDO with manageseries = true. Series and DocNum fileds are binded to database (Combobox And Edittext). I can easly get next number and assign to Docnum field while selecting series from Combobox. The problem is when i choose series diferent than default and add document i get warning message "The actual posted document number is :XXXXXXX". No matter which series i choose system always takes default one. I found other threads accourding to this issue but no solution found.
    Regards,
    Guru

    Hello,
    How guru. Is your problem solved? As i'm have a similar peroblem -
    I have created a user form using screen painter and want to save data to my user defined table -
    Document - U_OPCD
    Document Rows - U_OPCD1
    First i was using the SAPbobsCOM.UserTable object to save data to my usertable. But after registering it as a UDO (as i wanted document numbering series for it) i'm unable to save data using this SAPbobsCOM.UserTable object. As i'm uable to access the default fields (DocNum, DocDate, Series....)  added to the table by SAP.
    Can u help please?

Maybe you are looking for