How to update infotype 0712 in the background

I amd working on a web dynpro applicaiton for PA action request and process action in the background. We have manu concurrent employees. When the main assignemnt is terminated, I need to switch the main pernr to another pernr. I sue HR_INFOTYPE_OPERATION to update other infotypes with no problem, but it does not work with info type 0712. I step through in debugger, see HR_INFOTYPE_OPERATION run though without erro, but IT0712 does not show the update.
What other tool can I used to update infotype 0712 and 0171?
Anna

Hi Anna,
              Have you tested the IT0712 by manually updating?
if so try with bdc recording and run in foreground mode.
if the same hits in IT0712 or 0171.
use the same with no screen mode.
don't use the HR_infotype_operation FM
it will help you.
cheers...,
By,
Vijay.

Similar Messages

  • Updating Infotype 0077 for the New Race and Ethnicity Codes

    Hi,
    I would like to ask for a help or any ideas on below case:
    There are new race and ethnicity codes required by the US EEO Law. I've already maintained them in table T505R. My problem now is on how infotype 0077 records of the employees will be updated showing the new race and ethnicity codes. Program RPURACU0 is use to update the records in infotype 0077. In this program, I first map the old ethnic origin to the new race and ethnicity codes. But after I've run and execute the program, infotype 0077 records of the employees still shows the old ethnic origin codes. It does not show the new race and ethnicity codes which should be based on the mapping I've done.
    Another problem is that in infotype 0077 in the field "Ethnic Origin", upon clicking on the drop down list, it shows all of the entries I've entered in table T505R. I think that ethnicity and race categories should be two different fields and thus, there should be another field for the race categories. May I know on how to add such field?
    To summarized, I need help in the following:
    -how to update infotype 0077 showing the new race and ethnicity codes
    - how to create field "Race" in infotype 0077 to display the new race categories
    Thanks in advance for your help!

    Mary,
    We have applied the relevant note, updated MP007700 (as below) and executed program RPURACU0 with the required mapping.  However, the Race field check boxes are not visible on IT0077 because as you can see the relevant field is not listed below.
    Module Pool          MP007700            Variable key    10
    Standard screen      2000                Feature
    Alternative screen   2010
    Next screen          2010
    001     P0077-RACKY     Ethnic origin
    002     P0077-MILSA     Military status
    003     P0077-ETHEN     Ethnicity
    004     P0077-SURVY     Survey answered
    005     P0077-DISAB     Disability
    006     FRAME_2     Veteran Status
    007     P0077-MEDIC     Benefit Indicator for Medicare
    008     P0077-DISDT     Date of Determination of Disabil
    009     P0077-DISLE     Date Employer Learned of Disabil
    011     P0077-EEOEX     EEO Exempt Indicator
    012     Q0077-VETS2     Veteran status
    013     Q0077-VETS3     Veteran status
    014     Q0077-VETS4     Veteran status
    015     Q0077-VETS5     Veteran status
    016     Q0077-VETS6     Veteran status
    017     Q0077-VETS7     Veteran status
    018     IT_ITAB-MARK                                    
    019     Q0077-VETS1     Veteran status
    021     FRAME_1     Additional Personal Data
    023     FRAME_3     Disability
    Thanks!
    Edited by: Victoria Nate on Sep 23, 2008 6:35 PM

  • How is it possible to adjust the background images and the text in Mail?

    How is it possible to adjust the background images and the text in Mail?

    Here's the solution I used to solve the same problem. If you're not comfortable editing the source files, this might be more than you want to take on--but I've done it to several files with no ill effects. You can follow the instructions on this page and the referenced original post from (he includes a link on the page). Good luck! He's got some great tips on some of his other pages.
    http://photo.rwboyer.com/2010/03/15/aperture-3-book-theme-trick/
    A warning about editing the Master pages--it only edits them in that book--it doesn't update the theme. So if you go to create another book with those same layouts, you'll have to duplicate the book and replace all the images. An alternative would be to create a "clean" book with no photos in it and then just use that as a starting point each time.

  • How to update table styles in the new Pages?

    Anyone found out how to update table styles in the new Pages? I see it's done in some of the templates that Apple provided, but I can't find it. Also, the Copy table style command is gone, so I can't make my tables look in a uniform way, unless I use one of the built-in styles.
    Thanks.

    I'm having the same trouble. Looks like no way to create an overal 'table' style and I cannot access the table paragraph styles either.

  • How can I get rid of the background in a photo of a face?

    How can I get rid of the background in a photo of a face?

    Please post your picture. To upload it into a message, click the camera icon.

  • How to update ABSKZ field in the table EKPO

    Hi
    Is there any way to update the rejection indicator (ABSKZ) field of table EKPO?.
    I am looking at BAPI_CHANGE_PO FM, But it does not have ABSKZ field in the item structure BAPIMEPOITEM.
    Do I need to extend the BAPI structure with ABSKZ field ?
    Regards
    Raj.

    Hi
    To extend  BAPI_PO_CHANGE  for EKPO-ABSKZ field , we have to add field in the structure BAPI_TE_MEPOITEM to pass it to  EXTENSIONIN. As ABSKZ field already availble in the EKPO it is not allowed to add ABSKZ in the structure BAPI_TE_MEPOITEM. it is throwing below error message.
    Field ABSKZ in table EKPO is specified twice. Please check
    Since it is not Z field and also not availble in the structure BAPIMEPOITEM  not sure how to update ABSKZ field in the EKPO table.
    Please advice.
    Regards
    Raj

  • HT4623 How can update my iPhone to the last ios5. I dont want ios 6 as I want to keep google maps

    How can update my iPhone to the last ios5. I dont want ios 6 as I want to keep google maps?

    I disagree, Mr. WJ:
    If Matt had updated his iPhone via the Cloud and not by USB cable to his computer, the old IOS would still be on the computer and he would be able to "restore" to it. It would depend on what his backup settings were configured.
    For instance, I always backup to my computer at home. But, in the last few days I was notified that IOS 6.1 came out. So, if I wanted, I could install the update via WIFI from where I am at work. But, my old IOS would still be safe on my home computer that I can restore from if need be.
    And then you basically repeated what I stated about Google Maps being a app you can download now.
    Who loves ya, baby?

  • How to run an application in the background when iMac starts up?

    Hi,
    I installed TextExpander a couple of months back. It normally runs in the background and doesn't appear in my list of running applications when I cycle through them with Cmd+Tab. This is how I like it.
    Of late though, TextExpander starts up when I switch on my machine, but it now appears as an application running in the foreground; if I Cmd+Tab through my running applications, TextExpander is listed among them.
    I'd prefer if I did not see it when switching between applications.
    I've tried restarting the machine, but to no avail. Also, there is nothing in the preferences to run in the background.
    (Possibly unrelated: I don't recall doing anything in particular that might have caused this change in behaviour, but I have noticed recently that TextExpander has found an 'older version' and is asking me if I want to remove it. I don't remember updating it to a newer version, and I don't believe I have it set to auto-update.)
    Can anyone explain how I can make it run in the background? I'd be very grateful.
    Thanks and best regards,
    Ken.

    Mc128k wrote:
    To run your app as a daemon (if you are really sure it can) check the app's preferences panel, there should be sometthing like "show in dock".
    A little embarrassing, but +there is+ an option within TextExpander's preferences to "Hide TextExpander icon in Dock". Don't know how I missed it. I checked the preferences on two separate occasions! Feeling a little morto'ed.
    In any case, to confirm what I've done:
    -Within System Preferences > Accounts > Login items tab, I have selected the "hide" checkbox for TextExpander.
    -Within TextExpander's preferences, I selected the "Hide TextExpander icon in Dock" checkbox.
    TextExpander still runs, but doesn't appear in the Dock or in the list of running applications (that I can switch between with Cmd+Tab).
    Result!
    Tx for your help.

  • How do I find and save the background music file of my Flash site?

    I see that the background music in my Flash site is located in a symbol called muz.  When I click the properties of this symbol, the sound file's location is listed as .\flash\sound\muz.wav  I couldn't find that sound sub-folder in the flash folder nor could I find the file.  I tried doing a search to look for the muz.wav file in my computer but it could not be found.  Does anyone know how I can find and save this file?  Can the symbol somehow be exported and the sound file be extracted that way?

    I copied and pasted the symbol into an empty .fla file.  This new .fla file is just 1 frame.  Can you tell me what you mean by "spreading" it along the timeline?  When I tried exporting it to a .wav file (as just 1 frame in timeline), I only hear a fraction of a fraction of the first note of the music in the generated .wav file.  The music is heard fine in its entirety when previewing the .fla file (F12).
    By the way, in the symbol's properties, there is an option to "Export for ActionScript" and an option to "Export for runtime sharing".  Do you think any of these would work?

  • New iTunes update wont run in the background

    When the last update for iTunes came out I was pretty excited to see the new layout. When I was done installing I was really impressed with the new setup. I do however have this one problem. I used to run iTunes in the background when I was playing games or watching subtitled movies where the sound doesnt matter. Now whenever I do this playback from iTunes gets choppy, like when the needle arm on a record player gets constantly bumped. I was just wondering if there was a new update I have missed since this one came out or if I can just rollback my version of iTunes

    Almost all people fix this with very simple steps....
    1) Goto the PC makers site and update your sound card/driver (May as well install all updates they offer for your model while there)
    2) In Windows goto Control panel>Quicktime>Audio tab check "Safemode" hit OK and reboot for the settings to take
    3) Also try going to Microsoft.com and updating your DirectX

  • How do you make a picture the background in Pages?

    I have a photo from Google and I want to make it the background of my document on Pages, but I can't figure out how.  How do you do it? Thanks!

    One way is to create a text box. Then you can arrange the image to the back, text to front.
    Another way is to convert from word processing to page layout mode (accessed through File > Convert to Page Layout). The image can then be sent to the back.

  • How to update Reference field in the clearing document

    Hi Friends,
    While accounitng for billing document for sales Reference Key 2 is used for a data.
    Now when the payment is recieved from customer and accounted, how to update the Ref 2 automatically from the primary document.
    Pl, suggest.
    Thanks
    NNS

    Hi Robert,
    Thanks for answering.
    I am looking at Ref 2 should flow automatically to clearing document from the accounitng document for billing.
    Ex: Billing document is created and accounted. Ref 2 is AB
    Now when receipt is accounted for this biling document this AB should flow automatically to Ref 2 field.
    Thanks
    NNS.

  • How to update a chart when the array is updated

    Hi I am using an array to populate a chart in FB3 and having trouble updating the chart when the array is updated.
    Chart
             <mx:Label id="archiveTitle" x="10" y="10" text="Current Archive " fontSize="14" fontWeight="bold"/>
             <mx:PieChart id="chart" height="130" width="300" color="0x323232"
                showDataTips="false" dataProvider="{ratingAC}"  y="22">
                 <mx:series>
                    <mx:PieSeries field="Rating"/>
                </mx:series>
            </mx:PieChart>
    Array + Vars
             [Bindable]
             public var newsDB:ArrayCollection = mx.core.Application.application.newsDB as ArrayCollection;
             [Bindable]
             private var positive:int = 1;
             [Bindable]
             private var neutral:int = 0;
             [Bindable]
             private var negative:int = 0;
             [Bindable]
             private var ratingAC:ArrayCollection = new ArrayCollection([
             { Rating: 1 },  // no data
             { Rating: positive }, // [0] positive
             { Rating: neutral }, // [1] neutral
             { Rating: negative }  // [2] negative
            private function init():void{
                   buildChart();
                   newsDB.addEventListener(CollectionEvent.COLLECTION_CHANGE, test);
                   newsDB.addEventListener(CollectionEvent.COLLECTION_CHANGE, buildChart);
            private function test(e:CollectionEvent):void{
                 trace("array changed");
                 positive = 20
            private function buildChart(e:CollectionEvent=null):void{
                 for(var i:int; i<newsDB.length; i++){
                      if(newsDB[i].rateItem == 0){
                           trace(positive);
                           positive += 1;
                           //ratingAC.setItemAt(positive,0);
                           trace(positive);
                      if(newsDB[i].rateItem == 1){
                           neutral += 1;
                      if(newsDB[i].rateItem == 2){
                           negative += 1;

    Sorry, in my app I have an ArrayCollection of items from a news feed that the user has deemed important, and given each item a rating. The For loop will loop through the "newsDB" array and set the var accordingly (positive, negative, neutral). The variables are what is populating the arrayCollection (ratingAC). How would I either a) bind the variables to the ArrayCollection so that it updates when one has changed, or b) update the specific index in the array collection. When debugging, i notice that the variables are updating, but the arrayCollection is not.
    Thanks in advance!

  • HT4053 i want to know how to update my 4s with the ios7

    I need help upgrading my iPhone 4s to ios7.

    See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
    IPhone, iPod Touch, and iPad iOS Compatibility Chart
         Device                                       iOS Verson
    iPhone 1                                      iOS 3.1.3
    iPhone 3G                                   iOS 4.2.1
    iPhone 3GS                                 iOS 6.1.x
    iPhone 4                                      iOS 7.0.x
    iPhone 4S                                    iOS 7.0.x
    iPhone 5                                      iOS 7.0.x
    iPhone 5c                                     iOS 7.0.x
    iPhone 5s                                     iOS 7.0.x
    iPod Touch 1                               iOS 3.1.3
    iPod Touch 2                               iOS 4.2.1
    iPod Touch 3                               iOS 5.1.1
    iPod Touch 4                               iOS 6.1.x
    iPod Touch 5                               iOS 7.0.x
    iPad 1                                          iOS 5.1.1
    iPad 2                                          iOS 7.0.x
    iPad 3                                          iOS 7.0.x
    iPad 4                                          iOS 7.0.x
    iPad Mini                                      iOS 7.0.x
    iPad Air                                        iOS 7.0.x
    =====================================
    Select the method most appropriate for your situation.
    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

  • How to update infotype 0006

    Hello,
    I want to update infotype 0006.
    I tried the things in following way using 'HR_INFOTYPE_OPERATION' function.
    CALL FUNCTION 'HR_INFOTYPE_OPERATION'
        EXPORTING
          INFTY                       = '0006'
          NUMBER                   =  PERNR
          SUBTYPE                  =  '1'
          VALIDITYEND           = IT_PA0006-ENDDA
          VALIDITYBEGIN        = IT_PA0006-BEGDA
          RECORD                   = ls_p0006
          OPERATION              = 'CHANGE'
         TCLAS                      = 'A'
          nocommit      = ''
          dialog_mode   = '0'
        IMPORTING
          RETURN                   = RETURN.
    Function was executed successfully but there was no updation in the record.
    Thanks in advance.

    ****Data declaration
    Return Table for ENQUEUE - DEQUEUE messages
    DATA: zreturn TYPE bapireturn1,
          user TYPE sy-uname.
    DATA: wa_0001 TYPE p0001.
    ****Lock the pernr for editing
              CALL FUNCTION 'HR_EMPLOYEE_ENQUEUE'
                EXPORTING
                  number       = pernr
                IMPORTING
                  return       = zreturn
                  locking_user = user.
    CALL FUNCTION 'HR_INFOTYPE_OPERATION'
                  EXPORTING
                    infty                  = '9009'
                    number                 = wa_0001-pernr
                   validityend            = wa_0001-endda
                   validitybegin          = wa_0001-begda
                    record                 = wa_0001
                    operation              = 'MOD'                  "It can be 'INS' for insert or 'DEL' for delete
                 IMPORTING
                   return                 = zreturn
    *******Unlock the Pernr
                CALL FUNCTION 'HR_EMPLOYEE_DEQUEUE'
                  EXPORTING
                    number = pernr
                  IMPORTING
                    return = zreturn.
    Hope this will help you.
    Regards,
    Aniruddha

Maybe you are looking for