How to update picked qty as delivery qty while creating outbound delivery

Hi,
I am using badi definition LE_SHP_DELIVERY_PROC to update delivery qty as picked qty at the time of creating delivery. By using method SAVE_DOCUMENT_PREPARE I am populating delivery qt(yCT_XLIPS- G_LFIMG) to picked qty(CT_XLIPS[1]-PIKMG). and i am also populating update flag as 'I'. after saving the delivery document i am not able to update picked qty which was populated in BADI. could you please suggest anything needs to care. thanks in advance.
Regards,
Peranandam

Hi,
I did a little test and, within the method CHANGE_DELIVERY_ITEM, itu2019s possible to fill the picking quantity (structure CS_LIPSD) but unfortunately during the save the added information is lost.
This is because the BAdI method is fired too soon and the routine PICKMENGE_BEARBEITEN (SAPFV50P) is not called at all.
The problem is quite complex; even after changing the picking quantities, the picking status still remains open!
The picked quantity is generally filled:
u2022     by printing the picking list
u2022     Warehouse Management by creating a transfer order
u2022     or by manual entry
Otherwise, it is assumed that picking has not yet been initiated and the result is that picked quantity is ignored.
In my opinion itu2019s very difficult to solve your problem using only the BAdI implementation.
I suggest you to propose an alternative solution such as the automatic processing of Picking Output EK00; easy to activate and absolutely standard!!!!!!
Regards,
Andrea

Similar Messages

How to Update picking qunatity while Automatic picking is active

Hello All,
I have a requirment of updating the Delivery pick quantity.
I am updating the it through BAPI,
Is there any other way of updating picked qunatity in case automatic picking is active.
Please suggest
regards,
SNB

Hello,
Please look into below thread links for the same issue:
Updating Picking Quantity using VL02N ?
how to update picked qty as delivery qty while creating outbound delivery
Hope the information is useful
Regards,

Updating picking qty from Shipment confirmation

Hi frenz,
       We got a requirement that when we get 856(shipment confirmation) from our external warehouse, we gotta update the picked quantities in delivery document and ASN has to be sent automatically.
       Can anyone help me on where to write coding for updating picked quantities on delivery document? Else do we have any standard way for doing this?
        Thanks in advance.
praveen

hi vinod,
          I know this function module already; Any way thanks for your reply. But i want some more information regarding this scenario. Like where do i write this code (do we have any exits?). N e way thank you for ur reply.
                                           ---praveen.

Exit to set the automatic PGI and picking while creating outbound delivery

Hi experts,
Could anybody suggest how to set the automatic PGI and Picking while creating outbound delivery.
Currently we are settting VBUK-WBSTK field with value C. But PGI is not happening.
kindly help me.
Regards,
Ravi

Hello Parihar,
thanks for reply.
yes we know that "This process of picking and GI involves reducing the stock and allocating the goods to the delivery"
if you go for Custom program and Use FM WS_DELIVERY_UPDATE, we can do Picking and PGI.
our requirement is to do pickong and PGI while creating Delivery it self, based on this output types will be processed.

Automatic Batch determination while creating outbound delivery

Hi,
I have already performed following steps, but still i am facing problem for Automatic Batch determination while creating outbound delivery :
1.CT01- Creation of Characteristics. ( Define Selection Class )
2.CL01- change. ( Define Selection Class )
Add Characteristics in u2018CHARu2019 tab And save .
3.CU70 u2013 create u2018Sorting Sequenceu2019 and assign characteristics
4.Batch Search Procedure & Strategy type
V/C3 u2013 Batch Search Procedure and assign the strategy types
a.To create condition type T. code V/C1
b.To create access sequance T. code V/C2
5.V/C5 - Allocate SD Search Procedure/Activate Check u2013 assign sales organization , order type into Batch search procedure.
6.V/CL - Activate Automatic Batch Determination in SD - Activate automatic batch det. for delivery item categories u2013 select item category and activate auto batch determination
7. VCH1 u2013 Create batch search strategy against strategy type as per the access sequence needed.
Please let me know is there any other step, apart from it.
Tx
Uts

Dear saravanan,
Re :Check from ur material master view ' Sales: General/Plant Data' that availability check should be 02 and batch management should get activated .
Done!
Re: check CT01 - addnl data table name and field name maintained ( which field to be taken for batch determination )
Done!
Re:check CL01 - char - is maintained with CT01 char
Done!
Re: check from v/c1 'Sort sequence' and Qty proposal 1 are maintained correctly.
Done!
Still i am not able to get batch automatically...
Is there any LIFO or FIFO settings i have to maintain in Material master.
Pl guide.
Tx
Uts

Update Pick Qty in Delivery

Hello
I am trying to use FM SD_DELIVERY_UPDATE_PICKING_1 for updating the pick qty in the delivery. My scenario has 2 line items each having a batch split line. I need to update the pick qty for these batch lines from a Z transaction where the user inputs the pick qty.
The problem is that the pick qty is getting updated always with the delivery qty even if the user enters a pick qty value less than the delivery qty.
It would be highly appreciated if anyone can suggest where the problem might be (i may not be using the FM correctly).
Thanks in Advance.

Have you check the FM
RV_DELIVERY_PICK_UPDATE
RV_DELIVERY_PICK_VIEW
Thanks

Update picking quantity in delivery for batch split items

Hi,
I'm trying to use the function module WS_DELIVERY_UPDATE to update the existing deliveries. I'm able to do batch split for the items in delivery using the same FM. I have also requirement to delete these items (batch split items).
To delete these items first we have to make quantities to zero. So I'm able to make delivery quantity of these items to zero but not picking quantity.
If we do not make picking quantity also zero it will not allow to delete these items
and gives an error message saying "item is already made available for transfer order".
Could some one let me kow how to make picking quantity also zero for batch spit items using FM.
Thanks

Hi Vikram
To nullify the Picking Quantity, we can use FM: <b>SD_DELIVERY_UPDATE_PICKING</b>.
Parameters to be passed:
VBKOK_WA
-- VBELN_VL - Delivery Number
-- VBELN - Sales Document Number
SYNCHRON - 'X'
VBPOK_TAB
-- VBELN_VL - Delivery Number
-- POSNR_VL - Delivery Item Number
-- VBELN -- Sales Document Number
-- POSNN -- Sales Document Item Number
-- MATNR -- Material Number
-- LFIMG -- '0.000'.
Have tried this in both cases whereby we have partial picking done and full picking done and worked for both cases.
Please try on your end too...
Hope this helps.
Regards
Eswar

How to update pick up date (VBAK-ABHOD) field in sales order

I am creating sales orders using BAPI_SALESORDER_CREATEFROMDAT2 but it is not updating VBAK-ABHOD field i .e pick up date. Is there any FM which updates the pick up date VBAK-ABHOD also.
I need to update pick up date for a special type of sales orders (Delivery orders) which are created in reference to schedule agreement.
Is there any other way we can update pick up date. My last option is BDC but donot want to use it.
Thanks in Advance.
Rajesh.

Hi Rajesh,
You can not find any field in BAPI Change Or Create for sales order even header change BADI is for SAP Modification only. The best way to code in form USEREXIT_MOVE_FIELD_TO_VBAP in MV45AFZZ, orelse you can use CALL TRANSACTION Method.
Please let me know if you have any issues.
Thanks and regards,

Update picked quantity and delivery quantity in picking.

hi,
i completed delivery with reference of sales order, and also complete pgi useing tc vl02n . i want any standard function module or BAPI for update the picked quantity and delivery quantity in picking.
thanks in advance.

Hi Dhanush,
Refer to the function module WS_DELIVERY_UPDATE for pick, pack, update serial numbers & PGI functions of the delivery.
Hope it helps!
Thanks!
Preethi.

Updating Serialnumbers automatically while creating Outbound Delivery

Hi Experts,
My requirement is to populate serial numbers automatically while saving the outbound delivery (VL01N).
I tried with user exits, but I am unable to succeed.
I am using ECC5.
Any help would be greatly appreciated.
Thanks,
Veera K

Hi Veera,
For an example if there is a need to update some table with delivery number and serial number on saving a delivery:
in include MV50AFZ1:
FORM USEREXIT_SAVE_DOCUMENT.
*{ INSERT <TR#>
"work structure LIKP has the header info here
"Use that and fill the required workstructure and update the correponding table
*} INSERT
ENDFORM.

Enhancement to change the quantity while creating outbound delivery

Dear All,
Is there any enhancement to change the Actual Quantity while creating the Outbound delivery.
I have tried using the BAdI LE_SHP_DELIVERY_PROC in the method CHANGE_DELIVERY_ITEM. But i am not able to change the quantity. In the runtime it allows me to change the quantity. After saving the document the quantity is not changed.
I do not know what all are the parameters and fields to be passed to change the quantity. If anyone knows please help me.
Anyone guide me to do this requireemnt.
Thanks & Regards,
M.Ashok kumar.

Hi Ashok,
I have a similar issue, i have done the same as you did by changing the fields LFIMG_FLO and LGMNG_FLO.
But though Delivery qty is getting update but picking qty is remaining the same.
Suppose when user give Delivery qty as 8 and Pick qty as 8, i am able to change the delivery qty to 5 but not Pick qty to 5.
can you please let me know how to acheive it.
Regards,
Kartheek.

Issue while creating Outbound Delivery using Standard BAPI

Hi all,
I am trying to create an outbound delivery for a Sales order using the Standard BAPI - BAPI_OUTB_DELIVERY_CREATE_SLS.
After giving the valid inputs for Sales order no and doc no, am getting an error as "No instance of object type OutboundDelivery has been created. External reference:" But when trying to create manually there is no problem. Please suggest what may be the issue and how to correct it?
Regards,
Vimala P

Hi Vimala,
I am trying to create outbound delivery using BAPI_OUTB_DELIVERY_CREATE_SLS & BAPI_DELIVERYPROCESSING_EXEC. But no success. Getting "No instance of object type outbound delivery has been created" in return.
1) Delivery Type
2) Delivery selection date
Needs to be passed in import parameters.
Could you please tell me what are all the parameters to be passed under tables tab in RV_DELIVERY_CREATE?
Thanks in Advance..
Regards,
Rajasekar .M

How to customize Category and Category items list while creating New Model

Hi,
what the most convenient way to customize the Category and Category items list while creating New Model?
This is standard:
Now, what we want to achieve, is to customize this menu, to:
1. Display in the Category window only f.e. two categories:
- EA Diagrams
- BPM Diagrams
2. In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available. Additionally, it should behave like a hierarchy ... meaning you can create the second diagram, only as child (related diagram) of the first diagram etc.
I know, excluding the particular diagrams/diagram elements can be configured using the right/profile settings, but how to:
1. Customize the standard New Model menu window
2. Create copies of City Planning Diagrams with different set-ups
3. Set the relationship between diagrams
Is such a configuration change possible?
Thanks a lot for your help!
Regards,
Rafal

Now, what we want to achieve, is to customize this menu, to:
Question #1. Display in the Category window only f.e. two categories:
- EA Diagrams
- BPM Diagrams
Click on Tools => General Options=> Model Creation
Click on Properties => at right of Default category set
Note : Model template does not work as Category. We can't set. An enchancement request has been open to SAP
In the following example I defined a new default (MyNewDefault.mcc). As you can see only BPMN models are available.
To create a new category set with BPMN choice
a) Copy default.mcc in MyNewDefault.mcc file.
    Go to Tools=>General Options=>Model Creation : Select your new category
    Go to Tools=>General Options=>Model Creation : Edit properties and remove all things you does not want keep
or
b) Go to Tools=>General options=>Model Creation : Edit properties and click on Save as button and specify the file name "MyNewDefault".
    Quit the window.
    Select you new category : Go to Tools=>General Options=>Model Creation : "MyNewDefault"
    Edit properties and remove all things you does not want keep.
    Save you new category
Question #2. How to define copies/replicas of existing diagrams
     Wrote an extension
Question #3. How to make sure, particular diagrams can be used (created) only on predefined "levels" and how to set the parent-child relationship, so that PD enforced it directly when creating a new diagram.
     Specify yours conditons in your extension attached to your model
     Example : When the user want create a child diagram : You can display a list of Parent Diagrams to select from.
     You can set in your extension by VBScript parent-child relationship
Question #4 In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available.
If I understand well your question. I suggest to take a look in
Repository=>Administration=>Objects Permission Profile
You can specify objects to show, mask, deactivate at model level.
You can specifiy your own metadata.
But I'm not sure you can mask, deactivate functions following diagram selection. It seem to specific.
Message was edited by: Benoit Le Nabec

How to restrict the the oreder reason list while creating sales order

Hi gurus,
Can anyone suggest me
how to restrict the Order rerson list
while creating the sales order in VA01
Thanks & Regards
kalyan.

hi,
Try this exit:
Enhancement MMFAB001 User exit for generation of release order
Thanks,
AMS

Problem in updating Pick Qty using SD_DELIVERY_UPDATE_PICKING_1

Hi,
    I am updating the picking quantity in a delivery document using function module SD_DELIVERY_UPDATE_PICKING_1.
     However the document flow shows the picking request is still Open and not Completed. This does not happen when I do this online. Am I missing something in the parameters.
      Please advise as the documentation of this function module is not very clear.
Thanks and Regards,
Aditya

Hi Ranjith,
         Thanks for all your input. I also posted a message to SAP and they recommended SAP Notes 457925 and 491875.
     I might go in for BDC as a last resort on VL02N since time is quite a constraint.
     I really appreciate the inputs you have given.
     Actually my customer system is running on mySAP ERP ECC 5.0 so it would certainly have all the note corrections mentioned in the several notes
Thanks and Regards,
Aditya

How to update picked qty as delivery qty while creating outbound delivery

Similar Messages

Maybe you are looking for