How to Upgrade java version on J2EE Engine Server?

Hi Experts,
We are running the NetWeaver 2004s SP 7 with Java version 1.4.2_08 on the server, but we would like to upgrade the system and be able to upgrade to Java version 1.5. How do we start? We would greatly appreciate your responses.
Thanks,
-Don P.

but we would like to upgrade the system and be able to upgrade to Java version 1.5
Can you explain this more accurately? For example the OS version
Are you say about SUN or IBM JDK? I'm think you say about SUN JDK ...when only 1.4.2.XXXX can be installed for
NW 7.0, Do not use
Java version 1.5
In any case Try to check the
Note 709140 - Recommended JDK and VM Settings for the WebAS630/640/7.0
You will see all JDK/OS mixes and link's to recuired notes ....
About how to change java version, for example to newest release ? -->
Note 718901 - How to Change the JDK of the J2EE Engine
Regards.

Similar Messages

  • How to upgrade java version in Oracle 11g 11.2.0.1

    The java version of my oracle database is 1.5.0_10.
    How do I upgrade it to java 1.7.0_10
    Thanks

    Hi,
    I believe you can not update into the database, Please check the Compatibility matrix for that.
    What Version of Java is Compatible With The Database JVM? [ID 438294.1]
    You can use any Java version you want outside of the database
    HTH

  • How to get Java Version of an application server using Function Module?

    Hi Friends,
    We are doing developments for system performance reporting for multiple BW Systems. For this purpose we need to get the JAVA Version for these multiple systems.
    If anyone tell us about any Function Module or Program that we can use to get this information?
    Thanks
    Nayan Joshi

    Hi,
    Calling an SAP Function Module from Java
    To call an SAP function module from a Java application, you first need SAP JCo (Java Connector); you can download it from SAP's site, though you need an account to do so.
    To actually open the connection, use the tip code shown here.
    Class jcoClass = Class.forName("com.sap.mw.jco.JCO", true, this.getClass().getClassLoader());
    Client client = JCO.createClient(clientNumber, user, passWord, lang, host, systemId);
    //all parameters are strings
    client.connect();
    Repository repository = new JCO.Repository("SAP", client);
    IFunctionTemplate functionTemplate = repository.getFunctionTemplate
    ("YOUR_FUNCTIONAL_MODULE_NAME");
    Function function = functionTemplate.getFunction();
    ParameterList parameterList = function.getImportParameterList();
    parameterList.setValue("value1", "INPUT_PARAM_NAME");
    parameterList.setValue("value2", "INPUT_PARAM_NAME2");
    client.execute(function);
    Regards,
    Marasa.

  • How to upgrade java version

    We are at J2SDk14209. We want to upgrade to the latest j2sdk14212.
    what needs to be done on XI side?
    Thanks,
    Bhaskar

    Hi,
    No change is needed on the XI as such.
    Just install j2sdk1.4.12 and then try to open your IR and ID.
    Just take a back up of the CACHE folder of your JWS in case there is some issue in downloading the Jar files.
    Regards,
    Bhavesh

  • Where i find trail version of j2ee engine for client machine.

    Hi,
    I am new bee in sap netweaver . Now i have ecc 5.0 at my office. I need to make WebDyn pro application at my client side. For testing purpose i need to create java environment for running my dynpro applications. So please can any one tell me where i find trail version of j2ee engine for client machine.
    Please explain it and provide me paths where i download environment.
    Regards,
    Gurprit Bhatia

    "(also, my profile says that I'm running OS X 10.4.6, but I'm not really sure, that's just what one of the disks has written on it that came with my used and very cheap machine "
    Click on the blue Apple icon at the top left of your screen and choose About this Mac. That will tell you what your OS version is and what amount of RAM you have. The "More Info" button in the pop-up screen will give you the Apple System Profiler application and that will give you whole bunches of information on the drive space used etc.
    David

  • How do I stop and start J2EE engine manually on WEB AS

    I have installed WEB AS ABAP + JAVA. For some reason J2EE engine is not up after the Java stack installation. How to I start and stop J2EE engine. The visual Admin is not connecting either saying connection lost.
    I am running on Linux
    thanks

    Hi Dhandu,
    Please have a look in the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/6e/dd0041aafdf123e10000000a155106/frameset.htm">documentation</a>.
    Hope that helps!
    Vladimir

  • How to upgrade Php Version in solaris 10 SPARC ?

    How to upgrade php  Version 5.4.7 to latest version 5.5.3?
    Do we need to uninstall current version(5.4.7) and install latest version(5.5.3)?
    Or is there any way to upgrade directly.

    I'm suggesting to remove the initial package and then install a new version that is in the same package format.
    You can also compile it and modify the target installation directory during the compilation.

  • How to upgrade SAPCAR version?

    Hi gurus,
    I am trying to apply support packages using SPAM. But whenever i am
    trying to upload the Support Packages through frontend i am getting
    following error:
    "CAR error message: SAPCAR: can not change date
    for /usr/sap/trans/EPS/in/CSR0120031469_0034275.ATT"
    I down;loaded again the support package but still getting the same
    error.
    I tried to uncar the same in the application server but i still got the
    error while doing SAPCAR -xvf.
    I have got a solution to upgrade the version of SAPCAR. but i dont know how to do it?
    how to upgrade the version OF SAPCAR.
    Thanks & Regards,
    Priya

    Hi Priya..
    You don't need downtime to change permissions...
    You can run "/sapmnt/IRQ/exe/saproot.sh" script as ROOT user to set the permissions on Kernel Directory.
    OR
    Do as follow:
    # chown -R irqadm:sapsys /sapmnt/IRQ/exe
    # chmod -R 755 irqadm:sapsys /sapmnt/IRQ/exe
    # chmod 4755 /sapmnt/IRQ/exe/saposcol
    # chown root:sapsys /sapmnt/IRQ/exe/saposcol
    After that don't forget to set the permissions of BRTools (brbackup, brrestore, brarchive, brspace etc.) according to below note.
    [113747 - Permissions for DBA tools BRTools and SAPDBA.pdf|https://service.sap.com/sap/support/notes/113747]
    Regards.
    Rajesh Narkhede
    Edited by: Rajesh Narkhede on May 14, 2010 3:51 PM

  • How to upgrade labview version 7 to version 8

    Hi,
    1. I wish to know how to upgrade labview version 7 to version 8?
    2. If I save my VI under labview 7, how can I run in labview 8 and back to labview 7. What are the steps needed?
    Ridwan

    Yes, the option that Mike is speaking of is called File » Save for Previous Version ....
    LabVIEW 7 files will automatically open with LabVIEW 8, you don't need to do anything special.
    Kameralina
    Ask NI (ni.com/ask)
    Search The KnowledgeBase
    NI Developer Zone
    Measure It. Fix It. ni.com/greenengineering/
    NI Vision ni.com/vision/

  • How to upgrade old version of MacPro 1.1 with Lion 10.7.5 to Mountain Lion? There is some way by inserting 64 bit instead od 32bits. Reply to Stefan Erix

    How to upgrade old version of MacPro 1.1 with Lion 10.7.5 to Mountain Lion? There is some way by inserting 64 bit instead od 32bits. Reply how to do it to Stefan Erix, Uppsala, Sweden
    <Email Edited by Host>

    If you are a developer, or have a similar personality, there is an aftermarket EFI-64 "work-alike" program you can load into memory instead of 64-bit firmware. It is too complicated for regular folks.
    You must already have upgraded your Memory and your graphics card to use this solution, and your Mac will not operate quite normally. Any problems with it are unsupported.

  • How to upgrade the version above 10.4 in free

    hello,
    Now the version of my Mac OS X system is 10.3.9. How to upgrade the version above 10.4 in free.
    Thanks very much!

    You can't.
    An upgrade from 10.3.x to 10.4 is a paid upgrade.
    You need to purchase a retail copy of 10.4.

  • How to upgrade from version 3.2 to version 4

    Current using SQL Developer version 3.2.09.
    OS: SUSE Linux 11
    How to upgrade from version 3.2 to version 4?
    Thanks
    Scott

    Current using SQL Developer version 3.2.09.
    OS: SUSE Linux 11
    How to upgrade from version 3.2 to version 4?
    The documentation is your friend.
    All of that is explained fully in the Oracle documentation.
    Oracle makes their documentation available for FREE download. The Sql Developer Installation Guide covers nothing BUT how to install and upgrade the product.
    https://docs.oracle.com/cd/E39885_01/doc.40/e38928.pdf
    The user guide is also available
    https://docs.oracle.com/cd/E39885_01/appdev.40/e38414.pdf

  • I have a mac g5 with version 10.4.11 and wanted to know how to upgrade to version 10.5.8?

    I have a mac g5 with version 10.4.11 and wanted to know how to upgrade to version 10.5.8?

    If you call Apple at 1 800 MY APPLE, you can get a set of retail replacement discs of OS X 10.5 Leopard.
    Apple is supplying these on white DVDs for less than $20.
    You'll need to give them your Mac's serial number.
    See this link here.
    https://discussions.apple.com/message/21504111#21504111
    These were reported to work on any PowerMac G4 or G5.

  • Multiple Java version on one Single Server

    Hello All,
    Linux RedHat 2.4.21-32.ELsmp
    jdk1.3.0
    j2sdk1.4.1_03
    We currently have an application that only runs with java 1.3.0, but also we have other application that need to be on java 1.4.+.
    What would be the right approuch in order to have multiple Java versions on a single server.
    TIA,
    Bruno

    I am pretty sure you can do that.
    I have done this with AccessGates and a Webgate is just an AccessGate with extra features. I am pretty sure we have done this on Apache with a webgate in different directories. Makes logical sense that it would work.
    Thanks,
    Scott

  • My Applet start failed due to security warning after upgrading java version

    Hi Team,
    We have an application where we read the weight from the attached weighing Scale (Hardware device).
    For this we use one Applet which runs and reads the data.
    Now we upgraded the Java version from 1.6 to 1.7 and started encountering a security alert 'Running unsigned applications like this will be blocked in a future release because it is potentially unsafe and a security risk'.
    Our application runs on a HTP port not on HTTPS because this is installed in client premise and no risk in opening HTTP port internally.
    Could you please help us in resolving the issue. We don't want to see the alert even after upgrading the Java version.
    Thanks,
    Vijay G

    Turn off your phone > connect it to a wall charger for 30minutes > install SUS > use SUS to update/repair your phone
    Update Service (SUS)
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Maybe you are looking for

  • How to print from a planning view in APO SNP ?

    Does anybody know how to print on paper from the planning view in the planning book. I have made a view with a key figure. In the view, I can see the productnumber, the key figure and the values. Some users want to print it on paper.

  • Reset and reverse

    hi, i have question on FBRA and FB08. 1) only reset - i know it is from cleared to open item. i need to use FB08 to reverse. Q: if after reset i have 3 entries become open item, how to reverse these 3 entries via FB08? 2) reset and reverse - this is

  • Read multiple DAQ data packet in one WHILE iteration

    Hello, I am looking for a solution to the following problem : I am using a PXI-6132 to acquire an anlogue waveform, the DAQ is trigerred by the falling edge of an other analog waveform with the same theoritical frequency. What I would like to do is t

  • Web Service in Xcelsius

    Hi i created a web service in rich client and used it in Xcelsius the problem is that i get always the same valus even when editing th ws and importing it again with an additional column i still see the old design also when having a prompt in my ws i

  • How to default printing to details view

    I upgraded to 10.8 and now every time I print, it defaults to the small window whereas I want the Details view of the print menus by default. 10.6 used to be in Details mode all the time; how do I make it use the Details view of printing options?