How to upload data from PSA?

Hi,
I use BW 3.X
if i have load data to PSA, then how can I load this data to data target directly?

Hi,
if master data..
     In left panel select info provider
     Select created info area and right click to select Insert Characteristics as info provider
     Select required info object ( Ex : Employee ID)
     Under that info object select attributes
     Right click on attributes and select create transformation.
     In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
     Activate created transformation
     Create Data transfer process (DTP) by right clicking the master data attributes
     In extraction tab specify extraction mode ( full)
     In update tab specify error handling ( request green)
     Activate DTP and in execute tab click execute button to load data in data targets.
and if its transcation data..
     In left panel select info provider
     Select created info area and right click to create ODS( Data store object ) or Cube.
     Specify name fro the ODS or cube and click create
     From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
     Click Activate.
     Right click on ODS or Cube and select create transformation.
     In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
     Activate created transformation
     Create Data transfer process (DTP) by right clicking the master data attributes
     In extraction tab specify extraction mode ( full)
     In update tab specify error handling ( request green)
     Activate DTP and in execute tab click execute button to load data in data targets.
cheers
Sunil

Similar Messages

HOW TO UPLOAD DATA FROM EXCEL TO INTERNALTABLE

HI,
HOW TO UPLOAD DATA FROM EXCEL TO INTERNALTABLE? & WITH EXAMPLE.

hi,
chk this, put the data into an excel file.
fields inside it are name and age.
sample excel sheet.
coloumn 1 is name and column 2 is age
name age
A 8
C 13
D 55
DATA : int_excel LIKE alsmex_tabline OCCURS 0 WITH HEADER LINE.
data : record like db_name_age occurs 0 with header line.
DATA : v_start_col TYPE i VALUE '1', "starting col
 v_start_row TYPE i VALUE '1', " starting row
 v_end_col TYPE i VALUE '2', " total columns
 v_end_row TYPE i VALUE '10'. "total no of record
FORM f_upload .
CLEAR : int_excel, int_excel[].
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
 EXPORTING
 filename = wf_filename
 i_begin_col = v_start_col
 i_begin_row = v_start_row
 i_end_col = v_end_col
 i_end_row = v_end_row
 TABLES
 intern = int_excel
 EXCEPTIONS
 inconsistent_parameters = 1
 upload_ole = 2
 OTHERS = 3.
IF sy-subrc <> 0.
*Message is 'Unable to upload data from ' wf_filename.
 MESSAGE e169(zm050) WITH wf_filename.
ELSE.
 SORT int_excel BY row col.
 REFRESH : record.
 CLEAR : record.
 LOOP AT int_excel.
 CASE int_excel-col. "go thru each column.
 WHEN 1.
 record-name = int_excel-value.
 WHEN 2.
 record-age = int_excel-value.
 ENDCASE.
 AT END OF row.
 APPEND record.
 CLEAR record.
 ENDAT.
 ENDLOOP.
*inserting into table
modfiy db_name_age from table record.
ENDIF.
ANOTHER EXAMPLE
TYPE-POOLS truxs.
types: begin of t_tab,
col1(5) type c,
col2(5) type c,
col3(5) type c,
end of t_tab.
data : itab type standard table of t_tab,
 wa type t_tab.
data it_type type truxs_t_text_data.
parameter p_file type rlgrap-filename.
data ttab type tabname.
at selection-screen on value-request for p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'P_FILE'
IMPORTING
FILE_NAME = p_file
start-of-selection.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
I_LINE_HEADER = 'X'
i_tab_raw_data = it_type
i_filename = p_file
tables
i_tab_converted_data = itab[]
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
end-of-selection.
loop at itab into wa.
write : wa-col1,
 wa-col2,
 wa-col3.
endloop.
rgds,
anver
if hlped pls mark points

How to upload data from excel to SAP and options to be used

How to upload data from excel to SAP and options to be used
thank you,
Regards,
Jagrut Bharatkumar shukla

Hi Jagrut,
You can use gui_upload.
chk the sample program mentioned below.
REPORT ZFTP .
DATA: BEGIN OF I_FILE OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE.
DATA: BEGIN OF I_FILE2 OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE2.
DATA: W_COUNT TYPE I.
PARAMETERS: P_FILEN TYPE STRING,
P_FILE2 TYPE STRING,
P_NUM(4) TYPE N..
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILEN.
PERFORM F_FILE_GET USING P_FILEN TEXT-G01.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE2.
PERFORM F_FILE_GET USING P_FILE2 TEXT-G01.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = P_FILEN
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = I_FILE
IF SY-SUBRC <> 0.
MESSAGE E024(Z1).
ENDIF.
LOOP AT I_FILE.
W_COUNT = W_COUNT + 1.
IF NOT W_COUNT > P_NUM.
MOVE I_FILE TO I_FILE2.
APPEND I_FILE2.
ENDIF.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = P_FILE2
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = I_FILE2
FIELDNAMES =
*& Form F_FILE_GET
text
-->P_P_FILEN text
-->P_TEXT_G01 text
FORM F_FILE_GET USING L_FILENA L_TEXT.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = ' '
DEF_PATH = ' '
MASK = ',.,*.TXT.'
MODE = 'O'
TITLE = L_TEXT
IMPORTING
FILENAME = L_FILENA
rc =
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward if helpful.
Regards,
Harini.S

How to upload data from flat to ztables with in the same client by idocs

Hi Experts,
I have a requirement in IDOCS, I need to create a custom IDOC .I am working on IDES 4.6c. The reqirement is , there are ztables with header and item data. say for example Authors and Books. I need to upload data from flat file which is available in presentation server of the same client, which will updated in ztables by using idocs. For this i need to do ale settings also. The client is 800. There is no other client available. With in the same client i need to do the above stuff.
For this requirement how to approach (step by step) to accomplish.
Thanks in Advance.
Regards
J.S.Varma

Hi,
This is the procedure.
create segments using we31. don't forget to relaese it
create idoc using above segments using we30 don't forget to relaese it
create message type using we81
create function module to upload data using se37
maintain process code using we42
create partner profiles we20.
In the fm module itself write the code for downloading the data from presentation server by GUI_DOWNLOAD.
Then update the database tables directly by insrt through other internal table in the same client itself.
Thanks
Manju

How to upload data from excel to form using webutil

Hi,
In the sample provided by Oracle
http://www.oracle.com/technology/products/forms/htdocs/webutil/howto_ole.html
Note 247606.1 How to Copy Records From a Form Into Excel
It shown the methods of how to copy data from form to excel but is there any sample to provide the step on how to read the cell from excel into Form in 10g.

declare
args client_ole2.list_type;
application client_ole2.obj_type;
vworkbooks client_ole2.obj_type;
vdoc client_ole2.obj_type;
vworksheet client_ole2.obj_type;
vrange client_ole2.obj_type;
begin
-- create app object
application := client_ole2.create_obj('Excel.Application');
client_OLE2.SET_PROPERTY(application, 'Visible','True');
-- get workbooks object
vworkbooks := client_ole2.get_obj_property(application, 'Workbooks');
-- and open a file
args := client_ole2.create_arglist;
client_ole2.ADD_ARG(args, 'c:\tp_ae.xls');
vdoc :=client_ole2.INVOKE_OBJ(vworkbooks,'Open',args);
client_ole2.destroy_arglist(args);
-- get a worksheet object
-- for this to work you need to know the sheet name or its index
args := client_ole2.create_arglist;
client_ole2.ADD_ARG(args, 1); <-- name or index
vworksheet := client_ole2.get_obj_property(vdoc,'Worksheets',args);
client_ole2.destroy_arglist(args);
-- get a range object which in this case is just a cell
-- for this to work you need to know the cell coordinates
args := client_ole2.create_arglist;
client_ole2.ADD_ARG(args, 'B6');
vrange := client_ole2.get_obj_property(vworksheet,'Range',args);
client_ole2.destroy_arglist(args);
-- and here you get the value
message(client_ole2.get_char_property(vrange,'Value'));
-- release objects
client_ole2.release_obj(vrange);
client_ole2.release_obj(vworksheet);
client_ole2.release_obj(vdoc);
client_ole2.release_obj(vworkbooks);
client_ole2.release_obj(application);
end;

How to update data from PSA to target in BI 7.0

Hi all,
can you pls tell me the procedure/process to load data from PSA to data target. We got a load failure while activating the data in DSO.We made necessary changes to the incorrect data in PSA and we saved. When i run the DTP again it gives me 0 records. Is there any option like in 3.5 where we can select the PSA right click.....schedule the update/start the update immediate. or any other process which solves my problem.
Thank you all,
Regards,
Praveen

A new object concept is available for the ETL process as sap Net Weaver 2004. To implement the EDW layer paradigm, sap has changed the concept of the ETL data flow and process design.
    The most important innovations in the modified object concept are as followes.
1. When a Datasource is activated, a PSA table is generated in the inbound laywr of the BI so that data
   can already be loaded.
2 The infopackage is only used to load the data from the source system into PSA.
3 This is followed by the data transfer proccess (DTP) step to transfer data within the BI from one
   persistent object to another by using transformation and filters,
4 The definition for which data targets the data from the Datasource is to be updated into occurs in
   transformations. this is also where fields of Datasource are assigned to infoObjects of the target
   objects in bi.

How to upload data from flat file to datastore object in BI 7.0

Dear friends,
Please tell me
step by step process for upload data from flat file to datastore object in BI 7.0
<removed by moderator>
please help me
Thanks,
D.prabhu
Edited by: Siegfried Szameitat on Aug 17, 2011 11:40 AM

Create transformation on thr data source and keep the DSO as the target and load.
Ravi Thothadri

How to upload data from R/3 system to BW

hi friends,
i m new to SAP BW...........
i hv upload data from local pc file to SAP bw system............
but i dont know jow to upload data from sap r/3 system to bw.......?
pls tell me step by step procedure...for this..........?

Hi,
check out: http://help.sap.com/saphelp_nw04/helpdata/en/86/cade377806e664e10000009b38f842/frameset.htm
regards
Siggi

How to load data from PSA in BI 7.0

Hi,
Gurus
I'm trying to load data from PSA to my InfoObject masterdata but I can't get the change mode, so I change the processing to data Target.Right now its on PSA only
I will reward poaints
Regards
Alex

Hi,
I am just a beginner in 7.0, i had the same issue I loaded the master data in PSA but couldn't load in Data target i.e. info object (correct me if my understanding of your problem is wrong).
Try these steps:
1) Create and activate Transformation.
2) Create and activate DTP first then in DTP itself in Execute tab click "execute" ,go to infoobject right click on the info object you have created and select "maintain info object" , the datas will be loaded into info object
*Please assign points if useful.

Problem in uploading data from psa to active data and change log dso.

hi experts
my data from psa is coming to new data dso but not to active data and change log dso. can you please help me out...

Uday,
Please select the request from Manage screen of DSO and click on Activate, pop-up comes again select the request and click on Start. ( If it is Standard DSO ).
In case of Write optimized DSO you need not to activate it.
Regards,
Ramkumar.

How to load data from PSA to CUBE & DSO at a time using DTP in BI 7 ?

HI all,
I am new to BI 7 . How to load the data at same time to DSO & INFO CUBE using DTP.
Please provide me steps to load & plz specify which update mode I have to use ( FULL OR DELTA ) which one is best.
Plz Suggest me.
Thanks & Regards,
Kiran m.
Message was edited by:
kiran manyam

Below are the basic steps which we follow in any BI 2004S system:
1)Create datasource. Here u can set/check the Soucre System fields.
2)Create Transformation for that datasource. (no more update rules/transfer rules)
2.1) While creating transformation for DS it will ask you for data target name, so just assign where u want to update ur data.
DataSource -> Transformation -> Data Target
Now if you want to load data into data target from Source System Datasource:
1) Create infopackage for that data source. If you are creating infopackage for new datasources, it will only allow you update upto PSA, all other options u can see as disabled.
2)Now Create DTP (Data Transfer Process) for that data source.
3) NOw schdule the Infopackage, once the data is loaded to PSA, you can execute your DTP which will load data to data target.
If you are loading data from one one data target to other, no need to use PSA, you can directly execute DTP in that case.
Data Source -> Transformation (IP/DTP) -> Data Target1 -> DTP ->Data Target 2
Use the below link for detailed example:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fc61e12d-0a01-0010-2883-e2fc63ef729b
Infosources are no more mandatory with BI 7.0, below is the link to scenarios where we use infosources:
http://help.sap.com/saphelp_nw04s/helpdata/en/44/0243dd8ae1603ae10000000a1553f6/content.htm
Full or delta depends on your requirement...
chk the below thread to know better
difference between the various loads
hope it helps
Message was edited by:
sriram viswanathan

How to upload data from Infoset to Infocube

Hi Gurus,
I am trying to upload the data from , Infoset to Infocube, but its not allowing me in the transformations, showing error "Error while activating transformation " Message no. RSTRAN510
Infoset containing 3 Data store objects,
how the data gets loaded from infoset to Infocube?
how the delta mechanism works, since i am having 3 DSO's , ?
Thanks
Shiva

Hi,
But we have option, while creating transformation between infoset and Infocube,
Under Infocube, when we create transformation, we have the option from where we can uplaod, in that we have INFOSET also,
i could able to create Transformation, but not able to activate,
let me know, may be we cannot load from infoset to infocube, since we have the option, i think there is some way of loading data from infoset to infocube,

How to split data from PSA !!

Experts !
I have a data in PSA, its a big table. now my requirement is from PSA's first column ( usually in transformation we assign one column to one infoobject ) say for ex. in my first coumn of PSA i have data like this..."123 XYZ"
now, i have to assign 123 to one info object and XYX to another.
so, i guess my first part is working bcoz when it writes from PSA to targe field ( length is 3) so it only stores first 3 digits.
but how do i get last 3 char. to another target field ?
i guess its kind of combersome..let me explain differently....
In transformation, i want to do something like this ....
PSA's First Column -
> "123 xyz" -
> (Target Field) <----
 Insert "123" Here
( Target Field ) XYZ <----
 Insert "XYZ" Here
Thnax

ok great...
can you help me out with the rule ?
i have never writtne done ABAP b4.
if its easy wot write u can do sudo coding, i will really appreciated.
I have tried using formula, but looks like its not working
thanx

How to upload data from application server

Hi,
please help me out in uploading the data from application server which is a tab delemited file into an internal table.
Thanks
kumar

hi,
Use this sample code as an example.
table declaration
tables: mara.
*data declaration
data: begin of it_lfa1 occurs 0,
vendor like lfa1-lifnr,
land1 like lfa1-land1,
name1 like lfa1-name1,
ort01 like lfa1-ort01,
end of it_lfa1.
selection screen
selection-screen: begin of block b1 with frame.
parameters: p_file type rlgrap-filename obligatory.
selection-screen: end of block b1.
at selection screen
at selection-screen on value-request for p_file.
*& start-of-selection
start-of-selection.
perform transfer_file using p_file.
perform write.
*& Form transfer_file
text
-->P_P_FILE text
form transfer_file using p_p_file.
data: l_message(30) type c.
***opening dataset for reading
open dataset p_p_file for input in text mode encoding default message
l_message.
if sy-subrc ne 0.
message i001(zerr2) with p_p_file.
endif.
*******transferring data from file to app server.
do.
read dataset p_p_file into it_lfa1.
if sy-subrc = 0.
append it_lfa1.
clear it_lfa1.
else.
exit.
endif.
enddo.
*******closing dataset
close dataset p_p_file.
endform. " transfer_file
*& Form write
text
--> p1 text
<-- p2 text
form write .
loop at it_lfa1.
write:/ it_lfa1-vendor,
it_lfa1-land1,
it_lfa1-name1,
it_lfa1-ort01.
endloop.
endform. " write
Thanks
Aneesh.

In SRM How to upload data from Excel to Internal Table

Hello Experts,
As seen the Function Module 'ALSM_EXCEL_TO_INTERNAL_TABLE' does not exists in SRM.
Is there any alternative to upload the data direct from excel to Internal table using any other FM. As seach did't get any relevant FM.
Please advice..
Thanks..

did u try this
TEXT_CONVERT_XLS_TO_SAP
in this manner
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
      i_line_header              = 'X'
      i_tab_raw_data             = lt_raw
      i_filename                 = p_path
    TABLES
      i_tab_converted_data       = gt_output
    EXCEPTIONS
      conversion_failed          = 1
      OTHERS                     = 2.
this FM works on DOI
so
SAP document about DOI:
http://help.sap.com/saphelp_nw2004s/helpdata/EN/e9/0be775408e11d1893b0000e8323c4f/frameset.htm
SAP Demo Program about DOI: SAPRDEMOEXCELINTEGRATION.
the fm you mentioned works on OLE
so you could refer,
SAP document about OLE:
http://help.sap.com/saphelp_46c/helpdata/EN/59/ae3c98488f11d189490000e829fbbd/frameset.htm
Also you can refer this post
Download of SRM Contracts in Excel - Unit of Measurement Missing
Let me know if this works ..
Regards
Manthan.
Edited by: Manthan_R on Feb 23, 2010 12:18 PM

How to upload data from PSA?

Similar Messages

Maybe you are looking for