How to upload stocks of Materials having batches (Manu Srl. Nos)

Hi MM Gurus,
Users at our end have a requirement to upload stock balances of
1)     Materials without batches
a.     Used MI01 and specified plant with storage location
b.     Materials were entered without entering batches in MI01
c.     Saved MI01
d.     Through MI04 ticked zero count and entered quantity, saved
e.     Through MI07 posted the document
f.     System shows correctly the stocks updated for the materials
g.                  No problems for this
2)     Materials with batches
a.     Now the batches above relate to Manufacturing serial number
b.     E.g. Laptops for 20 nos have 20 batch numbers which we want to upload
c.     Went to MI01 and entered only 1 material viz. Laptop
d.     Now in the batches column, entered 20 rows for the 20 batches
e.     Against the 20 rows, when I tried to enter same Material 20 times, the system gave an error message
How do I resolve this problem? Have others faced this problem?
How can I upload stock of materials containing batches? Could be 20 or 100.
Please let me know how to resolve the same. Also under which heading would this appear in Help.sap.com?
Thanks in advance
M

Hello dear ,
use below t codes
CREATE BATCH                                                                    MSC1N
MATERIAL CODE AND BATCH POST ( PHY INVT DOCU)     MI01
INVENTORY COUNT                                                                     MI04
POST DOCUMENT                                                                      MI07
vijay

Similar Messages

How to Upload a file in a Batch Mode ?

Hi, I want to upload a Comma separated value File via RFC to a BW system.
The scenario is the following: From a Portal server i call the BAPI using JC0/JCA.
The problem is that GUI_UPLOAD does not support a BATCH job. At least i get a error when calling the BAPI: Exception condition "NO_BATCH" raised.
How do i upload a file in a Batch Mode ?
Thanks,
Kai

Hi Kai,
Sorry for the delay. The delay was in trying to get to talk to the Basis team.
Here is how we have it.
On the message server of every instance, there will be a SAP admin id that is '<SID>ADM' or 'SAPSERVER<SID>' where SID is the system ID. We use the '<SID>ADM' user id.
On the external NT fileserver, there has to be a user id created on the NT box with the same SAP admin id and this id on the NT box should have access rights do Read/Write.
All of these have to be in the same domain (or different domains that have trust access to each other).
So, there is basis,network and security groups involved.
Once these are in place, we can have file access to the external fileserver box.
We use logical filenames at our place (Transaction FILE).
This makes all the file transfer locations well organized and manageable.
Hope that answers your question regarding this.
Regards,
-Ramesh

How to upload data into CRM using batch job

Hello,
I got some problem and need some hints.
I am uploading data from a flat text file (product data) into CRM using thefunction module GUI_UPLOAD. My program starts with a selection screen whereI enter the path and the filename of the program, then I click start, and
the data is transferred in CRM. This works perfect, and I can automaticallycreate service products in CRM.
Here comes the PROB:
But now I want to automize this procedure using a batch job that automatically picks up the file from the server and processes it automatically without any user interaction. BUT I always get an error saying that my function module GUI_UPLOAD can't run in batch mode. So
anyone has an idea how to do this? Any other function modules that can run in batch mode? Any other ideas?
Thx very much for ur help on this.

Hi Bill,
GUI_UPLOAD, like the name says, uses the SAPGUI to upload the data to theserver.. and in a batch job, you don't have the connection to a SAPGUI.
So you should use following kind of coding:
DATA MSG(100).
OPEN DATASET "FILENAM" FOR INPUT IN TEXT MODE ENCODING DEFAULT MESSAGE
MSG.
IF sy-subrc = 0.
DO.
READ DATASET "FILENAM" INTO [Your internal table].
IF sy-subrc <> 0.
EXIT.
ENDIF.
APPEND [Your internal table]P_DATA.
ENDDO.
ENDIF.
The file should then be available on the server.
Regards

Stock upload for bulk materials

Hi,
My client implemeted SAP four years back, all the stock is maintained at storage location level.
Now they implementing WM also.
My issue is How we upload stock into WM as the stock is already maintained at IM level.
Suppose if there is only one material then we can create new storage location and then if we do transfer posting from sloc to sloc automatically it will get reflect in WM also.
From there using LT10 we can move the stock to the destination storage bin.
But Here we have more than 1000 materials to upload. In that case we cant follow the above process as it takes lot of time and it is not the right process for bulk materials i guess.
can anyone give me the complete step by step process for this.
Regards,

Hello
1.Write a program for doing transfer posting at IM level.
2.Write a program in which you will give input of storage type & bin as destination details with material & qty details for uploading the stock at WM level.For WM stock upload you will be using LT01 transaction which will pick material from interim storage area 920 & push material into given destination bin
hope you got the idea.
Regards,
Prashant

How to upload the batch stock to bin level

Dear gurus
My client are going to implement WM i want to know how to upload existing batch stock to bin level.
regards
sam
Edited by: Csaba Szommer on May 25, 2011 12:10 PM

Hi,
You can use LSMW for Tcode LT01 to upload inital stock in WH.
So here u can enter all relevant data required like material, qty, batch, plant, Sloc etc..
Hope this helps you...
Rgds,
Kris.

How to Upload the Materials for one Plant and then copy the same to all oth

Hi All,
I am using Material Types NonStock, Service, Spare Parts and Trading.
How to Upload the Materials for one Plant and then copy the same to all other plants.
can anybody give response for this requirement.
Regards...
<b></b>

Hi,
Using MM01 Only we can upload Plant Details.
If you want to extend to other plant also, Use MM01 and select Plant view and give new plant details.
If you want to copy from one plant to another plant after selecting Plant view , next screen you can select From Plant and To Plant Details.
Reward Points If it helps you.
Regards,
Murali K

How to upload Materials into SAP

HI,
How to upload Materials into SAP using MATMAS05 Idoc type?

use the lsmw standard existing bapi or idoc method to upload the data into sap

Uploading stock balances

All,
I need to upload every stock balances for a storage location in system .
I am using batch management here .So in material master I am putting shelf life and Minimum remaining shelf life .
So suppose for a material shelf life is 30 days and Min Remaining shelf life 15 days .
I am uploading the initial stock of this material with MB1C (561) .
I need to put Manufacturing date while uploading . So it is giving an error that 'Shortfall of Remaining shelf life days ' .
Most materials is having this problem, because material received months earlier and during cut over I am uploading stocks now .
Please suggest the better way to avoid this error .
regards

Hi,
If material are already expired or near expiry then....its the business decision whether this stock should be uploaded in the system or not?
I am not sure about the feseability of this but a work around can be:
Go to MSC2N and change the Date of Manufacture/Expiry dates for that particluar batch. then try to upload, once materials are uploaded, you can again change the dates of manufacturing/expiry through same T Code.
Regards,
Sachin
Regards,
Sachin

How to upload schedule line from flat files to sap file

dear all,
i want to upload the schedule lines from flat files to sap schedulle lines
but the flat files have 15 schedule lines and the data is as per date
so how to upload that and the fields available in flat files are more than the sap screen
we are having more than 6 items
and 15scedule lines its abt 90data to be upload
for one customer in every 15 day
so how to do this
is there any direct use in functional side
with out the help of any abap
but my user will do it
so he need a permanent solution
with regards
subrat

Hi Subrat ,
u can upload the data either ( Master /Transaction) data with the help of lsmw. for that all u need to do is go through the lsmw and do it. in that u can go Batch input recording/ BAPI/ IDOC any of that. here i am sending the LSMW Notes go through it and do the work.
once u create the LSMW project then u can ask the data from user or u can explain the user about the program and can run the flat file to upload the data.
if u require LSMW material Just send me blank mail from u. my mail id is [email protected]
Reward if Helpful.
Regards,
Praveen Kumar.D

How to upload the RM and PM budjeted cost in sap.

Dear sap guru's,
             Could you please suggest me , how to upload the 2008 budjeted cost(RM/PM) in sap, One way i can upload the budjet Through materi master( costing2 tab) ie planed price1 or 2 , Please suggest me is there any other way to upload the Budjeted cost of (RM/PM), or if i upload in planed price 2 is there any effect in future. Kindly suggest me to this example ,
BUDJETED OCST                                              ACTUAL COST                 VARIANCE
                                                                                FG COST IS       -: 5 Rs            FG COST IS            : 4 RS                FG COST IS            :1 RS
Two materials under FG                  Two materials under FG
                         Budjeted Price                                       MAP
1) RM cost              ;- 2 Rs              RM cost              ;- 1 Rs                 RM cost              ;- 1 Rs
2) PM cost              :- 3 Rs.             PM cost             :- 2 Rs                   PM cost             :- 1 Rs
Please suggest me is there any report to view Total budjeted ocst , actual cost and variance report for Each FG wise and RM AND PM wise.
           Kindly consider this issue as an high priority one, pls guide me, my client is very much urgent.
Thanks & Regards,
Kumar.

. TCode : LSMW.
2. Enter Project name, sub project name and object name.
Execute.
3. Maintain object attributes.
Execute
select Batch Input recording
goto->Recording overview
create
recording name.
enter transaction code.
start recording
do recording as per ur choice.
save + back.
enter recording name in lsmw screen.
save + back
Now there will be 14 steps.
2. MAINTAIN SOURCE STRUCTURES.
Here you have to enter the name of internal table.
display change
create
save + back
3. MAINTAIN SOURCE FIELDS.
display change
select structure
source_fields->copy fields.
a dialogue window will come .
select -> from data file
apply source fields
enter No. of fields
length of fields
attach file
save + back
4. MAINTAIN STRUCTURE RELATIONS
display change
save + back
5. MAINTAN FIELD MAPPING & CONVERSION RULE
display change
click on source field, select exact field from structue and enter
repeat these steps for all fields.
save+back
6. MAINTAIN FIXED VALUES, TRANSACTION, USER DEFINED
execute
save + back
7. SPECIFY FILES.
display change
click on legacy data
attah flat file
give description
select tabulatore
enter
save + back
8. ASSIGN FILE
execute
display change
save + back
9. IMPORT DATA.
execute
display change
save + back
10. DISPLAY IMPORTED DATA
enter ok, it willl show records only.
back
11. CONVERT DATA
execute
display change
save + back
12. DISPLAY CONVERTED DATA
execute
display change
save + back
13. CREATE BATCH INPUT SESSION
tick keep batch input folder
F8
back
14. RUN BATCH INPUT SESSION.
sm35 will come
Object name will be shown here
select object & process
inputs given by KAPIL

How to Upload different Material with Different Selection View

Hello Experts!
Iu2019m new in ABAP and trying to understand methods of LSMW. Now I get a question for you guys. Let say I need to upload 10 different materials. Now for instance.
1st material has Basic data 1 and Basic data 2.
2nd material has Basic data 1, Purchasing and Purchase Order text
3rd material has Basic data 1, Classification, Purchasing, MRP 1, MRP 2 & MRP 3.
4th material has Basic data 1 & Basic data 2.
5th material has Basic data 1, Classification, Purchasing, MRP 1, MRP 2 & MRP 3.
And so on. Now here Iu2019ve notice that every material has different INDUSTRY SECTOR, MATERIAL TYPE AND SELECTION VIEWS. I understand that Industry Sector, Material Type and other data I can specify in my file but how I can control SELECTION VIEWS for different materials. Because for different Selection view coming screens will become different accordingly.
So can somebody can please tell me how I can control different select views for different material and upload it in SAP.
Thanks.

Hi
I understand that you are performing LSMW on MM01 transaction code..and are uploading through batch input in LSMW.
Actually, for a tcode like MM01 I dont think you should use LSMW, instead you can go with the BAPI: BAPI_MATERIAL_SAVEDATA.
The views is a serious problem with MM01 when performing using batch input..
So, go through the documentation in SE37 tcode for the BAPI...
The information you get there will help you on how to proceed.
Regards,
Vishwa.

How to tranfor stock from 1200 to 1300 plant,

How to tranfor stock from 1200 to 1300 plant, we will shift the production line and materials to 1300 plant.furtherly we wont produce any material in plant 1200 so how can tranfer the stock in SAP ?

Hi ,
Use T code MIGO or MB1B for transfer from on plant to other .
Use the movement type 301 for 1 step transfer .
Use movement type 303 followed by 305 for 2 step transfer .
Consult your MM counter part for the same as you wont be having the requisite authorization i guess.
Regards ,
Dewang T

If physicaly checked the stock found zero. how to enter stock zero in systm

if physicaly checked the stock found zero. how to enter stock zero in system
thanx

Hi
You can follow the following physical Inventory transaction for updating ZERO stock in the system.
Please go with following transaction
MI01>Create physical inventory document>Enter Document Date>Planned count date>Plant Code>Storage Location>Click on Enter button>you will get the separate screen>Enter material code>and click on SAVE button (Ctrl+S)>you will get Physical inventory document number. (MI02-Use for delete)
(After getting Physical inventory document number you go with MIO4)
MI04>click on enter button>you will get "Enter inventory count screen>Enter Phys. inventory doc.no>Fiscal year>Count date>click on enter button>you will get separate screen>Enter physical qty>and click on save button ((Ctrl+S)>you will get massage from the SAPu201D Count entered for phys. inv. doc. 100000112"
(After completed above transaction you please go with MI07)
MI07>you will get Post inv.differences: initial screen>Enter Phys. inventory doc.> Fiscal year> Posting date>click on enter button>you will get separate screen with deference qty>click save button (Ctrl+S)> you will get document number generated from the system (Diffs in phys. inv. doc. 100000112 posted with m. doc. 4900001246)
Physical Inventory:
Physical Inventory is a business process in which physical stock is matched with book (system) stock. It is legal requirement to carry out physical inventory at least once in a year.
Physical inventory can be carried out both for a companyu2019s own stock (Unrestricted, Quality, Blocked Stock) and for special stocks (Customer Consignment stock, Vendor consignment stock from vendor, Returnable packaging). This inventory is carried out saperately for both type of stocks.
Physical Inventory Processes:
Several inventory processes available for physical inventory which includes as follow:
1. Periodic Physical Inventory
o All stocks of the company are physically counted on the balance sheet key date
o Every material must be counted
o Entire warehouse must be blocked for material movements during count.
2. Continuous Physical Inventory
o Stocks are counted continuously during the entire fiscal year.
o It is important to ensure that every material is physically counted at least once during the year.
3. Cycle Counting
o In this method of physical inventory, inventory is counted at regular intervals within a fiscal year.
o These intervals (or cycles) depend on the cycle counting indicator set for the material in Material Master record as CC indicator in plant view data.
o With this Cycle Counting Method of Physical Inventory allows fast-moving items to be counted more frequently than slow-moving items.
4. Inventory Sampling
o Randomly selected stocks of the company are physically counted on the balance sheet key date.
o If found not much variance between the counted stock and the book book stock, it is presumed that the book inventory balances for the other stocks are correct.
Physical Inventory Process Cycle Flow
1. Creation of physical inventory document
- Physical inventory document(s) is created individually or using the batch program, click for more information
- The transaction codes for creation physical inventory are as follow
Individual Inventory documentation creation
MI01 - Individual physical inventory creation
MIS1 - Inventory Sampling document creation
MICN - Cycle count inventory document creation
Collective Inventory document creation
MI31 - Own stock without special stock
MIK1 - Vendor consignment
MIQ1 - Project stock
MIM1 - Returnable Transpiration material
MIW1 - Customer Consignment stock
MIV1 - Returnable material with customer
MIO1 - Material provided to Vendor (Subcontracting material)
2. Print physical inventory document
- Physical Inventory document can be printed based on the physical inventory document status and or item status
- Transaction code MI21 is used to print the inventory document where print default value can be populated
3. Count the physical stock
- Based on the inventory document printout, the warehouse person will check the stock of material physically and note that on print out. This is completely physical process.
4. Enter count in system
- On completion of physical count, the count result is needs to be entered in the system. This can be with reference (using Tcode MI04) or without reference (using Tcode MI04) to the physical inventory document.
- If count quantity for that material is ZERO then select ZC (zero count) column instead of putting 0 in qty field. If 0 is used for zero count then systm will consider that as "not counted"
5. Analyze difference
- Once count is posted in the system, difference analysis can be carried out using transaction MI20
- The output gives information based on the input criteria i.e. physical inventory document, plant, material etc.
- The output gives information about the book quantity, Counted quantity, difference in quantity and value.
- From this output list, you can carry out further process ie initiate recount, change count quantity, post difference
6. Initiate recount and follow the steps 3,4,5
- If found unacceptable difference, recount is initiated using directly from difference analysis list (transaction code MI20) or using transaction code MI11.
- New inventory document will be created for selected items or for entire document
- The original document items will be deactivated once recount is initiated so original document will not be available for further process.
- On initiating recount, you need to process same as for new count document.
7. Post the difference
- Several options are available for posting difference
- Post difference after count is posted using transaction code MI07
- Posting the count and inventory differences using transaction code MI08, here you have created physical inventory but not counted so with this you can count and post difference in sinle step.
- Entering the count without a document reference using trasnaction code MI10, with this you can create inventory document, enter the count and post difference in single step.
some more points for posting difference
- Posting period must be open to post inventory difference.
- The fiscal year is set by specifying a planned count date when creating a physical inventory document.
- Tolerence to crear difference per user group can be set in customization.
- The system will generate material document for the difference qty and post the value to appropriate account (for valuated stock)
- The movement type in material document will be 701 or 702 based on gain or loss of material.
Serial Numbers in Physical Inventory
If material is managed with serial number then it is possible to carry out physical inventory for material with serial number. There are some pre-requisite before you carry out physical inventory for serialized materials.
- Serial number profile must be maintained in the material master.
- the serialization procedure MMSL (maintaining goods receipt and goods issue documents) has to be assigned to serial number profile.
- The stock check indicator in the serial number profile should be configured.
- Maintain basic settings for the serial numbers in customization for Serial Number Profile.
- Configure serial number management for physical inventory in the Settings for Physical Inventory step in Customizing for Inventory Management.
Blocked Stock Returns are the stock which is return stock from Customer or the stock which can be return back to vendor. To restrict the usage of this stock mostly business do transfer posting for this mateial as BLOCKED stock
Thanks & Rgds,
Rajesh

How to upload file from desktop or C drive and send as attachments

Hello Experts,
Please tell me
How to upload jpg or gif or drawing files from desktop or any drive and store into R/3 by the same time I have to send mail as a attachment.
I heard that FM
SO_NEW_DOCUMENT_ATT_SEND_API1 is only to send as a attachment what ever the data is present in the internal table only.
please help me on that.

I m using this code its having attachment but I m not able to open the file. Please help me
I m using gui_upload to upload the file
PROGRAM ZTEST
       no standard page heading line-size 255.
DATA: xfile TYPE string.
data :     t_IW51 LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: OBJPACK   LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: OBJHEAD   LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
DATA: OBJBIN    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: OBJTXT    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: RECLIST   LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
data : email type table of BAPIADSMTP.
PARAMETERS : file LIKE rlgrap-filename OBLIGATORY.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR file.
CLEAR file.
CALL FUNCTION 'F4_FILENAME'
    IMPORTING
      file_name = file.
xfile = file.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename            = xfile
      filetype            = 'ASC'
      has_field_separator = 'X'
    TABLES
      data_tab            = t_IW51.
Creation of the document to be sent
File Name
DOC_CHNG-OBJ_NAME = 'SENDFILE'.
Mail Subject
DOC_CHNG-OBJ_DESCR = 'Send External Mail'.
Mail Contents
OBJTXT = 'Minimum bid : $250000'.
APPEND OBJTXT.
OBJTXT = 'A representation of the pictures up for auction'.
APPEND OBJTXT.
OBJTXT = 'was included as attachment.'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
Creation of the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
Creation of the document attachment
(Assume that the data in OBJBIN is in BMP format)
*OBJBIN = ' \O/ '. APPEND OBJBIN.
*OBJBIN = ' | '. APPEND OBJBIN.
*OBJBIN = ' / \ '. APPEND OBJBIN.
OBJBIN[] = t_IW51[].
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJHEAD = 'PICTURE.PDF'.
APPEND OBJHEAD.
OBJBIN[] = t_IW51[].
Creation of the entry for the compressed attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'PDF'.
OBJPACK-OBJ_NAME = 'PICTURE'.
OBJPACK-OBJ_DESCR = 'Representation of object 138'.
OBJPACK-DOC_SIZE = TAB_LINES * 255.
APPEND OBJPACK.
Completing the recipient list
RECLIST-RECEIVER = 'email_id have to enter here'.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
RECLIST-RECEIVER = 'ENTEG01'.
RECLIST-REC_TYPE = 'P'.
APPEND RECLIST.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
     DOCUMENT_DATA = DOC_CHNG
     PUT_IN_OUTBOX = 'X'
     commit_work = 'X'
TABLES
     PACKING_LIST = OBJPACK
     OBJECT_HEADER = OBJHEAD
     CONTENTS_BIN = OBJBIN
     CONTENTS_TXT = OBJTXT
     RECEIVERS = RECLIST
*EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
OPERATION_NO_AUTHORIZATION = 4
*OTHERS = 99.
CASE SY-SUBRC.
    WHEN 0.
      WRITE: / 'Result of the send process:'.
      LOOP AT RECLIST.
        WRITE: / RECLIST-RECEIVER(48), ':'.
        IF RECLIST-RETRN_CODE = 0.
          WRITE 'The document was sent'.
        ELSE.
          WRITE 'The document could not be sent'.
        ENDIF.
      ENDLOOP.
    WHEN 1.
      WRITE: / 'No authorization for sending to the specified number',
               'of recipients'.
    WHEN 2.
      WRITE: / 'Document could not be sent to any recipient'.
    WHEN 4.
      WRITE: / 'No send authorization'.
    WHEN OTHERS.
      WRITE: / 'Error occurred while sending'.
ENDCASE.

How do the Procurement of materials from projects?

Hi Friends'
How do the Procurement of materials from project s, here our Process is:
Whenever our engineers on site see any shortages he will send a report thro our customized InfoPath request form. Then we decide depending on the material whether to order to USA or Procure locally. Some mechanical parts we procure locally. For this in PR we give reference of WBS element. Purchase department raise PO, we receive material, sent to site And finally we charge USA(parent Company) for this amount against this project.
For the items like electronic cards, Critical mechanical parts to be ordered to USA we send the InfoPath form to USA. We get weekly shipments from USA. We create PR and also PO. No action by our purchase dept. The FREE OF CHARGE (FOC) material is received to us. Stores will do MIGO and then we dispatch to Site.
Friends please suggest how to do this Process through project systems. I need the entire configuration setting that we need to do and the process also, plz friends... I need these settings step by step.
Regards,
Hari
Edited by: Hari Krishna on Jan 3, 2009 12:39 PM

suggest attend course PLM220
If using only WBS then you have to raise PR from MM module and the material demand will not be driven from PS (except Easy Cost Planning)
If using networks then assign material component to network activity and set the item category as non stock item - this will trigger PR from activity

How to upload stocks of Materials having batches (Manu Srl. Nos)

Similar Messages

Maybe you are looking for