Stock upload for bulk materials

Hi,
My client implemeted SAP four years back, all the stock is maintained at storage location level.
Now they implementing WM also.
My issue is How we upload stock into WM as the stock is already maintained at IM level.
Suppose if there is only one material then we can create new storage location and then if we do transfer posting from sloc to sloc automatically it will get reflect in WM also.
From there using LT10 we can move the stock to the destination storage bin.
But Here we have more than 1000 materials to upload. In that case we cant follow the above process as it takes lot of time and it is not the right process for bulk materials i guess.
can anyone give me the complete step by step process for this.
Regards,

Hello
1.Write a program for doing transfer posting at IM level.
2.Write a program in which you will give input of storage type & bin as destination details with material & qty details for uploading the stock at WM level.For WM stock upload you will be using LT01 transaction which will pick material from interim storage area 920 & push material into given destination bin
hope you got the idea.
Regards,
Prashant

Similar Messages

Stock transfer for blocked materials

Hi,
I have blocked the material for procurement in MMR, in purchasing view in "Plant-sp.matl status" field...
Now when ever i am creating PR,PO i am getting error message as "Status "Blocked for procment/whse" of material XXXXX does not allow external procurement"...Till Here it is correct.
Now my requirement is, i do not want to procure this material, but i want to issue and do stock transfers for the remaining materials which are lying in my premises.
When i tried doing stock transfer i got error message that "Material XXXXX has status Blocked for procment/whse in plant XXXX
Message no. M7092..
I tried to change the message as warning in OMCQ,There i didnot found this message, so i created it and made it warning.
Now when i tried Stock transfer again i am getting same error.
Pl help.
Utsav

hi
goto OMCQ and click n new entry and then add this message as folows
version   00
Application Area   m7
Message number   092
and make this as WARning
or goto OMS4 and here for ur block indicator make the Purchasing msg. as A i.e. warning
regards
kunal
Edited by: SAP Learner on Jul 16, 2009 1:29 PM

Stock Transfer for Excisable Materials Using Movement Type 301

Hi,
We are having a Plant 1002 as excisable Materials.
During GR we following the process like GR (Part -I), Capture Invoice, Post Invoice.
Can we transfer the Material from Plant 1002 to other Plant, say 1001, using Movement Type 301?
Or we need to follow some other router for Stock Transfer for the Excisable Materials?
I was told by the ex-consultant that we would be using Mov Type 301 for all Stock Transfers, but I have a doubt, please guide.*
Regards,

Hi PK,
Here in Brazil we work with excisable material and when we have to transfer it plant to plant, we have to use IVA that performs tax posts on accounting document. Also, we have to create Nota Fiscal (BrazillianLegal Document).
I think you have to talk to your legal/accounting area in order to make sure which procedure you will have to use.
If you need tax posting on accounting document, then you will not be able to use 301 movement type.
We use MM/SD Plant to Plant transfer (movement type 861 / 862)
Depending on your Legal/accounting area feed back, you could use this scenario or just MM plant to plant transfer (movement type 303/305).
If they are ok with no tax postings on accounting document, then 301 movement type should be used.
Try to make a test, show then how it works, then you could get ok from then
I hope it helps you.
Best Regards,
Natan

Invoice verification (MM-IV) for bulk materials

Hi fellow SAP Experts,
We have a specific requirement for the invoice verification around bulk materials. When ordering bulk material, we almost always receive a larger quantity than ordered. So the quantity on the GR is larger than the quantity on the PO, and this difference can be as high as 10%. If in these cases we receive an invoice with the same quantity as on the GR, and the same unit price as on the PO, we don't want to have an invoice block for quantity (caused by the 3-way match).
You could reason to set up an upper limit of 10% for the quantity block DQ in transaction OMR6, but then this limit will be for all invoices. This is undesired, as we want to have tighter limits (e.g. 5%) for other types of products than bulk materials.
Has any of you guys faced a similar requirement in the past, and how did you approach the solution for it?
I have already read a lot of documentation on the invoice verification in SAP, but I can't find the solution to my problem in it. So any pointers in the right direction are highly appreciated!
Best regards, Paul van Rouwendaal

As far as I understand it now, the DQ block does exactly what you say Mitch: only block if the GR quantity is different than the invoice quantity (without taking the ordered quantity in account). Especially if you use the 'GR Bsd IV'flag on the PO.
When you don't want to receive more than you have ordered, you can set delivery tollerances in MM on posting the GR, but that is a completely different story. This is actually what we are thinking of using for the cases with bulk material.
Maybe we still need to extend the check (in enhancement MM08R002), but for now I think it will not be necessary.
Thank you all for your helpful replies!

Stock check for BOM materials

Hi gurus
Can anybody guide me how to check the stock for semifinish & raw materials used for this semifinished product in a single T Code. ( UR.QC,Blocked)
Thanks
Umesh

Hi manohar
After putting the t dode mb52 , I am not able to find the stock for semifinish as well as raw material ( Bom material)at a time
in a single screen.
Thanks
Umesh

Profit center document not created for initial stock upload

Hi Gurus
We have created initial stock upload for one of the inventory items through movement type 561.Though the profit center was populated in the line items the profit center document has not been created and when we go and run balance sheet profit center wise there are no results for display? Any suggestions ?

Hello,
Check your 3KEH Settings
Check your OKB9 account determination
Make sure you have profit center number ranges in GB02
Regards,
Ravi

Maintaining minimum stock only for few store materials

Dear All,
How can i maintain minimum stock level for few materials.
Can we maintain while creating mat in mm01 @ purc view or i need to do some other settings ?
B/regds,
CB

Hi,
You have to configure the MRP and maintain all the MRP parameter in to Material master.
After that Run the MRP by transection code MD03 , system will create the PR as per the data maintained in to MRP view of Material master.
Regards,
Manish

Any Std SAP Report on Inventory Movement Bulk MAterials & Back Flushed item

Hello
Is there any Standard SAP Report on Inventory Movements for Bulk Materials and Back flushed items ?

hi
try
MC.9 - INVCO: Material Analysis Selection, Stock
MC.B - INVCO: Material Analysis Selection, Turnover
MC50 - INVCO: Analysis of Dead Stock
MC42 - INVCO: Range of Coverage by Usage Value
MC44 - INVCO:Analysis of Inventory Turnover
try searching in SAP1 and SAP2
regards
kunal

Setting for no dependent reqmt should generate for bulk material

Hello guys,
I know that for bulk materials system doesn't create any dependent reqmt. In other words system doesn't consider these materials in planning run.But for information purpose you can see the planned order no for bulk material in production order of above material.
My question is where we maintain the settings for bulk material that system shouldn't create dependent requirements for them?

Hi,
As u know u can define Bulk material at MRP view of Material Master.
Please check with "Excl Bulk material" check box under the BOM Explosion tab at OPPQ for your Plant.
Pradeep

Unrestricted stock consideration for components in pure MT

Dear Experts,
I have a scenario where i want to run MD50 against sale order but i want the system to consider the unrestricted stock of components (and not the sale order stocks) when raising purchase requisitions or planned orders for components (SFG/RM/PM). Can you please tell the configuration/master data settings that i need?
Regards,
Sunit

Dear Sunit,
I have maintained strategy *20 in the FG and SFG*
Is SFG is going to be sold separately apart from FG ??
So I have 2 related questions- first, should the system not create planned order for the SFG and second, how do I know whether for the RM system is considering the unrestricted MTS stock or is it also considering the unrestricted sale order stock of RM ?
Are you creating sales order for SFG as strategy 20 is maintained
If indi/coll indicator is maintained then then you cannot find as sales order stock ( E ) for this materials
this materials will be consumed by un=restricted use stock
Suggestion - As per your initial query solution has been provided so please close this thread & raise new thread
Regards
Madhu

Quality data for stock uploading using movement type 561

Hi,
As system Go-Live business wants to have quality certificate for all FG from SAP. But part of data for quality certificate is of intermediate materials which is already conumed for production of FG so stock is zero for batch of consumed SFG. (ALL FG AND SFG IS BATCH MANAGED). We can upload FG part of quality data require for certificate as FG stock with batch number will be uploaded as initial stock upload with 561 goods movement. But how to manage SFG part of quality data, as stock for consumed batch of SFG will be zero and hence can not have inspection lot for SFG batch.
Can anyone suggest how to upload quality data for material?
Help to resolve this issue will be rewarded with points.
Thanks and regards,
Devang

Hai PK,
For Plant to plant stock transfer, follow the below steps,
1) create STO in ME21N with Item category U
2) create delivery document
3) PGI
4) create Excise Invoice
5) create Billing document
6) GR at receiving plant referring delivery doc. and perform Excise capture simultaneously or separately
Hope it will helps you..
Thanks & Regards,
Kumar

Accounting entries for initial stock upload (URGENT HELP NEEDED)

Dear all,
I wanna confirm following are my accounting document entry kindly confirm if it is right.
CO.Code Itm PK SG Account Description Amount Curr.
2000 1 91 235199 Balance Upload Account 12.000,00- SAR
2000 2 86 411520 Price Difference Acc. 1 2.000,00 SAR
Can any one confirm me that my entries are correct or not??????????
Regards,
qsm sap
Edited by: qsm sap on Feb 12, 2008 7:41 AM

Hi,
For loading HALB or FERT items (Materials with Price Control S)
correct way is to run Standard Cost Estimate and then Upload the stock with Qty only , here system will take the Standard price from the material master,
In the a/c entries you have written it appears that Material is of "S" type and price is maintained as 0 (Zero) in master that's why all the Intial stock value has gone on to PRD account,
If you are not using standard Cost estimated (or not in a position to do that) but still have the correct stock qty and value with you, what you should do is :
Change the price control to "V"
Load the stock with qty and value, (system will calculate MAP and update the Material master),and there is no question of hitting PRD account
After all the Stock is uploaded for the material , change the Price Control to "S"
system will take the prevailing MAP at this instant as Standard Price for all future transactions

GR document and posting date issue for initial stock upload are overidden

Hi all
Loading initial stock into the system using standard idoc message type MBGMCR and basic type MBGMCR02.
We are trying to post the intial stock upload with posting and document dates in past with this idoc. The Idoc is accepted with these dates but while posting the system is overiding these dates and posting the document with system date. Any clue as to what is happening?
Regards,
Amit

Hi Jurgen
I am aware about the posting being possible till the last period.
But the system over-riding the posting and document dates in the IDoc even if I chose previos day's date in the current period. The dates in the IDoc are correct to be in the past. The IDoc is accepted by the system with the document and posting dates in the past.
But dates in the document after posting are system dates. Very unsual. Please let me know the reasons.
Thanks for the reply.
Cheers,
Amit

Stocks data is doubled for two Materials

Hi All,
I have 2 materials within a plant, and the closing stock for those materials has gone wrong (doubled in cube).
Fortunately, the correct data is available till my Integration layer DSO (DSO present very next below to the Cube).
so, my DSO data is matching with Source system's MB5B tx code.
since only in cube it is doubled, i thought of going for a selective deletion of these Materials to that specific period. and then selectively loading these materials into the cube again.
But Problem is when i go for selective deletion for the cube, I am not getting any Time Characteristics for selective deleition which is very much required for me. (like 0FISCPER, 0CALDAY are not available.)
Could anyone suggest me how to correct this scenario.
Regards
Dileepkumar Tatti

Dear Dileep
If you are sure that you have problem with only 2 materials, you can try loading a flat file or use the program CUBE_SAMPLE_CREATE to punch in the -ve values for the material which is doubled.
Regards
Gajesh

Importing spreadhseets from input forms for bulk uploads

Hi,
I believe you can export the results of a report / page to an excel spreadsheet, but can you import a spreadhseet for bulk upload from an input form ? The reason I am asking is we don't want to allow the users of the input form "developer" rights (i.e loading spreadsheets from SQL workshop), but we do want to allow them the ability to bulk populate tables from spreadsheets. Alternatively can you set the developer rights to only allow bulk uploads and nothing else ?
thank you
Tim

I'd like to know this too.
ta

Stock upload for bulk materials

Similar Messages

Maybe you are looking for