How to use a case ststement in interface?

how to use a case statement in interface?
My requirement is in interface for one column for
Eg: In source column if a.b=c.d then i need to write as "Source"
else when a.c=d.e then i need to write as "Target".
please can you help in solving this.
Regards,
Sridhar

You will literally write in the "Implemenation", the following:
Case when a.b=c.d then "Source"
Else
"Target"
End

Similar Messages

How to use the cases in button action?

Hi Experts,
I want to get a prompt message if the field is empty.I got it but at the same time if the field is filled I want the other action to be performed that is to call a BAPI and give me output.How can I give two events for the same action.
How to use the cases in button action?
So, please guide me.Urgent need
Regards
Nutan

Hi Nutan,
if I understand you, then you have a simple validation. Therefore you can use the validation functionality of VC for your components. An alternative could be by writing a new ABAP RFC function module like:
BAPI Input parameters as input and BAPI output parameters as output and an additional return code or string for a message:
IF I_FIELD IS INITIAL.
E_RETURN_CODE = "THE FIELD IS EMPTY."
ELSE.
CALL FUNCTION <YOUR_BAPI>
<BAPI PARAMETERS>
ENDIF.
I hope that helps.
Best Regards,
Marcel

How to use the CASE Expression in Where Cluase?

Hi All,
I'm trying to use the CASE Expression in the Where Clause at some trigger on the Form?
I've tried this Code:
Declare
N Number;
begin
SELECT COUNT(E.EMP_SID)
     INTO N
     FROM EMPLOYEES E, RANKS R
     WHERE CASE WHEN R.qualification_sid = 1104 AND E.rank_sid = 8 THEN
     (TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.spe_per)+1)
     ELSE
     (TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.mili_yea_per)+1)
     END
     BETWEEN TO_DATE('01-07-2011', 'DD-MM-RR') AND TO_DATE('31-07-2011', 'DD-MM-RR');
END;
When I run this code as a normal query at any SQL editor it works successfully, But When I Compile it at some trigger on the Form it gives me this error:
Encountered the symbol "CASE" when expecting one of the following:
( - + mod ......
Heeey how to specify the previous code to be shown as code in the thread?
Note: I'm using Forms 6i

OK I tried it and worked but for one condition:
WHERE DECODE (E.qualification_sid, 1104,
     (TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.spe_per)+1),
     (TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.mili_yea_per)+1))
     BETWEEN TO_DATE('01-07-2011', 'DD-MM-RR') AND TO_DATE('31-07-2011', 'DD-MM-RR')
But how to put two conditions for the same Expression:
WHERE DECODE ((E.qualification_sid, 1104) AND (E.RANK_SID, 8),
     (TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.spe_per)+1),
     (TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.mili_yea_per)+1))
     BETWEEN TO_DATE('01-07-2011', 'DD-MM-RR') AND TO_DATE('31-07-2011', 'DD-MM-RR')
The previous code gives me this error: missing right parenthesis

How to use third party usb 485 interface

I have a third party usb-485 interface that we frequently use within our company and want to be able to use Labview to create a program to talk to our systems. The interface is a kk systems usb-rs485 isolated converter which I have been able to recognise in MAX explorer after using the NI VISA driver wizard but I am unsure how to now use it for 485 comms within Labview. I don't seem to be able to detect it with the VISA configure serial port vi. I have used the NI usb-485 interface before and found this quite easy to set up but am not sure how to use this third party interface. I have attatched screen shots of the MAX window to show what it is seeing. Any help would be greatly appriciated.
Attachments:
MAX usb 485 screen shot.PNG ‏102 KB
MAX usb 485 screen shot2.PNG ‏120 KB

I have undone everything as recommended and the comm port does appear in the devices tree but when I try to use the device I don't seem to be able to get any response even though I can select the port as the VISA device name in my vi. I am pretty sure I have the baud rate etc.set the same as when we use the interface in other software,is there something else I need to do? I am using the rs485 example in labview as my code which works with the ni-usb485 we have.

How to use a case statement in where clause

Hi All,
I have a requirement which is to bring all the claims that are created in the last month.So, i wrote a query something like this
select * from claims
where
(Month(ClaimOpenDate) = Month(Getdate())-1 and year(claimopendate) = year(getDate()))
which would give me any new claims created in last month of current year, but this condition fails if we are in the first month of a new year( lets say if we are in 2016 jan then month(getdate())-1 would be 0 and year(getdate()) would be 2016 so we dont
find any records where year is 2016 and month is 0 for claimopen).
So, i would like to use a case statament or something which can help me get around this one.
Can someone please help me with any suggestions?
Thanks

Hi Jason,
Thanks a lot for your help. This is what exactly i am looking for but i just gave a sample query above below is my original query
select
row_number() over (order by [ClaimNumber]) as DataElementName
,c.PolicyNumber as PolicyNum
, c.FirstName as CustNameF
,c.LastName as CustNameL
,c.PolicyForm as PolType
,'Homesite' as Company
,[ClaimNumber] as ClaimNum
,E.office as Ofc
,e.Supervisior_FullName as Team
, RIGHT(e.adjuster_Name ,LEN(e.adjuster_Name)- charindex(',' ,e.adjuster_Name)) as FORepF
, case when charindex(',' ,e.adjuster_Name) <> 0 then left(e.adjuster_Name,charindex(',' ,e.adjuster_Name)-1) else e.adjuster_Name end as FORepL
,e.AdjusterID as RepC -- not sure
,CONVERT ( varchar,c.LossDate ,101) as DOL
,convert (varchar,c.ClaimOpenDate,101) as DOR
,rtrim(c.Loss_State) as LossSt
,c.Loss_ZipCode as LossZIP
,c.Loss_City as LossCity
,c.LossType as FOL
,'' as PR
,'' as PRNum
,1 as FeaNum
,'HO' as FeaType
,case when rtrim(c.claimStatus)= 'Closed' then 'Closed' else 'Open' end as FeaStat
,'' as FeaOpen
,'' as FeaClosed
,s.PaymentIndemnityAmount as PaidAmt
,s.ReserveIndemnityAmount as Reserve
,'' as Sub
,'' as Sal
,'' as FeatOwnOfc
,e.Supervisior_FullName as FeatOwnTeam
,RIGHT(e.adjuster_Name ,LEN(e.adjuster_Name)- charindex(',' ,e.adjuster_Name)) as FeatOwnRepF
,case when charindex(',' ,e.adjuster_Name) <> 0 then left(e.adjuster_Name,charindex(',' ,e.adjuster_Name)-1) else e.adjuster_Name end as FeatOwnRepL
,e.AdjusterID as FeatOwnRepCode
,NULL AS Description --not sure
from [Stg].[HS_DW_RV_Claims] c
inner join [dbo].[Claims_Primary_Adjuster] a on a.CLAIM_NUMBER = c.ClaimNumber
inner join [dbo].[vw_Adjuster] e on e.adjuster_Name = a.primary_ADJUSTER
left outer join [Stg].[HS_DW_LossClaimSummary] s on c.ClaimKey=s.ClaimKey
where c.LoadSource = 'CMS'
and
(s.PaymentIndemnityAmount <>0 or s.PaymentExpenseAmount <>0)
and
ClaimOpenDate BETWEEN DATEADD(mm, DATEDIFF(mm, 0, CURRENT_TIMESTAMP) -1, 0) AND DATEADD(mm, DATEDIFF(mm, 0, CURRENT_TIMESTAMP), 0)
UNION ALL
select
row_number() over (order by [ClaimNumber]) as DataElementName
,c.PolicyNumber as PolicyNum
, c.FirstName as CustNameF
,c.LastName as CustNameL
,c.PolicyForm as PolType
,'Homesite' as Company
,[ClaimNumber] as ClaimNum
,E.office as Ofc
,e.Supervisior_FullName as Team
, RIGHT(e.adjuster_Name ,LEN(e.adjuster_Name)- charindex(',' ,e.adjuster_Name)) as FORepF
, case when charindex(',' ,e.adjuster_Name) <> 0 then left(e.adjuster_Name,charindex(',' ,e.adjuster_Name)-1) else e.adjuster_Name end as FORepL
,e.AdjusterID as RepC -- not sure
,CONVERT ( varchar,c.LossDate ,101) as DOL
,convert (varchar,c.ClaimOpenDate,101) as DOR
,rtrim(c.Loss_State) as LossSt
,c.Loss_ZipCode as LossZIP
,c.Loss_City as LossCity
,c.LossType as FOL
,'' as PR
,'' as PRNum
,1 as FeaNum
,'HO' as FeaType
,case when rtrim(c.claimStatus)= 'Closed' then 'Closed' else 'Open' end as FeaStat
,'' as FeaOpen
,'' as FeaClosed
,s.PaymentIndemnityAmount as PaidAmt
,s.ReserveIndemnityAmount as Reserve
,'' as Sub
,'' as Sal
,'' as FeatOwnOfc
,e.Supervisior_FullName as FeatOwnTeam
,RIGHT(e.adjuster_Name ,LEN(e.adjuster_Name)- charindex(',' ,e.adjuster_Name)) as FeatOwnRepF
,case when charindex(',' ,e.adjuster_Name) <> 0 then left(e.adjuster_Name,charindex(',' ,e.adjuster_Name)-1) else e.adjuster_Name end as FeatOwnRepL
,e.AdjusterID as FeatOwnRepCode
,DESCRIPTION --not sure
from Stg.IG_Document D
inner join [Stg].[HS_DW_RV_Claims] c on D.PARENTREF = C.ClaimNumber
inner join [dbo].[Claims_Primary_Adjuster] a on a.CLAIM_NUMBER = c.ClaimNumber
inner join [dbo].[vw_Adjuster] e on e.adjuster_Name = a.primary_ADJUSTER
left outer join [Stg].[HS_DW_LossClaimSummary] s on c.ClaimKey=s.ClaimKey
where c.LoadSource = 'CMS'
and
DESCRIPTION like '%Denial Letter%'
and
ClaimOpenDate BETWEEN DATEADD(mm, DATEDIFF(mm, 0, CURRENT_TIMESTAMP) -1, 0) AND DATEADD(mm, DATEDIFF(mm, 0, CURRENT_TIMESTAMP), 0)
So if i use your logic in the end for both the where clauses its been more than 10 minutes and the query is still running however if i use my old method it doesnt even take a second. Looks like its affecting the execution plan. Any suggestions to get around
this one please?
Thanks

Idea about how-to using 'Agilent Wireless Test Manager' interfaces in Labview ?

Hello everyone,
I am not sure whether it is appropriate to post this here.
Currently I got a Wireless Test Manager CD(Agilent E6560A) and is trying to convert some functionalities inside class 'cdmaTXMeasTests' into labview.
I am doing the 'code domain power testing' module with labview, which is well done in that 'cdmaTXMeasTests'.
I am wondering if any one could provide me some idea how to use that 'cdmaTXMeasTests' in my labview without rebuild the wheel.
( I am not sure whether that would work, Are the libaries used by wireless test manager a ActiveXDLL that could be used by labview ? Or there is some other way to do it or not?)
Any idea is well appreciated,
+Kunsheng Chen

Good Afternoon Kunsheng Chen,
It seems like you are trying to port your DLL. Rather, I would suggest using a Call Library Function Node (right-click the Block Diagram, Functions>>Connectivity>>Libraries & Executables>>Call Library Function Node).
From the Agilent website, this is a C dll so you will be able to access it using this VI in LabVIEW with no problems. You might want to contact Agilent to see if this DLL has ActiveX components. Alternatively, you can simply browse the list of ActiveX components on your computer.
The following links may provide some useful information for using a DLL in LabVIEW.
An Overview of Accessing DLLs or Shared Libraries from LabVIEW
   http://zone.ni.com/devzone/cda/tut/p/id/3009
Call Library Function Node
   http://zone.ni.com/reference/en-XX/help/371361E-01/glang/call_library_function/
Using Existing C Code or a DLL in LabVIEW
   http://decibel.ni.com/content/docs/DOC-1690
Regards,
Charlie Piazza
Staff Product Support Engineer, RF
National Instruments

How to use a CAS in web dynpro with NWDS 7.0

Hi, all.
I implemented a cas project (some entity services and application services). Now I want to use it in a web dynpro project.
I know how to do that with NWDS 7.1, but it seems something differernt with NWDS 7.0.
Can anyone give me a hand? Thanks.

hi
CAF Core project comes with a sub-project WebDynpro.
You can implement business logic using CAF Core Service ,integrate it in WebDynpro UI.
1)Select your CAF project root , right click on it and select u201CCreate Web Dynpro Modelu201D from the context menu.
2) Switch to the Web Dynpro Perspective
3)You can find the CAF Core services have been generated and are available to the WebDynpro component.
you can find caf services under modelclasses of webdypro project .
4)Then you proceed with creating component etc..
Regards
sowmya.

How to use the Web Dynpro Component Interface

Hi, All
Error when processing your request
What has happened?
The URL http://erp2005.besuretech.com:8000/sap/bc/webdynpro/sap/zz_test5/ was not called due to an error.
Note
The following error text was processed in the system E05 : Error when Creating Component ZZ_TEST6. ZZ_TEST6 Is a Component Interface, Therefore, an Instance Cannot Be Created. Name of Component May Not Be Specified. (Used Component: ZZ_TEST5, Component Usage: MYCOMPUSAGE)
The error occurred on the application server erp2005_E05_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_COMPONENT_USAGE~CREATE_COMPONENT of program CL_WDR_COMPONENT_USAGE========CP
Method: RESOLVE_MAPPING of program CL_WDR_CONTEXT_NODE_INFO======CP
Method: MAP of program CL_WDR_CONTEXT_NODE_MAP=======CP
Method: MAP of program CL_WDR_CONTEXT_NODE_MAP=======CP
Method: IF_WD_CONTEXT_NODE~GET_ELEMENT of program CL_WDR_CONTEXT_NODE_MAP=======CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system E05 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server erp2005_E05_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server erp2005_E05_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 600 -u: LIPEI -l: E -s: E05 -i: erp2005_E05_00 -w: 0 -d: 20070120 -t: 212436 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
How can i do?
Thanks

Hi,
There is something wrong in the definition of component usage in your component. Maybe you forgot to instantiate the use component, maby the name you are using is not correct. Try to find it in that direction.
Good Luck,
Ben

How to use two lookup in single interface in ODI 11g

Hi All,
I am trying to load GL_CODE_COMBINATIONS CC + FND_FLEX_VALUES_VL FF to target table W_GL_CODE_COMBINATIONS.
I duplicated FND_FLEX_VALUES_VL as FND_FLEX_VALUES_VL1 FF1 for my join condition.
In target table I have included 2 new columns named SEGMENT2_DESC and SEGMENT3_DESC.
In my interface i am using FND_FLEX_VALUES_VL as lookup and join condition is CC.SEGMENT2=FF.FLEX_VALUE
Mapping expression of target column SEGMENT2_DESC is FF.DESCRIPTION.
In my interface i am using FND_FLEX_VALUES_VL1 as lookup and join condition is CC.SEGMENT3=FF1.FLEX_VALUE
Mapping expression of target column SEGMENT3_DESC is FF1.DESCRIPTION.
Execution of this interface taking more time. When using single lookup and SEGMENT2_DESC data loading is fast.
Kindly advice me regarding this.
Thanks in advance.

Are the number of records in lookup very large ?
Why cant you use the same lookup once and have the join containing both the conditions.
YOu dont have to use lookup at all. YOu can also drag the "so called" lookup table in the source and build the join conditions yourself.
The join condition would be
CC.SEGMENT2=FF.FLEX_VALUE and CC.SEGMENT3=FF.FLEX_VALUE

How to use upper case on screen panel

Wireless Password includes upper and lower case and can't find a shift button on screen panel OfficeJet Pro 8500

OK, so you are using the number keypad, right? Did you click on a button through the number, the three letters and then to the caps versions of those letters? Sorry I don't have an 8500 to play with.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How to use "full join" in ODI interface

I need to join two tables using full join. So, when I drag and drop table columns (build join) and mark left and right join (get full join):
+(All rows of OSS_NCELLREL (OSS_NCELLREL) including the rows unpaired with OSS_NECELASS (OSS_NECELASS) rows and all rows of OSS_NECELASS (OSS_NECELASS) incuding the rows unpaired with OSS_NCELLREL (OSS_NCELLREL)+
I get the following error:
Source panel of the diagram: Clause set to full join on a technology that does not support full joins
I use Oracle DB tables in the same DB.
Help! What I do wrong?

Hi,
You need to work around Topology Manager.
Please follow the below steps,
1. Edit the 'Oracle' technology from the Physical Architecture treeview.
2. In the Technology Defintion Tab select 'Ordered (Sql ISO)' radio button.
3. In the Technology 'SQL Tab' set the following:
- Clause Location: From
- Brackets supported in the ON clauses: check
- Inner: check, type INNER JOIN
- Cross: check, type CROSS JOIN
- Left Outer: check, type LEFT OUTER JOIN
- Right Outer: check, type RIGHT OUTER JOIN
- Full Outer: check, type FULL OUTER JOIN
PS: Please take a backup Oracle techno before editing. ;)
Thanks,
G
Edited by: Gurusank on Nov 27, 2008 9:05 PM

How to use a package as an interface for doing DML on a tabular region?

Hello,
I want to build a page to perform DML. However, I want to use a package containing the procedures for the select, insert, update and delete statements. The reason is that there is a one-to-many relationship between the table shown on the screen and the tables in the database.
When the page is first displayed, I want to call the SELECT procedure.
When the user is done with their changes, I want to loop through the rows and perform
the DELETE procedure on all the deleted rows and
the UPDATE procedure on each modified row.
What is the easiest way to do this?
Where do I start reading/learning?
Thanks,
Gabor

Hi Gabor,
If you base your Tabular Form on a database view, you can use an INSTEAD OF trigger to invoke your package. Have a look at this article, which describes this technique with some example code:
http://rokitta.blogspot.com/2009/12/tabular-forms-on-complex-views-using.html
regards,
Christian

How do I use the CASE statement in the where clause?

Hello Everyone,
I have 2 queries that do what I need to do but I am trying to learn how to use the CASE statement.
I have tried to combine these 2 into one query using a case statement but don't get the results I need.
Could use some help on how to use the case syntax to get the results needed.
thanks a lot
select segment_name,
product_type,
count (distinct account_id)
FROM NL_ACCT
where
ind = 'N'
and
EM_ind = 'N'
and product_type in ('TAX','PAY')
and acct_open_dt between (cast('2006-01-17' as date)) and (cast('2006-01-17' as date) + 60)
GROUP BY 1,2
order by product_type
select segment_name,
product_type,
count (distinct account_id)
FROM NL_ACCT
where
ind = 'N'
and
EM_ind = 'N'
and product_type not in ('TAX','PAY')
and acct_open_dt between (cast('2006-01-17' as date)) and (cast('2006-01-17' as date) + 30)
group by 1,2
order by product_type

Something like:
SELECT segment_name, product_type,
       SUM(CASE WHEN account_id IN ('TAX','PAY') and
                     acct_open_dt BETWEEN TO_DATE('2006-01-17', 'yyyy-mm-dd') and
                           TO_DATE('2006-01-17', 'yyyy-mm-dd') + 60 THEN 1
                ELSE 0 END) tax_pay,
       SUM(CASE WHEN account_id NOT IN ('TAX','PAY') and
                     acct_open_dt BETWEEN TO_DATE('2006-01-17', 'yyyy-mm-dd') and
                           TO_DATE('2006-01-17', 'yyyy-mm-dd') + 30 THEN 1
                ELSE 0 END) not_tax_pay
FROM NL_ACCT
WHERE ind = 'N' and
      em_ind = 'N' and
      acct_open_dt BETWEEN TO_DATE('2006-01-17', 'yyyy-mm-dd') and
                           TO_DATE('2006-01-17', 'yyyy-mm-dd') + 60
GROUP BY segment_name, product_type
ORDER BY product_typeNote: You cannor GROUP BY 1,2, you need to explicitly name the columns to group by.
HTH
John

How to use CASE or DECODE in this?

Hi , I have a query like this
AND ...smthng
AND --smtg
AND age BETWEEN ....For the last AND clause for age column, I have the values passed from IN param of this SP in form of strings
'0-30', '31-60', '61-90', and '91+'. The IN param is of course VARCHAR2.
What I want to do in this AND clause
e.g. for age range '0-30', the AND clause should be
AND age BETWEEN ( if this range is '0-30' then ) 0 AND 30 ( if range is '31-60') then BETWEEN 31 AND 60.. and so on...
However this BETWEEN will work till 61-90 range but for 91+ , there is no upper bound so it should be
AND age>91
Now , i am not sure how to achieve this both BETWEEN and '>' clauses in the same AND statement.
DECODE will not work and am not sure how to use the CASE in this situation as even that can not solve this issue.
Dont want to make the last AND clause dynamic
Please suggest me how to do this.
Thanks,
Aashish
Edited by: Aashish S. on Oct 21, 2011 6:01 PM

A third alternative would be to choose a suitably large value as a high end for the 91+ group and use something like:
age between to_number(CASE WHEN instr(:param, '+') = 0
                              THEN substr(:param, 1, instr(:param, '-') -1)
                              ELSE substr(:param, 1, instr(:param, '+') -1) end) and
            to_number(CASE WHEN instr(:param, '+') = 0
                           THEN substr(:param, instr(:param, '-') +1)
                           ELSE '9999' END)John

How to use Native SQL statement in JDBC receiver interface

Dear All,
Can any one please help us in using Native SQL statement in a JDBC receiver channel. The reason why I need to use Native SQL statement instead of standard XML structure is that I need to execute a dynamic SQL query in third party database system lke:-
Select Field1 Field2 from TABLE Where Field3 like "%Name'
I expect the the response in the form of XML file which I can pick up using synchornous interface as mentioned on help.sap.com:-
http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
The value for %Name can change dynamically according to the transaction and hence cannot be inluded as a KEY element in standard XLM structure,
Hence I need to know:-
1. What message mapping I should use in case if I have to use Native SQL statement.
2.What operation mapping I should use in case if I have to use Native SQL statement.
If guess correclty I may have to use Java mapping to do the above activities. Hence I want to know
3 .How do to go about it to do the Java mapping.
Thanks
Ameet

>
Ameet Deshpande wrote:
> Dear All,
>
> Can any one please help us in using Native SQL statement in a JDBC receiver channel. The reason why I need to use Native SQL statement instead of standard XML structure is that I need to execute a dynamic SQL query in third party database system lke:-
>
> "
> Select Field1 Field2 from TABLE Where Field3 like "%Name'
> "
> I expect the the response in the form of XML file which I can pick up using synchornous interface as mentioned on help.sap.com:-
>
> http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
> http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
>
> The value for %Name can change dynamically according to the transaction and hence cannot be inluded as a KEY element in standard XLM structure,
>
> Hence I need to know:-
>
> 1. What message mapping I should use in case if I have to use Native SQL statement.
> 2.What operation mapping I should use in case if I have to use Native SQL statement.
> If guess correclty I may have to use Java mapping to do the above activities. Hence I want to know
> 3 .How do to go about it to do the Java mapping.
>
> Thanks
> Ameet
You can use a stored procedure, and call it from jdbc receiver adapter.
I also solve this issue, with a DBLookup in message mapping. You can refer to my blog, and this usefull 3d:
http://simonlesflex.wordpress.com/2010/12/07/pi-oracle-dblookup/
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler

How to use a case ststement in interface?

Similar Messages

Maybe you are looking for