How to use upper case on screen panel
Wireless Password includes upper and lower case and can't find a shift button on screen panel OfficeJet Pro 8500
OK, so you are using the number keypad, right? Did you click on a button through the number, the three letters and then to the caps versions of those letters? Sorry I don't have an 8500 to play with.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Similar Messages
-
How to use a case ststement in interface?
how to use a case statement in interface?
My requirement is in interface for one column for
Eg: In source column if a.b=c.d then i need to write as "Source"
else when a.c=d.e then i need to write as "Target".
please can you help in solving this.
Regards,
SridharYou will literally write in the "Implemenation", the following:
Case when a.b=c.d then "Source"
Else
"Target"
End -
How to use the cases in button action?
Hi Experts,
I want to get a prompt message if the field is empty.I got it but at the same time if the field is filled I want the other action to be performed that is to call a BAPI and give me output.How can I give two events for the same action.
How to use the cases in button action?
So, please guide me.Urgent need
Regards
NutanHi Nutan,
if I understand you, then you have a simple validation. Therefore you can use the validation functionality of VC for your components. An alternative could be by writing a new ABAP RFC function module like:
BAPI Input parameters as input and BAPI output parameters as output and an additional return code or string for a message:
IF I_FIELD IS INITIAL.
E_RETURN_CODE = "THE FIELD IS EMPTY."
ELSE.
CALL FUNCTION <YOUR_BAPI>
<BAPI PARAMETERS>
ENDIF.
I hope that helps.
Best Regards,
Marcel -
How to use 'Find' menu in Screens
Hi all,
I wanted to know how to use 'Find' menu in screens.
Actually I have created a screen through SE51 and used the pushbutton to assign the function 'Find' ( one with binoculars ). The screen uses a table control to bring all the data from the DB table in the PBO module. When the user uses FIND button the system should prompt a search pop up screen onto which he will enter the search parameter and when he enter that the corresponding line item should be displayed on the tablecontrol. I wanted to know what logic should be incorporated in the program if that pushbutton is used. Please reply immediately. Its urgent.
Regards,
Bhavani.
Edited by: BHAVANI MADIREDDY on Apr 1, 2008 12:31 PMHello,
In the PAI under a module (user_command for example) when the user click the button you should use the command READ TABLE (if you look at the help, there's some options to do the READ dynamically - [http://help.sap.com/saphelp_nw04/helpdata/en/d3/2e974d35c511d1829f0000e829fbfe/frameset.htm]) to get the line index and with it you set the TOP_LINE of the table control ( tc_table-top_line = sy-index for example).
Doing this the selected line will be the first in the table control on the next step (PAI/PBO).
Regards, -
How to use the set full screen mode ?
hai...i' a newbie ..i hav one question ...how to use the set full screen mode for my application..
i found.
public void setfullscreenmode (boolean mode)
but when try in my application it error and other
canvas.setfullscreenmode(true);
actually i don't know where i should put this codei also found the coding it use like
setFullScreenMode (true);
but when i apply it ..it error because cannot resolve the symbol.
my question is which one i should use; declare the
public void setFullScreenMode (boolean mode);
first or use
setFullScreenMode (true) ;
or other way ..what i need to do to use setFullScreenMode -
How to use the CASE Expression in Where Cluase?
Hi All,
I'm trying to use the CASE Expression in the Where Clause at some trigger on the Form?
I've tried this Code:
Declare
N Number;
begin
SELECT COUNT(E.EMP_SID)
INTO N
FROM EMPLOYEES E, RANKS R
WHERE CASE WHEN R.qualification_sid = 1104 AND E.rank_sid = 8 THEN
(TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.spe_per)+1)
ELSE
(TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.mili_yea_per)+1)
END
BETWEEN TO_DATE('01-07-2011', 'DD-MM-RR') AND TO_DATE('31-07-2011', 'DD-MM-RR');
END;
When I run this code as a normal query at any SQL editor it works successfully, But When I Compile it at some trigger on the Form it gives me this error:
Encountered the symbol "CASE" when expecting one of the following:
( - + mod ......
Heeey how to specify the previous code to be shown as code in the thread?
Note: I'm using Forms 6iOK I tried it and worked but for one condition:
WHERE DECODE (E.qualification_sid, 1104,
(TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.spe_per)+1),
(TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.mili_yea_per)+1))
BETWEEN TO_DATE('01-07-2011', 'DD-MM-RR') AND TO_DATE('31-07-2011', 'DD-MM-RR')
But how to put two conditions for the same Expression:
WHERE DECODE ((E.qualification_sid, 1104) AND (E.RANK_SID, 8),
(TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.spe_per)+1),
(TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.mili_yea_per)+1))
BETWEEN TO_DATE('01-07-2011', 'DD-MM-RR') AND TO_DATE('31-07-2011', 'DD-MM-RR')
The previous code gives me this error: missing right parenthesis -
How to use a case statement in where clause
Hi All,
I have a requirement which is to bring all the claims that are created in the last month.So, i wrote a query something like this
select * from claims
where
(Month(ClaimOpenDate) = Month(Getdate())-1 and year(claimopendate) = year(getDate()))
which would give me any new claims created in last month of current year, but this condition fails if we are in the first month of a new year( lets say if we are in 2016 jan then month(getdate())-1 would be 0 and year(getdate()) would be 2016 so we dont
find any records where year is 2016 and month is 0 for claimopen).
So, i would like to use a case statament or something which can help me get around this one.
Can someone please help me with any suggestions?
ThanksHi Jason,
Thanks a lot for your help. This is what exactly i am looking for but i just gave a sample query above below is my original query
select
row_number() over (order by [ClaimNumber]) as DataElementName
,c.PolicyNumber as PolicyNum
, c.FirstName as CustNameF
,c.LastName as CustNameL
,c.PolicyForm as PolType
,'Homesite' as Company
,[ClaimNumber] as ClaimNum
,E.office as Ofc
,e.Supervisior_FullName as Team
, RIGHT(e.adjuster_Name ,LEN(e.adjuster_Name)- charindex(',' ,e.adjuster_Name)) as FORepF
, case when charindex(',' ,e.adjuster_Name) <> 0 then left(e.adjuster_Name,charindex(',' ,e.adjuster_Name)-1) else e.adjuster_Name end as FORepL
,e.AdjusterID as RepC -- not sure
,CONVERT ( varchar,c.LossDate ,101) as DOL
,convert (varchar,c.ClaimOpenDate,101) as DOR
,rtrim(c.Loss_State) as LossSt
,c.Loss_ZipCode as LossZIP
,c.Loss_City as LossCity
,c.LossType as FOL
,'' as PR
,'' as PRNum
,1 as FeaNum
,'HO' as FeaType
,case when rtrim(c.claimStatus)= 'Closed' then 'Closed' else 'Open' end as FeaStat
,'' as FeaOpen
,'' as FeaClosed
,s.PaymentIndemnityAmount as PaidAmt
,s.ReserveIndemnityAmount as Reserve
,'' as Sub
,'' as Sal
,'' as FeatOwnOfc
,e.Supervisior_FullName as FeatOwnTeam
,RIGHT(e.adjuster_Name ,LEN(e.adjuster_Name)- charindex(',' ,e.adjuster_Name)) as FeatOwnRepF
,case when charindex(',' ,e.adjuster_Name) <> 0 then left(e.adjuster_Name,charindex(',' ,e.adjuster_Name)-1) else e.adjuster_Name end as FeatOwnRepL
,e.AdjusterID as FeatOwnRepCode
,NULL AS Description --not sure
from [Stg].[HS_DW_RV_Claims] c
inner join [dbo].[Claims_Primary_Adjuster] a on a.CLAIM_NUMBER = c.ClaimNumber
inner join [dbo].[vw_Adjuster] e on e.adjuster_Name = a.primary_ADJUSTER
left outer join [Stg].[HS_DW_LossClaimSummary] s on c.ClaimKey=s.ClaimKey
where c.LoadSource = 'CMS'
and
(s.PaymentIndemnityAmount <>0 or s.PaymentExpenseAmount <>0)
and
ClaimOpenDate BETWEEN DATEADD(mm, DATEDIFF(mm, 0, CURRENT_TIMESTAMP) -1, 0) AND DATEADD(mm, DATEDIFF(mm, 0, CURRENT_TIMESTAMP), 0)
UNION ALL
select
row_number() over (order by [ClaimNumber]) as DataElementName
,c.PolicyNumber as PolicyNum
, c.FirstName as CustNameF
,c.LastName as CustNameL
,c.PolicyForm as PolType
,'Homesite' as Company
,[ClaimNumber] as ClaimNum
,E.office as Ofc
,e.Supervisior_FullName as Team
, RIGHT(e.adjuster_Name ,LEN(e.adjuster_Name)- charindex(',' ,e.adjuster_Name)) as FORepF
, case when charindex(',' ,e.adjuster_Name) <> 0 then left(e.adjuster_Name,charindex(',' ,e.adjuster_Name)-1) else e.adjuster_Name end as FORepL
,e.AdjusterID as RepC -- not sure
,CONVERT ( varchar,c.LossDate ,101) as DOL
,convert (varchar,c.ClaimOpenDate,101) as DOR
,rtrim(c.Loss_State) as LossSt
,c.Loss_ZipCode as LossZIP
,c.Loss_City as LossCity
,c.LossType as FOL
,'' as PR
,'' as PRNum
,1 as FeaNum
,'HO' as FeaType
,case when rtrim(c.claimStatus)= 'Closed' then 'Closed' else 'Open' end as FeaStat
,'' as FeaOpen
,'' as FeaClosed
,s.PaymentIndemnityAmount as PaidAmt
,s.ReserveIndemnityAmount as Reserve
,'' as Sub
,'' as Sal
,'' as FeatOwnOfc
,e.Supervisior_FullName as FeatOwnTeam
,RIGHT(e.adjuster_Name ,LEN(e.adjuster_Name)- charindex(',' ,e.adjuster_Name)) as FeatOwnRepF
,case when charindex(',' ,e.adjuster_Name) <> 0 then left(e.adjuster_Name,charindex(',' ,e.adjuster_Name)-1) else e.adjuster_Name end as FeatOwnRepL
,e.AdjusterID as FeatOwnRepCode
,DESCRIPTION --not sure
from Stg.IG_Document D
inner join [Stg].[HS_DW_RV_Claims] c on D.PARENTREF = C.ClaimNumber
inner join [dbo].[Claims_Primary_Adjuster] a on a.CLAIM_NUMBER = c.ClaimNumber
inner join [dbo].[vw_Adjuster] e on e.adjuster_Name = a.primary_ADJUSTER
left outer join [Stg].[HS_DW_LossClaimSummary] s on c.ClaimKey=s.ClaimKey
where c.LoadSource = 'CMS'
and
DESCRIPTION like '%Denial Letter%'
and
ClaimOpenDate BETWEEN DATEADD(mm, DATEDIFF(mm, 0, CURRENT_TIMESTAMP) -1, 0) AND DATEADD(mm, DATEDIFF(mm, 0, CURRENT_TIMESTAMP), 0)
So if i use your logic in the end for both the where clauses its been more than 10 minutes and the query is still running however if i use my old method it doesnt even take a second. Looks like its affecting the execution plan. Any suggestions to get around
this one please?
Thanks -
How to use a CAS in web dynpro with NWDS 7.0
Hi, all.
I implemented a cas project (some entity services and application services). Now I want to use it in a web dynpro project.
I know how to do that with NWDS 7.1, but it seems something differernt with NWDS 7.0.
Can anyone give me a hand? Thanks.hi
CAF Core project comes with a sub-project WebDynpro.
You can implement business logic using CAF Core Service ,integrate it in WebDynpro UI.
1)Select your CAF project root , right click on it and select u201CCreate Web Dynpro Modelu201D from the context menu.
2) Switch to the Web Dynpro Perspective
3)You can find the CAF Core services have been generated and are available to the WebDynpro component.
you can find caf services under modelclasses of webdypro project .
4)Then you proceed with creating component etc..
Regards
sowmya. -
How to use 'call funtions' in screens?
Hi all,
I am developing a screen through SE51 and have used a smart form to print out the data after it is saved. the smart form is called using CALL FUNCTION. I want to come back to the main screen after the smart form is executed. How can I do this? I have used LEAVE TO SCREEN 0 after the call function but it is not showing any effect. Please guide me.
Thanks in advance.
Regards,
Anu.Try to use : SET SCREEN 0.
This will get the processing to the previous screen,,
Check and let me know...
Regards
Shiva -
How to use a Dynamic Transaction Screen Variant
Hi,
I'm trying to use a standard variant (ZVA01) asociated to trx VA01.
I created this transaction variant in order to avoid changes of adresses's fields of the partners (bill to party) during the Sales Order creation.
I set as 'Only Display' this fields.
The problem we have is that, we also have 'One Time customers', in this case those blocked fields should be available to change its data during SO creation.
How can I change dynamically the transaction variant to be used in VA01 , based on
in the type of cliente (CPD or not CPD) ??
I have read that there exists a DYNAMIC TRANSACTION VARIANTs option, but I have not understood its way of use.
Could some body give me a link to this topic or explain it ?? .
Thanks ...
Regards
Tania MorenoTania,
I have never heard of 'DYNAMIC TRANSACTION VARIANT'. There does exist Dynamic date variables for Variants.
http://help.sap.com/saphelp_erp60/helpdata/en/c0/980398e58611d194cc00a0c94260a5/frameset.htm
I think you should probably use a userexit to achieve your business requirements. Perhaps USEREXIT_FIELD_MODIFICATION
within include MV45AFZZ.
Best Regards,
DB49 -
How to use mac's full screen functionality with Adobe acrobat XI?
I recently switched to mac, so font have much experience with this.
My adobe reader is missing mac's full screen functionality (the two arrows on right that make mac fullscreen).
so, if i have three pdfs open, i cannot switch between them using the 4 finger swipe..
Please note that this is different from the adobe functionality (command + L) which allows it to become fullscreen, but it still occupies the desktop and so, i cannot swipe between different pdfs.
Thank you!Nope that is just the way it is with Mac OS X and the way Apple has setup the dual screen system.
-
How to use iphoto album on screen saver
Upgraded to Mountian Lion, now my IMAC won't let me use my iphoto albums as desktop screen saver???
* Screen flow logic........
PROCESS BEFORE OUTPUT.
*MODULE PBO_MODULE.
PROCESS AFTER INPUT.
*MODULE PAI_MODULE.
PROCESS ON VALUE-REQUEST. "F4
FIELD EKPO-EBELP MODULE help_ekpo.
* populate screen field from within PROCESS ON VALUE-REQUEST(F4) call
*& Module help_responsibility INPUT
* text
MODULE help_ekpo INPUT.
**Transport values to table dynpro/screen table control
DATA: l_stepl LIKE sy-stepl,
l_indx LIKE sy-stepl.
DATA: dynpfields LIKE dynpread OCCURS 5 WITH HEADER LINE.
* Adjust for scroling within table control
CALL FUNCTION 'DYNP_GET_STEPL'
IMPORTING
povstepl = l_stepl
EXCEPTIONS
stepl_not_found = 0
OTHERS = 0.
l_indx = tc_ekpotable-top_line + l_stepl - 1.
"tc_ekpotable should already have been declared
REFRESH dynpfields.
CLEAR dynpfields.
dynpfields-fieldname = 'EKPO-EBELN'.
dynpfields-fieldvalue = '00010' "wa_ekpo-ebeln.
dynpfields-stepl = l_stepl.
APPEND dynpfields.
dynpfields-fieldname = 'EKPO-EBELP'.
dynpfields-fieldvalue = '00020' "wa_ekpo-ebelp.
dynpfields-stepl = l_stepl.
APPEND dynpfields.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = 'SAPLZZ_EKKO' "Program name
dynumb = '0100' "Screen number
TABLES
dynpfields = dynpfields
EXCEPTIONS
OTHERS = 0.
ENDMODULE. " help_ekpo INPUT -
How to get Upper cas eletter First letter and after spaceletter
Hi,
I have a string like 'rama rao'
i want out put like this 'Rama Rao'
First letter and after space first letter also need to come capital
Regards
Malli SHi,
Check the below Link.
http://www.sql-server-helper.com/functions/initcap.aspx
This function can handle Space, comma, or any character that appear in the middle of the string and just work fine.
CREATE FUNCTION [dbo].[InitCap] ( @InputString varchar(4000) )
RETURNS VARCHAR(4000)
AS
BEGIN
DECLARE @Index INT
DECLARE @Char CHAR(1)
DECLARE @PrevChar CHAR(1)
DECLARE @OutputString VARCHAR(255)
SET @OutputString = LOWER(@InputString)
SET @Index = 1
WHILE @Index <= LEN(@InputString)
BEGIN
SET @Char = SUBSTRING(@InputString, @Index, 1)
SET @PrevChar = CASE WHEN @Index = 1 THEN ' '
ELSE SUBSTRING(@InputString, @Index - 1,
1)
END
IF @PrevChar IN (' ', ';', ':', '!', '?', ',', '.', '_', '-', '/', '&', '''', '(')
BEGIN
IF @PrevChar != '''' OR UPPER(@Char) != 'S'
SET @OutputString = STUFF(@OutputString, @Index, 1, UPPER(@Char))
END
SET @Index = @Index + 1
END
RETURN @OutputString
END
GO
SELECT [dbo].[InitCap] ( ‘rama rao’ ) AS [Title]
Regards, PS -
How to use F4 help in screens(Process on Value-request) ?
Hi experts,
Can someone provide me some code which uses Process on Value-request in dialog programming? I have a requirement of entering a path on a modal dialog box that i have designed and i need to attach the f4_filename function module to it ?Please help...
Thanks in advance,
regards
Ashwin.Hi Ashwin,
Can use the function module HELP_VALUES_GET_NO_DD_NAME.
Here is the sample code that can help you using this for F4 help.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_field-low.
PERFORM F4_HELP.
*& Form F4_HELP
FORM F4_HELP .
CLEAR : I_FIELDS1,I_CONTENTS1.
REFRESH : I_FIELDS1,I_CONTENTS1.
I_FIELDS1-TABNAME = 'YHPA0TPROJ'.
I_FIELDS1-FIELDNAME = 'YHPPROJ'.
I_FIELDS1-SELECTFLAG = 'X'.
APPEND I_FIELDS1.
CLEAR I_FIELDS1.
I_FIELDS1-TABNAME = 'YHPA0TPROJ'.
I_FIELDS1-FIELDNAME = 'YHPPDES'.
I_FIELDS1-SELECTFLAG = ' '.
APPEND I_FIELDS1.
CLEAR I_FIELDS1.
SELECT YHPPROJ
YHPPDES
FROM YHPA0TPROJ
INTO TABLE I_CONTENTS1.
IF NOT I_CONTENTS1[] IS INITIAL.
CALL FUNCTION 'HELP_VALUES_GET_NO_DD_NAME'
EXPORTING
SELECTFIELD = 'YHPPROJ'
IMPORTING
IND = V_IND1
TABLES
FIELDS = I_FIELDS1
FULL_TABLE = I_CONTENTS1
EXCEPTIONS
FULL_TABLE_EMPTY = 1
NO_TABLESTRUCTURE_GIVEN = 2
NO_TABLEFIELDS_IN_DICTIONARY = 3
MORE_THEN_ONE_SELECTFIELD = 4
NO_SELECTFIELD = 5
OTHERS = 6.
IF SY-SUBRC EQ 0.
READ TABLE I_CONTENTS1 INDEX V_IND1.
P_PROJ = I_CONTENTS1-YHPPROJ.
P_YHPDES = I_CONTENTS1-YHPPDES.
ENDIF.
ELSE.
MESSAGE I000(YHPA0K) WITH 'No projects available'.
MESSAGE I519(YHPA0K). " No projects available
EXIT.
ENDIF.
ENDFORM.
Hope this helps you.
Regards,
Saumya -
When to use upper-case variable names?
What is recommended:
1. private static final int INITIAL_CAPACITY = 10000;
or
2. public static final int INITIAL_CAPACITY = 10000;
or
3. both (1 and 2).Get a copy of "The Elements of Java Style", and/or read the style guidelines available on this site.
You should follow naming and other style conventions. It makes your code easier to read and thus easier to maintain.
Maybe you are looking for
-
How do i select a different printer driver?
I have a Canon MP610 which since upgrading to Lion has been listed as a Generic Postscript Printer. This doesn't allow some of the functions I used to have in SL where Canon drivers were used. I've downloaded the lates drivers for the MP from Canon a
-
I had elements 10 on a laptop and want to install on my desktop. I downloaded the program and get a message that it cannot be installed, possibly due to missing files. It says to download Adobe Support Advisor to detect the problem. When I do, I get
-
How to run reports thru menu in 10g
Hi, I'm a junior oracle programmer and have already migrated forms 6i to 10g. Now I have to migrate the reports to 10g. I have read many documentations about running report from forms or menu, but the more I read, the more confused I get. Please note
-
How to throw an exception that is not treated as error
Hi, I have a repository manager displayed as /root/myrepository. Now when someone who's not authorized clicked it, I wish an error message will display on top in red, but not throw an exception as System Error. Now my implementation is to throw an Re
-
Hi, We have updated our SLD as per the note 669669, after that we have imported EPBUILDT into the MSS track after that all the tracks have become inconsistent and we see all the DC's as <b>broken</b> in CBS. Let us know if we have any procedure to re