How to use a hardwaresynth to controll a softsynth?

What I want is simple: I have a Yamaha CS1X Syntheziser with knobs that send MIDI Data. Now I want to use this Synth to controll my Minimoog Softsynth Plugin. Cutoff for example works already automatically. How do I configure logic so that the other knobs of my syntheziser controlls the rest of the Minimoog Plugin? I tried to find the answer in the manual, it must work over the setup controll assignement but it just doesnt work...
Thanks for any help!

You will literally write in the "Implemenation", the following:
Case when a.b=c.d then "Source"
Else
"Target"
End

Similar Messages

...how to use BATCHMAN transaction in Controlling?

...how to use BATCHMAN transaction in Controlling?...
need to upload statistical keyfigure values from an Excel file, but do not know which should be the header row on Excel file.
thank you.

To access the Transfer of External Data function (transaction BATCHMAN), choose:
Accounting ® Real Estate Management ® Controlling ® Actual Postings ® Transfer of External Data.
For further information please check the following link:
http://help.sap.com/saphelp_erp2005/helpdata/en/32/e7ee431feb6d45957a83e0179cbbff/frameset.htm
regards,
Lily

How to use Multiple Check Box control to make a list of items in check box

I have a use case where i have to save update list of items required, and i want to implement it through viewobject and use Multiple check box control, how do i go about it? Code snippet will be helpful........
Edited by: jDev_08 on Nov 17, 2012 8:31 PM

Hi,
Always mention your JDev version.
Check out the ADF Faces Demo : http://jdevadf.oracle.com/adf-richclient-demo/faces/components/index.jspx#%2Fcomponents%2FselectManyCheckbox.jspx (Hint : Code snippet is available in there itself).
-Arun

How to use HTML in JavaFX controls?

Does JavaFX support using HTML in JavaFX controls' text? For example, in Swing components:
button = new JButton("<html><center>Enable "
+ "middle button</html>");
If no, could we find a workaround?

Embedding a WebView in a Labeled for HTML Rendering
A WebView is a node which displays HTML.
Most controls implement Labeled, or have elements that are Labeled.
A Labeled has a setGraphic(node) method which allows you to set the graphic attached to the labeled to any given node (including a WebView).
For instance:
WebView webview = new WebView();
webview.getEngine().loadContent("<html><center>Enable middle button</html>");
webview.setPrefSize(150, 50);
Button buttonWithHTML = new Button("", webview);
should create a button with html in it (I didn't actually try running the above example).
Apart from the relatively slow startup time on first use and the overhead (which I can't quantify) of using WebView in this way, there are a couple of jira requests outstanding which make it a little bit of a nuisance.
RT-25004 Allow for transparent backgrounds in WebView
RT-25005 Automatic preferred sizing for WebView
You can vote for the above jira requests or comment on them if such functionality is important to you.
TextFlow/FXML/CSS Alternative
Rather than using html in the Labeled, support for the TextFlow control was introduced in Java 8, so that could be used instead.
TextFlow also works well with FXML and css if you prefer to have the stuff in the TextFlow managed via markup and a declarative styling language.
Open Feature Request
There is an open feature request RT-2160 HTML support for text which is currently scheduled for implementation in the initial Java 8 release. I think the likelihood of it actually being included there is zero percent, though it may be considered for a future release. You can vote for the issue or add comments to it, or provide an implementation if you are so inclined.
Implementation Considerations
A possible implementation would be something which parses the HTML then constructs a TextFlow the parsed HTML according to processing rules which are laid out in laborious mind-numbing detail in the HTML5 spec.
You could use a relaxed HTML parser such as the validator.nu parser (though there may be others which would be a better fit).
A simple implementation would just be to use the parser in the jdk which is used for the swing controls, but that is hopelessly outdated.
Perhaps, even simpler would to only accept strict html input and just use SAX to parse it out, though things like validator.nu are too difficult to work with.
Then, for the limited number of parsed tags that you want to support (and you really don't want to support all of HTML5 for something like this - otherwise you would just use WebView), create your TextFlow from the DOM model that your parser has created.
I wouldn't even both trying to handle most of the stuff in your html string in your implementation, stuff to do with styling, fonts, colors, etc. Those things were never any good in html anyway, and css is better for handling them, so just support stuff commonly used in usual modern day html (take a look at bootstrap html source as an example to see what that might be - if bootstrap doesn't use it, I don't think you should support it). The stuff you will be supporting are things around document structure like lists, headings, etc. div blocks and span nodes - so only implement that important stuff and delegate everything else to css where it belongs.
Also make sure your implementation fits in with FXML so that you can easily embed your html subset in an FXML doc.

How to used a JCR Data Control in Java class?

Hi,
I created a JCR Data Control to my UCM to obtain a treeTable with the datas. But it's impossible to create a treeTable like i want to.
So I know how to create a treeModel to obtain the treeTable I want.
Is there a way to used the getItems method of the dataControl in a Java Class?
I tried this :
BindingContext bc = (BindingContext)JSFUtils.resolveExpression("#{data}");
DCDataControl dc = bc.findDataControl("UcmDC");
But dc is null.
There are some xml files (UcmDC.xml or getItems_return.xml). Is it a way to resolve my problem. And if so, how do I use?
Best regards,
Thomas

please refer metalink id(305710.1)

How to use labjack U12 to control solenoid directional valve with Labview in hydraulic system

Hi,
I need to control a solenoid operated direactional valve in hydraulic system with Labjack U12. I am using three relays but need some help on the vi. like which instrument drive I need to use etc....
The coil voltage for the solenoid valve is : AC120V, 60Hz; AC110V, 50Hz
My goal is to control this solenoid valve open/close at certin time, am using Labview 2011. Any advise would be helpful.
Thank you!

Have you got the relays working yet. Do some initial testing with LJlogger to make sure hardware is controlling the relays as expected. If you need further help with this step, provide a link to electrical details for the relays and describe how you have the relays connected to the U12.
As for your programming in LabVIEW, I suspect you are using digital I/O, so the simplest thing to do is call EDigitalOut() to set a particular line to output-high or output-low, or if you need to set a line to input (for open-collector style control) use a call to EDigitalIn(). Perhaps look at "e function example.vi" to get started, and for general information about using the LabJack U12 with LabVIEW see topic #84 from the LabJack forums.

How to use the period in controls?

Hi,
I would like to use a control to validate my current opening balance amounts to the closing balance amounts from the final period in the prior year. However I cannot get it to work as I struggle to find what to enter in the period field for the control. I have tried DEC (PERIOD property in the time dimension) and 12 (MONTHNUM property in the time dimension) but in both cases BPC doesn't validate the control saying that neither value is valid.
Thanks,
Arnold

Hi,
You can try:
Year Offset=-1
Period=012
Regards,
Eran Goldfeld

How to use radiobutton in table control ?

I have four radio buttons in a row in table control. How to group radio buttons horizontally in a table control ?
Thanks in advance.

Hi
I already have radio buttons on table control. However when I run the program I am able to select all 4 radio buttons.
My need is, to select only one at a time. So how to group them??
thanks

How to use local variables in control files for loading data

i want to count the number of records which have odd number like...
Data in data.txt
1 a
2 b
3 c
So my count = 2, i will write this to another file.
Plz help me how to achieve this

If you want to extract some rows from a file and write them to another one, why do you need Oracle? What is your requirement?
Or are you asking out of curiosity how can this be done in Oracle?
You can create an external table for this input file, select the rows you want from it and write them to another file using utl_file.
External tables: http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/et_concepts.htm#SUTIL011
UTL_FILE: http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_file.htm#sthref14095

How to use apple mac remote control

Apple snow lepord had front row installed and the remote control would open the front row app after pressing menu button on the remote. , however lion doesnt have that and the menu key doesn't do anything.. can i set the remote in such a way that it opens itunes ?

google it... or search in here there are a couple places that cover how to do it.

How to use PID function to control a DC motor? ?

Hi everyone,
I wanna control a 6v DC motor using PID control toolkit 8.2.
- a close loop control system with an encoder sensor
- using a DAQ card model: NI USB-6008
- the DAQ card will be able to output pwm signal to the transistor then to my motor
Im stuck at getting pwm signal from the pid.vi and i wanted to know what is the process variable (PV)
pls help me on my problem, if can pls make an example VI for me
Thanks !

Duplicate Post

JClient - How to use multiple interacting JComboBox controls?

Hi there,
I would like to use 2 or more combobox controls that interact with each other, there data is master detail (detail...). When the master is selected the detail gets filtered. Also it would be nice if the master is null that all detail items would be shown and when detail is selected the master would be set accordingly.
For an example think of an address with the combination of country - state - city.
Country
â¢ State
  o City
USA
â¢NY
  o ALBANY
  o BROOKLYN
  o BUFFALO
  o NEW YORK CITY
  o QUEENS
â¢ PA
  o ALLENTOWN
  o PHILADELPHIA
  o PITTSBURGH
â¢ NJ
  o ATLANTIC CITY
  o JERSEY CITY
  o TRENTON
  o NEWARK
â¢ FL
  o ORLANDO
  o ST. PETERSBURG
  o TAMPA
  o MIAMI
  o DAYTONA BEACH
CANADA
â¢ ONTARIO
  o AJAX
  o TORONTO
â¢ NOVA SCOTIA
  o HALIFAX
â¢ BRITISH COLUMBIA
  o VANCOUVER
  o RICHMOND
When USA is selected in the country combobox, only its states are shown in the state combobox, then when NY is selected in the state combobox only its city's are shown in the city combobox.
If possible as a bonus it would be nice to be able to select any state when country is null and any city when both country and state are null (not selected). And when selected the parent's would be set.
Example if country and state are not selected and MIAMI is selected as the city then state would be set to FL and country to USA automatically. This would be nice to have but not necessary.
Only the filtering part is really needed. When country is first selected and that filters state, followed be selection of state that filters city's.
Thank you in advance
James

Found a previus post about the same topic in UIX
Master-Detail Pulldown-Menu's With PPR
Going to try using Navigation List and see what happens.

How to use the mobile phone control computer?

Using iPhone5 remote control computer, what software? TKS!!!

Hi Or,
Using
Launcher class is fine (not sure if you are playing with 8.1 Silverlight or runtime), you can launcher default system app by following code:
var success = await Windows.System.Launcher.LaunchFileAsync(file);
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to use ActiveX-Microsoft Calender Control as a way to schedule time (e.g., and online sign up calender or day planner

I operate a user facility for several testing instruments. I am looking for a Lavbiew VI that will allow user to reserve time on the instruments. I did a search and found the ActiveX Microsfot Calender Control. This will display a calender and allow you to choose the month, year and date. I would like to place a control on the front panel that will allow the user to select the date, be prompted to tpye in the time to reserve ( e.g., 1:00pm to 4:00pm) and have it display on date on the calendar front panel. Is this possible? Thanks.

OK, so everybody has forgiven everybody -- I guess.
I any case, you aren't going to find one control that does everything. What you need to do, for the data input portion at least, is create a VI that to the operator looks and operates like a dialog box. There are some examples that show in general how to do that. My recommendation is to play with one of those examples until you understand the principles involved and then start modifying it to collect from the user the data that your application needs.
Mike...
PS: as you work through this challenge feel free to ask lots and lots of specific questions.
PPS: going to be at NIWeek?
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How to use LabView to control Primera Bravo II CD burner?

I am trying to use LabView to control the Primera Bravo II CD burner and label printer. The software that controls the Bravo II is PTPublisher. How to use LabView to communicate/control the PTPublisher? Please help, Thanks

Hi Qian,
I installed PTPublisher on a virtual machine, and I was wondering what kind of tasks you wanted to control within LabVIEW. From the program GUI, it appears like the only way to access functions is via mouse clicks. Do you know of any other way to control the Bravo II CD burner besides the PTPublisher software? If not, does the PTPublisher allow you to control it in some way other than clicking?
Peter K.
National Instruments

How to use a hardwaresynth to controll a softsynth?

Similar Messages

Maybe you are looking for