How to use a ipad with out putting in the linked apple id in it

.

You will never be able to use this iPad.
This article explains:
Find My iPhone Activation Lock - Apple Support

Similar Messages

  • How to use NODIM func with out it's values being rounded

    I created a new calculated key figure in Query Designer 3.x, and used the function NODIM() - Value with out dimensions. When I use this function, the values are rounding off to the nearest value.
    For example, I have a value 0.000075 US$, when I use NODIM function the value is displayed as 0.000080. Value is getting rounded to nearest value.
    I tried using absolute value it did not work.
    Can any one tell me how to use NODIM function with out it's value being rounded to nearest value.
    Thanks,

    Hi,
    According to your description, you might want that "Notice" field has a default value when form is created and users can be able to change the value of that
    field.
    As a workaround, you can add an action rule in “Name” field via InfoPath to fill the default value in “Notice” field only when “Name” field is not blank and “Notice”
    field is blank.
    Settings of the rule are as below, you can modify it based on your need:
    Here is a link about how to add an action rule in InfoPath form, you can use it as a reference:
    https://support.office.microsoft.com/en-us/article/Add-rules-for-performing-other-actions-5322d726-b787-4e5f-8d37-ba6db68b451d?CorrelationId=8a64c12f-aa60-4d90-b1f9-a44fcc4e74b5&ui=en-US&rs=en-US&ad=US
    Best regards
    Patrick Liang
    TechNet Community Support

  • Can I use an iPad with 3G purchased in the USA in Brazil?

    Can I use an iPad with 3G purchased in the USA in Brazil? The Apple iPad sold in the USA is configured to be used with the cellular networks operated by Verizon and AT&T. What I am wondering is whether either of those networks can work with the cellular companies that operate in Brazil? Does anyone know?
    Thanks
    Luis

    No if the iPad was purchased for Verizon's network which is a CDMA network. The iPad for Verizon's network does not have a SIM card slot.
    Yes if the iPad was purchased for ATT's network which includes a SIM card slot. The GSM iPad sold in the U.S. is not sold as carrier locked.

  • How. Do I get free apps on my iPad with out putting in  credit card info?

    Iam trying to get free apps without putting in a credit card how do I that please help!

    You can set up an account with the payment type of None.  If the current Apple ID you want to use was created more than 48 hours ago, you won't be able to change the payment type to None and will need to either create a new Apple ID account (using an previously unused email address) or provide a valid payment method to the account such as a credit/debit card or iTunes gift card.
    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
    B-rock

  • HT2508 how to use my ipad with my mac book pro

    trying to interface with iPad using my MacBook pro. Having issues

    Mirrioring ??
    iOS: How to use AirPlay Mirroring
    Troubleshooting AirPlay and AirPlay Mirroring

  • How to use i cloude with out wifi

    How to use icloude with out wifi. I never backed my contacts up in iclode, and now my wifi does not work.

    icloud is on the internet to be able to use it one have to have an Internet connection over wifi or over 3g

  • How to use Read table with out key fields

    Hi Experts,
    I need to retrieve the 2 internal tables data into single table.
    I have 3 common fields between the 2 tables but I don't have the Key fields. Then how to use the read table in this.
    Thanks in Advance.
    Edited by: satish4abap on Mar 10, 2010 9:39 AM

    Hi Satish,
    Key fields are nothing but the common fields with which you can pick the data from the second internal table.
    If you can paste your Internal table fields then we will be able to assit you better.
    However, in genral scenarios you can use it as below :
    In this scenario, we are putting data from 3 internal table to another single internal table.
    LOOP AT T_PRGEN INTO WA_PRGEN.
           WA_FINAL-GUID_PR       = WA_PRGEN-GUID_PR.
           WA_FINAL-ATTR20A       = WA_PRGEN-ATTR20A.
           WA_FINAL-ATTR05A       = WA_PRGEN-ATTR05A.
           WA_FINAL-ATTR05B       = WA_PRGEN-ATTR05B.
           WA_FINAL-ATTR05C       = WA_PRGEN-ATTR05C. " + DG1K902190
           WA_FINAL-ATTR10A       = WA_PRGEN-ATTR10A.
        READ TABLE T_V_TCAV201 INTO WA_V_TCAV201 WITH KEY ATTRV20 = WA_PRGEN-ATTR20A BINARY SEARCH.
        IF SY-SUBRC = 0.
          WA_FINAL-TEXT1   = WA_V_TCAV201-TEXT1.    "SUBID-TEXT1
        ENDIF.
        READ TABLE T_PNTPR INTO WA_PNTPR WITH KEY GUID_PR = WA_PRGEN-GUID_PR BINARY SEARCH.
        IF SY-SUBRC = 0.
           WA_FINAL-PRVSY  = WA_PNTPR-PRVSY.   "PROD NO
           WA_FINAL-GRVSY  = WA_PNTPR-GRVSY.   "LOGICAL SYS GROUP
        ENDIF.
      append wa_final to t_final.
    endloop.

  • How to use two ipads with icloud on one computer

    Can you use two iPads on one computer with  iCloud so that they are still separate?

    setup a different user on the computer and make sure it has ADMIN rights Start>control panel>user accounts>manage accounts>Create new user, check the box for admin on a windows computer
    and on a mack >system pref>user and Grps>+ for a new user and still make sure it has admin rights

  • How I use 2 AI with 1 AO in the same program without hardware errors?

    I have a machine with a Motor (velocity controled with PWM), a Strain Gauge, and a Encoder (inner the motor). This machine is controled with a LabVIEW 6.1 program in a computer with Intel Celeron 1.5Gb 360 Mb RAM and DAQ 6024E.
    In my program I have two AI Adquisition Waveform blocks with AI different ranged Channel (the firts in my Strain Gauge ranged -9 to +9 V) and the second in my encoder ranged 0 to +5 V), and one AO Generate Waveform (the PWM signal ranged 0 to +5 V). When I put on the program, the motor Glitches an my computer turns slow. It´s cause me problems!
    Whats the problem?

    You would probably get more info on this in the DAQ Discussion Forums, but I can help you out a bit here. The VIs that you are using are very high level VIs so there is a lot going on behind the scenes that you do not see. More importantly, they are synchronous, meaning that you have to wait until they're finished to do anything else. This is probably why your computer is slowing down. The UI may even freeze until you have acquired all the points you requested. I would suggest using the more advanced DAQ VIs to control your system. There are many examples that ship with LabVIEW which demonstrate how to use these. They allow you to build an asynchronous acquisition system so that other tasks may operate while the DAQ board is acquiring data.
    J.R. Allen

  • My iphone 4s got water in the headphone port. I put my phone in rice for 24 hours and the LED light is on. It stays on even when the phone is off. How can I fix it with out spending 200 bucks at apple to have them fix it?

    My iphone 4s got water in the headphone poert. I put my phone in rice for 24 hours and the LED is on. It stays on even when the phone is off. How can i fix it without taking it to apple and spendding 200 dollars to have them fix it?

    Short answer is you probably cannot.  Once water gets inside the device and it is powered on, the damage likely is permanant. 

  • HT2731 Ok I just reset my password but I can't seen to sign in because I don't have a credit card and I am only 17 so is there a way that I can sign in and my account be used in iTunes with out putting billing info?

    Ok I just got my new password but can't be recognize by apple and I don't have a credit card or billing info I am just 17

    Hi,
    Which website your are using to update the Adobe Flash player? No Adobe website ever ask for any id and password to update the flash player.
    If you are using MAC machine and its the password prompt while installing update that you are talking about then please follow What userid & password do I need to install Flash Player?
    -Varun

  • How to use AttributeHierarchyOptimizedState property with Primary Key of the Dimension?

    I'm reading the article about increasing SSAS performance. http://www.mssqltips.com/sqlservertip/2567/ssas--best-practices-and-performance-optimization--part-3-of-4/
    I would like to increase processing performance of Customer Dimension with CustomerID as the primary key. It is a good practice to set AttributeHierarchyOptimizedState to NotOptimized to CustomerID attribute. What are the implications to the query
    performance?
    Please advise.

    Hi,
       Since the CustomerID is the primary key (surrogate key) and the usual practice is to hide the surrogate keys in client tools. It is the best practice to set the AttributeHierarchyOptimizedState to NotOptimized to CustomerID attribute. As specified
    in the article SSAS will not create Bitmap indexes on top of that attribute and it saves a lot of processing time and decreases the cube size.
    Regards,
    Venkata Koppula

  • I am using an iPad with Apple TV and airplay with a projector in my classroom.  The mirroring cuts out and back on several times during use. Any suggestions on what's causing it and how to fix it?

    I am using My iPad with Apple TV, Airplay and projector in my classroom.  The projector screens blanks out and back on several times during a presentation. It seems like a problem with connection but I'm not sure as it comes back on after a few seconds. Any idea of what is causing this and how it can fixed?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
     Cheers, Tom

  • I have like five GB's of ghost data (data the device claims is not there but it is still taking up space) on my I pad 2 from a failed movie download attempt. How do I fix that with out resting my iPad? I have only 1GB left of storage

    I have like five GB's of ghost data (data the device claims is not there but it is still taking up space) on my I pad 2 from a failed movie download attempt. How do I fix that with out resting my iPad? I have only 1GB left of storage
    The movie had gotten to the point that I could watch it all the way through but it still said processing and got stuck at that point and when I turned off the wifi to try to restart it, it deleted its-self but did not free up any of the storage It was taking up
    Restarting my iPad does not help
    Some thing similar also happened to my old laptop when trying to download the iOS 5 update to my laptop when it came out. It kept getting disconnected and every time it would try to start over and act like what had already been downloaded was not there though it was still taking up the storage space.
    And it continued repeating until it took up all of my storage space. The data file would not show up anywhere so I had to restore my laptop to the factory settings and that worked for awhile but I eventually had to get a new laptop.

    Did you try to set it up as new device, as explained in this article?
    How to erase your iOS device and then set it up as a new device or restore it from backups
    If this does not work, use iTunes to set it back to factory settings, which would also install the latest software:
    Use iTunes to restore your iOS device to factory settings - Apple Support

  • How can I use an iPad with two itunes accounts?

    How can I use an iPad with two itunes accounts?
    Hi there
    My partner has a works iPad, which has her works Apps on (ones that are specifically made by her company and are NOT available in the App store).
    What I want to be able to do is to ALSO have my itunes account on there so that I can put all the apps I have purchased previously from my iPhone on it.
    This is so I can put on VLC player (thats already in my itunes account) so I can add videos to the iPad.
    How do I do this please?
    I tried it before by connecting it to my mac, but it wiped everything off the iPad completely and also deleted the data settings for using 3G.
    So I want to avoid this happening again the future as it had to be sent back to her head office to be sorted again.
    Any advise please?
    Thanks

    You can't. The iPad is desgined to be a 'one user' device and only really works with one apple ID at a time.
    The only way would be if she, at work and with her work apple id, downloaded your apps (repurchasing them of course).
    It's not meant to be a multiple user/multiple ID device.

Maybe you are looking for