How to use BAPI_ASSET_RETIREMENT_POST(error)

i am a abaper.
when i use BAPI_ASSET_RETIREMENT_POST to retire An asset,there is an error
message: 'Internal error: Line items were not created for the document'.
the error message is the promble of the system configure?
please help me ! thanks .
the report:
DATA : GENERAL LIKE BAPIFAPO_GEN_INFO,
       RETIREMENT LIKE BAPIFAPO_RET,
       DOCUMENTREFERENCE LIKE BAPIFAPO_DOC_REF,
       RETURN LIKE BAPIRET2.
GENERAL-DOC_DATE = '19991201'.
GENERAL-PSTNG_DATE = '19991201'.
GENERAL-COMP_CODE = '011'.
GENERAL-ASSETMAINO = '000000391866'.
GENERAL-ASSETSUBNO = '0000'.
RETIREMENT-REV_ON_RET = '300'.
RETIREMENT-VALUEDATE = '19991201'.
CALL FUNCTION 'BAPI_ASSET_RETIREMENT_POST'
EXPORTING
ORIGINDOCREFERENCE       =
    GENERALPOSTINGDATA       = GENERAL
   RETIREMENTDATA           = RETIREMENT
ACCOUNTASSIGNMENTS       =
FURTHERPOSTINGDATA       =
IMPORTING
   DOCUMENTREFERENCE        = DOCUMENTREFERENCE
   RETURN                   = RETURN
IF RETURN-TYPE <> 'E' or RETURN-TYPE <> 'A' .
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
       EXPORTING
         WAIT          = 'X' .
WRITE :/ RETURN-MESSAGE.
ELSE.
WRITE :/ RETURN-MESSAGE.
ENDIF.

Hi Lee,
Welcome to SDN
Have you checked with your FI consultant regarding the data. Is the data correct?
Have you tried this directly?
Regards,
Atish

Similar Messages

JNI - How to use the error reporting mechanism?

I've developed a C++ DLL which is loaded from a commercial Win32 application (not written by me) as a plug-in for external calculations. On its initialization the C++ DLL launches the Java VM via the JNI invocation interface. When the DLL functions are called by the application, they forward the calls to Java objects inside the Java VM, again via JNI invocation interface.
This works well, but I have encountered a weird error.
From Java I open a JFrame containing a JTextArea as small console for debug output messages. If I turn output to this debug console off (my printToConsole routine checks whether a boolean flag is set), the string concatenation operator may lead to a crash of the Java VM.
For example, if in one of the Java functions called from the
DLL via JNI invocation interface the following is the first statement,
it leads to a crash of the Java VM and the application that loaded the C++ proxy DLL.
String test=""+Math.random(); // String test not used later
Interestingly, if I comment this statement out, the Java code works fine WITHOUT any crash. I've already thought about potential races and synchronization issues in my code, but I don't see where this is the case. And the string concatenation error fails as well, if I insert sleep() statements in front of it and at other places in the code. However, if I turn on log messages printed to my JFrame debug console (containing a JTextArea), the String concatenation works without problems.
So maybe the JNI interface has a bug and affects the Java VM; I don't see where my JNI code is wrong.
One problem is that I do not get any stdout output, as the C++ proxy DLL is loaded by the Windows application, even if I start the Windows application from the DOS command line (under Windows).
Does anyone know how to use the error reporting mechanism?
http://java.sun.com/j2se/1.4.2/docs/guide/vm/error-handling.html
Is it possible that the JVM, when it crashes, writes debug information about the crash into a file instead of stdout/stderr?
My C++ proxy DLL was compiled in debug mode, but the commercial application (which loaded the DLL) is very likely not.
I do not know hot to find the reason why the String concatenation fails inside the Java function called from the C++ DLL via JNI.

Yes, I've initially thought about errors in the C++ code too. But the C++ code is actually very simple and short. It doesn't allocate anything on the C++ side. It allocates a couple of ByteBuffers inside the Java VM however via JNI invocation interface calls of env->NewDirectByteBuffer(). The native memory regions accessed via the ByteBuffers are allocated not by my own C++ code, but by the program that calls my DLL (the program is Metastock).
The interesting thing is that everything works fine if output to my debug console is enabled, which means that in the Java print routine getConsoleLoggingState() returns true and text is appended to the jTextArea.
static synchronized void print(String str)
{ MetaStockMonitor mMon=getInstance();
if ( mMon.getFileLoggingState() && mMon.logFileWriter!=null) {
mMon.logFileWriter.print(str);
mMon.logFileWriter.flush();
if ( mMon.getConsoleLoggingState() ) {
mMon.jTextArea1.append(str);
Only if output to the JTextArea is turned off (ie. getConsoleLoggingState()==false), the crash happens when the FIRST statement in the Java routine called via JNI invocation interface is a (useless) String concatenation operation, as described above.
String test=""+Math.random(); // String test not used later
Moreover, the crash happens BEFORE the allocated ByteBuffer objects are accessed in the Java code. But again, if console output is turned on, it works stable. If console output is turned off, it works when the (useless) String concatenation operation is removed in the Java routine called from C++.
I've already thought about potential races (regarding multiple threads), but this can be ruled out in my case. It almost appears as if the JVM can have problems when called by the invocation interface (I tested it with Java 1.4.2 b28).
All the calls between C++ and Java go ALWAYS in the direction from C++ code to Java. Unfortunately, there is no special JRE version with extensive logging capabilities to facilitate debugging. And the problem is not easily reproducible either.
JNIEnv* JNI_GetEnv()
JNIEnv *env;
cached_jvm->AttachCurrentThread((void**)&env,NULL);
fprintf(logfile,"env=%i\n",env);
fflush(logfile);
return env;
// function called by Metastock's MSX plug-in interface
BOOL __stdcall createIndEngine (const MSXDataRec *a_psDataRec,
const MSXDataInfoRecArgsArray *a_psDataInfoArgs,
const MSXNumericArgsArray *a_psNumericArgs,
const MSXStringArgsArray *a_psStringArgs,
const MSXCustomArgsArray *a_psCustomArgs,
MSXResultRec *a_psResultRec)
a_psResultRec->psResultArray->iFirstValid=0;
a_psResultRec->psResultArray->iLastValid=-1;
jthrowable ex;
jmethodID mid;
JNIEnv* env=JNI_GetEnv();
jobject chart=getChart(env, a_psDataRec);
if ( chart==NULL) {
return MSX_ERROR;
jobject getChart (JNIEnv* env, const MSXDataRec *a_psDataRec)
jthrowable ex;
jmethodID mid;
int closeFirstValid, closeLastValid;
closeFirstValid=a_psDataRec->sClose.iFirstValid;
closeLastValid=a_psDataRec->sClose.iLastValid;
long firstDate, firstTime;
if (closeFirstValid>=1 && closeFirstValid<=closeLastValid) {
firstDate = a_psDataRec->psDate[closeFirstValid].lDate;
firstTime = a_psDataRec->psDate[closeFirstValid].lTime;
} else {
firstDate=0;
firstTime=0;
jclass chartFactoryClass = env->FindClass("wschwendt/metastock/msx/ChartFactory");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find class ChartFactory\n");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetStaticMethodID(chartFactoryClass, "getInstance", "()Lwschwendt/metastock/msx/ChartFactory;");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getInstance()\n");
printSBufViaJava(sbuf);
return NULL;
jobject chartFactory=env->CallStaticObjectMethod(chartFactoryClass, mid);
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getInstance()");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetMethodID(chartFactoryClass, "getChartID", "(Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;IIIIIII)F");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getChartID()\n");
printSBufViaJava(sbuf);
return NULL;
jobject symbolBuf=env->NewDirectByteBuffer(a_psDataRec->pszSymbol, strlen(a_psDataRec->pszSymbol) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate symbolBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityNameBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityName, strlen(a_psDataRec->pszSecurityName) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityNameBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityPathBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityPath, strlen(a_psDataRec->pszSecurityPath) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityPathBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityOnlineSourceBuf=env->NewDirectByteBuffer(a_psDataRec->pszOnlineSource, strlen(a_psDataRec->pszOnlineSource) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate onlineSourceBuf\n");
printSBufViaJava(sbuf);
return NULL;
// Java Function call leads to crash, if console output is turned off and
// the first statement in the Java routine is a (useless) string concatenation.
// Otherwise it works stable.
jfloat chartID=env->CallFloatMethod(chartFactory, mid, securityNameBuf, symbolBuf,
securityPathBuf, securityOnlineSourceBuf, (jint)(a_psDataRec->iPeriod),
(jint)(a_psDataRec->iInterval), (jint)(a_psDataRec->iStartTime),
(jint)(a_psDataRec->iEndTime), (jint)(a_psDataRec->iSymbolType),
(jint)firstDate, (jint)firstTime );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getChartID()");
printSBufViaJava(sbuf);
return NULL;

How to use Tools Error Console

I was recently trying to troubleshoot a problem of access a secure bank site [SSL problem] and trying to use the error console to figure out what was wrong. It makes little sense to a common end user of Java such as myself.
What does one do with the information in the catagories and what are the Code and Evaluate buttons use? What are you supposed to enter into the 'address' box or whatever it is??
Is the error console just for web page designers or what?

Dianna,
The Error Console isn't intended for the average user. It is mainly used by webpage and program developers for troubleshooting their work. I wish Mozilla would just remove it from Firefox and offer it as an extension for the few number of users who really need it; like Mozilla did with the DOM Inspector a couple of years ago.

How can I resolve error code -54 in iTunes? I am using the latest iTunes. No new updates are available.

How can I resolve error code -54 in iTunes? I am using the latest iTunes. No new updates are available. I'm using iTunes 11.3 on a MacBook Pro, OS X 10.6.8. I can't save my library in iTunes, the message just keeps popping up.

From an OS9 reference, error -54 is a software lock on a file or a permissions error. (Although there is no formal list of OSX error code some of the old codes still apply to OSX .)
First, try simply restarting your computer.
Try quitting iTunes, then deleting the .xml (not .itl !) version of the library file in the iTunes folder (iTunes will generate a new one).
iTunes Library cannot be saved (Error -54) - https://discussions.apple.com/thread/1912814 - various things to try.
Unknown error (-54) while syncing ipod - https://discussions.apple.com/thread/1082953 - problem was locked files
Why does iTunes keep showing a -54 error when I sync my iPad? - https://discussions.apple.com/thread/3727114
Error -54 possibly related to Touch Copy - https://discussions.apple.com/thread/3727114 - cleared by deleting preferences on iPad.
iTunes: Missing folder or incorrect permissions may prevent authorization - http://support.apple.com/kb/ts1277
Troubleshooting permissions issues in Mac OS X - http://support.apple.com/kb/HT2963

How do I override "error code -61" when attempting to put things in the Trash? Cannot empty Trash or use Secure Empty Trash.

How do I override "error code -61" when attempting to put items in the Trash? Cannot empty Trash or use Secure Empty Trash. I have a MacBook OS X 10.5.8

The reason why some of the files are blocking the trash from emptying is because of specific ".app" files from third party companies like Adobe products. Not the user files or the various help documents but instead the actual mother program. Here's how to fix this problem:
1) remove from the trash all the actual software programs like Photoshop, InDesign, DreamWeaver and so on and put them on the desktop.
2) Command "I" (info) and when the dialog box opens go to the "Name & Extension" text box and remove the ".app" from the software name. Example: Photoshop.app change to Photoshop.
3) the program icon will change to a "folder icon".
4) put the folder icon back into the trash and you should be able to now empty the trash.
If you continue to get the error code 8003 it's because you may still have one or more software programs in the trash that needs to go through this process. Remember - it's not the user files or help documents or supporting files that is causing this but instead the "actual product programs".
JKai

How to use error table in mapping level?

Hi all
Any one please tell me how to use error table in mapping level or how to handle the errors in mapping.
I am creating one error table in oracle but i dont know how to use it in mapping.
Thanks in advance.
Kumar

Hi Kumar,
You need to use Error Table along with the Data Rule .
Error tables are used with Logical error handlers (Data Rules). Detailed description on using data rules is explained in the following document
http://www.oracle.com/technology/products/warehouse/pdf/OWB10gR2_ETLandBusinessRules.pdf
In a nut shell usage of error tables is as follows.
1. Create a data rule associate it with a table (Target table or table in which you load data).
2. Use the table in a mapping as target table.
3. Deploy the table and mapping.
Now in the target schema one more table will be created with the name <target table name>_ERR. When a mapping is executed the data which violates the data rule gets into this error table.
The following has to be done to have error table name of customers choice.
1. Right click on the table and click configure.
2. Give the table name in "shadow table name" section.
3. Deploy the table.
4. Use this table in a mapping. Now in the mapping on this table properties in "Error Table Name" section the name of the table specified in "shadow table name" will be populated.
Thanks,
Sutirtha

How to handle system errors in XI using BPM? please help!

Hi Experts,
I have a requirement where I have to handle system errors. For example when I am making RFC call using RFC adapter if the remote destination is down then I have create a understandable error message and store it in another SAP table.
How to handle it? I am using BPM. I can see that there is "Exceptions" in the send step. How to use this?
Thanks
Gopal

Hi Gopalkrishna,
In this case whenever you get Mapping Exception , you can raise an Exception with the help of BPM and you can send the status to the RFC. But with the help of BPM.
For a Simple case refer:
http://help.sap.com/saphelp_nw2004s/helpdata/en/33/4a773f12f14a18e10000000a114084/frameset.htm
If you want you can do it without a BPM
and throw an exception in case any of the values is missing:
have a look at this weblog on how to throw exceptions
in a nice way:
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
Also just go through <a href="/people/sap.user72/blog/2005/02/23/raising-exceptions-in-sap-xi-mapping Exceptions in SAP XI Mapping</a> and see if it helps you solve the problem.
Also go through these links:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7f2243d711d1893e0000e8323c4f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/f2bbc8142c11d3b93a0000e8353423/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5d/2166e6a91d11d188de0000e8216438/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/05/bb223905b61b0ae10000000a11402f/content.htm
Please do let know if it helped.
Regards,
Abhy

How to use fault message for error handling.

HI
Anybody has an idea about how we use fault messages to handle errors in XI
Thanks
Debraj

Hi,
Refer this link. This pdf file has descriptions about fault message types and how to use it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4cdfc390-0201-0010-2197-da4ada09f281
Regards,
Uma

How to handle the errors using RSRV tcode

Hi all,
Could any one give tell me how to handle the errors,(if possible give me some example errors)and correct the errors using RSRV tcode.
Thanks & Regards,
Aswini.

Hello Aswini,
For further details on RSRV go through the link:
http://help.sap.com/saphelp_nw04/helpdata/en/92/1d733b73a8f706e10000000a11402f/frameset.htm
Hope it helps
Cheers
SRS

How do I resolve "Error processing your request", when using Download link in My Orders (photoshop 5

How do I resolve "error processing your request" when using the download link in My Orders for photoshop 5

As Jeff already hinted at, try a different browser. Such issues almost always are local problems on your end. Something is either changing or blocking the HTTP headers used for forwarding (could be your router, a desktop firewall or other security tools) or a JavaScript is not running/ being blocked.
Mylenium

How to solve this error using OSX Server's bots

Plz help me.
My remote repository is SVN version controll system.
when I started integration using bot in OSX Server. this error was pisplayed on a log.
how to solve this error to integrate my project using OSX Server.
Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:466 77537310 +61ms] Will NOT send email notifications because notifyCommitterOnFailure is NO Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:470 77537310 +0ms] Posting email notification for bot run with type com.apple.notifications.BotFailed Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:471 77537310 +0ms] Sending email to committers = (null) Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:1033 77537310 +0ms] Posting notification of type com.apple.notifications.BotFailed Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:199 77537310 +0ms] Posting notification for bot run GUID f87f0098-f8ca-4bfa-945e-cbb11a2f6abb of type com.apple.notifications.BotFailed Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{AuthService.enterMagicalAuthRealm()} Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +45ms] Connecting to https://localhost:4443/svc to execute [https]Request{XCBotService.postNotificationForBotGUID:andRunGUID:andNotificati onType:additionalEmails:(c6189ca0-0649-0649-c01e-81c4d0b52dd9,f87f0098-f8ca-4bfa -945e-cbb11a2f6abb,com.apple.notifications.BotFailed,( ))} Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:601 77537310 +84ms] Deleting work queue item: cf7fe6b8-4df8-b723-4794-50fbf27955ed Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{XCWorkQueueService.deleteWorkQueueItemWithGUID:(cf7fe6b8-4df8-b7 23-4794-50fbf27955ed)} Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:929 77537310 +13ms] Marking build bundle complete with status failed and sub-status internal-checkout-error Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{AuthService.enterMagicalAuthRealm()} Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:97 77537310 +55ms] Updating bot run with GUID f87f0098-f8ca-4bfa-945e-cbb11a2f6abb Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:102 77537310 +0ms] Updating bot run (f87f0098-f8ca-4bfa-945e-cbb11a2f6abb): { guid = "f87f0098-f8ca-4bfa-945e-cbb11a2f6abb"; status = failed; subStatus = "internal-checkout-error"; } Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{XCBotService.updateBotRun:({ guid = "f87f0098-f8ca-4bfa-945e-cbb11a2f6abb"; status = failed; subStatus = "internal-checkout-error"; })} Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:108 77537310 +121ms] Updating bot with GUID c6189ca0-0649-0649-c01e-81c4d0b52dd9 Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:117 77537310 +0ms] Updating bot with latest bot run GUID key Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:124 77537310 +0ms] Updating bot (c6189ca0-0649-0649-c01e-81c4d0b52dd9): { guid = "c6189ca0-0649-0649-c01e-81c4d0b52dd9"; latestFailedBotRunGUID = "f87f0098-f8ca-4bfa-945e-cbb11a2f6abb"; latestRunStatus = failed; latestRunSubStatus = "internal-checkout-error"; } Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{XCBotService.updateBot:({ guid = "c6189ca0-0649-0649-c01e-81c4d0b52dd9"; latestFailedBotRunGUID = "f87f0098-f8ca-4bfa-945e-cbb11a2f6abb"; latestRunStatus = failed; latestRunSubStatus = "internal-checkout-error"; })}

Hello,
You need to make sure both names match exactly

How do you solve error "You can't use this version of the application Install Mac OS X.app with this version of Mac OS X" when trying to go back to leopard from lion?

How do you solve error "You can't use this version of the application Install Mac OS X.app with this version of Mac OS X" when trying to go back to leopard from lion?
Local Mac shop said to hold down "c" after inserting disk to get "disk utility" to come up in order to wipe hard drive. I can't seem to get it to do this.

This W7 was purchased for using Fusion, as others did - per reviews from amazon. The technician today called their contact at VMWare - Fusion not officially for use with Lion - even though I read at the VMWare support site that others have made it work. Apparently my setup doesn't work.
Do you know how to do the proceedure for bringing up the disk utility when starting the disk?
BTW, some of the windows applications I want to continue using are Incredimail, Calendarscope, Stamps.com and a few others I have used over many years. What do you use for email and calendar?
Wow, sounds like another reason to not use MS Windows.
Regarding your Disk Utility question, please elablorate I'm not sure what you're trying to do. Disk Utilty is just that...a utility, it's something most users never have to use especially on a new computer. Let me know what you're trying to do there before I give you some instructions.
As for as your Windows apps I would recommend using Mail and iCal, both come as part of OS X and are very robust tools. Don't discount the software built right into OS X it's very robust and powerful not all like the bloatware most Windows boxes ship with. Stamps.com well I'd look for another alternative. It's clear they don't support OS X which makes me a little suspicious that they're so behind the times.
Also if you have not been exposed to these links before I'd strongly recommend bookmarking them and using them. They're extermely useful!
Switch 101
Mac 101
Find Out How Video tutorials

Javascript error on - Help - Learn how to use Numbers with this online...

I am trying to find out more about Numbers. I am using iTunes 9.1.1 on a Vista PC. I get a Javascript error in Internet Explorer 8 when I try to access:
Help - Learn how to use Numbers with this online resource.
http://help.apple.com/numbers/1.0
The link redirects to the following page:
http://help.apple.com/iwork/safari/interface/#tan727163ed
The above page is blank except for boxes for Keynote Help, Pages Help, Numbers help, and a blank input field that seems to do nothing. Here is the Javascript error message from Internet Explorer 8:
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729)
Timestamp: Tue, 1 Jun 2010 20:55:54 UTC
Message: This command is not supported.
Line: 1
Char: 41589
Code: 0
URI: http://help.apple.com/iwork/safari/interface/javascript.js

Link also does not work for me in WIN 7 with IE8. However, it does work in Chrome in WIN 7. It also works in Safari on my G4. Suggest you try Chrome or it may work in another browser like FireFox or Safari in Vista.

Ihave ipod 4g and my ios is 4.3.3 and i want to update or restore it to ios 5 or 6 and my itunes version is 10.6 and i am using window 7 home premium. while restoring i am getting error 3194,1600,1601,1602,1603,1604. How to fix these error.....

ihave ipod 4g and my ios is 4.3.3 and i want to update or restore it to ios 5 or 6 and my itunes version is 10.6 and i am using window 7 home premium. while restoring i am getting error 3194,1600,1601,1602,1603,1604. How to fix these error..... can you please help me

See the actions for those errors located here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting

Sessionbeans cannot be used concurrently error? How to solve in EJB1.1?

When using EJB1.1 with WLS 6.0, is there a way to make the weblogic block a
concurrent call till the previous call is over? instead of throwing the
sessionbeans cannot be used concurrently error?
I found the <allow-concurrent-calls> xml descriptor for EJB2.0 but was
wondering how to do this with EJB 1.1
Thanks
Siva

i understand and i don't understand.
lol
thats possible for someone who is using xemacs but someone who is using Eclipse or JCreator how do i do that?
if u don't want to answer that question could u put an assertion in this code, for example : asser -> if the num < = 0 !
here is the code:
import java.io.*;
public class Capicua {
     public static void main (String[] args) throws Exception {
          int digit, num;
          int inverted = 0;
          int x;
               BufferedReader br = new BufferedReader(new InputStreamReader(System.in));
               System.out.print(" Insert number: ");
               num=Integer.parseInt(br.readLine().trim());
               Assertion.assert(num <= 0, "Number can't be shorter or equals to zero!"); <--- how do i put an assert here? ( with the "do - while" its easy, but and with the asserts?
               x=num;
               while(num > 0) {
               digit = num % 10;
               num = num /10;
               inverted = inverted * 10 + digit;
               System.out.println("inverted = " + inverted);
                    if(inverted == x) {
                         System.out.println("Capicua");
                    }else{
                         System.out.println("not a capicau");
}

How to use BAPI_ASSET_RETIREMENT_POST(error)

Similar Messages

Maybe you are looking for