How to use fault message for error handling.

HI
Anybody has an idea about how we use fault messages to handle errors in XI
Thanks
Debraj

Hi,
Refer this link. This pdf file has descriptions about fault message types and how to use it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4cdfc390-0201-0010-2197-da4ada09f281
Regards,
Uma

Similar Messages

How to use fault ploicies for DB adpter

Hi
Can fault policies applicalble to DB adapter. I added the porttype of DB adpater wsdl in fault-bindings.xml. while executing the DB adpter bpel i am getting a remote fault (bcoz i stopped database)and its not retrying just errored out. Can anyone explain on this
Thanks In Advamce
Srikanth

Hi
Is there something in the log file concerning handling of the fault ?
In my logs i can see only this error "Caused by: com.oracle.bpel.client.delivery.ReceiveTimeOutException: Waiting for response has timed out" bcoz i stopped my database
Added the below portType in fault-bindings.xml
<portType xmlns:db="http://xmlns.oracle.com/pcbpel/adapter/db/insert/">db:insertdata_plt</portType>
but i am unable to retry this process
for Fault policy added the following
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension" name="bpelx:remoteFault">
<condition>
<action ref="ora-retry"/>
</condition>
</faultName>

<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension" name="bpelx:bindingFault">
<condition>
<action ref="ora-rethrow-fault"/>
</condition>
</faultName>
</Conditions>
<Actions>

<Action id="ora-retry">
<retry>
<retryCount>3</retryCount>
<retryInterval>30</retryInterval>
<retryFailureAction ref="ora-human-intervention"/>

</retry>
</Action>
thanks for the help

Error handling using fault message type in outbound synchronous ABAP proxy

Hi,
We've a scenario, outbound synchronous ABAP proxy to synchronous SOAP receiver. The requirement is to send multiple records in a single rquest and get response for all the records sent (in the same response message).
Say if I send 10 records from ECC, I should get 10 records as response from SOAP to ECC. But the problem here is, there could be some invalid requests, for which an invalid error status code should be sent as part of response.
Source Structure
Req_Proxy
    req (0..unbounded, string)
Response Structure
Resp_SOAP
Resp (0..Unbounded)
       respString (0..1, String) (carries the actaul response message)
      status code (0..1, String) (carries the status of the response, for ex, 001 (successful), 002 (error))
And now we are planning to make use of Fault Message Type, to track the errors from SOAP (status code 002). But, we are not sure on how to track this for all the requested records. Is it possible to track the errors for all the requested records in a singe call using fault message type? For eg if 8 records are successful and 2 are invalid, then we should get 10 records in response 8 for valid and 2 for invalid accordingly.
Please calrify.
Thanks.
Rohit

For eg if 8 records are successful and 2 are invalid, then we should get 10 records in response 8
for valid and 2 for invalid accordingly.
Check if you can modify the WSDL structure to include an error node that would get populated incase of invalid entries....this would mean that you get the success and failure details in the single message....also at the proxy-end make the necessary change in your DT.....may be then you do not need to use the fault message...
Regards,
Abhishek.

Handling Fault Messages for JDBC Receiver (Syn Inbound)

Dear Freinds,
Can we handle fault messages for JDBC Receiver which is synchronous.
OB Proxy Syn <> IB JDBC Syn
1. How to handle the same ? Please give some examples.
2. Should we use Stored Procedures at Oracle side to handle the fault messages and send back as response to the Proxy Response. Will it work.
Thanks & Regards
K.Ramesh

Dear Friend,
I have 2 interfaces where Proxy is OB & JDBC is IB. In the first interface both sender and Receiver are synchronous and in the second one it is Async.
In the first interface i have to send one field from R/3 table along with Native SQL query string to XI and the response of the SELECT query is sent back to the sender.
Assume if no fields are selected based on the field sent then proper error message has to be sent instead of the response message.
In the second interface i will be using UPDATE query at Asyn JDBC receiver.
How to do this if you are having JDBC Receiver.
I saw in many blogs where they had mentioned that we cannot handle fault messages in the Receiver JDBC.
KIindly explain.
Thanks
K.Ramesh

BPM for error handling and acknowledgements

Hi,
Can any one tell me how to handle BPM for error handling and acknowledgements in one scenario.
Please send me the link if you have other wise give me the solution on the same.
Thanks,
Nagesh

Hi !
Just check out these links This might help you.
Usually Application Level Acknowledgement is considered during Sync communication. If you are using RFC, you can make use of Sync communication. So you can handle it without bpm, provided your both sender and receiver are sync interfaces.
To know about Ack-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
you can not dirrectly access the content of the ACK, however the BPM shows different behaviours based on the ACK status. E.g. if the ACK contains a success message the BPM will continue in its normal process, if the ACK contains a permanent error, it will either stop or go through an exception branch (provided such a branch has been defined). Have a look at the documentation: http://help.sap.com/saphelp_nw04/helpdata/en/43/65ce41ae343e2be10000000a1553f6/content.htm It doesnt"t state the above mentioned behaviour in detail but says that you need to define an exception branch.
The trickiest part is always to find out, when you will get a transient vs. as permanent error ack. If you are using ACKs with Proxies refer also to this link http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm and this http://help.sap.com/saphelp_nw04/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/7b/94553b4d53273de10000000a114084/content.htm
The following link has entire configuration of Receiver XI Adapter (including acknowledgements)
http://help.sap.com/saphelp_nw04/helpdata/en/f4/0a1640a991c742e10000000a1550b0/content.htm
 eror handling in BPM.

1. CCMS monitoring
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/42fb24ff-0a01-0010-d48d-ed27a70205a8
2. BPM Monitoring
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
3. Monitoring XML Messages http://help.sap.com/saphelp_nw04/helpdata/en/41/b715045ffc11d5b3ea0050da403d6a/frameset.htm
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
monitoring BPm https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
Reconciliation of Messages in BPM - /people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
Also see the below BPM related links
check list for BPM https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
And some weblogs
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
Thanks !!!
Regards
Abhishek Agrahari
Questions are welcome here!!
Also mark helpful answers by rewarding points

BPM Fault Message Exception error !

Hi here is what I am doing
Sync webservice-->Sync webservice call using ccBPM.
This is what I defined in the BPM
1.)Sync rec
2.)Block with Exception handler.
3.) Sync send inside the Block with Fault exception defined.
I defined fault messages for the interface. The Interface works fine when there is no exception but when there is a Fault exception I get the following error in SXMB_MONI_BPE "No exception defined for fault message Faultmessage urn:XXXXX:XXXXXXX ". Exception 8999, Error type 2, Area SWF_XI_ADAPTER Message 81. Variable1 Faultmessage and Variable2 the namespace".
I rechecked my BPM and could see the Fault Exception defined for the Sync send step and it has an exception defined for it too.
I checked SXI_CACHE and the return code is 00.
We are running on PI7 SP13. Did any one face this kind of problem .

Hi there,
I have the exact issue in PI 7.1. Have any of you guys could resolve it? Can you please share your responses.
Thanks.
Anshul

Fault Message for inbound asynch ABAP proxy

Hi All,
I've got scenario File -> XI -> ABAP proxy all asynchronous.
Inside a proxy I'm throwing an exception using fault message.
I don't see application error in SXMB_MONI on XI, I can see that only in SXMB_MONI on receiving system.
Is it possible to have flag Application Error on XI monitor as well ?
Best Regards,
Tomasz

Jai,
I've checked that many times.
I'll describe my scenario in more details.
1. From the file I'm receiving a lot of items and trying to process as much as possible in one proxy call.
2. Those ones which are causing errors are sent out to XI (outbound proxy) one by one. XI sends them to the same interface which is used in 1. step where I have condition which checks for single item and when it's wrong then exception is thrown.
One SCM box is sender and receiver which my cause that problem.
Tomasz

How to use the Latest End to handle overdue task?

Experts,
How to use the Latest End to handle overdue task?
Thanks you very much!
Ken.li

Hi KL,
could you give more details to get more from the Forum Experts.
Just to give you an example. If you using a User Decision step and you want a Deadline to be set, click on the Latest End tab for the User Decision Step, there is a Refer/Date/Time column, list out 'Work item creation'.
Below you would find Time column, enter appropriate period.
If you want a message to be escalated to someone after the period that you entered above has passed, you can enter the recipient in the column 'Recipient of message'.
Hope it helps.
Aditya
P.S - how good your query is, better answers you can expect from others.

How to use same actions for differ pop-up buttons

Hi gurus,
I am using 2 popup in a view.same popup's having same buttons 'Yes', 'No'.when i use 1st one i have to create an action for that Yes button where i put my code for that particular Action.
But when i used 2nd one the action define for that is not acceptable with differ name.it takes only standard one.
Now my Query is : How to use same actions for differ pop-up buttons with in a similar view?Where i put my code.
Plz sugges me.
Points will be sured.
Sanket sethi

Hi ,
u can use the method SUBSCRIBE_TO_BUTTON_EVENT of the IF_WD_WINDOW interface ... to handle the event fired by the popup .....used this method after creating the popup window ...
regards
Yash

How to Use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA

Hi ,
How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
May i know what are the input parameters & fields mandatory
for each Table structures ct_data , ct_datax , it_descript , it_longtext.
Can any one explain me Step by Step Process.
B'cos i tried with below code. Equipment is not getting created.
wa_itab-equipment_ext = '000000000100000001'.
wa_itab-descript      = 'Test 2 -> Lube Oil Pump'.
wa_itab-text_language = 'EN'.
wa_itab-sdescript     = 'Short Description'.
APPEND wa_itab TO it_itab.
CLEAR wa_itab.
LOOP AT it_itab INTO wa_itab.
    ct_data-ta_guid       = '000000000000000001'.
    ct_data-equipment_ext = wa_itab-equipment_ext.
    ct_data-descript      = wa_itab-descript     .
    ct_data-valid_date    = sy-datum.
    ct_data-equicatgry    = 'M'.
    APPEND ct_data.
    CLEAR ct_data.
    ct_datax-ta_guid       = '000000000000000001'.
    ct_datax-equipment_ext = 'X'.
    ct_datax-equipment     = 'X'.
    APPEND ct_datax.
    CLEAR ct_datax.
    it_descript-ta_guid       = '000000000000000001'.
    it_descript-text_language = wa_itab-text_language.
    it_descript-descript      = wa_itab-sdescript    .
    APPEND it_descript.
    CLEAR it_descript.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'LTXT'.
    it_longtext-text_line      = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'aaaaaaaaaaaaaaa'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'bbbbbbbbbbbb'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'cccccccccccccccc'.
    APPEND it_longtext.
    CLEAR it_longtext.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
call BAPI-function in this system
    CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
      TABLES
        ct_data     = ct_data
        ct_datax    = ct_datax
        it_descript = it_descript
        it_longtext = it_longtext
        return      = return
      EXCEPTIONS
        OTHERS      = 1.
    IF sy-subrc = 0.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      WRITE : 'Successful'.
    ENDIF.
    IF NOT return IS INITIAL.
      LOOP AT return.
        IF return-type = 'A' OR return-type = 'E'.
          WRITE : 'Error'.
        ENDIF.
      ENDLOOP.
    ENDIF.
    REFRESH return.
ENDLOOP.
Regards
SUrendar

Hi ,
How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
May i know what are the input parameters & fields mandatory
for each Table structures ct_data , ct_datax , it_descript , it_longtext.
Can any one explain me Step by Step Process.
B'cos i tried with below code. Equipment is not getting created.
wa_itab-equipment_ext = '000000000100000001'.
wa_itab-descript      = 'Test 2 -> Lube Oil Pump'.
wa_itab-text_language = 'EN'.
wa_itab-sdescript     = 'Short Description'.
APPEND wa_itab TO it_itab.
CLEAR wa_itab.
LOOP AT it_itab INTO wa_itab.
    ct_data-ta_guid       = '000000000000000001'.
    ct_data-equipment_ext = wa_itab-equipment_ext.
    ct_data-descript      = wa_itab-descript     .
    ct_data-valid_date    = sy-datum.
    ct_data-equicatgry    = 'M'.
    APPEND ct_data.
    CLEAR ct_data.
    ct_datax-ta_guid       = '000000000000000001'.
    ct_datax-equipment_ext = 'X'.
    ct_datax-equipment     = 'X'.
    APPEND ct_datax.
    CLEAR ct_datax.
    it_descript-ta_guid       = '000000000000000001'.
    it_descript-text_language = wa_itab-text_language.
    it_descript-descript      = wa_itab-sdescript    .
    APPEND it_descript.
    CLEAR it_descript.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'LTXT'.
    it_longtext-text_line      = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'aaaaaaaaaaaaaaa'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'bbbbbbbbbbbb'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'cccccccccccccccc'.
    APPEND it_longtext.
    CLEAR it_longtext.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
call BAPI-function in this system
    CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
      TABLES
        ct_data     = ct_data
        ct_datax    = ct_datax
        it_descript = it_descript
        it_longtext = it_longtext
        return      = return
      EXCEPTIONS
        OTHERS      = 1.
    IF sy-subrc = 0.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      WRITE : 'Successful'.
    ENDIF.
    IF NOT return IS INITIAL.
      LOOP AT return.
        IF return-type = 'A' OR return-type = 'E'.
          WRITE : 'Error'.
        ENDIF.
      ENDLOOP.
    ENDIF.
    REFRESH return.
ENDLOOP.
Regards
SUrendar

Exception using fault message in java server proxy.

Hi All,
I am trying to use Fault message inside my server proxy code in Asynchronous java server proxy. I am referring the below mentioned link :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d06315a6-e66e-2910-039c-ba8bbbd23702?quicklink=index&overridelayout=true
I successfully deployed my SDA file but while running the scenario(http-XI-ftp in PI7.11) i am getting the folowing exception under MDT:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing inbound message. Exception: Cannot locate proxy bean ServerProxyFTTest3.
I am using the following library refernces under application-j2ee-engine.xml file: com.sap.aii.af.sdk.lib, com.sap.aii.proxy.svc, com.sap.xi.util.misc,com.sap.guid,com.sap.exception all of type "weak".
I have checked almost all the forums related to fault messages in asynchronous java server proxy but couldn't find much help.
Request you all to help me.
Thanks
Amit

Hi Rajesh,
I am deploying my SDA file on Non Central Adapter Engine.
I have also registered my interface using:
http://ISVSAPPISB:51000/ProxyServer/register?ns=http://infosys.com/poc&interface=SI_Proxy_IA&bean=localejbs/ServerProxyFTTest3&method=sIProxyIA
But still i ma getting the same exception.
Hi Gabriel,
I implemented my scenario using the same. But in addittion to the librarry referneces mentioned over there i have added one more refrence in it "com.sap.exception" of type "weak". My structure is like this:
<?xml version="1.0" encoding="UTF-8"?>
<application-j2ee-engine xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="application-j2ee-engine.xsd">
<reference reference-type="weak">
<reference-target provider-name="sap.com" target-type="library">com.sap.aii.af.sdk.lib</reference-target>
</reference>
<reference reference-type="weak">
<reference-target provider-name="sap.com" target-type="service"> com.sap.aii.proxy.svc</reference-target>
</reference>
<reference reference-type="weak">
<reference-target provider-name="sap.com" target-type="library">com.sap.xi.util.misc</reference-target>
</reference>
<reference reference-type="weak">
<reference-target provider-name="sap.com" target-type="library">com.sap.guid</reference-target>
</reference>
<reference reference-type="weak">
<reference-target provider-name="sap.com" target-type="library">com.sap.exception</reference-target>
</reference>
</application-j2ee-engine>
Please help.
Thanks
Amit

How to configure Broadcast messaging for IC Webclient profile

Dear all,
How to configure Broadcast messaging for IC Webclient profile. what are the prerequisites for it?
We are not using EP interface for IC Webclient, then where can I find broadcast messaging URL in SAP CRM system.
I have checked for the relevant BSP application, but could not find.
Please help me to configure the scenario successfully, your help will be highly appreciated.
Best regards,
Raghu ram

Hi raghu
In CRM Broad cast messaging application is CRM _BM,
Go to easy access u2013 go to favourites u2013 select add other objects - select BSP Applications- then select CRM_BM Application.
Select that BSP application and test it u2026
`
Regards,
Narsimha

How to use PO message type to output 'Form' as PDF file

Dear experts,
I am working for a topic of how to use PO message type to output 'Form' as 'PDF file', and save to external file system automatically.
Any one familiar to this topic, please kindly give me some guide, thank you!
Regards,
Joyce

Hi,
Go through the program RSTXPDFT4 (Converting SAPscript (OTF) or ABAP List Spool Job to PDF), you will get some idea. Using this program you can convert spool into PDF file.
-Alpesh

Option for error handling for DTP, ' no updata, no reporting" and "deactiva

Hello Gurus,
     option for error handling for DTP, ' no updata, no reporting" and "deactivated" , please give some explanation and instance for them?
Many Thanks,

On the Update tab page, specify how you want the system to respond to data records with errors:
                            a.      No update, no reporting (default)
If errors occur, the system terminates the update of the entire data package. The request is not released for reporting. However, the system continues to check the records.
                            b.      Update valid records, no reporting (request red)
This option allows you to update valid data. This data is only released for reporting after the administrator checks the incorrect records that have not been updated and manually releases the request by setting the overall status on the Status tab page in the monitor (QM action).
                            c.      Update valid records, reporting possible
Valid records can be reported immediately. Automatic follow-up actions, such as adjusting the aggregates, are also carried out.
http://help.sap.com/saphelp_smehp1/helpdata/en/42/fbd598481e1a61e10000000a422035/content.htm
Hope it helps.
rgds, Ghuru

Configuring Fault Message For the Send Synchronous step

Hi,
PI receives a file and sends a soap request to Third pary system. If the data sent to third party system is correct, PI receives a empty soap envelopre. If the data is not approriate, PI receives an fault message(Application Error).PI has to trigger an email in either case.
I have configured a send synchronous step to initiate Request/Response with a validation fault, followed with send step for triggering an email.once the interface is executed, The process is not moving further from Send synchronous step.In short the steps after send synchronous are not being executed.
Regards,
Kiran.

Hi,
I have created exception branch if PI receives a validation fault. PI will trigger success email, if the PI receives blank response from third system.PI will trigger failure email, if PI receives a fault message.
Regards,
Kiran.

How to use fault message for error handling.

Similar Messages

Maybe you are looking for