How to use bezier lines or curves

Can you use bezier lines or curves to make a graphic move?
How do you create a bezier line or curve?

Start with this tutorial by Kim Cavanaugh.
http://www.communitymx.com/abstract.cfm?cid=A15CFD250F9D01EF
alex
yachtgeek wrote:
>
>
> Can you use bezier lines or curves to make a graphic
move? How do you create a bezier line or curve?

Similar Messages

How to use at-line selection in ALV

Can someone help me about how to use at-line selection in an ALV

u can try in user_command
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
         I_CALLBACK_PROGRAM = G_REPID
         IT_FIELDCAT = GT_FIELDCATALOG
         I_CALLBACK_PF_STATUS_SET = 'PF_STATUS_SET'
         I_CALLBACK_HTML_END_OF_LIST = G_HTML_END_OF_LIST
         I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
         I_GRID_SETTINGS = GS_SETTINGS
         IS_LAYOUT = GS_LAYOUT
         I_SAVE = G_SAVE
         IS_VARIANT = GS_VARIANT
         IT_EVENTS = GT_EVENTS[]
*      I_SCREEN_START_COLUMN = 0 "Use coordinates for
*      I_SCREEN_START_LINE = 0 "display as dialog box
*      I_SCREEN_END_COLUMN = 0
*      I_SCREEN_END_LINE = 0
    IMPORTING
         E_EXIT_CAUSED_BY_CALLER = G_EXIT_CAUSED_BY_CALLER
         ES_EXIT_CAUSED_BY_USER = GS_EXIT_CAUSED_BY_USER
    TABLES
         T_OUTTAB = I_REP
    EXCEPTIONS
         PROGRAM_ERROR = 1
         OTHERS = 2.
FORM USER_COMMAND USING R_UCOMM TYPE SY-UCOMM
                        RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
    WHEN '&IC1'.
      CASE RS_SELFIELD-FIELDNAME.
        WHEN 'XXXXX'.
          READ TABLE I_xxx INTO V_xxx
            WITH KEY XXX = RS_SELFIELD-VALUE.
          IF SY-SUBRC = 0.
          ENDIF.
        WHEN OTHERS
      ENDCASE.
ENDCASE.
ENDFORM.

How to Use document.Lines.SetCurrentLine

Hi there, due to an enormous amount of time spent on this issue, I thought I would share how to use the SetCurrentLine method as posted to me by SAP support:
It seems very cumbersome, as I have now to do an extra Recorset look up to get all the lines if I want to get the correct index - but at least it works (hopefully).
Daniel
SUPPORTS MESSAGE ****
the way the SetCurrentLine works is as following:
You do not have to use neither the LineNum nor the VisOrder as your
parameterfor the setCurrentLine method.
The system will use the corresponding index (starting at zero)linked to
that line when running a query on the database and sorting the lines by
LineNum.
#,,DocEntry,, Item ,,LineNum,,Price,,VisOrder
1,,11669,, A1001,,,, 600,00,,
2,,11669,, A1003,,2,, 3,00,, 2
3,,11669,, A1005,,3,, 600,00,,1
See example above, that is the result of querying the database on that
sales order and sorting by LineNum.
The order in which the items are displayed in the application is based
on the VisOrder. In this example items are displayed A1001, A1005 amd
A1003.
In order to update Item A1005 I will need to create a recordset, query
the database and then loop the recordset to find the corresponding item
and then use that index from the recordset to set the value for the
SetCurrentLine method. In the example above index 0 from recordset
points at item A1001, index 1 points at item A1003 and index 2 points at
A1005 so your code should use setCurrentLine(2) to update item A1005.
If you try to use LineNum (3 in this case) you will get an error message
as index 3 does not exist in the recordset collection ( only 3 items
with indexes 0,1 and 2). If you use visOrder 1(for item A1005) then the
system will update item A1003 as 1 is the index for A1003 in the
recordset.
END OF SUPPORTS MESSAGE ********

Hi Curtis,
Your situation sounds a little different to mine, in that I know the LinNum of the documentline that I need to update - that is what the lineNumber variable is...
To update all the rows, I guess you would just iterate through all the lines sequencially (ie starting at 0 and ending at document.lines.count:
for(int i = 0; i < doc.Lines.Count; i++)
doc.Lines.SetCurrentLine(i);
// do your thing here...
How do you know what lines you want to update??
Dan

In interactive how to use AT LINE-SELECTION WITH SET PF-STATUS

Hi all,
I am developing an interactive report in which i am using gui status (pf-status ) for AT USER-COMMAND and AT LINE-SELECTION event .But when i used at line-selection event is not working with pf-status even though i use PICK function code .
plz help me to work with both the event i.e.
AT USER-COMMAND.
AT LINE-SELECTION.
Thanks a lot in Advance .
Regards,
Tarak

hi,
In PBO of Module Pool, Please Write in this way
MODULE status_9001 OUTPUT.
Set the PF-STATUS
SET PF-STATUS '9001'.
To Set the Title of Screen
SET TITLEBAR 'TITLE'.
ENDMODULE
Setting PF status to the (SAP) system default
set pf-status 'BASIC'.
How to check for pf-status
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'ART'.
PERFORM STYR_ARTSKONTI.
WHEN 'PST'.
PERFORM STYR_POSTER.
WHEN 'BIL'.
PERFORM VIS_BILAG.
ENDCASE..

How to Use At line-Selection Functionality in dialog programming or mpp .

hi
i had created customized Transaction ,
in that notification field is there , their when they place notification number ,after that when they double click on that, it have to go to iw23 .(so that they will get confirm that notification number is write )
i have tried to use AT LINE-SELECTION event it showing error ,
where i have to write and which event i have to use ?
may i know how can i resolve this ?
Thanks a lot
Edited by: raghu111 on Dec 3, 2011 6:14 AM

hi sharin.
Thanks for ur reply
i followed ur steps
WHEN 'PICK'.
DATA : dc_scrfield TYPE zmotor-qmnum.
GET CURSOR FIELD dc_scrfield.
CHECK NOT dc_scrfield IS INITIAL.
IF dc_scrfield = zmotor-qmnum.
    IF NOT zmotor-qmnum IS INITIAL .
      set PARAMETER ID 'IQM' FIELD zmotor-qmnum.
      call TRANSACTION 'IW23'.
    ENDIF. .
    ENDIF.
its not working
but i already tried like this .
WHEN 'PICK'.
if field name =tablename-fieldname
set PARAMETER ID 'IQM' FIELD zmotor-qmnum
call transaction 'IW23'
endif
i written in pai event ." i have dought here also whether i have to write here r not
HERE ITS WORKING BUT PROBLEM IS FOR ANOTHER FIELDS ALSO ITS RESPONDING . how to stop the responding .
as per my knowledge in condition only prob but i tried i didnt solve
please send me one example or tell me how to solve
for better understanding only i pasted coding
thanks a lot
Edited by: raghu111 on Dec 5, 2011 12:21 PM

How to use new line character?

Hi,
i am getting string value like this :
name john company
test1 position director sal
45000
i am getting this value in a string.
i want to display the value like below :
name john
company test1
position director
sal 45000
how to proceed on this ? can we use new line character here ? how can we use that? pls suggest me on this.
Regards,
Pavani

Hi Friend,
you can use the split method of String. to split that string base on space.
for Example
     String st = "Jeetendra Kumar Choudhary";
     String[] string = st.split(" ");
     for (int j = 0; j < string.length; j++) {
          System.out.println(string[j]);
By this way you can get the each word separately and you can concatenate it again in single string.if you need it.
Regards
Jeetendra.

How to use command line with acrobat to extract page(s) from pdf file?

I have adobe acrobat, and have a pdf file with over 500 pages. I need to extract small chunks of pages from it as seperate pdf files. I was hoping I could use command line interface to do this faster.
Something like:
acrobat src des start end
so for example
adobe file.pdf my_folder 3 5
Is this possible? There are many chunks and I don't want to manually do it for every chunk. Command line would be much easier...
Thanks

I can't find any programs... sorry.
Can you create one for me please.
It should at least have these 5 arguments: (well the first one is not neccessary since were not using acrobat anymore...)
[program] [src path/src file] [destination path/file name] [start page (inclusive)] [end page (inclusive)]
for example:
acrobat ./my_file.pdf ./my_folder/chunk1.pdf 3 5
if start page == end page, then it only extracts that one page.
So this way I can just stack these comands on a .bat file or something (maybe like 100 commands), then run the bat file, and it will create all the files.
Thanks for doing this, it is appreciated.

How to use AT LINE-SELECTION and AT USER-COMMAND in one report????

Dear all,
I have a problem in reports I want to use AT USER-COMMAND.and AT LINE-SELECTION.both in the one report.
But as soon as I use SET PF-STATUS my AT LINE-SELECTION event stop workingand only AT USER-COMMAND is working.
How can I use both of them in one report for your reference I am giving my test program below.
REPORT ZTEST111 .
SET PF-STATUS '100'.
DO 10 TIMES.
WRITE:/ SY-INDEX.
HIDE SY-INDEX.
ENDDO.
START-OF-SELECTION.
AT LINE-SELECTION.
MESSAGE I002(SY) WITH SY-INDEX.
AT USER-COMMAND.
MESSAGE I002(SY) WITH 'USER COMMAND'.
END-OF-SELECTION.
Thanks in advance
Sachin Gautam

hi
Syntax
AT USER-COMMAND.
Effect
This statement defines an event block whose event is triggered by the ABAP runtime environment if, during the display of a screen list, a function with a self-defined function code was chosen.
Note
Self-defined function codes are all those that include character combinations, except for the following:
The function codes PICK and PF## ("##" stands for 01 to 24) do not cause the event AT USER-COMMAND, but the events AT LINE-SELECTION and AT PF##.
All function codes that start with the character "%" are interpreted as system functions and do not cause the event AT USER-COMMAND. The system functions for lists are listed in the following table 1.
The function codes in the following table 2, likewise, do not cause the event AT USER-COMMAND, but are handled by the list processor.
Table 1
Function code Function
%CTX Call a context menu
%EX Exit
%PC Save to file
%PRI Print
%SC Search for ...
%SC+ Find next
%SL Search in office
%ST Save to report tree
Table 2
Function code Function
BACK Back
P- Scroll to previous page
P-- Scroll to first page
P+ Scroll to next page
P++ Scroll to last page
PFILE name Store list lines in a text file named abap.lst in standard character representation in the standard directory of the application server. If a name is entered using name, this is converted to lowercase letters and used as the file name.
PL- Scroll to first line of the page
PL-n Scroll n lines back
PL+ Scroll to last line of the page
PL+n Scroll n lines up
PNOP No effect
PP- Scroll back one page
PP-n Scroll n pages back
PP+ Scroll one page forward
PP+n Scroll n pages forwad
PPn Scroll to beginning of page n
PRI, PRINT Print
PS-- Scroll to first column
PS++ Scroll to last column
PS- Scroll one column to the left
PS-n Scroll n columns to the left
PS+ Scroll one column to the right
PS+n Scroll n columns to the right
PSn Scroll to column n
PZn Scroll to line n
RW Cancel

How to make a Line Chart curved instead of straight from point-to-point?

I have a Line Chart that is is very jagged and plots directly from point to point, like this:
http://img818.imageshack.us/img818/7408/testhb.jpg
But I want to achieve something that looks a bit smoother where the line instead is curved from point to point, like this:
http://download.oracle.com/docs/cd/E12839_01/bi.1111/b32122/img/curvedline_graph.gif
Is this possible in Xcelsius 2008? I couldn't find anything in the graph's properties and I also had no luck when searching google/these forums for a solution. Thanks for the help!

Hello Richard
I have come across the same scenario today and I saw your .swf file and it was exactly what i was looking for.
Can you please be kind enough to send me the .XLF fil on <email address removed>
Thanks
Arshiyan
Message was edited by: Ludek Uher
I removed the email address as this is against the SCN Rules of engagement. Files can be uploaded via the "Use advanced editor" link on each SCN post.

How to use command line

Hi All
I want to create a Adobe Reader that when it startup will auto open a file.
so I add this file to SYSDrive and modify startup command....I add a command line like @SYSDRIVE\test.pdf ,\Files\@SYSDRIVE\test.pdf or c:\test.pdf....
but all testing will show error message~~
about my purpose How ot set the "Command line" parameter ??
thanks!!
wyldkao

Are you including the file with your virtualized app?

How to use under line in smartforms

Hi all,
I am displaying the data using text element is smartforms. i have created one style
and tried to attach that style to this text element. but it is displaying the error that zs1(the style created by me) is not existing. but when i check it in se72, it is existing. how to underline the data that i created in the text element of the smartforms.
please answer to this as soon as possible.
points will be awarded.
thanking u in advance,
cnu.

Hi Srini,
    Create a character format in smartstyles.
    Click on FONT tab of the character style.
        Click on Underlined.
    You that character format for the text element.
regards
Avi..

Always Use Primary Line / Auto Line Select CM 4.1(3)sr3c

Is it correct that the "Always Use Primary Line" system parameter and the phone device page "Auto Line Select" setting work together to affect a phone's off-hook behavior for incoming calls? I changed the Always Use Primary Line from the default (False to True) to change the behavior and force primary line only when the phone goes off-hook. When I then enabled Auto Line Select on the 7960G, I expected to reverse this global setting for that device only. But, that did not happen. In fact, no matter how Always Use Primary Line is set (True or False), the device page setting Auto Line Select (enable or disable) does not appear to cause any change at all. Has anyone else encountered this? If changing the Service Parameter takes effect without restarting callmanagers, wouldn't resetting the phone device force the change on the device page to take effect? Or, do I not understand the relationship between these two settings?

Auto Line Select comes into play when you are already on the phone and you have a new incoming call on another line, then should the focus change to that new ringing line so it can show you the caller-id or should the focus be on the active line. Depending on this, the softkeys and everything change on your screen and you don't have to press the line button to see all the keys.
Always use Prime Line is primary used when the phone goes off-hook. This determines if you want to go off-hook on the primary line all the time or not. If you choose to always use primary line, then everytime you go
off-hook, we use the first line on the phone and it does not matter if there is a call ringing on another line.
If its set to false, then when you go off-hook, it will go off hook on a line which is ringing and not your primary line.

I want to use command line to execute an oracle report?

Dear all,
I am using Oracle Application. Does anyone know how to use command line to execute an oracle report?
I mean execute command from client to server.
Please advice,
Amy
Edited by: amychan60 on Dec 13, 2009 11:33 PM

Hi,
Using Oracle Application Server the standard way for a client to request a report is via a HTTP request. This doesn't really lend itself to use directly on a command line on a client however you could use the following:
explorer "http://your_server/reports/rwservlet?report=report_name.rdf&userid=userid/password@db_sid&paramform=no&destype=FILE&desname=c:\temp\filename.pdf&desformat=pdf"
This will load explorer and submit that URL for you and request the report. You can change the parameters depending on the report output you require.
If you need something that is silent (ie doesn't load in explorer) you'll need to investigate other ways of submitting that URL request, perhaps using Java. You could also use SRW.run_report (Event Driven Publishing) to submit the request using SQL.
Cheers,
Toby.

In this report i have marked one line..if this width 30,i need to multiply by a number 0.3 and if the width =30,it multiplies by 0.37...how to use this logic here..??? anyone can help??

In this report i have marked one line..if this width < 30,i need to multiply by a number 0.3 and if the width >=30,it multiplies by 0.37...how to use this logic here..??? anyone can help??
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @SCCode nvarchar(30)
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
--Rcpt from PRDN (Condition checked for Return component exclusion also)
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'FG Item Code',
T3.ItemName as 'FG Item Name',
T2.PlannedQty as 'FG Planned Qty',
T2.U_OD as 'OD',
T2.U_ID as 'ID',
T2.U_OD/25.4 as 'Inches',
(T2.U_OD-T2.U_ID)/2 as 'Width',
0 as 'FG Pending Qty',
0 as 'FG Receipt Qty',
'' as 'Issue Item Code',
'' as 'Issue Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
0 as 'Issue Item - Return Quantity',
'' as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode not in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode INNER JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID, T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2
UNION ALL
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'Item Code',
T3.ItemName as 'Item Name',
T2.PlannedQty as 'Planned Qty',
T2.U_OD as 'OD',
T2.U_ID as 'ID',
T2.U_OD/25.4 as 'Inches',
(T2.U_OD-T2.U_ID)/2 as 'Width',
(Select (T2.PlannedQty - (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum))) as 'Pending Qty',
(Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum) as 'Receipt Qty',
a.ItemCode as 'Issued Item Code',
a.Dscription as 'Issued Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
(Select (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode))) as 'Issue Item - Return Quantity',
(ISNULL((Select (Select a2.DocNum from OIGN a2 where a2.DocEntry = a1.DocEntry) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode)),'')) as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode LEFT JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID,T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2,a.ItemCode,a.Dscription order by T2.DocNum desc

Hi,
Try this:
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @SCCode nvarchar(30)
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
--Rcpt from PRDN (Condition checked for Return component exclusion also)
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'FG Item Code',T3.ItemName as 'FG Item Name',T2.PlannedQty as 'FG Planned Qty',T2.U_OD as 'OD',T2.U_ID as 'ID',T2.U_OD/25.4 as 'Inches',(T2.U_OD-T2.U_ID)/2 as 'Width',case when ((T2.U_OD-T2.U_ID)/2) <30 then ((T2.U_OD-T2.U_ID)/2) *0.3 end, 0 as 'FG Pending Qty',0 as 'FG Receipt Qty','' as 'Issue Item Code','' as 'Issue Item Name',Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',0 as 'Issue Item - Return Quantity','' as 'Return Doc No',SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntryINNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCodeLEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode not in (a.ItemCode)LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode INNER JOIN OIGN d on c.DocEntry = d.DocEntryWHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID, T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2UNION ALL SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'Item Code',T3.ItemName as 'Item Name',T2.PlannedQty as 'Planned Qty',T2.U_OD as 'OD',T2.U_ID as 'ID',T2.U_OD/25.4 as 'Inches',(T2.U_OD-T2.U_ID)/2 as 'Width',case when ((T2.U_OD-T2.U_ID)/2) >=30 then ((T2.U_OD-T2.U_ID)/2) *0.37 end, (Select (T2.PlannedQty - (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum))) as 'Pending Qty',(Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum) as 'Receipt Qty',
a.ItemCode as 'Issued Item Code',
a.Dscription as 'Issued Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
(Select (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry
where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode))) as 'Issue Item - Return Quantity',
(ISNULL((Select (Select a2.DocNum from OIGN a2 where a2.DocEntry = a1.DocEntry) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode)),'')) as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode LEFT JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,
T2.PlannedQty,T2.U_OD,
T2.U_ID,T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2,a.ItemCode,a.Dscription
order by T2.DocNum desc
Thanks & Regards,
Nagarajan

How can I use more lines to show a field of a row in a report?

How can I use more lines to show a field of a row in a report? Table A have two columns: (c1 number(5),c2 varchar2(1000)).When I show the table on a report,the column c2 show itself in one row.So the width of html page is very wide.How can I split the field c2 to many lines?
Thanks for any help.

I was wondering if an answer was found for this one.
I have the same problem using the default "Look 4" template for the region. I have found in the CSS file where it is defined and it specifies "nowrap" in the style, which is why the long value is not being split over multiple lines.
So, my question is, without modifying or creating templates, is there a way to override the "nowrap" attribute from within the item definition? e.g. in the Column Attributes.Column Formatting.CSS Style field. I had some success changing the display properties, such as background colour and font size but I can't seen to override the nowrap attribute!

How to use bezier lines or curves

Similar Messages

Maybe you are looking for