How to use Building blocks ECC 6.0 for SAP implementation of FI/CO

Hi SAP gurus,
I am new to FI/CO, we are planning to implement SAP FI/CO from scratch with the client, can anyone explain me what is the procedure to be followed to implement ECC 6.0 and also let me know how to use SAP building blocks in implementation of FI/CO modules.
plz do reply me at the earliest. Thanks in advance.
Regards,
suresh

Hi,
U can check the Best Practices avaialbale based on any version
http://help.sap.com
Select Best practices
Select Baseline packages
Select the country for which u r customizing
Select business information
Select Pre-configured scenarios
Select the country
Select the module available on the right side
Regards,
Sridevi
<b>Pls. reward all useful answers</b>

Similar Messages

How do use my ITunes balance to pay for Apps

How do use my ITunes balance to pay for Apps?

You just buy what you want. If you have a credit (balance), it is automatically used before you are billed (if you run over your balance).
How to manage unused iTunes Gift Card and Gift Certificate balances
"Each time you purchase content, iTunes will deduct funds from the credit until it's depleted."

How to use same Data Type and Length for two fields

How to use same data type and length for two fields when using 'FOR ALL ENTRIES IN' in a select statement? For instance the select queries are :
SELECT bukrs gjahr belnr lifnr budat bldat zlspr dmbtr waers shkzg
FROM bsik
INTO TABLE it_bsik
WHERE bukrs = p_bukrs
AND lifnr IN s_lifnr.
IF it_bsik IS NOT INITIAL.
SELECT belnr gjahr awkey awtyp
FROM bkpf
INTO TABLE it_bkpf
FOR ALL ENTRIES IN it_bsik
WHERE belnr = it_bsik-belnr
AND gjahr = it_bsik-gjahr.
IF it_bkpf IS NOT INITIAL.
SELECT belnr gjahr lifnr xblnr
FROM rbkp
INTO TABLE it_rbkp
FOR ALL ENTRIES IN it_bkpf
WHERE belnr = it_bkpf-awkey+0(10)
AND gjahr = it_bkpf-awkey+10(4).
ENDIF.
ENDIF.
Here it gives an error in the 3rd select query that 'When you use the addition "FOR ALL ENTRIES IN itab", the fields "GJAHR" and "IT_BKPF2-AWKEY+10(4)" must have the same type and the same length.'
Kindly clarify.

Hi Saurabh,
Please see the example code that I have developed for you. It will help you solve the problem.
REPORT ZTEST_3 .
tables : BKPF.
data : begin of it_bkpf occurs 1,
         belnr type RE_BELNR,
         awkey type awkey,
         awtyp type awtyp,
         gjahr type GJAHR,
       end of it_bkpf.
data : begin of it_bkpf1 occurs 1,
         belnr type RE_BELNR,
         awkey type gjahr,              " change the data type
         awtyp type awtyp,
         gjahr type GJAHR,
       end of it_bkpf1.
data : begin of it_rbkp occurs 1,
         belnr type BELNR_D,
         gjahr type gjahr,
         lifnr type LIFRE,
         xblnr type XBLNR,
       end of it_rbkp.
select belnr
       awkey
       awtyp
       gjahr
       from bkpf
       into table it_bkpf
       where BUKRS = 'TELH'.
loop at it_bkpf.
it_bkpf1-belnr = it_bkpf-belnr.
it_bkpf1-awkey = it_bkpf-awkey+10(4).           "Here only append the required length.
it_bkpf1-awtyp = it_bkpf-awtyp.
it_bkpf1-gjahr = it_bkpf-gjahr.
append it_bkpf1.
clear it_bkpf1.
endloop.
select belnr
        gjahr
        lifnr
        xblnr
        from RBKP
        into table it_rbkp
        for all entries in it_bkpf1
        where belnr = it_bkpf1-belnr
This is just an example. Change the fields according to your requirement.
Regards
Abhii
Edited by: Abhii on Mar 9, 2011 9:08 AM

How can I see block list in skype for I phone5s

How can I see block list in skype for I phone5s

My point to the OP was that if he could see the "inboxes" in the mail app, he had to be at the main navigation point of the app. The main window of the mail app shows the Inboxes Heading and all of the inboxes for each mail account listed underneath and then the Heading - Accounts with all of the different email accounts listed under that heading.
Maybe I explained my point incorrectly. You can view the list of messages in either Landscape or Portrait view.
If you are in portrait view and there is no message selected, tap on whatever icon is shown directly below the iPad logo and the WiFi indicator and the drop down box pops up. Is that what you are asking?
Once the drop down list pops up, you can navigate in portrait like you do in landscape. In the photo below, I tapped the Trash Icon and the drop down menu popped up. Then if I tap the AOL Account, the pop up takes me back to Mailboxes which shows the list of all of your inboxes and all of the accounts underneath that.

"Case use" technique for SAP implementation?

Hello all,
has anyone used "case use" technique for SAP implementation? I mean for standard process, not only developing.
Any recommendation about it?
Thanks in advance and best regards,
Adolfo

It would be helpful to go through the help document of ASAP Methodology.
The following information may clarify some doubts/requirements you have.
Generating the Project IMG through ASAP:
After you have set the project scope, the next step is to generate the Project IMG. From the Business Process Master List (BPML), you can directly access the IMG activities relevant for configuring each process.
BPML: The Business Process Master List, along with the Business Blueprint, is a key result of the second phase of the Roadmap. Microsoft Excel tables contain the SAP scenarios, process groups, and processes that have been set in scope in the SAP Reference Structure, and are crucial for configuring your SAP System. In Realization, the third phase of the Roadmap, the BPML provides the basis for monitoring and steering test activities and for configuring your SAP System. It contains the titles of the structure items, and displays the status, the owner, links to documentation and links to the SAP System. Amongst other things, the BPML allows you to:
1) Set your baseline and final scope. These are used for baseline and final configuration.
2) Access the Project IMG and specific IMG activities assigned to structure items.
3) Access integration test plans, which help you carry out all required integration tests.
The Prerequisite is you have set the project scope.
Process Flow to use the Business Blueprint as a basis for configuring your SAP System:
1) Set the project scope.
2) Generate the Project IMG.
3) Generate the BPML.
4) From a specific processes in the BPML, you can go to the relevant IMG activities and make Customizing settings.

How to reproduce Building Blocks Synth apple loop

hi, a very specific question that you cant answer unless you listen to sample in question - a sample in LPX apple loops called Building Blocks Synth. There is a bass line and a recurring synth chord which closes out every time it appears I think with some kind of filter effect - a bit like a closing hi hat on a plucky synth - a sound I just think is fantastic, but for the life of me cannot work out how it is done. If you get a chance can you cast your expert ear and for those experts , let me know how you think you get the synth sound and effect. You can hear it better if you copy into a track and boost the high end and low end EQ .
I would not normally ask such a question on here but it is bugging me and I could spend my life looking at tutorials to try and work out what it is but not get there.
Many thanks in advance for anybody who takes the time to listen to it.
A related question if anyone happens to know: if I include the loop in a song and successfully commercialise it, is it royalty fee?

I have a a problem a bit like the one described previously.
In Set. 2007 I bought my first mac...an iMac 24".
3-4 months later I had trouble with my HD. The tech support told me that my HD was damaged and could not be fixed. They couldn`t explain why, but they changed my old HD with a new one and problem solved.
Last month as I was installing the snow leopard operating sistem my iMac froze in the midle of the instalation procedure. I turned it off holding down the power button, and when I turned the power back on I got that flashing folder with a question mark in the middle. In short...after trying everything (formating, partitioning etc) I took it to the shop to hava a look.
The tech guy just got off the phone with me saying that my HD was damaged and could not be repaired. The only solution is to replace it with a new one.
In 2 years I had to change 2 HD`s!!!!
My only guess is that bootcamp might have something to do with it cause it frooze the computer lots of times requiring me to turn it off by pressing and holding down the power button one to many times.
Does anybody know any other reason for this to have happended?
Could the installation of snow leopard have had anything to do with this?

How to use anonymous block in select statement

Hello Experts.
I have one requirement which i can resolve using anonymous block in plsql. But i want implement it in select query only.
Database: Oracle 11.2.0
select count(*) from emp where name='xyz' and sal=50
if count(*)>0
then
select dept,sector from emp where name='xyz' and sal=50
here i dont have any primary key.
How can i achieve above using sql query not plsql. Here is one sloution which i have got but its not satisfying above requiremnt as i dont have any primary key columns
select toll_number from toll_details
where toll_id =(select toll_id from toll_details where toll_new_id='5263655214' group by toll_id having count(*)>0)
here toll_id is primary key, so used group by. But how to do this in my above requirement as i dont have primary key.
Appreciate any help on this.
Thank you

897112 wrote:
Hello Experts.
I have one requirement which i can resolve using anonymous block in plsql. But i want implement it in select query only.
Database: Oracle 11.2.0
select count(*) from emp where name='xyz' and sal=50
if count(*)>0
then
select dept,sector from emp where name='xyz' and sal=50
here i dont have any primary key.
How can i achieve above using sql query not plsql. Here is one sloution which i have got but its not satisfying above requiremnt as i dont have any primary key columns
select toll_number from toll_details
where toll_id =(select toll_id from toll_details where toll_new_id='5263655214' group by toll_id having count(*)>0)
here toll_id is primary key, so used group by. But how to do this in my above requirement as i dont have primary key.
Appreciate any help on this.
Thank youTry this
SQL> create table plch_test(id number,name varchar2(20),sal number);
Table created.
SQL> insert into plch_test values(1,'XYZ',50);
1 row created.
SQL> insert into plch_test values(2,'AAA',100);
1 row created.
SQL> insert into plch_test values(3,'BBB',200);
1 row created.
SQL> insert into plch_test values(4,'CCC',400);
1 row created.
SQL> commit;
Commit complete.
SQL> select * from plch_test;
        ID NAME                        SAL
         1 XYZ                          50
         2 AAA                         100
         3 BBB                         200
         4 CCC                         400
SQL> ed
Wrote file afiedt.buf
1 select id,name
2 from plch_test a
3 where 1=(select count(*) from plch_test b where a.id=b.id)
4* and id=&id
SQL> /
Enter value for id: 2
old   4: and id=&id
new   4: and id=2
        ID NAME
         2 AAA
SQL> /
Enter value for id: 0
old   4: and id=&id
new   4: and id=0
no rows selectedHope this helps!!!
Regards,
Achyut

Using Building Blocks

Hi all,
I've installed all the steps of a building block, Sales Analysis, as well as completed the various data loads. I can see data in the info cubes but the queries themselves don't seem to work. Looking at the Credit Memo query, I see that it has static filters applied. The various selection options are showing my company data. Looking at the info cube, I do see data with these filter criteria so I'm at a loss as to why no data is returned. Any suggestions on how to trace the issue?
Also, I wanted to try changing a query to remove the static filters but when I try to edit it, I get an error message "Maintenance of object XXXX of type query is not yet available. Further note is "Manually start the maintenance transaction for objects of type Query". Where/how is that done.
Thanks in advance for any assistance.
Tom

Hi Tom,
It could be because of SAP standard sales analytic info cube delivered with K4 financial variant setting default and you are trying to load the data with other variant like V3 and others.
Check the setting in info cube >change mode> time dimension> click on financial variant> provider specific setting> allow all data from info object.
Check this setting and then see the data on report.
Best of luck.
Rgs,
Ambuj Kathuria
Global Practice Head - BI / ILM

How to avoid Build Array function inside a For (while) Loop?

Hi there,
I have a simple question about how to avoid using Build Array function inside the loop. Now I want to remove the Build Array funtion inside the loop to improve the performance (To get better memory management). Any idea how to do that?
Thanks a lot!
Warmest regards,
Chong

It's been my experience that using the auto-indexing to build an array
on a For loop is just as good as initializing and replacing elements.
The For loop knows before it runs how many iterations it has to run and
can allocate the array ahead of time.
You're better off initializing and replacing when using a While loop
because it does not know how many iterations it will run and can't
pre-allocate the array ahead of time.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

** How to use TO_DATE function in Stored Proc. for JDBC in ABAP-XSL mapping

Hi friends,
I use ABAP-XSL mapping to insert records in Oracle table. My Sender is File and receiver is JDBC. We use Oracle 10g database. All fields in table are VARCHAR2 except one field; this is having type 'DATE'.
I use Stored procedure to update the records in table. I have converted my string into date using the Oracle TO_DATE function. But, when I use this format, it throws an error in the Receiver CC. (But, the message is processed successfully in SXMB_MONI).
The input format I formed like below:
<X_EMP_START_DT hasQuot="No" isInput="1" type="DATE">
Value in Payload is like below.
<X_EMP_START_DT hasQuot="No" isInput="1" type="DATE">TO_DATE('18-11-1991','DD-MM-YYYY')</X_EMP_START_DT>
Error in CC comes as below:
Error processing request in sax parser: Error when executing statement for table/stored proc. 'SP_EMP_DETAILS' (structure 'STATEMENT'): java.lang.NumberFormatException: For input string: "TO_DATE('18"
Friends, I have tried, but unable to find the correct solution to insert.
Kindly help me to solve this issue.
Kind Regards,
Jegathees P.
(But, the same is working fine if we use direct method in ABAP-XSL ie. not thru Stored Procedure)

Hi Sinha,
Thanks for your reply.
I used the syntax
<xsl:call-template name="date:format-date">
<xsl:with-param name="date-time" select="string" />
<xsl:with-param name="pattern" select="string" />
</xsl:call-template>
in my Abap XSL. But, its not working correctly. The problem is 'href' function to import "date.xsl" in my XSLT is not able to do that. The system throws an error. Moreover, it is not able to write the command 'extension-element-prefixes' in my <xsl:stylesheet namespace>
May be I am not able to understand how to use this.
Anyway, I solved this problem by handling date conversion inside Oracle Stored Procedure. Now, its working fine.
Thank you.

How to use tree tables with CRUD operation for begineers ADF 11g

This is Friday night call for help.
This is only few sample ressources on the web for tree table and only one with CRUD operation.
I used this one http://jobinesh.blogspot.com/2010/05/crud-operations-on-tree-table.html because this is the only one that address CRUD.
And it is shaky. Deletion works fine but insertion not very well. This is working using custom code provided below.
Depending if the user selection in the tree, the code insert from the master node to the children node.
Any other options because it is not working well.
Also where Oracle describes how to use the row, rowset, itorator API? This is really hard to understand like almost if we should not use it.
then if not how can I insert in tree with two nodes and insert in the parent or children depending the users selection.
Lately I 'been posting questions on this forum with no response. This hurts. I understand developers cannot spend their time on this but People from Oracle, please help. We pay licenses...
public void createChildren(RowIterator ri, Key selectedNodeKey) {
final String deptViewDefName = "model.DepartmentsView";
final String empViewDefName = "model.EmployeesView";
if (ri != null && selectedNodeKey != null) {
Row last = ri.last();
Key lastRowKey = last.getKey();
// if the select row is not the last row in the row iterator...
Row[] found = ri.findByKey(selectedNodeKey, 1);
if (found != null && found.length == 1) {
Row foundRow = found[0];
String nodeDefname =
foundRow.getStructureDef().getDefFullName();
if (nodeDefname.equals(deptViewDefName)) {
RowSet parents =
(RowSet)foundRow.getAttribute("EmployeesView");
Row childrow = parents.createRow();
parents.insertRow(childrow);
} else {
RowSet parents =
(RowSet)foundRow.getAttribute("EmployeesView");
Row childrow = parents.createRow();
childrow.setAttribute("DepartmentId",
foundRow.getAttribute("DepartmentId"));
parents.insertRow(childrow);
} else {
System.out.println("Node not Found for " + selectedNodeKey);
}

I am looking for a sample that describe how to design a jsf page with a tree table.
So you have Department and employees. In the tree first comes Department and if you click the node you see the employees assigned to this department.
I need to be able to insert a new department or a new employee from the tree table by clicking on a insert button in the panel collection toolbar depending on user selection in the tree.
I got part of it working but not good enough.
By problem is the get insertion working
I have a createChildren method in my AM implementation that get in input a RowIterator and selected node key.
To goal is to create new records depending of the user selection and the input parameters get populated by the binding like this:
#{backing_treeSampleBean.selectedNodeRowIterator} #{backing_TreeSampleBean.selectedNodeRowkey} via method binding with parameters.
Is it the right approach?
First to be able to insert a parent record, I select nothing in the tree and ri and selectedNodeKey comes to null
we run this code
ViewObjectImpl vo = getSchHolidaySchedExceptionsView1();
//ViewObjectImpl vo = getDepartmentsView1();
Row foundRow = vo.first();
Row childrow = vo.createRow();
vo.insertRow(childrow);
A new blank entry appears in the parent node and we enter a value.
The the problem starts when we want to add a child to this parent.
We select the created parent and press the insert button, this code get executed
if (nodeDefname.equals(deptViewDefName))
//list of the children of the parent and create an new row
RowSet childRows = (RowSet)foundRow.getAttribute("SchHolidayExceptionDatesView");
Row childrow = childRows.createRow();
childRows.insertRow(childrow);
But the new entry does not appear, it is almost like it would be created for a different parent because this is a mandatory field that is not feel in yet and the interface complaints of a missing value. It is created somewhere just not a the right place... This is my guess.
Do you see something wrong with the code?
The full code og my create children method is there below
I am using jdeveloper 11.1.1.3.0 any issues with tree table to know about with this version?
Thanks for your help
public void createChildren(RowIterator ri, Key selectedNodeKey) {
final String deptViewDefName = "com.bcferries.app.pdfroutesched.model.SchHolidaySchedExceptionsView";
final String empViewDefName = "com.bcferries.app.pdfroutesched.model.SchHolidayExceptionDatesView";
if (ri != null && selectedNodeKey != null) {
// last row
Row last = ri.last();
Key lastRowKey = last.getKey();
// if the select row is not the last row in the row iterator...
Row[] found = ri.findByKey(selectedNodeKey, 1);
if (found != null && found.length == 1) {
// foundRow is the row selected
Row foundRow = found[0];
// The row selected can be the parent node or the child node
String nodeDefname = foundRow.getStructureDef().getDefFullName();
// if parent row
if (nodeDefname.equals(deptViewDefName))
//list of the children of the parent and create an new row
//works but we try to resolve the creation of a parent
RowSet childRows = (RowSet)foundRow.getAttribute("SchHolidayExceptionDatesView");
Row childrow = childRows.createRow();
//childrow.setAttribute("HolidayDate", new java.util.Date().getDate());
System.out.println("insert child row from master");
childRows.insertRow(childrow);
} else
//RowSet ParentRow = (RowSet)foundRow.getAttribute("SchHolidaySchedExceptionsView");
//RowSet childRows = (RowSet)ParentRow.first().getAttribute("SchHolidayExceptionDatesView");
Row childrow = ri.createRow();
System.out.println("insert child row from child ");
} else {
System.out.println("Node not Found for " + selectedNodeKey);
} else {
System.out.println(" param null try creating for first row : " +
ri + " * " + selectedNodeKey);
ViewObjectImpl vo = getSchHolidaySchedExceptionsView1();
Row foundRow = vo.first();
Row childrow = vo.createRow();
vo.insertRow(childrow);
}

Where can I find out how to use the Journals feature in iPhoto for iPhone

I am new to Apple Support Communities. Not sure if this is the place that will help me work with Journals. Is there a manual or video which helps with teaching the features of the Journals application and how to use them? I am stuck knowing how to move around the images and changing the page set-up, among other perplexing features.

You need the iPhoto for iOS forum is here
https://discussions.apple.com/community/app_store/iphoto_for_ios
Regards
TD

I just got a new ipod and i dont know how to use it. it keeps asking me for wifi connection or to log on to itunes. i logged on to itunes but its still not working please help

please help me use my ipod touch. i just got it and im a little confused on how to use it. it keeps asking for a wifi connection even while im logged in on itunes

iPod touch User Guide (For iOS 5.1 Software)
Are you connected to wi-fi?
If not, then connect.

How to use a TOP INCLUDE of my_function_module for/into my_report?

Hello Experts,
I put the below code in my_function_module
PERFORM my_routine
IN PROGRAM my_report_prog
USING xyz.
Now, i want to use the TOP INCLUDE/Data declaration part of my_function_module for/into my_report_prog, because i do not want to declare all again.
Pls. let me know how to use a TOP INCLUDE of a my_function_module for/into my_report?
Thank you

Hi,
I think we can directly use the include using INCLUDE stat.
Go to your function group get the top include name
and use it in your report.
Thanks,
Anmol.

How to use a package as an interface for doing DML on a tabular region?

Hello,
I want to build a page to perform DML. However, I want to use a package containing the procedures for the select, insert, update and delete statements. The reason is that there is a one-to-many relationship between the table shown on the screen and the tables in the database.
When the page is first displayed, I want to call the SELECT procedure.
When the user is done with their changes, I want to loop through the rows and perform
the DELETE procedure on all the deleted rows and
the UPDATE procedure on each modified row.
What is the easiest way to do this?
Where do I start reading/learning?
Thanks,
Gabor

Hi Gabor,
If you base your Tabular Form on a database view, you can use an INSTEAD OF trigger to invoke your package. Have a look at this article, which describes this technique with some example code:
http://rokitta.blogspot.com/2009/12/tabular-forms-on-complex-views-using.html
regards,
Christian

How to use Building blocks ECC 6.0 for SAP implementation of FI/CO

Similar Messages

Maybe you are looking for