How to use Control Key with other key as Ctrl+C

I am using this code to access Shift key + C
addKeyListener(new KeyAdapter()
public void keyPressed(KeyEvent KEv)
if(KEv.isShiftDown() && (KEv.getKeyCode() == KEv.VK_C))
//Shift + C key down
Please tell me how to do with Control Key?
Vishwajeet

addKeyListener(new KeyAdapter()
public void keyPressed(KeyEvent KEv)
if(KEv.isControlDown && (KEv.getKeyCode() == KEv.VK_C))
//Cntrl + C key down
//if u want to create a key stroke for keys with contrl combination use CTRL_MASK.

Similar Messages

Satellite A210 - How to use muldimedia buttons with other than Media Player

Hi,
is it really not possible to use the Multimedia Buttons (Play, Pause, FF) on the top of my notebook for another application than the Windows Media Player?
Is there any reason for this? I would like to control Winamp with this buttons.
It seems quite sensless to restrict the acces to ONE application of HUNDREDS available, an then this one is the Media Player which is not used by the most people.
I have the Satellite A210 Notbook.
Can you tell my how to control my winamp with this buttons?
Greetings from Robert

Hello Robert
Unfortunately there is no solution at the moment. If you check this forum you can find several very interesting threads about multimedia buttons and Winamp player. The fact is that some people have found solution for older notebook models running WXP. Winamp has offered plugin that must be installed.
Now we have new situation. Your notebook runs newest Vista OS and I didnt find any plugin that can help. Problem is that your notebook is designed for Windows Vista and preinstalled OS contains all necessary plugins for running Windows media player as a part of preinstalled operating system.
It is no kind of restriction. With preinstalled OS you can do what you want and if you can find a way to change it do this. You know very well that there are hundreds of different players on the market. You cannot expect that Toshiba take a time and create a plugins for all of them and satisfy the customers all over the world.

How to use java output with other application

hi ,
I am using acme.crypto to encrypt data. this is completely written in java. i need to pass input to this using VB6 and return the output to VB6
how can i achieve the same, is there any readily available dll that can be used in vb?
I am rigorously searching solution, which i am not finding.
I need to know how should i place the java code so that it could be used with VB, as i am new to java world. Do i need to create component using java bean or how?
The code i refered above is nothing but encryption algorithm. I need to pass the input string from vb to java, which will process me the output which inturn should be passed to vb6.
Kindly guide me through this.

Why not create a Java ServerSocket in your Java program.
Connect the VB program to this ServerSocket.
Send the input to the Java Program over this socket and have the Java Program encrypt the information and pass it back on the same socket.
Don't know how hard Sockets are in VB6 but a Server Socket in Java is simple.
No need for new DLLs, JNI, etc.

How to use the TeamViewer with other iViews

Hi,
I would like to use some own developed iViews together with the TeamViewer. We are using the iViews in ESS already and now the question is, how can we link them to the TeamViewer?
We are running EP6 Patch2 HF4.
Thanks
Bianca

Hi.
Just add the teamviewer to the "dynamic navigation" of your iview.
Register listeners for the teamviewer events, and also call the teamviewer on init to get the selected person.
I've found that the teamviewer doesn't always respond (only once the first time it's loaded), then you should check a cookie value.
I'll update this post later with more exact info on the teamviewer event's etc.
Regards, Mikael

How we use Surrogate Keys for snowflake dimension

Hi All,
my question is - How we use Surrogate Keys for snowflake dimension
i heard from some body Surrogate Keys only work with star schema.
please correct me if i wrong.
Regards,
Manish

Hi manishcal16PPS,
According to your description, you can only create natural key in your dimension. But it's not working when using surrogate key. Right?
In Analysis Services, the snowflake schema of the dimensions are represented by more than one dimension table in other words its takes multiple dimension tables to define a dimension. Surrogate key are just some extra, redundant, unique key based on the
natural key. So there's no direct relationship or some limitations between surrogate keys and snowflake schema.
In this scenario, since there's relationship between the two dimensions, you should create natural key. For using natural key or surrogate key. Please refer to an article below:
Surrogate Key vs. Natural Key
For understanding star/snowflake schema, please see:
Understanding Star and Snowflake Schemas
Regards,
Simon Hou
TechNet Community Support

How to Use "Hot Key" in the Search help

Hi,
Please explain how to use hot key with some example.

TYPE-POOLS SLIS. DATA: BEGIN OF itab OCCURS 0,
        BUKRS LIKE T001-BUKRS,
        BUTXT LIKE T001-BUTXT,
      END   OF itab.
PARAMETERS: P_BUKRS TYPE BUKRS.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_BUKRS.
PERFORM F4_FOR_BUKRS.
FORM F4_FOR_BUKRS.   DATA: IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
        ES_SELFIELD TYPE SLIS_SELFIELD. * Get data
SELECT BUKRS
         BUTXT
         FROM T001
         INTO TABLE itab
         up to 10 rows .
Get field
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
       EXPORTING
            I_PROGRAM_NAME     = SY-REPID
            I_INTERNAL_TABNAME = 'ITAB'
       CHANGING
            CT_FIELDCAT        = IT_FIELDCAT[].   LOOP AT IT_FIELDCAT.
    IT_FIELDCAT-KEY = SPACE.
    IF IT_FIELDCAT-FIELDNAME = 'BUTXT'.
      IT_FIELDCAT-EMPHASIZE = 'C710'.
      IT_FIELDCAT-HOTSPOT = X.
    ENDIF.
    IF IT_FIELDCAT-FIELDNAME = 'BUKRS'.
      IT_FIELDCAT-EMPHASIZE = 'C610'.
    ENDIF.     MODIFY IT_FIELDCAT.
ENDLOOP.   CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
    EXPORTING
I_TITLE                       = 'THIS IS FOR F4 IN COLOR'
      I_TABNAME                     = 'ITAB'
      IT_FIELDCAT                   = IT_FIELDCAT[]
    IMPORTING
      ES_SELFIELD                   = ES_SELFIELD
    TABLES
      T_OUTTAB                      = ITAB . ENDFORM.                    " F4_FOR_BUKRS

How to use a key file in the FTP Task using and SSL connection

In the past I have used this code to set the FTP pass word in an FTP component task in SSIS.
Does anyone know how to use a Key file in an SSL connection to download a file from an FTP site? If not can you tell me where I can get the C# code examples to learn how to create a script task or if there is another way in SSIS to download large files
from an SSL FTP site? Thank you for any help offered.
public void Main()
ConnectionManager FTPConn;
FTPConn = Dts.Connections["FTPServer"];
FTPConn.Properties["ServerPassword"].SetValue(FTPConn, Dts.Variables["FTPPassword"].Value);
Dts.TaskResult = (int)ScriptResults.Success;
Antonio

You can use SFTP for this.
This is a way of implementing SFTP in SSIS using standard tasks
http://visakhm.blogspot.in/2012/12/implementing-dynamic-secure-ftp-process.html
also see
http://blog.goanywheremft.com/2011/10/20/sftp-ftps-secure-ftp-transfers/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Documentation How to use Virtual Key fig.

Hi all ,
Can u please send me Documentation How to use Virtual Key fig. to [email protected]
Nice weekend.

check this doc to get a headsup on Virtual objects - though the doc talks abt the virtual char, the procedure is pretty much similar to KF too.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20use%20variable%20time%20references%20in%20currency%20conversion
How to implement Virtual Characteristics or Virtual key figures

How can I share photos with others in other places using ICloud?, How can I share photos with others in other places using ICloud?

How can I share photos with others in other places using ICloud?

If you have iPhoto on an iOS device rather than a Mac, you can create a 'Photo Journal', which is an online gallery hosted on iCloud: details here -
http://help.apple.com/iphoto/ipad/1.0/#blnkaf3ef70a
This facility is not as yet available in iPhoto on a Mac. If you don't have an iOS device you will need to find a third-party alternative. This page examines some options:
http://rfwilmut.net/migrate4

How should i share file with other devices such as nokia,blackberry and etc using bluetooth

I want to share files between other deivce such as nokia but couldnt, could u help me tell how can i share files with other devices???

@AKRBTN: Thanks for the reply and info.
That is a solution, but it really isn't viable.
It is sad that apple refuses to support this.
A simple example: Sitting somewhere with no signal and you want to share a file (photo) with your colleague or friend, who happens to be right next to you.
Or even if there is signal and you don't want to be paying fees or data charges.
Or you may be in a rehearsal studio and need to share that very important file and have no time to go outside and get signal and try to send the file, which then everyone else has to go outside and catch the signal and pay fees.
Anyway, I see that this is a dead end with apple, so I guess I will be back to carrying 2 phones around again.
Peace,
SB

How to use Oracle partitioning with JPA @OneToOne reference?

Hi!
A little bit late in the project we have realized that we need to use Oracle partitioning both for performance and admin of the data. (Partitioning by range (month) and after a year we will move the oldest month of data to an archive db)
We have an object model with an main/root entity "Trans" with @OneToMany and @OneToOne relationships.
How do we use Oracle partitioning on the @OneToOne relationships?
(We'd rather not change the model as we already have millions of rows in the db.)
On the main entity "Trans" we use: partition by range (month) on a date column.
And on all @OneToMany we use: partition by reference (as they have a primary-foreign key relationship).
But for the @OneToOne key for the referenced object, the key is placed in the main/source object as the example below:
@Entity
public class Employee {
@Id
@Column(name="EMP_ID")
private long id;
@OneToOne(fetch=FetchType.LAZY)
@JoinColumn(name="ADDRESS_ID")
private Address address;
EMPLOYEE (table)
EMP_ID FIRSTNAME LASTNAME SALARY ADDRESS_ID
1 Bob Way 50000 6
2 Sarah Smith 60000 7
ADDRESS (table)
ADDRESS_ID STREET CITY PROVINCE COUNTRY P_CODE
6 17 Bank St Ottawa ON Canada K2H7Z5
7 22 Main St Toronto ON Canada L5H2D5
From the Oracle documentation: "Reference partitioning allows the partitioning of two tables related to one another by referential constraints. The partitioning key is resolved through an existing parent-child relationship, enforced by enabled and active primary key and foreign key constraints."
How can we use "partition by reference" on @OneToOne relationsships or are there other solutions?
Thanks for any advice.
/Mats

Crospost! How to use Oracle partitioning with JPA @OneToOne reference?

How to use NODIM func with out it's values being rounded

I created a new calculated key figure in Query Designer 3.x, and used the function NODIM() - Value with out dimensions. When I use this function, the values are rounding off to the nearest value.
For example, I have a value 0.000075 US$, when I use NODIM function the value is displayed as 0.000080. Value is getting rounded to nearest value.
I tried using absolute value it did not work.
Can any one tell me how to use NODIM function with out it's value being rounded to nearest value.
Thanks,

Hi,
According to your description, you might want that "Notice" field has a default value when form is created and users can be able to change the value of that
field.
As a workaround, you can add an action rule in “Name” field via InfoPath to fill the default value in “Notice” field only when “Name” field is not blank and “Notice”
field is blank.
Settings of the rule are as below, you can modify it based on your need:
Here is a link about how to add an action rule in InfoPath form, you can use it as a reference:
https://support.office.microsoft.com/en-us/article/Add-rules-for-performing-other-actions-5322d726-b787-4e5f-8d37-ba6db68b451d?CorrelationId=8a64c12f-aa60-4d90-b1f9-a44fcc4e74b5&ui=en-US&rs=en-US&ad=US
Best regards
Patrick Liang
TechNet Community Support

HT1343 how to use the options with F10, F11, F11 for turning the sound up or down or mute?

Hi, I'm Hannah. I'm using a Mac. Can you show me how to use the options with F10, F11, F12 for turning the sound up, or down or mute? Thank you very much

Normally simply pressing them should do what you want, F10 to mute; F11 to decrease volume; F12 to increase volume. However, it's possible that you have a box ticked in Keyboard preferences which modifies the behaviour of the keys, requiring you to also hold down the Fn key (bottom left key on the keyboard) to enable the function.
Check System Preferences>Keyboard to makes sure the box indicated in the image isn't ticked.

How to use my itunes with a new pc

how to use my itunes with a new pc?

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
tt2

How to use the namespace with a parser?

I want to use the namespace in my project. For this reason, I use a sample
from
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/sax/7b_pe.html
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/dom/5_ns.html
to test my understanding.
The slideshow2.dtd refer to the definition in 'xhtml.dtd'. Because in these
two files, they all use the 'title' as the element names. To solve these
conflicts, The namespace is used to qualified the one in slideshow2.dtd.
But the parser still complain that the 'title' in slideshow2.dtd is declared
more than once.
I use apache's Xerces.
I want to know if Xereces realy support namespace spec. now, or how to use
the namespace with a parser. Can anyone kindly tell me where to find some
material that demo the use of namespace in Java program.
Thanks for any help!!!
#############FILE: slideshow2.dtd ###############
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT slideshow (slide+)>
<!ELEMENT slide (title?, item*)>
<!ENTITY % xhtml SYSTEM "xhtml.dtd">
%xhtml;
<!ELEMENT title (#PCDATA)*>
<!ATTLIST title
xmlns CDATA #FIXED "http://www.example.com/slideshow"
>
<!ELEMENT item (#PCDATA)>
##############FILE: xhtml.dtd #########################
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT html (head)>
<!ATTLIST html
xmlns CDATA #FIXED "http://www.example.com/xhtml"
>
<!ELEMENT head (title,style*)>
<!ELEMENT title (#PCDATA)>
<!ELEMENT style (#PCDATA)>
#############FILE: slideshow.xml ####################
<?xml version='1.0' encoding='utf-8'?>
<!DOCTYPE slideshow SYSTEM "slideshow2.dtd">
<slideshow>
<slide>
<title xmlns="http://www.example.com/slideshow">Wake up to
products!</title>
</slide>
</slideshow>

I want to use the namespace in my project. For this reason, I use a sample
from
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/sax/7b_pe.html
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/dom/5_ns.html
to test my understanding.
The slideshow2.dtd refer to the definition in 'xhtml.dtd'. Because in these
two files, they all use the 'title' as the element names. To solve these
conflicts, The namespace is used to qualified the one in slideshow2.dtd.
But the parser still complain that the 'title' in slideshow2.dtd is declared
more than once.
I use apache's Xerces.
I want to know if Xereces realy support namespace spec. now, or how to use
the namespace with a parser. Can anyone kindly tell me where to find some
material that demo the use of namespace in Java program.
Thanks for any help!!!
#############FILE: slideshow2.dtd ###############
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT slideshow (slide+)>
<!ELEMENT slide (title?, item*)>
<!ENTITY % xhtml SYSTEM "xhtml.dtd">
%xhtml;
<!ELEMENT title (#PCDATA)*>
<!ATTLIST title
xmlns CDATA #FIXED "http://www.example.com/slideshow"
>
<!ELEMENT item (#PCDATA)>
##############FILE: xhtml.dtd #########################
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT html (head)>
<!ATTLIST html
xmlns CDATA #FIXED "http://www.example.com/xhtml"
>
<!ELEMENT head (title,style*)>
<!ELEMENT title (#PCDATA)>
<!ELEMENT style (#PCDATA)>
#############FILE: slideshow.xml ####################
<?xml version='1.0' encoding='utf-8'?>
<!DOCTYPE slideshow SYSTEM "slideshow2.dtd">
<slideshow>
<slide>
<title xmlns="http://www.example.com/slideshow">Wake up to
products!</title>
</slide>
</slideshow>

How to use Control Key with other key as Ctrl+C

Similar Messages

Maybe you are looking for