How to use Currency Conversion
Hi.
Caf.core has a service called CurrencyConversion.
How to use that service in java webdynpro since I could'nt find any interface or class for it.
Regards
Bala
Hi Som.
Have you ever tried this currencyConversion service as per in the document.
I followed the same implementation to create a application service for Exchange Rate. But I could'nt able to execute the service. Do you have any sample code to use the service getExchangeRate in our code?
Thanks
Bala
Message was edited by:
Balachandar P
Similar Messages
-
Using currency conversion and text variable at the same time
Hi all,
In a 3.5 bex query, i am applying currency conversion on a key figure with a variable of 0currency.
as i know, to be able to apply currency conversion, variable of currency should not be in Free characteristics or in Filter.
it has to be selected only on the key figure.
but now, i want to use text variable for selected currency (with type replacement path). But as i know, to be able to use text variable, variable of currency has to be
in Free characteristics or in Filter.
Can you please advise, how to both use currency conversion and text variable on currency?
Thanks in advance.
SanchoSancho,
I'm not 100% sure about this, but I'm thinking that if you are pulling the text variable from a selection in a structure, you should not need it in the free characteristic or filter. Try creating a structure, placing the currency in it as a selection, and creating a text variable as the title for the selection that is based on the currency. This may help.
Cheers,
Rusty -
Currency Translation Type in queries using currency conversion
I have a question on the Currency Translation Type (EUR_VAR) that is used in all of the queries using currency conversion on the fly. (currency is maintained automatically nor in table.)
User wants to use 2 different exchange rates in a single query. The months in 2010 (Actuals) are to
be converted using Xchangerate-type EURO and the months in 2011 (Planned) to use Xchangerate-type USD.
But store different rates with different starting dates. This is however not possible because the Currency Translation
Type is set-up (1) to work with Query Key date - rather than a characteristic in the data and (2) apparently these
currency translation types only work with time characteristics like 0fiscyear
My idea is therefor to:
1. Create a new variable (similar to EXC_RATE) to prompt for a 2nd Exchange Rate type when query starts
2. Create a new Currency Translation Type (next to EUR_VAR), referencing the new variable or sticking to fixed Xrate type, fixed to EUR
Is this possible to create Idea (2)
Many Thanks in Advance.The best way would be to create two curr conversion types , one converting to EUR and other to USD .Put them in properties of coressponding KFs in query.For timref in RSCUR , variable time ref can be used individually for two conv types.
-
How to use content conversion for Complex structure
Hi All,
I want to know how to use content conversion for the following complex structure:
Data
...Details 1 to Unbound
.....Header 1 to 1
.......HF1
.......HF2
.......HF3
.......ITEM 1 to unbound
.........ITF1
.........ITF2
all are of type string.
Thanks & Regards,
Viswanath
Message was edited by: Viswanath MenteHi,
In the content conversion,
give ur
1.document name as message type
2.give ur recordstructure as Details,,Header,1,ITEM,
3.mention ur keyfield.
conversion parameter
Header.fieldFixedLength - give the field lengths
Header.fieldNames=mention all the field name
Header.keyField=enter the value of keyfield
Header.endSeparator='nl'
repeat the same for Item
regards
jithesh -
How to do currency conversion in Business objects
Hi,
Can any one please let me know how to do currency conversion, As I am getting different types of currencies. So I want to do currency conversion.
Regards
Sankar ReddyHi Sankar,
you could easily setup a variable for the actual currency and the actual currency conversion routine in the BI query and the BusinessObjects tools would then leverage the BI variables
Ingo -
How to use currency infoobject
Hi SAP Gurus,
Can u please tell me how to use currency infoobject.I have already created currency key figure ,by assigning fixed currency INR.but what to do while transformation and datasource?Do i need to use any rule in transformation?
Please tell me.
Regards
MeenuHi,
Thanks for the solution.But I am unable to use fixed currency info objects.The scanario is:
In Infoobjects: i have 4 characterstics i.e Mat Number,Mat Name,Mat description and 1 key figure i.e Zprice which has fixed currency INR.
In my flat file there are 5 fields: Mat Number, Mat Name,Mat Description,Price and Currency
When I run PSA it executes fine except Currency field is blank and when I run infocube I don't even get currency field, but get the data for rest of the field.
Also, In transformation,rules detail I have assigned fixed currency as INR.
please tell me what do i need to do to get all the records in infocube.
Regards
Meenu -
BEX - Using Currency Conversion
Hi All,
I have a report requirement to convert a Key Figure Amount from currency EURO into USD.
E.g Sales amount 100 is reported in euro, this needs to use a conversion rate to show it in USD instead.
I have created a DSO with the exchange rates for use with query designer.
How do I set this up in the Query Designer? Please be specific.
Thanks
Flash1 Go to transaction RSCUR
2 Create a currency translation key, provide a technical name and description with which you can identify it
3 Under the Exchange Rate tab, provide details about the exchange rate type that you need to use. Generally companies have
many different exchange rate types like for example, month end accounting rate, month beginning rate, budget rate, average
rate, historical rate etc. Select the one which best suits the user requirements
4 Under the currency tab you can provide details about source and target currency. If in your case it is always going to be EURO
to USD conversion, you can fix it or you can provide a variable which would take input from the user and accordingly convert it
5 Under time reference tab, you can provide a fixed time reference or a variable time reference using a standard infoobject
6 You can use this currency translation key in the required key figures in the report to enable currency conversion
Once this is done, you can request the design authority and BASIS team to maintain the required conversion factors between different currencies and exchnage rate types in SPRO >SAP Netweaver>Currencies
Kindly award points if you find this information to be useful
Best Regards,
Sameer -
How to move currency conversion types
Dear All
my problem is currency conversion types and fixed&target currency is showing development but in production its not showing aft i came to know i hav to move
currency conversion types to production. i checked in rscur tcode where i got this list here i cant understand which currency type i hav to move
1.0HRFIXCUR Fixed Target Currency, Current Date
0MEANDAILY Middle rate using exact days
USD_VAR usd with var rate
VAR_ALL Multiple Curencies
ZCC01 Cost Center
ZCUR_1 Target currency type
ZCUSTTR Local currency
ZNEWCUR New Currency Type
ZTEST1 Conversion currency translation
2.in development i hav seen currency variables are there but for the same i hav checkded production currency variables are not there
its mandatory to move currency variables also production
iam in bi7 sp13 actually previously its working we applied some patches in r/3 fi then only we are facing this problem
can you please help me to close this issure
thanx for allplease close this thread and see the other one...
-
How to use currency format set
Hi All,
I have to use currency format set to mask the amount values to their respective currencies ,
i reviewed the Oracle XML Publisher Administration and Developer's Guide and followed all the steps mentioned there ,i m also quoting the same over here
To define a Currency Format Set:
1. Navigate to the Currencies page under the Administration tab. Select Create
Currency Format Set.
2. Enter a Name and a Code for the set. The Code is a unique identifier and cannot be
changed later. Select Apply.
3. The Currency Formats page will display for your newly created set.
To add currency formats to the Currency Format Set:
1. Select Add Currency Format to add a format to your set.
2. Select a Currency Name from the list.
Note: This list is generated from the FND currency table and
should include all ISO currencies. Additional currencies can be
added from the System Administrator responsibility.
3. Enter the Format Mask you wish to use for this currency and select Apply.
The Format Mask must be in the Oracle number format. The Oracle number format
uses the components "9", "0", "D", and "G" to compose the format, for example:
9G999D00 where
9 represents a displayed number only if present in data
G represents the group separator
D represents the decimal separator
0 represents an explicitly displayed number regardless of incoming data
See Using the Oracle Format Mask, Oracle XML Publisher Report Designer's Guide for
more information about these format mask components.
After a currency format has been created, you can update or delete it from the Currency
Formats page.
i followed all the above step ,i need to use germany currency ,i have also used the format-currency command in my RTF template,but still its not working ,i used 9G999D00 for masking .
Any hint would be very helpful ,thanks in advance .Please let me know if my question is not clear
Thanks
Prataphi all
Thanks ,this is resolved ,i just missed clearing cache ,after clearing the cache its working .
thanks
Pratap -
Nokia 1112 how to use My Conversions
Hi, I have juast got myselfa new Nokia 1112 and the manual is very poor indeed.
I am trying to use the My Conversions, but so far no luck in using it to how I want to.
For example, My Conversions then I use the Title Antenna, then Input name: Frequency, then Output name: Length, then Factor (now for this to work I should enter "/ 468")
But I cannot use any of the keys apart from the number keys.
The Idea is that I can calculate the length of an Antenna divided by the frequency length of 468feet.
Example Frequency 27.500 Mhz should give me 17.018
468 divide by frequency (27.500) result is 17.018
How can I use My Calculations to do any thing?
TIA,
Mike.@Zulumazu
Unfortunately not compatible with Nokia Multimedia Transfer:http://europe.nokia.com/support/product-support/nokia-multimedia-transfer/download
You can set it up as Modem with Mac so doesn't Mac find your 2330 Classic?
http://setup.orange.co.uk/getConnected/gprsguide.asp?ProductId=700000079039&_t=t&sl=700000079045&sl=...
Happy to have helped forum with a Support Ratio = 42.5 -
How to do Currency conversion thru transformation rule BI 7.0
Hi all;
I am loading data from flat file to the cube. The flatfile contain Source currency (USD) and Incentive Amount base on Source currency.
In my cube I have an object call Source Incentive Amount and anohter object name Planning(Local) Incentive Amount.
How do I convert that Source Incentive Amount(USD) to Planning(Local) Incentive Amount (EUR) thru a transformation rule so I can map 1 Incentive Amount from the flat file to 2 Incentive objects in the cube.
Note: The planning(Local) currency is not on the flat file, I have to pull it from the cost_center object and I don't know how to pull that either.
Please help.
RainnieHi,
Check here.
Restore a migrated data source
/thread/814123 [original link is broken]
Emulation, Migration and Restoring DataSources
http://help.sap.com/saphelp_nw04s/helpdata/en/43/682cacb88f297ee10000000a422035/content.htm
Thanks,
JituK -
How to use conversion routine?
hi,
in my z-table i have a field called matnr for the material number say.
its domain defines it as 18 char.
say i have created an entry say 200.
so it will be saved may be as 000000000000000200.
i want it should be displayed with as 200.
and if i search for say 200.
so it should not look for the proceeding zero's.
it should not give me an error that record doesn't exists.
please tell me how to use exaclty conversion routine.
thanks
ektahi all,
the problem has been solved.
CONVERSION_EXIT_MATN1_OUTPUT this FM module can only be used where the z-table has matnr of the type MATNR the standard matnr of the table mara.
so in my program it was not working.
my data element was not matnr.
i had used a popup for position finder.
so it could not read the material number which had zeros as prefixes.
thanks for all the help
thanks
ekta
below the code is mentioned...................
*******************************C O D E*******************************************
WHEN '&POS'.
popup_title = 'Choose The Material Number'.
CLEAR it_fields.
it_fields-tabname = 'Z10ET_TAB_MAT01'.
it_fields-fieldname = 'MATNR'.
it_fields-field_attr = ' '.
it_fields-field_obl = 'X'.
APPEND it_fields.
CALL FUNCTION 'POPUP_GET_VALUES'
EXPORTING
no_value_check = 'X'
popup_title = popup_title
start_column = '5'
start_row = '5'
IMPORTING
returncode = returncode
TABLES
fields = it_fields
EXCEPTIONS
error_in_fields = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF returncode = ' '.
MESSAGE i036 WITH it_fields-value.
SORT it_material_data BY matnr.
READ TABLE it_material_data INTO wa_material_data
WITH KEY matnr = it_fields-value.
IF sy-subrc = 0.
tab_ctrl1-top_line = sy-tabix.
REFRESH it_fields.
CLEAR returncode.
CLEAR ok_code_0101.
ELSE.
CONCATENATE concat it_fields-value INTO v_matnr.
READ TABLE it_material_data INTO wa_material_data
WITH KEY matnr = v_matnr.
IF sy-subrc = 0.
tab_ctrl1-top_line = sy-tabix.
REFRESH it_fields.
CLEAR returncode.
CLEAR ok_code_0101.
ELSE.
MESSAGE i037 WITH it_fields-value.
REFRESH it_fields.
CLEAR returncode.
CLEAR ok_code_0101.
ENDIF.
ENDIF.
ENDIF. -
Currency Conversion using third party tool
Hi,
I am trying to access BW from a third party tool and so far been quite successfull accessing BW Infocubes and Bex Queries by using OLAP BAPIs. However my customer wants to use currency conversion as it is available in BEX in the third party tool as well. I need some thoughts in this direction from experts who have worked on Business Objects and BW integration.
I believe Business Objects has a similar interface with BW using OLAP BAPIs. Is there a currency conversion functionality available in Business Objects for BW? Would really appreciate if somebody, who has tried out this feature, can share some of his/her experience.
Thanks,
Anurag.Jean,
We use Maestro for all our scheduling scripts. To start\stop the
environment and start\stop applications. We create a shell script that uses
escript to start/stop applications. Maestro just calls the shell scripts
and monitor it for completion. I think you have to write the shell script
in a standard way to return an error if it does not finish properly. Here
is an example:
#!/bin/csh
source /appls/forte/fortedef.csh
$FORTE_ROOT/install/bin/start_nodemgr -fm "(x:300000)" -e TR2ProdEnv
ps -fu forte | grep -v grep|grep nodemgr>/appls/forte/production/scripts/KBB
set KBB=/appls/forte/production/scripts/KBB
if (-z $KBB) then
exit 1
else
exit 0
endif
Hope this helps.
ka
Kamran Amin
Forte Technical Leader, Core Systems
(203)-459-7362 or 8-204-7362 - Trumbull
[email protected]
From: Jean Mercier[SMTP:[email protected]]
Sent: Monday, April 12, 1999 10:36 AM
To: Forte-Users (E-mail)
Subject: Using third party tool to initiate a Forte batch program
Hello Forte Users,
Our company has acquired a software product called Maestro. It's a
production scheduling facility that manages tasks for batch mode
execution.
We would like to know if anyone out there has had any experience using
this
product with Forte. One recommendation that we discussed was to have
Maestro start a script on Escript to communicate to an agent that would
start the batch process at a specified time. Has anyone done something
similar or can offer any suggestions ?
Thanks in advance,
Jean Mercier
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
Hi All,
I would like to know how to do currency conversion when we have source system currency as INR and target currency as USD, let me know in detail.
regards,
AliHi,
First you have to define currency conversion key using T. code RRC1.
After this, you have 3 options..
1. Conversion at the time of loading - Write code in Transfer/Update rule
2. Conversion at query design - In KF properties select the conversion key and target surrency
3. Conversion at query execution time - After query execution, right click on KF and select currency conversion option.
Regards
SSS -
Currency Conversion Variable is showing the Technical name of the variable.
Hi friends,
We are using currency conversion Variable in our querie, it was showing the description of the variable until yesterday.
Somehow something has changed and suddenly its showing up the Technical Name inteasd of Description. This is happening not only to one variable but for many of them.
Can someone pls guide me how to rectify this?
Your help verymuch appreciated.
Thanks in advance.
BNWe had the same problem. Unfortunately this setting only seems to be available for a query view. We were using web reporting anyway so we just converted the dataprovider to be a query view where this setting had been made. It's a bit ugly but it worked.
Maybe you are looking for
-
Disappointed in Verizon's lack of consideration
My wife had to replace a Motorola Droid Max.. three times. Each time there was a few or more days between being able to use the Verizon service........ one or two days to receive a refurbished replacement and another day or two to get to Verizon to
-
Errors that I Can't get rid of?!
Hello, I'm new to this community and have a question. Not sure if this is the right place to ask, but it's worth a try. So, I got a call from lenovo inc. somewhere in New Jersey (let's be serious please) and they told and showed me that there are a b
-
Help please new app user!
Hi I have recently downloaded a free app named paint sparkles for my daughter & I have upgraded to allow the app to do more, I currently have this on my iPad, should the upgrade also show on my iPhone 5, as it is still showing the version without the
-
Canon printer update not available
Software update appears to find new Canon mfp (MX870) software but when it asks to install it, I get a dialog box saying the "software is not available at this time". This hase been happening for the last 2-months or so. Running 27" iMac with OS 10.8
-
Delphi Crystal 10 vcl subreport link issue (on second run)
Post Author: mkozma CA Forum: Other I have a Delphi application (Delphi 7 using Crystal 10 VCL) that calls a subreport based on a link. The report (and subreport) work fine for a particular id the first time but if I rerun the report a second time, t