How to use different images in the Table of Contents?

Hello everyone, I am creating an iBook about Architecture and I would like to have different images for each Chapter in the Table of Contents... But when I add an image it automatically appears on all the other chapters, too. What am i doing wrong?

You drag the image to the screen and it replaces the placeholder image.
When you hover over the current image, don't you get the message "this is a placeholder . . ." under your mouse pointer?
I think the documentation states that the new image must be jpg or png, but a Photoshop image seems to work too.
In portrait mode, only one image shows at the top of the list of chapters, and that can be changed too.
But in landscape mode, all of the separate chapter images can be accessed by clicking the littel dots at the bottom of the screen when at the TOC page.

Similar Messages

How do I add headers to the Table of Contents?

Hi there,
I have a book that mainly consists of text boxes rather than inline text. The main title (on each page) is what I want to show up in the table of contents so the reader can just tap the title and jump to the page. How I tried to do this was make the titles "Header 1" and then go to table of contents and add that to the list but it doesn't seem to be working. I am thinking it's because TOC might only work with inline text. Does anyone have any other suggestions for this?
Any help would be greatly appreciated.
Thanks,
Caleb

Sorry, I'll try to describe this layout as best I can and if I still need to change it to make it work then I guess that's life.
Page Layout
Preface
Mission Statement
About the Author
Acknowledgements
Using the Manuals
Chapter 1 - Muscles of the Lower Leg
Soleus Medial
Soleus Lateral
Plantaris
etc.
Chapter 2 - Muscle Quizzing
Soleus Medial
Soleus Lateral
Plantaris
etc.
So when your in the table of contents, you can swipe between preface, muscles of the lower leg, and quizzing pretty easily. In preface (underneath the preface title in the table of contents) it shows a list saying Mission statement, about the author, etc.) I want that same list to appear for the pages under Muscle Quizzing.

How to use different parameters for two tables(chart and Table) in one report in SSRS?

Hi,
Here is my requirement, i have 7 parameters in my report(Site,Account,LOB,year,Month,WeekDay and Date_Filter),
and in my report i have one table and one Chart,
my requirement is the table in the report has to show the data for 6 parameters only i.e(Site,Account,LOB,year,Month and WeekDay).so the table has to consider only 6 parameters, and it has ignore the 7th parameter, table should not consider Date_Filter parameter.
And Chart has to consider all 7 parameters.
so, when we preview the report table has to show the data for only 6 parameters and chart has to show the data for all 7 parameters.
if there is a way to get this Please reply me ASAP, it is an urgent requirement.
Thanks in Advance,
Naveen

Hi Naveen,
Refer below link to create multiple datasets as suggested by Gnanadurai
http://technet.microsoft.com/en-us/library/ff714047(v=sql.105).aspx
Thanks
Swapna

How to hide page number in the table of content

Hi,
I'd like to know how to hide page number in the ToC. They show automatically, but at least for the headings of third ad fourth order I'd like to suppress/omit them.
Thanks for any advice!

You have in the Inpspector > Document tab > TOC > uncheck button for #'s

How to add round image inside the table column? with different background color, column value should appear in the middle of the round portion.

Hi
This question is related to table component implementation.
I want to display the column values inside the small round image with different colors and value should appear in the middle.

Hi,
>>1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?<<
I’m sorry for the issue that you are hitting now.
This itextsharp is third party control, for this issue, I recommended to consult the control provider directly, I think they can give more precise troubleshooting.
http://sourceforge.net/projects/itextsharp/
Thanks for your understanding.
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I am trying to link to page in my document from the table of contents. How can this be done?

I am trying to link to page in my document from the table of contents. How can this be done?

The Table of Contents picks up selected named Styles in the text like Head 1, 2 etc.
Have you actually applied the styles?
Peter

How do I make a multi-line heading show up as a single line in the Table of Contents?

I'm writing a document where the headings often have a line break in them for the sake of formatting. When I generate a Table of Contents, they show up as two entries on the same page instead of as a single heading.
For example, if I have a section like:
Oh My God
You're Totally Not Going to Read This Section
Section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, section text, etc.
Then in the table of centents it shows up as something like:
The Section Before That Section You're Not Going to Read ... 14
Oh My God .................................................. 17
You're Totally Not Going to Read This Section .............. 17
The Section After That Section You're Not Going to Read .... 20
When what I really want is a Table of Contents like this:
The Section Before That Section You're Not Going to Read ... 14
Oh My God You're Totally Not Going to Read This Section .... 17
The Section After That Section You're Not Going to Read .... 20
(Actually, I have a bunch of sections with titles like this all in a row, so it looks much worse than in the example.)
How do I do this: Get the Table of Contents to ignore the carriage return in the middle of the section header?

Try a Soft return, Shift + Return, instead of Paragraph break.

How to Use an Image to Customize the Static Button Widget

Can I just get someone to help me figure out how to use an image to customize the static button widget, please?
I have tried using several different types of images, but none of them seem to actually change the appearance of the button.
Thanks!
Laura
Captivate 5.5

I tried to use the tools within the widget itself - it offers you the opportunity to use an image (see screenshot below).
I also opened it in Flash and tried to replace the images for one of the button styles there w/ my own, but in re-publishing the SWF from there I broke the widget. When I attempted to use the edited widget, there were no customization controls available after I inserted it (see screenshot two below).

How do I get the table of contents to toggle? I opened it while reading one book I had checked out from my library, but it is still open when I start another book. I am using Adobe 4 and Windows 8.1 on my PC.

How do I get the table of contents to toggle? It has remained open since I opened it while reading two books ago. Thanks for the help.

Thank you for your advice. I followed your directions, but came up with the same results. However, I did discover that whenever I open up the iPhoto Library that is already existing on my MacBook a certain set of pictures shows up. But then when I open up the iPhoto Library from the Hard drive another set of pictures shows up. BUT not ALL of my pictures are showing up on the iPhoto Library from the hard drive. At least the last two years of pictures are not showing up?! Actually, it appears that all the pictures are there from when I started using iPhoto about 5 years ago up until around the time that I got my iMac desktop computer and started using that (2 years ago). I have noticed that more recent videos I have made are showing up in a folder on the hard drive, but will not appear when I open up iMovie?! Any ideas on how to access my pictures from the last 2 years off of the hard drive???

How to fetch what are all the tables used in this TR no and Package name of

Hi Friends,
I have input of Transport Request no (E070-TRKORR).
How to fetch what are all the tables used in this TR no and Package name of this Table.

HI,
FYI
SELECT E071OBJECT_NAME, E070MDEVCLASS
FROM E071, E070M
WHERE TRKORR = YOU REQUEST NO.

Help on inserting/updating an IMAGE into the table

I am using a oracle 8i RDBMS and VB as the development kit. In one of the tables I need to store the picture ( scanned image). How I can store it in the table.

"In Flash, you can select an image in the library and update it's path to a different picture, in turn affecting anything on the stage that uses that image. Can this be done with ActionScript?"
no, you cannot edit a library item using actionscript.
you could create a class that loads an image thereby allowing you to change the appearance of all class instances simply by changing the image loaded. that would allow you to change images dynamically. but all class instances created before changing the image would remain unchanged after the image change.
even that issue could be resolved by storing all your class instances in an array, for example, and iterating through the array whenever previously created instances needed an image change.

How to have multiple images on the same screen? like in the movies where you see several actions at

how to have multiple images on the same screen? like in the movies where you see several actions at the same time ....
i don't find a tutorial in adobe tv....
thanks !!

The short answer is that you'll put the source clip(s) for each inset on a different video track, all stacked up. Then use the Scale and Position effects (under "Motion" on the Effect Controls panel) to reduce their size and place them where you want.
If the content of an inset will involve edited content (where you're cutting among various clips or just trimming out unwanted content from a single clip), then you'll probably find it easier to do all those edits in one sequence, then nest that sequence in the master sequence, where you apply the Scale and Positioning effects. That will save the step of applying the scale and position effects to each edited track item.

How to get only partial text of a paragraph into the table of content?

Hi guys,
currently I'm working on a manuscript based on the publication manual of the American Psychological Association.
Unfortunately, there is some sort of heading that's placed right in front of further text. Here an example:
+This is my heading.+ Now ordinary text formatted differently should follow.
Does anyone here know, how to get the text of the heading (but not the following text) into the table of content? For as far as I know I can't format the heading as a different paragraph than the following text.
By the way, I use pages'08.
Thanks for your help

Hi Dennis,
thanks for your suggestion, unfortunately I already tried that and it didn't work. I have created several unique styles. Problem is, I need two diferent styles in *one paragraph* - one style for the "heading", which is consistent to the APA manual not an own paragraph (sorry, not my idea...), and another style for the following text. As my example above shows, the heading is followed by usual text and I may not press return after the heading and switch to a new paragraph..
It has to look exactly like this:
+heading in italics.+ Now heading is followed by usual text without changing the paragraph or starting a new line. Blurb blurb blurb whatsoever blurb blurb. The text goes on an on and an on you see.
I can't format the heading differently than the text (because if I try, the whole paragraph is formatted this way) and so I can't add just the heading to the TOC. Do you see what my problem is? Got any other suggestion?

How To Store A Image In A Table

I want to store an image that showing on a form to a column of a table having data type BLOB.
Could anyone help immediately ?
Thanks
Saiful Alam
March 18, 2001
null

Georg,
Thanks for your response.
I want to solv the problem in this way.....
I have an application with following components
1. A table
CREATE TABLE table_a (image_id NUMBER(2), image BLOB)
2. A form form_a with following item
2.1. Name->form_a.image_id
Item type-> text item
2.2. Name->form_a.image
Item type->image
2.3. Name->form_a.ctrl
Item type->push button
MY REQUIRMENTS ARE
======================
1. I want to use following SQL statements in WHEN-VALIDATE-ITEM trigger of
form_a.image_id to retrive image from the table
and display it on the image item (i.e. form_a.image).
SELECT image
INTO :form_a.image
FROM table_a
WHERE image_id=:form_a.image_id;
1. I want to use following SQL statements in WHEN-BUTTON-PRESSED trigger of
form_a.ctrl to update image of the table
UPDATE table_a
SET image=:form_a.image
WHERE image_id=:form_a.image_id;
Above statements doesn't work
How can I do above things ?
Could you help me.
Thanks
Saiful Alam
[email protected]
null

How to sync different image folders from pc without removing images from ipad

how to sync different image folders from pc without removing images from ipad as ipad asks to replace the already existing images in ipad with the pc folder.

Spare yourself the frustration, use Photo Manager Pro.
https://itunes.apple.com/sg/app/photo-manager-pro/id393858562?mt=8

How to use different images in the Table of Contents?

Similar Messages

Maybe you are looking for