How to use DSP48E Multipliers ? (FPGA)

Hi,
I'm currently trying to implement a high speed gauss function generator on a PXI-7841R. I need several fast multipliers to calculate the exponent, so I would like to make use of the DSP48E slices. I have limited the operands to less than 18 and 25 bits, but it seems like the DSP-slices are not used in any case. I have several integer and fixed-point-multipliers in my VI, but the compilation report only states 3 used DSP-slices. Can anybody tell how to make Labview using them. Thank.
Regards,
Matthias
Solved!
Go to Solution.

I am still playing around with the code but here is an update.
I compiled the code you provided.
I have experienced this issue as well with the XST reporting. It does recognize using multipliers as show here:
======================
HDL Synthesis Report
Macro Statistics
# Multipliers                                          : 2
25x18-bit multiplier                                  : 2
# Adders/Subtractors                                   : 53
17-bit adder                                          : 1
18-bit adder                                          : 1
20-bit addsub                                         : 49
27-bit subtractor                                     : 1
34-bit subtractor                                     : 1
# Counters                                             : 7
16-bit down counter                                   : 1
However, the final report doesn't show the multipliers being located within a DSP48 slice but they are, if they weren't it would take a stupid amount of fabric to implement them.
The multiply by (-1) constant is being replaced by logic, should be a negate anyways, that is why only 2 multipliers are being utilized instead of 3 as expected from the high level diagram.

Similar Messages

In this report i have marked one line..if this width 30,i need to multiply by a number 0.3 and if the width =30,it multiplies by 0.37...how to use this logic here..??? anyone can help??

In this report i have marked one line..if this width < 30,i need to multiply by a number 0.3 and if the width >=30,it multiplies by 0.37...how to use this logic here..??? anyone can help??
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @SCCode nvarchar(30)
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
--Rcpt from PRDN (Condition checked for Return component exclusion also)
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'FG Item Code',
T3.ItemName as 'FG Item Name',
T2.PlannedQty as 'FG Planned Qty',
T2.U_OD as 'OD',
T2.U_ID as 'ID',
T2.U_OD/25.4 as 'Inches',
(T2.U_OD-T2.U_ID)/2 as 'Width',
0 as 'FG Pending Qty',
0 as 'FG Receipt Qty',
'' as 'Issue Item Code',
'' as 'Issue Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
0 as 'Issue Item - Return Quantity',
'' as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode not in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode INNER JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID, T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2
UNION ALL
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'Item Code',
T3.ItemName as 'Item Name',
T2.PlannedQty as 'Planned Qty',
T2.U_OD as 'OD',
T2.U_ID as 'ID',
T2.U_OD/25.4 as 'Inches',
(T2.U_OD-T2.U_ID)/2 as 'Width',
(Select (T2.PlannedQty - (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum))) as 'Pending Qty',
(Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum) as 'Receipt Qty',
a.ItemCode as 'Issued Item Code',
a.Dscription as 'Issued Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
(Select (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode))) as 'Issue Item - Return Quantity',
(ISNULL((Select (Select a2.DocNum from OIGN a2 where a2.DocEntry = a1.DocEntry) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode)),'')) as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode LEFT JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID,T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2,a.ItemCode,a.Dscription order by T2.DocNum desc

Hi,
Try this:
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @SCCode nvarchar(30)
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
--Rcpt from PRDN (Condition checked for Return component exclusion also)
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'FG Item Code',T3.ItemName as 'FG Item Name',T2.PlannedQty as 'FG Planned Qty',T2.U_OD as 'OD',T2.U_ID as 'ID',T2.U_OD/25.4 as 'Inches',(T2.U_OD-T2.U_ID)/2 as 'Width',case when ((T2.U_OD-T2.U_ID)/2) <30 then ((T2.U_OD-T2.U_ID)/2) *0.3 end, 0 as 'FG Pending Qty',0 as 'FG Receipt Qty','' as 'Issue Item Code','' as 'Issue Item Name',Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',0 as 'Issue Item - Return Quantity','' as 'Return Doc No',SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntryINNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCodeLEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode not in (a.ItemCode)LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode INNER JOIN OIGN d on c.DocEntry = d.DocEntryWHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID, T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2UNION ALL SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'Item Code',T3.ItemName as 'Item Name',T2.PlannedQty as 'Planned Qty',T2.U_OD as 'OD',T2.U_ID as 'ID',T2.U_OD/25.4 as 'Inches',(T2.U_OD-T2.U_ID)/2 as 'Width',case when ((T2.U_OD-T2.U_ID)/2) >=30 then ((T2.U_OD-T2.U_ID)/2) *0.37 end, (Select (T2.PlannedQty - (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum))) as 'Pending Qty',(Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum) as 'Receipt Qty',
a.ItemCode as 'Issued Item Code',
a.Dscription as 'Issued Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
(Select (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry
where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode))) as 'Issue Item - Return Quantity',
(ISNULL((Select (Select a2.DocNum from OIGN a2 where a2.DocEntry = a1.DocEntry) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode)),'')) as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode LEFT JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,
T2.PlannedQty,T2.U_OD,
T2.U_ID,T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2,a.ItemCode,a.Dscription
order by T2.DocNum desc
Thanks & Regards,
Nagarajan

How to use DoubleBinding to multiply two TextFields in javafx fxml appl

Hi everyone!
I want to multiply two TextFields created with Scene Builder.
how to use DoubleBinding to multiply two TextFields in javafx fxml application.
I shall be very gratefull to you for this guidance.
Regards
Tanvir

Hi tanvir,
I don't think it is pretty hard. Here is simple code below which grabs the value of Textfield and sums them up and update to the DoubleProperty.
//t1: TextField
//t2: TextField
//sumProperty :DoubleProperty
double sum = 0;
try{
     double d1 = Double.parseDouble( t1.getText());
     double d2 = Double.parseDouble( t2.getText());
     sum = d1+d2;
     sumProperty.set(sum);
}catch(NumberFormatException nfe){
     nfe.printStackTrace();
}   Thanks
Narayan

How to use LabVIEW FPGA on Custom FPGA board other than NI products .....Also how to develop RTx DLL for a customised motion controller hardware

I'm using RTx, LabVIEW RT and LabVIEW FPGA.
The GUI is windows based. The motion control and FPGA are RTx based.
Is there any way to develop device drivers for the custom hardware in RTx. For example motion controller hardware, FPGA hardware, PCI hardware.
Is there a possibility to use custom FPGA boards to use with LabVIEW FPGA.
Please send me some links
Thanks
Bhoopathy
Take life as it comes! you may never know what's gonna happen Tommorrow

CODE WARRIOR Hello. I believe this question was answered in a previous post. Please let us know if you have any new questioins or if you need some clarification.
You are able to develop device drivers for your custom hardware using the NI Measurement Hardware Driver Development Kit.
However, it is not possible to use custom FPGA boards with LabVIEW FPGA. The FPGA boards have to be one of our R Series boards. Here are some links that should shed some light on the Measurement Hardware DDK.
Measurement Hardware Driver Development Kit Frequently Asked Questions
NI Measurement Hardware DDK (Driver Development Kit)
Please post if you have further questios.
Efosa O.
NIAE

Using Host and FPGA.vi in Teststand

Does anyone know how to use the Host and FPGA vi's in Teststand?? A National App Engr told me I have to call the Project that the vi is in to get all the functionality of the FPGA. How do you call a Project in Teststand??
Thanks

Ensure you are using the TestStand version 2010 or above. Create a new instance of a sequence and add a LabVIEW action step to it. Go to Module panel and browse for a LabVIEW project as displayed below.

How to use Java code to implement Divide-and-Conquer multiplication???

i think use Divide-and-Conquer multiplication algorithm to multiply 31415975 by 81882818. Because i have study data structure and algorithm for needs people helps to solve this problem!!! The answer is should equals the both number (31415975 * 81882818) multiplication! There are must pass the program to calculation the multiply with use divide-and-Conquer!
How to use the program calculation the both number multiplication with divide-and-Conquer??? That is needs display the different number multiplication on the screen!!!

This is what I think you meant to say
yijun1988 wrote:
I am considering using Divide-and-Conquer multiplication algorithm to multiply 31415975 by 81882818.
Because i have study data structure and algorithm.
I need help to solve this problem!
The result should equal the product (multiplication) of the two numbers (31415975 * 81882818)
The input must be passed as parameters to the program to calculate the product using Divide-and-Conquer!
How to implement number multiplication with divide-and-Conquer?
The steps of the algorithm need to be displayed on the screen!Which part of this are you having problems with?

I don't know how to use a light layer in After Effects CS4

Hello,
I work with a lot of texts layers and it's very trendy to put a light layer across the text at one point or another, it looks really good too. But I've looked on the net for tutorials and can't figure out how to use the light layer so that a light goes across a text from one side to the other. It looks like a flash light went across the text. I go to the top and choose >Layer >New >Light.
What happens is the color of the text changes (the part that isn't shined upon). How can I change the settings so that the text color doesn't change? Do you know of any video tutorials to use for a light layer?
Thank you for your time!!

How can I change the settings so that the text color doesn't change?
That is kind of a paradox. The whole point of using 3D lights is to have them illuminate the layer, including all shading properties. Color is defined by the layer's base color multiplied with light color and intensity. You really need to set your mind into 3D mode. That aside, I wouldn't bother using a light with flat text. Simply create a feathered circle on top (or 2 or 3), set blending mode to add and animate it across your type.
Mylenium

How to use catch ---CATCH ... ENDCATCH

Hi Expert:
How to use CATCH ... ENDCATCH the statement, would you please explain it with an example non-numeric exception. that is to say, if it is not a number , an exception would be received and handled. Would you please give me more discription about how to handle it?
couldn't thank you more.
Best regards.

Hi,
Variants:
1. CATCH SYSTEM-EXCEPTIONS except1 = rc1 ... exceptn = rcn.
Effect
You can catch ABAP runtime errors in the processing block enclosed in the CATCH ... ENDCATCH statements.
Note the following:
rc1 ... rcn must be numeric literals.
CATCH ... ENDCATCH may be placed anywhere where IF ... ENDIF (for example) may occur. It is local, not cross-event.
It may be nested to any depth.
It only catches runtime errors in the current call level. This means, for example, that runtime errors resulting from PERFORM- or CALL FUNCTION statements are not trapped by CATCH ... ENDCATCH.
Specifying a SYSTEM-EXCEPTION
You can specify the following as except1 ... exceptn:
The error ID of the runtime error that you want to catch (ex. CONVT_NO_NUMBER)
An ERROR class
OTHERS, any remaining catchable errors.
Catchable runtime errors are assigned to ERROR classes. If you specify an ERROR class, all of its associated runtime errors will be caught. If you specify OTHERS, the system traps all catchable runtime errors.
Keyword dependency
Within CATCH ... ENDCATCH, a particular runtime error will only be caught if it is caused by a particular keyword.
You can find out the keywords with which you can catch a particular runtime error:
In the keyword documentation. This specifies the catchable runtime errors for the keyword,
In the
Assignment of keywords to ERROR classes.
If the system catches a runtime error,
the current processing block is interrupted, and the program processing jumps directly from the statement where the error occurred to the ENDCATCH statement. This occurs irrespective of the number of control structures (IF, DO, LOOP, SELECT, CATCH, etc, ...) bypassed in so doing.
No guarantees can be made about the contents of any fields involved in the runtime error following the ENDCATCH statement.
The
return code
is set as follows:
After the ENDCATCH statement, SY-SUBRC is set to the corresponding value "rcn". This is the value assigned to the runtime error or ERROR class in the CATCH statement. If there is more than one "exceptn = rcn" expression in the runtime error, the "rcn" from the first expression is used. This is particularly significant if there are two ERROR classes which contain the same runtime error.
If the system does not catch a runtime error, the value of SY-SUBRC after the ENDCATCH statement is 0.
Example
Nested Structures
The example below calculates the factorial of the program parameter "fact ". If "fact" is too large, the system catches the runtime error COMPUTE_BCD_OVERFLOW . In this case, the system leaves the current DO...ENDDO loop at the MULTIPLY... statement, and jumps to the ENDCATCH statement.
PARAMETERS fact TYPE i.
DATA: fact_save TYPE i,
res(16) TYPE p.
ARITHMETIC_ERRORS contains COMPUTE_BCD_OVERFLOW ***
CATCH SYSTEM-EXCEPTIONS ARITHMETIC_ERRORS = 5.
res = fact_save = fact.
SUBTRACT 1 FROM fact.
DO fact TIMES.
MULTIPLY res BY fact. "<- COMPUTE_BCD_OVERFLOW
SUBTRACT 1 FROM fact.
ENDDO.
ENDCATCH.
IF sy-subrc = 5.
WRITE: / 'Overflow! Factorial of', fact_save,
'can not be calculated.'.
ELSE.
WRITE: / 'Factorial of', fact_save, 'gives', res.
ENDIF.
Examples
Keyword Dependency
In the first example, the runtime error CONVT_NO_NUMBER is caught during conversion with MOVE.
In the second example, the runtime error cannot be caught, since the keyword SELECT has no primary conversion function.
In the third example, the conversion takes place in an auxiliary field (MOVE 'abc' TO int.) andn the SELECT statement uses only operands with the same type. This enables the system to catch the runtime error.
DATA I TYPE I.
CONVERSION_ERRORS contains CONVT_NO_NUMBER ***
CATCH SYSTEM-EXCEPTIONS CONVERSION_ERRORS = 1.
MOVE 'abc' TO I. " <- Error: CONVT_NO_NUMBER
ENDCATCH.
IF SY-SUBRC = 1.
ENDIF.
TABLES SFLIGHT.
CATCH SYSTEM-EXCEPTIONS CONVERSION_ERRORS = 1.
SELECT * FROM SFLIGHT
WHERE SEATSMAX = 'abc'. " <- Error: CONVT_NO_NUMBER
ENDSELECT.
ENDCATCH.
TABLES SFLIGHT.
DATA int LIKE SFLIGHT-SEATSMAX.
CATCH SYSTEM-EXCEPTIONS CONVERSION_ERRORS = 1.
MOVE 'abc' TO int. " <- Error: CONVT_NO_NUMBER
SELECT * FROM SFLIGHT WHERE SEATSMAX = int.
ENDSELECT.
ENDCATCH.
Note
Using Runtime Error ID and ERROR Class
You are recommended only to use ERROR classes in the CATCH statement wherever possible. Assignment of keywords to ERROR classes contains a simple description of which errors are covered by a particular ERROR class.
You should only use the runtime error ID if the error situation can be very precisely defined. For more information about when runtime errors occur, see alphabetical list of all catchable runtime errors.
Note
Performance:
The CATCH...ENDCATCH statements require about
3-4 msn (standardized microseconds) of runtime, if no runtime error occurs.
If the statements then have to catch a runtime error, they may require more runtime, depending on the type of the runtime error. In the least serious case, this will be another 3-4 msn. In more serious cases, it can be up to 20 msn. For most cases, the increased runtime will be around 5-10 msn.
Regards,
Narasimha

How to use one email adress for multiple recipients

Hello,
I'd like to know how to use one email adress for multiple recipients.
this would be very useful or projects. for example;
if i send one mail to [email protected], all people in this project get an email.
I will add the people in this project myself.
I know it is possible, but I don't know how to do it ;-)
please help me!

Hope this help.
_http://technet.microsoft.com/en-us/library/cc164331(v=exchg.65) .aspx

Can't figure out how to use home sharing

Since the latest couple iTunes updates, my family and I can not figure out how to use home sharing. Everyone in our household has their own iTunes, and for a long time we would just share our music through home sharing. But with the updates, so much has changed that we can no longer figure out how to use it.
I have a lot of purchased albums on another laptop in the house, that im trying to move it all over to my own iTunes, and I have spent a long time searching the internet, and everything. And I just can't figure out how to do it. So.... how does it work now? I would really like to get these albums from my moms iTunes, onto mine. I would hate to have to buy them all over again.
If anyone is able to help me out here, that would be great! Thanks!

The problem im having is that after I am in another library through home sharing, I can't figure out how to select an album and import it to my library. They used to have it set up so that you just highlight all of the songs you want, and then all you had to do was click import. Now I don't even see an import button, or anything else like it. So im lost... I don't know if it's something im doing wrong, or if our home sharing system just isn't working properly.
Thanks for the help.

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

How to use airport time capsule with multiple computers?

I'm sure there are some thread about this but i couldn't find it... so sorry for that but hear me out! =)
I bought the AirPort Time Capsule to back up my MBP
And so i did.
then i thought "let give this one a fresh start" so i erased all of it with the disk utility and re-installed the MBP from the recovery disk.
I dont want all of the stuff i backed up just a few files and some pictures so i brought that back.. so far so good.
Now i want to do a new back up of my MBP so i open time machine settings, pick the drive on the time capsule and then "Choose" i wait for the beck up to begin, and then it fails. It says (sorry for my bad english, im swedish haha) "the mount /Volume/Data-1/StiflersMBP.sparsebundle is already in use for back up.
this is what i want:
i want the "StiflersMBP.sparsebundle" to just be so i can get some stuf when i need them. it's never to be erased.
i want to make a new back up of my MBP as if it's a second computer...
so guys and girls, what is the easiest and best solution?
Best regards!

TM does not work like that.
If you want files to use later.. do not use TM.
Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
Read some details of how TM works so you understand what it will do.
http://pondini.org/TM/Works.html
Use a clone or different software for a permanent backup.
http://pondini.org/TM/Clones.html
How to use TC
http://pondini.org/TM/Time_Capsule.html
This is helpful.. particularly Q3.
Why you don't want to use TM.
Q20 here. http://pondini.org/TM/FAQ.html

How to use multiple ipods on one account

I have an Ipod classic and just bought my sons two nano's how do I use these on the same account without changing my account info?

Take a look here:
How to use multiple iPods with one computer
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

How to use a Table View in AppleScriptObjC

How can I use a table view and add data to it? And how can I display a button cell and image cell in the table? Thanks.

Hi all,
Actually i need some more clarification. How to use the same select statement, if i've to use the tabname in the where clause too?
for ex : select * from (tab_name) where....?
Can we do inner join on such select statements? If so how?
Thanks & Regards,
Mallik.

How to use '|' delimited as seprator in GUI_DOWNLOAD ? Plz suggest me ,,

how to use '|' delimited as seprator in GUI_DOWNLOAD ? Plz suggest me ,,
i want the output should be seprated by '|' delimited when i download the file.

Hi,
We will pass the seperator to the WRITE_FIELD_SEPARATOR parameter as
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = v_file
write_field_separator = '|'
TABLES
data_tab = itab[] . "Our internal talbe filled with data
Re: Why Function GUI_DOWNLOAD can create XML file but not a flat file?
Award points if useful
Thanks,
Ravee...

How to use DSP48E Multipliers ? (FPGA)

Similar Messages

Maybe you are looking for