How to use engin to excute a sequnecefile through TS API

I want to devlope a GUI by Microsoft visual c++6.0 with the TS API now .
I'm trying to excute a sequence file when I obtain a sequence .Here's a code
TS:equenceFilePtr sqfile=l_engine->GetSequenceFileEx(filename,GetSeqFile_OperatorInterfaceFlags,ConflictHandler_Error);// get the sequencefile point
TS::ExecutionPtr excution=l_engine->NewExecution(sqfile,"Test UUTs",mode_file,FALSE,0);
the mode_file is the SequentialModel.seq , only the sqfile'mainsequence is run,and other sequence not run.
I want to know how to control some sequences which I want to run, for instance, a sequencefile has ten sequences and new I want to the 1 3 4 to run.
Who can tell me.
Thanks.---meishibulai

Hi,
This is a NI TestStand topic. Please post the question on TestStand discussion board.
http://forums.ni.com/ni/board?board.id=330
Thanks!
Feilian (Vince) Shen

Similar Messages

Need a shortcut to "Allow pages to choose their own colors, instead of my selections above option preference" I know where it is and how to use it but I have to go through 7 mouse clicks to change it, then a few minutes later change it back. I also k

Need a shortcut to "Allow pages to choose their own colors, instead of my selections above option preference" I know where it is and how to use it but I have to go through 7 mouse clicks to change it, then a few minutes later change it back. I also know the sequnce is alt t, alt o, alt c, alt a, then ok, ok. Got to be a way to make a one key short cut for this. I use a black background to reduce eye strain, but about 10% of the webpage I go to can't be send with black so I have to go into tools and hit 6 or 7 things to chnage it then after through with webpage have to do it all over at Not allow webpages to have own color. Very very cumbersome.
== This happened ==
A few times a week
== made that way

https://addons.mozilla.org/en-US/firefox/addon/toggledocumentcolors-198916/
The above addon will solve your problem.
Shortcut to toggle user color/page color :- Ctr+Shift+C

How to use Pick Release Rule while doing pick relase from API.

Hi All,
I need to Pick Release the Order based on pick release rule through and API. I am using WSH_DELIVERY_PUB to do Pick release/confirm.
I did not find any parameter in the API which allows to use Picking rules for Pick Release.
Is there any way we can do the PICK RELEASE using Picking Rule through APIs.
Any information on this will be appreciated.
Thanks
Sreenivasa Gurani.

Hi Srini,
You need to use WSH_PICK_LIST.RELEASE_BATCH API, this one has two parameters
1. p_batch_id -- Get it from WSH_DELIVERY_DETAILS tables
2. p_log_level -- Not requires
Or
By Using this API you create the Batch
WSH_PICKING_BATCHES_PUB.CREATE_BATCH -- This API Returns Batch id
use this batch_id for WSH_PICK_LIST.RELEASE_BATCH
Thanks
Reddy

How to use Axis to access a web service through Authentication proxy

Using axis access internat web service is success,but access a web service through Authentication proxy is failure.But other java classes connect through a proxy to the internet which works very well:
please help me ,thank you!!!
import org.apache.axis.client.Call;
import org.apache.axis.client.Service;
import javax.xml.namespace.QName;
//this is my access webservice faliure   codes
public class TestClient
   public static void main(String [] args) {
       try {
            System.getProperties().setProperty("http.proxySet", "true");
            System.getProperties().setProperty("http.proxyHost","proxy.com");
            System.getProperties().setProperty("http.proxyPort", "8080");
            System.getProperties().setProperty("http.proxyUser", "username");
            System.getProperties().setProperty("http.proxyPassword","password");
           String endpoint =
                    "http://nagoya.apache.org:5049/axis/services/echo";
           Service service = new Service();
           Call     call    = (Call) service.createCall();
           call.setTargetEndpointAddress( new java.net.URL(endpoint) );
           call.setOperationName(new QName("http://soapinterop.org/", "echoString") );
           String ret = (String) call.invoke( new Object[] { "Hello!" } );
           System.out.println("Sent 'Hello!', got '" + ret + "'");
       } catch (Exception e) {
           System.err.println(e.toString());
   }I get an "(407)Proxy authorization required" error?

I am also looking for a solution. Does any one know how to do through code instead of jvm settings?
Thanks in advance!

How to use protected method of a particular class described in API

I read in some forum that for accessing protected method reflcetion should be used. If I'm not wrong then how can I use reflection to access such methods and if reflection isn't the only way then what is another alternative. Please help me...
regards,
Jay

I read in some forum that for accessing protected
method reflcetion should be used. If I'm not wrong
then how can I use reflection to access such methods
and if reflection isn't the only way then what is
another alternative. Please help me...Two ways:
- either extend that class
- or don't use it at all
If you use reflection, you're very likely to break something. And not only the design. Remember that the method is supposed to be inaccessible for outside classes.

How we use group by function while inserting data through datablock

Hi All
i have datablock in tabulor form
i want when i insert data (commit) then data will insert in group by
example
my table is like that
desc table
dress_name     color             qty
and i am inserting data into it like this
dress_name    color     qty
nice_dress      BLK       1
nice_dress      BLK       1
nice_dress      BLK       1
vik_dress        GRY      1
vik_dress        GRY      1
vik_dress        GRY      1
i want when i retrive the data it will like this
dress_name    color     qty
nice_dress      BLK       3
vik_dress        GRY      3Thanks and Regards
Vikas Singhal
Edited by: vikas singhal on Feb 14, 2011 4:05 PM

Hi vikas singhal
before insert i need to group it is possible or notPls note : Whenever you do a "group by" or "order by" operation, Oracle will invoke a sorting operation. Using the "group by" inside SQL syntax is also useful for doing summaries
i want when i retrive the data it will like this Pls try the following...
SQL> select
2    dress_name,
3    color ,
4    qty,
5    count(quantity) Num , sum(quantity)summation -- may be the same
6   from
8    ur_table_name
9 group by dress_name   , color ,   qty ;u can also try Francois's Suggestion by creating a view based on the last Query...
want when i insert data (commit) then data will insert in group by
make the view to be insert from it as follow...
http://www.java2s.com/Tutorial/Oracle/0160__View/PerforminganINSERTUsingaView.htm
Hope this helps...
Regards,
Abdetu...

I do not fully understand how to use the "Feature Sets" of "General 1" through 5

I recently upgraded and aparently the printer driver was included in this. When printing through Photoshop Elements 10 a new drop down menu appears for printing with my Epson Stylus Photo 1400. I now have "Printer Features" and when that is selected from a drop down menu "Feature Sets" appears with "General 1" through 5 as drop down menu items. I can not find a user manual for operating all the options I now have. No matter what combo I set up however, my prints have a band in them. The printer now prints an inch of the image, runs the printer heads over the paper 4 times and scoots the paper forward an inch to repeat. Its this part of the print that gets the band. Its as if I am printing on regular paper when in fact it happens with both the matt and glossy. I select the right paper options (you have to select it in 3 different places) and yet the banding continues. PLEASE HELP ME.

I recently upgraded and aparently the printer driver was included in this. When printing through Photoshop Elements 10 a new drop down menu appears for printing with my Epson Stylus Photo 1400. I now have "Printer Features" and when that is selected from a drop down menu "Feature Sets" appears with "General 1" through 5 as drop down menu items. I can not find a user manual for operating all the options I now have. No matter what combo I set up however, my prints have a band in them. The printer now prints an inch of the image, runs the printer heads over the paper 4 times and scoots the paper forward an inch to repeat. Its this part of the print that gets the band. Its as if I am printing on regular paper when in fact it happens with both the matt and glossy. I select the right paper options (you have to select it in 3 different places) and yet the banding continues. PLEASE HELP ME.

How can i send a set of can messages through channel api

Can anyone post an example code for sending a set(more than 3) of CAN signals using channel api.

you checked for examples?
Please remember to accept any solutions and give kudos, Thanks
LV 8.6.1, LV2010,LV2011SP1, FPGA, Win7

Does anyone know if apple's one-to-one program would be a good way to learn how to use logic pro or am I better off going to school to learn audio engineering or something?

Of course going to school would be a good option, but I want to know if one-to-one is also a good way to learn how to use logic pro. Has anyone been through the one-to-one program for logic pro and can say that they learned how to use logic pro well because of it?

For sure, one to one training, if given by a tutor who is capable, will hand you the means to build up self-confidence and will therefore let you operate the hard/software in an intelligent manner, instead of going for the trial and error method which has its pro's and con's too. Once you've passed this beginners phase you will make your own decisions intelligently and then you will also start to get experience and learn even from your mistakes. Something like that in theory and the rest is up to you!
Have a nice day

How to use Rstxt in smart forms

hi
how to use Rstxt in smart forms

Hi Ram,
Go through this hope u can understand.
How to Upload graphics (IMAGE) to your Sapscript?
Command in your Sapscript
/: INCLUDE Z_YOUR_LOGO OBJECT TEXT ID ST LANGUAGE E
These are the steps to be followed for uploading graphics in R/3 system
1.   First save the file as BMP
2.   Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and
      make it Zoom as 100% and save as *.TIFF
3.   Open SE38 and execute program RSTXLDMC
4.   Give your TIFF file path name
5.   Select Bcol (for Color)
6.   TEXT ID will be ZHEX-MACRO-*.
7.   Inplace of * write your own logo name (ZCOMPANYLOGO)
8.   Execute the program
9.   Now Goto SE71 create your ZFORM
10. Create logo window
11. Goto text element of logo window
or
In 4.6x :-
1. Goto SE71 Change the mode to GRAPHICAL
2. Choose the Graph Tabstrips
3. Now type in some name for the LOGO WINDOW
4. Press the IMPORT BUTTON (third button from left) and then IMPORT the BMP file from your DESKTOP
5. The code will be written automatically. You just need to drag and drop wherever you want
     the graphics to be.
/:   INCLUDE Z_COMPANY_LOGO OBJECT GRAPHICS ID BMON LANGUAGE EN
Reward points if help ful.
http://www.sap-img.com/ts001.htm
Sorry i think for Scripts ..
better to go for above post . it definetly works
Thanks
Naveen khan
Message was edited by:
        Pattan Naveen

How to use multiple visa read in one program

hi
i am working at Hameg HM8143 power supply i want to measure voltage and current simultaneiously and use the measured values for further calculations. for this i used two visa read blocks.
>>>>>>the measured values are shown in the same visa read string however i want it to be shown sepetately,
>>>>>>One of the VISA read block gives error. so i want to know how to use VISA read to get current and voltage simultaneously in seperate strings
>>>>>>than how to convert strings to numbers for using them for my calcultions.
i am attaching screen shot as well
Attachments:
screenshot.JPG ‏164 KB

you can not use a single serial to send 2 commands simultaniously?
There is a single serial line so one command has to be before another. This doesnt mena that you can not read from 2 seperate threads but will have to ensure that there is a locking mechanism to make sure that your queries are atomic. In labview encapsulating all communications can be done with an action engine which will allow for concurrent execution with automatic blocking of your resource (serial device).
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

How to use a JCO connection pool in an EJB?

Hi *,
I want to build a WebService using SAP Web AS (J2EE Engine) that connects to a R/3 ERP (release 4.7).
I thought of building a stateless session bean that will be deployed as webservice. The session bean shall connect to the R/3 in order to call some BAPIs. I'd like to use a JCO connection pool. But I'm not sure, where I should create and destroy the connection pool. Are the EJB methods ejbCreate() and ejbRemove() the right ones? If so, my businness methods would just have to get a connection from the pool and call the BAPIs, right? If not, what do you suggest?
Another question: I already deployed a bean as webservice. Since not really knowing how to use the connection pool, I created a bean with one business method that creates a connection pool whenever it gets called. But if I have to change something in the bean so that I have to redeploy the bean I can't call my business method anymore, because JCO cannot load a native library once again, as it is already loaded, This leads to an exception. So I have to restart the complete engine everytime I redeploy my bean. Are there any workarounds for this problem? I'm not sure whether this is connected to the wrong use of the JCO connection pool.
Kind regards,
Lars

Hi *,
I want to build a WebService using SAP Web AS (J2EE Engine) that connects to a R/3 ERP (release 4.7).
I thought of building a stateless session bean that will be deployed as webservice. The session bean shall connect to the R/3 in order to call some BAPIs. I'd like to use a JCO connection pool. But I'm not sure, where I should create and destroy the connection pool. Are the EJB methods ejbCreate() and ejbRemove() the right ones? If so, my businness methods would just have to get a connection from the pool and call the BAPIs, right? If not, what do you suggest?
Another question: I already deployed a bean as webservice. Since not really knowing how to use the connection pool, I created a bean with one business method that creates a connection pool whenever it gets called. But if I have to change something in the bean so that I have to redeploy the bean I can't call my business method anymore, because JCO cannot load a native library once again, as it is already loaded, This leads to an exception. So I have to restart the complete engine everytime I redeploy my bean. Are there any workarounds for this problem? I'm not sure whether this is connected to the wrong use of the JCO connection pool.
Kind regards,
Lars

How to use ENQUE and DEQUE BAPI in Visual Composer

Hi All,
We are planning to update employee Address through Portal for that one we did one BAPI which supports ADDRESS Change of an employye, through Visual Composer we developed the application and we integrated into SAP Portal but we are not able to update our records, then we found BAPI_EMPLOYEE_ENQUE and BAPI_EMPLOYEE_DEQUE, but we don't know how to use thease BAPI's in Visual Composer i mean how to make connection between out input form and thease BAPI''s and our custom BAPI's.
If any one having this experience please let me know.
Thanks in Advance.
Thanks and Regards,
Abhi.

Hi,
Nice to see your reply, we got this error in R/3 it self, when we are trying to excuting SAP Standard BAPI we are getting this error "Employee/applicant is not locked yet". I think this is bug from SAP itself, do you have any idea about this one? is there any settings we need to do in R/3 for resolving this one or else is there any data we need to maintaine for our Employee Records.
Please resolve my issue.
Thanks in Advance.
Thanks and Regards,
Abhi.

How to use direct select and insert or load to speedup the process instead of cursur

Hi friends,
I have stored procedure .In SP i am using cursur to load data from Parent to several child table.
I have attached the script with this message.
And my problem is how to use direct select and insert or load to speedup the process instead of cursur.
Can any one please suggest me how to change this scripts pls.
USE [IconicMarketing]
GO
/****** Object: StoredProcedure [dbo].[SP_DMS_INVENTORY] Script Date: 3/6/2015 3:34:03 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <ARUN,NAGARAJ>
-- Create date: <11/21/2014>
-- Description: <STORED PROCEDURE FOR DMS_INVENTORY>
-- =============================================
ALTER PROCEDURE [dbo].[SP_DMS_INVENTORY]
@Specific_Date varchar(20) ,
@DealerNum Varchar(6),
@Date_Daily varchar(50)
AS
BEGIN
SET NOCOUNT ON;
--==========================================================================
-- INVENTORY_CURSUR
--==========================================================================
DECLARE
@FileType varchar(50),
@ACDealerID varchar(50),
@ClientDealerID varchar(50),
@DMSType varchar(50),
@StockNumber varchar(50),
@InventoryDate datetime ,
@StockType varchar(100),
@DMSStatus varchar(50),
@InvoicePrice numeric(18, 2),
@CostPack varchar(50),
@SalesCost numeric(18, 2),
@HoldbackAmount numeric(18, 2),
@ListPrice numeric(18, 2),
@MSRP varchar(max),
@LotLocation varchar(50),
@TagLine varchar(max),
@Certification varchar(max),
@CertificationNumber varchar(max),
@VehicleVIN varchar(50),
@VehicleYear bigint ,
@VehicleMake varchar(50),
@VehicleModel varchar(50),
@VehicleModelCode varchar(50),
@VehicleTrim varchar(50),
@VehicleSubTrimLevel varchar(max),
@Classification varchar(max),
@TypeCode varchar(100),
@VehicleMileage bigint ,
@EngineCylinderCount varchar(10) ,
@TransmissionType varchar(50),
@VehicleExteriorColor varchar(50),
@VehicleInteriorColor varchar(50),
@CreatedDate datetime ,
@LastModifiedDate datetime ,
@ModifiedFlag varchar(max),
@InteriorColorCode varchar(50),
@ExteriorColorCode varchar(50),
@PackageCode varchar(50),
@CodedCost varchar(50),
@Air varchar(100),
@OrderType varchar(max),
@AgeDays bigint ,
@OutstandingRO varchar(50),
@DlrAccessoryRetail varchar(50),
@DlrAccessoryCost varchar(max),
@DlrAccessoryDesc varchar(max),
@ModelDesc varchar(50),
@Memo1 varchar(1000),
@Memo2 varchar(max),
@Weight varchar(max),
@FloorPlan numeric(18, 2),
@Purchaser varchar(max),
@PurchasedFrom varchar(max),
@InternetPrice varchar(50),
@InventoryAcctDollar numeric(18, 2),
@VehicleType varchar(50),
@DealerAccessoryCode varchar(50),
@AllInventoryAcctDollar numeric(18, 2),
@BestPrice varchar(50),
@InStock bigint ,
@AccountingMake varchar(50),
@GasDiesel varchar(max),
@BookValue varchar(10),
@FactoryAccessoryDescription varchar(max),
@TotalReturn varchar(10),
@TotalCost varchar(10),
@SS varchar(max),
@VehicleBody varchar(max),
@StandardEquipment varchar(max),
@Account varchar(max),
@CalculatedPrice varchar(10),
@OriginalCost varchar(10),
@AccessoryCore varchar(10),
@OtherDollar varchar(10),
@PrimaryBookValue varchar(10),
@AmountDue varchar(10),
@LicenseFee varchar(10),
@ICompany varchar(max),
@InvenAcct varchar(max),
@Field23 varchar(max),
@Field24 varchar(max),
@SalesCode bigint,
@BaseRetail varchar(10),
@BaseInvAmt varchar(10),
@CommPrice varchar(10),
@Price1 varchar(10),
@Price2 varchar(10),
@StickerPrice varchar(10),
@TotInvAmt varchar(10),
@OptRetail varchar(max),
@OptInvAmt varchar(10),
@OptCost varchar(10),
@Options1 varchar(max),
@Category varchar(max),
@Description varchar(max),
@Engine varchar(max),
@ModelType varchar(max),
@FTCode varchar(max),
@Wholesale varchar(max),
@Retail varchar(max),
@Draft varchar(max),
@myerror varchar(500),
@Inventoryid int,
@errornumber int,
@errorseverity varchar(500),
@errortable varchar(50),
@errorstate int,
@errorprocedure varchar(500),
@errorline varchar(50),
@errormessage varchar(1000),
@Invt_Id int,
@flatfile_createddate datetime,
@FtpDate date,
@Inv_cur varchar(1000),
@S_Year varchar(4),
@S_Month varchar(2),
@S_Date varchar(2),
@Date_Specfic varchar(50),
@Param_list nvarchar(max),
@Daily_Date Varchar(50);
--====================================================================================
--DECLARE CURSUR FOR SPECIFIC DATE (OR) DEALER-ID WITH SPECIFIC DATE (OR) CURRENT DATE
--====================================================================================
set @Date_Specfic = Substring(@Specific_Date,1,4) +'-'+Substring(@Specific_Date,5,2)+'-'+Substring(@Specific_Date,7,2);
set @Daily_Date = SUBSTRING(@Date_Daily,14,4) + '-' + SUBSTRING(@Date_Daily,18,2)+ '-' + SUBSTRING(@date_Daily,20,2)
IF @Daily_Date IS NOT NULL
BEGIN
Delete From [dbo].[DMS_INVENTORY_DETAILS]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[DMS_INVENTORY_AMOUNT]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[DMS_INVENTORY_VEHICLE]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[DMS_INVENTORY]
Where ID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY] where
CONVERT (date,flatfile_createddate) = CONVERT (date,GETDATE()) order by flatfile_createddate;
END
Else
BEGIN
if (@Date_Specfic IS NOT NULL AND @DealerNum != '?????')
BEGIN
Delete From [dbo].[DMS_INVENTORY_DETAILS]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[DMS_INVENTORY_AMOUNT]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[DMS_INVENTORY_VEHICLE]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[DMS_INVENTORY]
Where ID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY] where FtpDate=@Date_Specfic AND ACDealerID='ACTEST' + @DealerNum;
END
ELSE
BEGIN
Delete From [dbo].[DMS_INVENTORY_DETAILS]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[DMS_INVENTORY_AMOUNT]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[DMS_INVENTORY_VEHICLE]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[DMS_INVENTORY]
Where ID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY] where FtpDate=@Date_Specfic;
END
END
OPEN Inventory_Cursor
FETCH NEXT FROM Inventory_Cursor
INTO
@FileType ,
@ACDealerID ,
@ClientDealerID ,
@DMSType ,
@StockNumber ,
@InventoryDate ,
@StockType ,
@DMSStatus ,
@InvoicePrice ,
@CostPack ,
@SalesCost ,
@HoldbackAmount ,
@ListPrice ,
@MSRP ,
@LotLocation ,
@TagLine ,
@Certification ,
@CertificationNumber ,
@VehicleVIN ,
@VehicleYear ,
@VehicleMake ,
@VehicleModel ,
@VehicleModelCode ,
@VehicleTrim ,
@VehicleSubTrimLevel ,
@Classification ,
@TypeCode ,
@VehicleMileage ,
@EngineCylinderCount ,
@TransmissionType ,
@VehicleExteriorColor ,
@VehicleInteriorColor ,
@CreatedDate ,
@LastModifiedDate ,
@ModifiedFlag ,
@InteriorColorCode ,
@ExteriorColorCode ,
@PackageCode ,
@CodedCost ,
@Air ,
@OrderType ,
@AgeDays ,
@OutstandingRO ,
@DlrAccessoryRetail ,
@DlrAccessoryCost ,
@DlrAccessoryDesc ,
@ModelDesc ,
@Memo1 ,
@Memo2 ,
@Weight ,
@FloorPlan ,
@Purchaser ,
@PurchasedFrom ,
@InternetPrice ,
@InventoryAcctDollar ,
@VehicleType ,
@DealerAccessoryCode ,
@AllInventoryAcctDollar ,
@BestPrice ,
@InStock ,
@AccountingMake ,
@GasDiesel ,
@BookValue ,
@FactoryAccessoryDescription ,
@TotalReturn ,
@TotalCost ,
@SS ,
@VehicleBody ,
@StandardEquipment ,
@Account ,
@CalculatedPrice ,
@OriginalCost ,
@AccessoryCore ,
@OtherDollar ,
@PrimaryBookValue ,
@AmountDue ,
@LicenseFee ,
@ICompany ,
@InvenAcct ,
@Field23 ,
@Field24 ,
@SalesCode ,
@BaseRetail ,
@BaseInvAmt ,
@CommPrice ,
@Price1 ,
@Price2 ,
@StickerPrice ,
@TotInvAmt ,
@OptRetail ,
@OptInvAmt ,
@OptCost ,
@Options1 ,
@Category ,
@Description ,
@Engine ,
@ModelType ,
@FTCode ,
@Wholesale ,
@Retail ,
@Draft ,
@flatfile_createddate,
@FtpDate;
WHILE @@FETCH_STATUS = 0
BEGIN
--==========================================================================
-- INSERT INTO INVENTORY (PARENT TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY]
DMSDealerID,
StockNumber,
DMSType,
InventoryDate,
FtpDate
VALUES (@ClientDealerID,@StockNumber,@DMSType,@InventoryDate,@FtpDate);
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errortable = 'DMS_INVENTORY',
@errorstate = ERROR_STATE(),
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
-- PRINT @errornumber;
-- PRINT @errorseverity;
-- PRINT @errortable;
-- PRINT @errorprocedure;
-- PRINT @errorline;
-- PRINT @errormessage;
-- PRINT @errorstate;
set @myerror = @@ERROR;
-- This -- PRINT statement -- PRINTs 'Error = 0' because
-- @@ERROR is reset in the IF statement above.
-- PRINT N'Error = ' + @myerror;
set @Inventoryid = scope_identity();
-- PRINT @Inventoryid;
--==========================================================================
-- INSERT INTO DMS_INVENTORY_DETAILS (CHILD TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY_DETAILS]
DMSInventoryID,
StockType,
DMSStatus,
LotLocation,
TagLine,
Certification,
CertificationNumber,
CreatedDate,
LastModifiedDate,
ModifiedFlag,
PackageCode,
OrderType,
AgeDays,
OutstandingRO,
Memo1,
Memo2,
Purchaser,
PurchasedFrom,
DealerAccessoryCode,
InStock,
AccountingMake,
SS,
Account,
AccessoryCore,
ICompany,
InvenAcct,
Field23,
Field24,
SalesCode,
Draft,
FTCode,
FtpDate
VALUES (
@InventoryID,
@StockType,
@DMSStatus,
@LotLocation,
@TagLine,
@Certification,
@CertificationNumber,
@CreatedDate,
@LastModifiedDate,
@ModifiedFlag,
@PackageCode,
@OrderType,
@AgeDays,
@OutstandingRO,
@Memo1,
@Memo2,
@Purchaser,
@PurchasedFrom,
@DealerAccessoryCode,
@InStock,
@AccountingMake,
@SS,
@Account,
@AccessoryCore,
@ICompany,
@InvenAcct,
@Field23,
@Field24,
@SalesCode,
@Draft,
@FTCode,
@FtpDate
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errorstate = ERROR_STATE(),
@errortable = 'DMS_INVENTORY_DETAILS',
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXECUTE [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
--==========================================================================
-- INSERT INTO DMS_INVENTORY_AMOUNT (CHILD TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY_AMOUNT]
DMSInventoryID,
AllInventoryAcctDollar,
OtherDollar,
PrimaryBookValue,
AmountDue,
LicenseFee,
CalculatedPrice,
OriginalCost,
BookValue,
TotalReturn,
TotalCost,
DlrAccessoryRetail,
DlrAccessoryCost,
DlrAccessoryDesc,
InternetPrice,
InventoryAcctDollar,
BestPrice,
Weight,
FloorPlan,
CodedCost,
InvoicePrice,
CostPack,
SalesCost,
HoldbackAmount,
ListPrice,
MSRP,
BaseRetail,
BaseInvAmt,
CommPrice,
Price1,
Price2,
StickerPrice,
TotInvAmt,
OptRetail,
OptInvAmt,
OptCost,
Wholesale,
Retail,
FtpDate
VALUES (
@InventoryID,
@AllInventoryAcctDollar,
@OtherDollar,
@PrimaryBookValue,
@AmountDue,
@LicenseFee,
@CalculatedPrice,
@OriginalCost,
@BookValue,
@TotalReturn,
@TotalCost,
@DlrAccessoryRetail,
@DlrAccessoryCost,
@DlrAccessoryDesc,
@InternetPrice,
@InventoryAcctDollar,
@BestPrice,
@Weight,
@FloorPlan,
@CodedCost,
@InvoicePrice,
@CostPack,
@SalesCost,
@HoldbackAmount,
@ListPrice,
@MSRP,
@BaseRetail,
@BaseInvAmt,
@CommPrice,
@Price1,
@Price2,
@StickerPrice,
@TotInvAmt,
@OptRetail,
@OptInvAmt,
@OptCost,
@Wholesale,
@Retail,
@FtpDate
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errortable = 'DMS_INVENTORY_AMOUNT',
@errorstate = ERROR_STATE(),
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
--==========================================================================
-- INSERT INTO DMS_INVENTORY_VEHICLE (CHILD TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY_VEHICLE]
DMSInventoryID,
InteriorColorCode,
ExteriorColorCode,
Air,
ModelDesc,
VehicleType,
VehicleVIN,
VehicleYear,
VehicleMake,
VehicleModel,
VehicleModelCode,
VehicleTrim,
VehicleSubTrimLevel,
Classification,
TypeCode,
VehicleMileage,
FtpDate,
EngineCylinderCount
VALUES (
@InventoryID,
@InteriorColorCode,
@ExteriorColorCode,
@Air,
@ModelDesc,
@VehicleType,
@VehicleVIN,
@VehicleYear,
@VehicleMake,
@VehicleModel,
@VehicleModelCode,
@VehicleTrim,
@VehicleSubTrimLevel,
@Classification,
@TypeCode,
@VehicleMileage,
@FtpDate,
@EngineCylinderCount
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errortable = 'DMS_INVENTORY_VEHICLE',
@errorstate = ERROR_STATE(),
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
--==========================================================================
-- MOVE CURSUR TO NEXT RECORD
--==========================================================================
FETCH NEXT FROM Inventory_Cursor
INTO @FileType ,
@ACDealerID ,
@ClientDealerID ,
@DMSType ,
@StockNumber ,
@InventoryDate ,
@StockType ,
@DMSStatus ,
@InvoicePrice ,
@CostPack ,
@SalesCost ,
@HoldbackAmount ,
@ListPrice ,
@MSRP ,
@LotLocation ,
@TagLine ,
@Certification ,
@CertificationNumber ,
@VehicleVIN ,
@VehicleYear ,
@VehicleMake ,
@VehicleModel ,
@VehicleModelCode ,
@VehicleTrim ,
@VehicleSubTrimLevel ,
@Classification ,
@TypeCode ,
@VehicleMileage ,
@EngineCylinderCount ,
@TransmissionType ,
@VehicleExteriorColor ,
@VehicleInteriorColor ,
@CreatedDate ,
@LastModifiedDate ,
@ModifiedFlag ,
@InteriorColorCode ,
@ExteriorColorCode ,
@PackageCode ,
@CodedCost ,
@Air ,
@OrderType ,
@AgeDays ,
@OutstandingRO ,
@DlrAccessoryRetail ,
@DlrAccessoryCost ,
@DlrAccessoryDesc ,
@ModelDesc ,
@Memo1 ,
@Memo2 ,
@Weight ,
@FloorPlan ,
@Purchaser ,
@PurchasedFrom ,
@InternetPrice ,
@InventoryAcctDollar ,
@VehicleType ,
@DealerAccessoryCode ,
@AllInventoryAcctDollar ,
@BestPrice ,
@InStock ,
@AccountingMake ,
@GasDiesel ,
@BookValue ,
@FactoryAccessoryDescription ,
@TotalReturn ,
@TotalCost ,
@SS ,
@VehicleBody ,
@StandardEquipment ,
@Account ,
@CalculatedPrice ,
@OriginalCost ,
@AccessoryCore ,
@OtherDollar ,
@PrimaryBookValue ,
@AmountDue ,
@LicenseFee ,
@ICompany ,
@InvenAcct ,
@Field23 ,
@Field24 ,
@SalesCode ,
@BaseRetail ,
@BaseInvAmt ,
@CommPrice ,
@Price1 ,
@Price2 ,
@StickerPrice ,
@TotInvAmt ,
@OptRetail ,
@OptInvAmt ,
@OptCost ,
@Options1 ,
@Category ,
@Description ,
@Engine ,
@ModelType ,
@FTCode ,
@Wholesale ,
@Retail ,
@Draft ,
@flatfile_createddate,
@FtpDate;
END
CLOSE Inventory_Cursor;
DEALLOCATE Inventory_Cursor;
SET ANSI_PADDING OFF
END
Arunraj Kumar

Thank you.
And another question if the data is already there in the child table if i try to load alone it must delete the old data in the child tablee and need to get load the new data and
How to do this ?
Arunraj Kumar
You can do that with an IF EXISTS condition
IF EXISTS (SELECT 1
FROM YourChildTable c
INNER JOIn @temptable t
ON c.Bkey1 = t.Bkey1
AND c.Bkey2 = t.Bkey2
DELETE t
FROM YourChildTable c
INNER JOIn @temptable t
ON c.Bkey1 = t.Bkey1
AND c.Bkey2 = t.Bkey2
INSERT INTO YourChildTable
where Bkey1,Bkey2 etc forms the business key of the table
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

How to use Temporary Table in PL-SQL

In MySQL there is no Temporary table concept.
So for intermediate calculation I have created a table as below
create table SequenceTempTable
SessionId VARCHAR(50),
Sequence VARCHAR(500),
CreatedDate DATE
) ENGINE=MEMORY;
Whenever I invoke a SP, I load the data into SequenceTempTable using Session Id as below
CREATE PROCEDURE `GetSequence`(
IN Start_Date VARCHAR(25),
IN End_Date VARCHAR(25)
BEGIN
SELECT UUID() INTO v_SessionId;
INSERT INTO SequenceTempTable values (v_SessionId,'1,2,5,3',now());
required code
DELETE FROM SequenceTempTable WHERE SessionId = v_SessionId;
COMMIT;
END;
i.e. I have created a table as temporary table (created once),
and load the data using Session Id and once session specific intermediate computation done,
I deleted the session specific data.
Could you give me examples of How to use Temporary table in PL-SQL code with respect to my above example.
Because I have gone through creating Temporary table but I stuck with use in PL-SQL. I mean to say Is there any need of creating table in advance before invoking SP.
And one more thing as in MySQL temp table I created which is using MEMORY engine i.e. this table will always be in MEMORY so there is no need of writing data on disk.
Regards
Sanjeev

Hi Sanjeev
Read about GTT here
http://www.oracle-base.com/articles/8i/TemporaryTables.php
GTT always contains just session specific data. \
In case you want to use the GTT in the same session again you can use option
ON COMMIT PRESERVE ROWS;
Or if it is used just once in the session use can use
ON COMMIT DELETE ROWS;
Do remember that for GTT the data of one session can not be accessed in other session.
Also you can go away with Delete from GTT if not used again in same session.
Regards
Arun

How to use engin to excute a sequnecefi​le through TS API

Similar Messages

Maybe you are looking for

How to use engin to excute a sequnecefile through TS API