Fault Message for inbound asynch ABAP proxy

Hi All,
I've got scenario File -> XI -> ABAP proxy all asynchronous.
Inside a proxy I'm throwing an exception using fault message.
I don't see application error in SXMB_MONI on XI, I can see that only in SXMB_MONI on receiving system.
Is it possible to have flag Application Error on XI monitor as well ?
Best Regards,
Tomasz

Jai,
I've checked that many times.
I'll describe my scenario in more details.
1. From the file I'm receiving a lot of items and trying to process as much as possible in one proxy call.
2. Those ones which are causing errors are sent out to XI (outbound proxy) one by one. XI sends them to the same interface which is used in 1. step where I have condition which checks for single item and when it's wrong then exception is thrown.
One SCM box is sender and receiver which my cause that problem.
Tomasz

Similar Messages

  • Handling Fault Messages for JDBC Receiver (Syn Inbound)

    Dear Freinds,
    Can we handle fault messages for JDBC Receiver which is synchronous.
    OB Proxy Syn  <>  IB JDBC Syn
    1. How to handle the same ? Please give some examples.
    2. Should we use Stored Procedures at Oracle side to handle the fault messages and send back as response to the Proxy Response. Will it work.
    Thanks & Regards
    K.Ramesh

    Dear Friend,
    I have 2 interfaces where Proxy is OB & JDBC is IB. In the first interface both sender and Receiver are synchronous and in the second one it is Async.
    In the first interface i have to send one field from R/3 table along with Native SQL query string to XI and the response of the SELECT query is sent back to the sender.
    Assume if no fields are selected based on the field sent then proper error message has to be sent instead of the response message.
    In the second interface i will be using UPDATE query at Asyn JDBC receiver.
    How to do this if you are having JDBC Receiver.
    I saw in many blogs where they had mentioned that we cannot handle fault messages in the Receiver JDBC.
    KIindly explain.
    Thanks
    K.Ramesh

  • Can we edit SOAP Header for an Outbound ABAP Proxy message?

    Hi,
    Can we add some information such as dynamic configuration to the SOAP header for the outbound ABAP Proxy from ABAP report in SAP Application System?
    Regards,
    Praveen Gujjeti.

    Hi Praveen, have you found soulution for this? Can you share it with me?
    From here http://help.sap.com/saphelp_nw70/helpdata/EN/d6/49543b1e49bc1fe10000000a114084/content.htm
    The help described that:
    Set logging in the message header. This means that this message is logged even if logging is deactivated explicitly in the configuration. The logging information is part of the message header:
    ¡        <SAP:Logging>1</SAP:Logging>
    Activates logging explicitly.
    ¡        <SAP:Logging>0</SAP:Logging>
    Deactivates logging explicitly.
    So it means that we can edit SOAP header for outbound ABAP proxy. But i haven't find the correct method to do that.

  • Exception Handling in Inbound Synchronous ABAP Proxy

    Hi All,
    I am implementing inbound synchronous proxy which has inbound ,outbound and fault message ( same of SAP-PI).
    I am calling a FM inside inside the method. All the business logic is coded in the FM which also handles the exception.
    The exception raised in the FM is captured in the MESSAGE table of type BAPIRET2.
    During testing I found that the exception raised inside the FM( Message Table) is not passed to Fault message
    which is in the proxy method( If sy-subrc 0, raise excption type MT_FaultMessage was coded after FM).
    I found 5 instance under the Fault message exception.IF_MESSAGEGET_TEXT , IF_MESSAGEGET_LONGTEXT ,IF_AI_APPLICATION_FAULT~GET_RT_FAULT_TEXT,
    GET_SOURCE_POSITION and CONSTRUCTOR.
    Kindly provide the input how to pass the error text captured in MESSAGE TABLE of FM to the exception message MT_FaultMessage of Proxy
    Regards
    Alice Rebecca

    Hi Alice ,
    Please have a look at the below document which contains ways to handle different errors and exception.If you still have doubts please revert back .
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502a7f0e-e5d9-2910-5aa2-976a8ed8384f?QuickLink=index&overridelayout=true]
    For more specific i.e to handle the retrun message from a BAPI go through the below link .I assuming that you have exception class  already created and it is available in the Exception tab of the execute_synchronus .
    [http://help.sap.com/saphelp_nw04/helpdata/en/25/a45c3cff8ca92be10000000a114084/frameset.htm]
    Thanks,
    Anjaneya .
    Edited by: Anjaneya Bhardwaj on Jan 13, 2012 6:26 AM

  • ABAP - INTERFACE_REGISTRATION_ERROR for outboud sync ABAP proxy

    Hi,
    I have created ABAP sync client proxy in R/3 and trying to test using abap report. I am facing following error in XI sxmb_moni.
    I have created client proxy for outbound sync interface, however the error is pointing inbound sync interface  (ie QAChkR3_Sync_Mimicking).
    Even I tried creating proxy for given inbound interface but same error exists.
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIProxy</SAP:Category>
      <SAP:Code area="ABAP">INTERFACE_REGISTRATION_ERROR</SAP:Code>
      <SAP:P1>ifmmessif</SAP:P1>
      <SAP:P2>QAChkR3_Sync_Mimicking</SAP:P2>
      <SAP:P3>http://ls.att.com/Exacta/QACheck_Mimicking</SAP:P3>
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>No implementing class registered for the interface (type ifmmessif, name <u>QAChkR3_Sync_Mimicking</u>, namespace http://ls.att.com/Exacta/QACheck_Mimicking )</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Please help.
    Pratibha.

    Hi Krishna,
    Proxy in R/3 is reactivated still the error persists.
    There are few more o/b proxies which are running fine.
    Even LPCONFIG txn is done properly.
    I wonder why the error is for inbound proxy when I am trying to test outbound sync proxy.
    I dont have sap marketplace id to check the given notes. Will you pls brief about it.
    Pratibha.

  • Inbound synchronous ABAP proxy in PI 7.1?

    Hi All,
    Can anyone provide me sample ABAP proxy code for inbound synchronous. I have created inbound synchronous service interface, generated proxy in ABAP system. It has only one method in ABAP proxy class with input and output. When I write code ti take the input, process and send an output, its not getting delivered.
    Please help me with sample code or guidence on this. Looks like there are changes in 7.1 when compared with previous versions that EXECUTE_SYNCHRONOUS doesn't exist anymore.Do we just eed to write code in single method with in the class?
    Regards,
    N@v!n

    On Sproxy - >
    Focus on your interface - >
    go to your inbound interface name(service interface) -> double click
    On PROPERTIES TAB -> INTERFACE -> PROVIDER CLASS -> DOUBLE CLICK ON IT ->
    Now One method name is coming - > Double click on it ->
    Congarts ! you will write your code Here ...
    I am Pasting a sample code used in my case , similarly you can compare for your self. :
    __________________________________________________________ Declare Area
    DATA:   IT_INPUT    TYPE  ZPROCESS_ORDER_FILE_ROW_TAB2,
                  WA_INPUT    TYPE  ZPROCESS_ORDER_FILE_ROW2.
    DATA:   IT_FINAL   TYPE  ZPROCESS_ORDER_RESPONSE_RO_TAB,
                  WA_FINAL   TYPE  ZPROCESS_ORDER_RESPONSE_ROW.
    I get this Types from
    go to your inbound interface name(service interface) -> double click
    USED OBJECT TAB
    Here you will get  2 table type Structure for Internal table Finaland Input Both.
    as well as Work area Types.
    _________________  Actual Code -
    IT_INPUT = INPUT-PROCESS_ORDER_FILE-ROW.
    This Structure you get in
    go to your inbound interface name(service interface) -> double click
    USED EXTRENAL VIEW TAB.
    Use ABAP NAME HERE ..
    Populate IT_FINAL according to you and pass it out.
    SImialry for sending Out ....
    OUTPUT-PROCESS_ORDER_RESPONSE-ROW = IT_FINAL.
    Hope it help...
    Still Doubts , Write here ...
    Regards
    Prabhat Sharma.

  • A sample web service to return SOAP fault message for application error

    Hi,
    I need to test behavior of XI, in case of application error (using <detail> tag in soap:fault) from web service in nosoap mode.
    If any one is aware of a free web service, which can raise application soap fault message, Kindly provide the details.
    Thanks in Advance,
    Rahul..

    Hi,
    What is the URL to which you are posting the SOAP message?
    Is it?
    http://<host>:<j2ee-port>/XISOAPAdapter/MessageServlet? channel=<party>:<service>:<channel>
    If yes, then like mentioned the QOS is picked from the Sender SOAP adapter.
    But, if the URL is ,
    http://<server>:<ABAP-port>/sap/xi/engine?type=entry&version=3.0&Sender.Service=<YourService>&Interface=<YourNamespace>%5E<YourInterface> 
    Then you need to give the QOS as <b>,&QualityOfService=ExactlyOnce</b> appended to the above URL.
    More, /people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
    Regards
    Bhavesh

  • Exchange Fault message Structure not tranported in Proxy

    Hi,
    I have an Issue with the Proxy Object transport.
    We have transported from PDO to PDQ.... But when I checked in, Internal View or External View Tab, Under Exceptions I cant fault Mesage structure being Transported and thus throwing error while syntax error as Exchange Fault message not found.
    Any help would be appreciated.
    Regards,
    Varun

    > So as you said, If i include this structure to old transport, that will do ?
    No, you have to create a new transport where you include all objobt from old transport and the two structures for ExchangeFaultData and ExchangeLogData.
    If you do not know how to do this, let your basis team help you.
    > Does Regenerate Proxy will help now ? How to include that structure when regerating proxy again
    Now, this won't help, as the objects will not be created when they are already available.

  • Configuring Fault Message For the Send Synchronous step

    Hi,
    PI receives a file and sends a soap request to Third pary system. If the data sent to third party system is correct, PI receives a empty soap envelopre. If the data is not approriate, PI receives an fault message(Application Error).PI has to trigger an email in either case.
    I have configured a send synchronous step to initiate Request/Response with a validation fault, followed with send step for triggering an email.once the interface is executed, The process is not moving further from Send synchronous step.In short the steps after send synchronous are not being executed.
    Regards,
    Kiran.

    Hi,
           I have created exception branch if PI receives a validation fault. PI will trigger success email, if the PI receives blank response from third system.PI will trigger failure email, if PI receives a fault message.
    Regards,
    Kiran.

  • How to use fault message for error handling.

    HI
    Anybody has an idea about how we use fault messages to handle errors in XI
    Thanks
    Debraj

    Hi,
    Refer this link. This pdf file has descriptions about fault message types and how to use it.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4cdfc390-0201-0010-2197-da4ada09f281
    Regards,
    Uma

  • Forwarding Application Error in ABAP Proxy to CCMS

    Hi,
    We are using fault messages for inbound ABAP proxy interfaces to capture application errors, and we can see the error in the monitoring of ECC. However, Is there a way, we can forward it to CCMS of ECC (and not XI), because we want to use an external tool linked to CCMS via SOLMAN to get alerted in case of application errors.
    Best regards,
    Rahul Kumar

    Is there a way of getting the above thing done? I have a very similar Issue.
    Rahul if you have found out a way of doing the same please let me know by email. [email protected]
    Thanks,
    Karthik

  • Forwarding ABAP Proxy Application errors to CCMS of ECC

    Hi All,
    We are using fault messages for inbound ABAP proxy interfaces to capture application errors, and we can see the error in the monitoring of ECC. However, Is there a way, we can forward it to CCMS of ECC (and not XI), because we want to use an external tool linked to CCMS via SOLMAN to get alerted in case of application errors.
    thanks,
    Karthik

    Solved on my own.
    If you need information please contact [email protected]

  • Fault message handling in abap client proxy

    Hi experts,
    i have scenario like this SAPECC---XI---WEBservice
    i was decided to using the ABAP CLIENT proxy in sender side and soap adapter communication in receiver side
    i will be get the wsdl file form client
    problem is i am in bit of confusion like  am i need to create fault message for this asychronous scenario?
      how can i create the fault message for this scenario(that WSDL) and how the abaperwill  handle those error
    thanks in advance

    Hi.
    You can use fault message but it won´t return a error to your ABAP Proxy because your interface is ASSYNC. The fault message generated will stop in Adapter Engine.
    If you need a return of the error, you have to change your interface to Sync mode.
    To get more information, follow the link below:
    Fault Message Type
    http://help.sap.com/saphelp_nwpi711/helpdata/en/dd/b7623c6369f454e10000000a114084/frameset.htm
    Best Regards.
    Bruno

  • [MESSAGE.GENERAL] How can take the actual error text for ABAP proxy error?

    Hi...
    I'm a ABAPer.
    I got to create outbound abap proxy for synchronous server proxy and described below.
    My problem is program can not catch the actual error message when occurred error during send data to XI.
    The return message is just 'MESSAGE.GENERAL'.
    But according to the XI part, 'Key error' is actual reason.
    So... how can i take the actual error text like 'Key error'?
    <b>* Only MESSAGE.GENERAL is return message for all kind of errors.</b>
    Thanks.
    Below----
      TRY.
          CREATE OBJECT abap_proxy.
          CALL METHOD abap_proxy->execute_synchronous
            EXPORTING
              output = gs_out
            IMPORTING
              input  = gs_in.
      Exception Handling
    <b>    CATCH cx_ai_system_fault  INTO  go_sys_exception.
          g_sys_result = go_sys_exception->get_text( ).</b>
        CATCH cx_ai_application_fault INTO go_app_exception.
          g_app_result = go_app_exception->get_text( ).
      ENDTRY.
      COMMIT WORK.
    Return status 'D' is succeeded.
      if  gs_in-sales_group_rer_sap-xstat <> 'D'. 
         WRITE:/ 'System Error Message      :', g_sys_result.
         WRITE:/ 'Application Error Message :', g_app_result.
      endif.
    *--Result--
    System Error Message      : MESSAGE.GENERAL
    Application Error Message :
    Message was edited by: Miju cho
    Message was edited by: Miju cho

    Thanks guys, this was useful.
    My scenario is for Asynchronous communication.
    I guess Fault messages are used in case of Synchronous communication for handling application errors. So if there was something wrong at the JDBC end then I could use the fault messages.
    Have i got this right?
    I also came across this piece on Acknowledgements. But is says that they can be used with the following Receivers:
    The following receivers support acknowledgments:
    ABAP and Java proxies (XI 3.0 SP1 for the latter)
    Integration processes
    IDocs (note that IDocs only return acknowledgments when they have been configured using the ALE audit)
    Receiver adapters support system acknowledgments but not application acknowledgments
    My Receiver is JDBC. So I guess I cannot use acknowledgements either.
    Hence, I need to know what I can do to replicate the system errors eg. failed server etc...so that I can get catch these errors during sending.
    I'll tell you abt what happened earlier.
    My XI server was down. I executed the code for the sender ABAP Proxy and it did not catch the error. In SXMB_MONI in the R/3 system, I could see the messages queued up. When the XI server started, the messages were transferred to XI.
    I need to handle such errors...ie. If  the server is down or message did not reach XI then my ABAP program that sends data via ABAP proxy needs to know that something went wrong.
    Thanks and Regards,
    Ashwin

  • Error Handling for ABAP Proxy sender

    Hello Everyone,
    I am trying out a scenario of SAP R/3 to Oracle database (ABAP Proxy to JDBC).
    I have the following code and it works fine.
    CALL METHOD prxy->execute_asynchronous
          EXPORTING
            output = it.
         commit work
      CATCH cx_ai_system_fault .
        DATA fault TYPE REF TO cx_ai_system_fault .
        CREATE OBJECT fault.
        WRITE :/ fault->errortext.
    I know that the above Catch block would be used to handle system errors on the sender side.
    Please tell me what kind of errors could these be and what I can do to test these errors. ie. I want to  create error situations explicitely and see how they are handled.
    Thanks and Regards,
    Ashwin

    Thanks guys, this was useful.
    My scenario is for Asynchronous communication.
    I guess Fault messages are used in case of Synchronous communication for handling application errors. So if there was something wrong at the JDBC end then I could use the fault messages.
    Have i got this right?
    I also came across this piece on Acknowledgements. But is says that they can be used with the following Receivers:
    The following receivers support acknowledgments:
    ABAP and Java proxies (XI 3.0 SP1 for the latter)
    Integration processes
    IDocs (note that IDocs only return acknowledgments when they have been configured using the ALE audit)
    Receiver adapters support system acknowledgments but not application acknowledgments
    My Receiver is JDBC. So I guess I cannot use acknowledgements either.
    Hence, I need to know what I can do to replicate the system errors eg. failed server etc...so that I can get catch these errors during sending.
    I'll tell you abt what happened earlier.
    My XI server was down. I executed the code for the sender ABAP Proxy and it did not catch the error. In SXMB_MONI in the R/3 system, I could see the messages queued up. When the XI server started, the messages were transferred to XI.
    I need to handle such errors...ie. If  the server is down or message did not reach XI then my ABAP program that sends data via ABAP proxy needs to know that something went wrong.
    Thanks and Regards,
    Ashwin

Maybe you are looking for