How to use Filter commands in WAD?

Hello community,
I am desperately trying to use the command wizzard in order to set a Filter to a chrarcateristic in an 7.0 web template:
I have been trying these commands so far but it simply doesnt work:
SET_SELECTION_STATE_SIMPLE
SET_SELECTION_STATE
My problem is: When I select the charcateristic which I want to Filter, I get always the Error message, that the characteristic is not a valied characteristic or structure of the Query. But this is not true, the Characteristic is in the query. I have tried for hours now but no success.
Thanks for any help or advice.
Carl

Hi Carl,
I had the same situation. All you have to do is to update your support package. After that it will work properly.
I have - Support Package 7, Revision 571
Regards
Erwin
Edited by: Erwin Buda on Dec 5, 2008 9:47 PM

Similar Messages

How to use STSADM commands in sharepoint 2007

How to use STSADM commands in sharepoint 2007

Hi,
There is no such STSADM commands to get the user groups. There are two separate STSADM commands get either users or groups for particular site.
STSADM -o enumusers <<url>>
STSADM -o enumgroups <url>
For complete reference, please refer to the following article.
http://blogs.technet.com/b/josebda/archive/2008/03/15/complete-reference-of-all-stsadm-operations-with-parameters-in-moss-2007-sp1.aspx
One such console application available to get the user groups. Please refer to the below article.
List all SharePoint groups a user belongs to
Please don't forget to mark it as answered, if your problem resolved or helpful.

How to control filter values in WAD without effecting the layout of output

Hi,
Anyone help me in how to control the filter values in WAD. We have a navigational block and when user selects the filter for values the key and name of the characteristics and displaying in the navigational block and because of this the format of the output is looking awkward ie., getting horizontal and vertical scroll bars.
So the requirement is i have select the characteristics from the filter and i also need text and name of the characteristics to be dispalyed but this shouldn't effect the layout of the output.
So anyone please tell me the possible solution.
Your help will be appreciated.

MeeHow wrote:
next example: 0 1 2 3 4 9 6 7 8 <- bad value is 9, and result of my filter should be (4+6)/2 = 5
Shouldn't e.g. the value 4 be outside too, because the average of 3 and 9 (=5.5) is more that 25% different to 4?
Here is a quick draft comparing three versions (LabVIEW 8.2):
Your formula node version
the same algorithm in G
Something along the lines you are proposing here.
As you can see, the new idea is not quite satisfactory. It needs more thought. Still, these drafts should give you some ideas how to do it. Modify as needed.
Also your data is similar to a square wave and has these large step functions where the value changes dramatically. These should probably be ignored. Maybe you should look at the first derivative and replace parts where a large positive slope is immediately followed by a negative slope of similar size, for example.
You should also look at absolute steps instead of percentages. If you use percentages and the value is zero, everything is outside, because even 5000% of zero is still zero, right?
LabVIEW Champion . Do more with less code and in less time .
Attachments:
filter testMOD.vi ‏41 KB

How to use Filter in ActionServlet

hi how do i use filter in my ActionServlet ?
here is a code :
package test;
import java.io.*;
import java.util.*;
import javax.servlet.*;
public class TimeFilter implements Filter {
public void init(FilterConfig config) throws ServletException {
public void doFilter(ServletRequest request, ServletResponse response,
    FilterChain chain) throws IOException, ServletException {
    int hour = Calendar.getInstance().get(Calendar.HOUR_OF_DAY);
    // only service the request between 08:00 and 17:59
    if (hour >= 8 && hour <= 17) {
      chain.doFilter(request, response);
    // for other times, forward the request to someplaceelse
    } else {
      request.getRequestDispatcher("/someplaceelse").forward(request, response);
public void destroy() {
}where do i place it in my ActionServlet to get filtered access ?
My ActionServlet :
import javax.servlet.http.*;
import org.apache.struts.action.*;
import java.io.*;
import java.util.*;
public final class SubmitAction extends Action {
public ActionForward perform(ActionMapping mapping,
      ActionForm form,
      HttpServletRequest request,
      HttpServletResponse response) {
      DynaActionForm SubmitForm = (DynaActionForm) form;
     // blah
    // blah
return (mapping.findForward("success"));
}can ActionServlet use filter ?
How do i use the Filter class in ActionServlet if i want to get filtered Aceess of the website ?

Ok, this is how filters work.
Typically the filter maps to '/*' and your action servlet maps to '/*.do'. So if you request 'login.do', then the filter would first be called. If it's not between 08:00 and 16:59, the request will be passed on to the action servlet, else it would be forwarded to the action servlet.
There's no need to 'integrate' the filter into you action servlet.

How we use merge command in pro*C

merge command not support the pro*C pl/sql block how we use in pro*C (without creating any pl block on database )

hello shalab,
u can use dynamic sql method one.for execution merge query.
syntax is
EXEC SQL EXECUTE IMMEDIATE :stmt
u have to copy your query into one string.
like this
strcpy(stmt,"merge into emp_new a ");
strcat(stmt," using emp b ");
strcat(stmt,"on ( a.empno = b.empno) ");
strcat(stmt," when matched then ");
strcat(stmt," update set sal= sal*10 ");
strcat(stmt," when not matched then ");
strcat(stmt," insert (a.empno, a.ename) values ");
strcat(stmt," (b.empno, b.ename); ");
then execute like this.
EXEC SQL EXECUTE IMMEDIATE :stmt

How to use host command for creating folders

i want to create a folder called abc in my C drive using forms 6i.
how can i do it using Host command?

Host('MD C:\ABC');Francois

How to use filter for data tables? Important topic but no docs/examples.

I was looking at the TableRowGroup APIs:
http://developers.sun.com/prodtech/javatools/jscreator/reference/docs/apis/webui/index.html
and looks like it has getTableDataFilter and setTableDataFilter methods. Sounds to me, that we can use TableDataFilter to filter rows that are displayed. For example, we can provide users with a drop down list of fields to choose from, and input field to enter the value of the selected field, so that they can narrow down the rows to search for specifics row(s) they are looking for.
I have not seen any example, or enough documentation, to figure out how to use this filter. Since JSC is new, there are not too many resources out there or on web for such specific issues. Any gurus out there?
Thanks

Creator Team: Data filtering tutorial is over due now. This is something that will be useful to most developers. We all want to display users some data and want to provide user ability to filter it down based on some criteria, i.e. display rows within a date range, display all rows that have certain value or a field, etc. If there is a built-in filter in TableRowGroup, why not document it adequately along with some examples and a tutorial?
This is one of the key elements of Microsoft/VS.NET market share -- provide tons of example/tutorials/advanced code/books/3rd party books, etc. Why can't other companies follow a well-proven success element? In spite of making a better product, the can end up loosing or not gaining enough share, because of this lack of attention.

How to use 'bash' command in java?

Hi,
I am using Linux operating system
when i run the following code, 'test.sh' not started
================================================================
String cmd = "bash \"/home/kulandaivelu/Desktop/works/other's works/test.sh\"";
Runtime.getRuntime().exec(cmd).waitFor();
================================================================
but it started when i use same command(bash "/home/kulandaivelu/Desktop/works/other's works/test.sh") in terminal
anyone let me know what mistake i made in the code piece..
Thanks in Advance
Kulandaivelu

Hi,
thanks a lot..
I used the following code.. it worked well..
===============================================================
String cmd[] = {"bash","/home/kulandaivelu/Desktop/works other's/test.sh"};
Runtime.getRuntime().exec(cmd).waitFor();
===============================================================
Thanks a lot again..

How to use FILTER -- USING in rpd???

Can we use FILTER USING in rpd ?

Yes in the 'use existing logical columns as the source' window of a measure.
Its under Functions - Display Functions in the expression builder.

How to use split command in upload program

Thanks for all ...for their quick response for my previous query.
Iam continuing with the same upload program,now i have transfered the data from internal table to application server,now iam trying to upload this to database,while doing this iam using split command for spliting the records,but its not at all spliting,can u give me a solution for this.

OPEN DATASET p_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
if sy-subrc <> 0.
    PERFORM messaging USING 'E' '001' text-e10 p_file space space.
else.
    DO.
      READ DATASET P_file INTO WA .
      IF SY-SUBRC <> 0.
        EXIT.
      ENDIF.
      REPLACE ALL OCCURRENCES OF '"' IN WA WITH ''.
      CONDENSE WA NO-GAPS.
      SPLIT WA AT CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
      INTO wa_infile.
      append wa_infile to it_infile.
      clear wa_infile.
    ENDDO.
endif.
try this...
vijay

How it use Filter Id and FilterPanelFocusid in JSF Table component

How it use FilterId and FilterPanelFocusid in JSF Table component

How it use FilterId and FilterPanelFocusid in JSF Table component

How to use Radio buttons in WAD to select different condition in a query

Hi Guru,
I am new to WAD, I want to use radio buttons in selection screen of query for different selections based on selection criteria. I am aware of executing different queries using different radio buttons. but i want to use single queries for different radio button selections.
I have found some relevant topic to it but not got exact solution. Please guide me.

Hi Avinash,
Drag a DropDown webitem into your template. Under DropDown webitem properties, Data Binding -> Fixed List of Options.
Fixed Option -> Action -> Command via Command Wizard, Command -> Commands for Data Providers -> Data Provider Commands for Filter Values -> SET_SELECTION_STATE_SIMPLE. Data Provider Affected -> choose the main DP Query here. Characteristic -> choose Employee Group characteristic here as present in your DP Query. Sign -> INCLUDING, Operator -> EQUAL_SELECTION, Equals -> MEMBER_NAME, Member Name -> specify the value here i.e. Employee1 etc.
Repeat above Fixed Option step for Employee2, Employee3 etc. selections. For 'All' option choose Command CLEAR_SELECTION_STATE with Data Provider Affected as the main DP Query & Characteristic as Employee Group.
--Priya

MDX : How to use filter on a dimension without showing it OR merge 2 attributes of the same dimension?

Hello everyone,
I'm kind of newbie with MDX language, I'm trying to get filtered measures from a cube with a specific layout.
Here is my exemple :
I want to get all the "order numbers" where the "invoice" cost is more than 300. Each invoice is linked with an ID, one order number can have several invoices.
So what I do is a select request with 2 dimensions : "order num" and "id_invoice"
Here is the result : I get all the cost sorted by "order num" and I can easealy identify those who are above 300
order num
Id_invoice
cost
Total
Total2
15450307
10032013094498
1671
1737
ok
15450307
10032013099835
66
1737
KO
15450596
10032013094078
8524
8524
ok
15451214
10032013094119
228
4348
KO
15451214
10032013097069
978
4348
ok
15451214
10032013097071
3142
4348
ok
15542434
10032013101736
142
142
KO
15550064
10032013097016
1261
1261
ok
15550346
10032013097586
2252
2252
ok
15550353
10032013098446
2617
2617
ok
What i need : In "cost", I need to have the sum of each cost which are above 300 in one line (without showing the invoice id)
order num
cost
Total
Total2
15450307
1671
1737
ok
15450596
8524
8524
ok
15451214
4120
4348
ok
15550064
1261
1261
ok
15550346
2252
2252
ok
15550353
2617
2617
ok
How is it possible to use a filter on a dimension without showing it or merge 2 attributes of the same dimension ?
The problem is that if I show "id" column, the filter doesn't work properly : it compares 300 with the total cost of the whole order and does not compare with each invoice (which could be under 300 ! - see "KO" in Total2 column)
Here is the request I use to generate this result :
with
member [Measures].[Total]
as (
[TP].[ID INVOICE].[All],
[TP].[ORDER NUM].currentmember,
[Measures].[COST]
member [Measures].[Total2]
as (
IIF([Measures].[COST] >
300, "ok",
"KO")
select
{[Measures].[COST],[Measures].[Total],[Measures].[Total2]}
on
columns,
Filter
             [TP].[ORDER NUM].[ORDER
NUM].members *
             [TP].[ID INVOICE].[ID
INVOICE].members
             ,[Measures].[COST]
> 0
on
rows
FROM [MYCUBE]
Thank you for your help !
Kind regards,
Olivier.

Hi Olivier,
hereunder a similar query against the AW. For all order numbers, we sum all lines above 30 without diplaying the line numbers:
WITH
MEMBER [Measures].[lines above 30] AS
IIF(
[Measures].[Internet Sales Amount] > 30,
[Measures].[Internet Sales Amount],
null
MEMBER [Measures].[aggr lines above 30] AS
SUM(
exists(
[Internet Sales Order Details].[Sales Order Line].[Sales Order Line],
[Internet Sales Order Details].[Sales Order Number].currentmember
[Measures].[lines above 30]
SELECT
[Measures].[Internet Sales Amount],
[Measures].[aggr lines above 30]
} ON 0,
[Internet Sales Order Details].[Sales Order Number].[Sales Order Number] ON 1
FROM ( SELECT
[Product].[Category].[All Products] ON 0,
[Internet Sales Order Details].[Sales Order Number].&[SO51177]:
[Internet Sales Order Details].[Sales Order Number].&[SO51178]
} ON 1
FROM [Adventure Works] )
I reduced the cube with a subselect.
Philip,

How to use filter operator with ROWNUM

I would like to add filter operator in my mapping with ROWNUM to reduce the ETL loading time during testing to ensure mapping is working, but I don't know how, please help provide me some guideline. Thank you.

what is your owb version?
Starting with Oracle Warehouse Builder 10.2.0.3, you can use the pseudocolumns ROWID and ROWNUM in mappings. The ROWNUM pseudocolumn returns a number indicating the order in which a row was selected from a table. The ROWID pseudocolumn returns the rowid (binary address) of a row in a database table.
You can use the ROWID and ROWNUM pseudocolumns in Table, View, and Materialized View operators in a mapping. These operators contain an additional column called COLUMN USAGE that is used to identify attributes used as ROWID or ROWNUM. For normal attributes, this column defaults to TABLE USAGE. To use an attribute for ROWID or ROWNUM values, set the COLUMN USAGE to ROWID or ROWNUM respectively.
You can map a ROWID column to any attribute of data type ROWID, UROWID, or VARCHAR2. You can map ROWNUM column to an attribute of data type NUMBER or to any other data type that allows implicit conversion from NUMBER.
Note that ROWID and ROWNUM pseudocolumns are not displayed in the Data Object Editor since they are not real columns.
Edited by: Darthvader-647181 on Oct 29, 2008 9:18 AM

How to use filter for alv display in webdynpro

hi,
i have use select-options and what ever data is coming from the data base i display it using alv.
i also want to include functionality like filter and all that , that comes in normal alv.please guide me how can i do it.
thanks

hi please remind that this is not the proper forum for this ...go to this
Expert Forums » ABAP Development » UI Programming

How to use Filter commands in WAD?

Similar Messages

Maybe you are looking for