How to use filter to color cell content

Numbers 3.5.2: I would like the content of a cell to change color, if the value of the number within the cell drops down below a certain value. For instance: as long as the values in the cell stay above 50 -> the number should be displayed black, if below 50 -> number should appear in red.
This was possible in Numbers 09 using a simple filter as shown here:
Did this filter disappear in actual Numbers? Is there any alternative?
Thanks
Ulrich

What you are looking for isn't a "filter", its conditional text or conditional highlighting: http://help.apple.com/numbers/mac/3.5/#/tan93f5de5c3

Similar Messages

Is it possible to use wildcards to match cell contents in an if statement?

I need to return a ID along with some other information on a page by page basis, so that the information comes out linked by position. I use a couple of loops and if statements to navigate through the document. I am able to use exact matches of cell contents which is fine when the contents doesn't vary. But the IDs, though they have a similar pattern, are all different. In a menu driven search, I am able to find what I need with '150^9^9^9^9^9-^9^9^9' But when I try putting this (or any number of [0-9], *, ? combinations) it fails. Is it possible to use wildcards? The symbol used for the match (==) makes me suspect that it is not possible and that only literal, exact matches will work. But I wanted to check with the experts before giving up.
Thanks
pcbaz

Thanks for the input. You're right, a GREP search is much more efficient. But what I'm trying to do and the circumstances here don't allow me, I think, to go that route. I am trying to generate a list of values coming from several textframes on a single page and have them come out so that I can tell which values belong together.
I'm using an inherited document with masters that were created 'manually'; the index numbering for textframes and tables is random. I navigate through the pages, looping through textframe indices asking ' does this textframe exist?' If so, I ask if it is a table -- if no, it is a simple textframe and I ask about the ID, if yes, I ask if the contents of cell (0,0) (invariant position and contents) are equal to the table I want.. I am sending the ID and other pieces of information from the table to one row of a new table on a new page. So the ID and other information from a single page are linked by being in the same row.
I know this a little 'off-normal' -- I'm using the search to navigate through the document and find things by location the way you do with a spreadsheet. I have devised a work-around that helps me get around the fact that the ID is not invariant. I create a list of the (exact) IDs from another document, equating them to a variable ('a'). I then loop through the list of IDs and ask if the contents of the textframe is equal to 'a'..This works o.k, unless there happens to be an extra space, a different kind of hyphen, etc. It would be so much easier if I could use the wildcards that work in a menu-driven text or GREP search in script just to ask about the contents of the textframe.
Thanks again
pcbaz (Peter BIerly)
P.S. we have since rewritten the masters so this problem will not exist in the future -- we now know exactly which textframe and/or table indices to refer to to get any particular bits of information and don't need to ask questions about the contents.

How to use downloaded Adobe color theme (.ase) in Photoshop cc?

How to use downloaded Adobe color theme (.ase) in Photoshop cc?

I can confirm this functions but there is no indication it's been successful and the swatches appear in the Swatches panel, *not* in the Libraries panel where I would expect them. My issue is that IMO this should not even be an issue, because a palette created on color.adobe.com should just show up in PS CC unless I'm not understanding the intended behavior.
Anyone?

How to use Filter in ActionServlet

hi how do i use filter in my ActionServlet ?
here is a code :
package test;
import java.io.*;
import java.util.*;
import javax.servlet.*;
public class TimeFilter implements Filter {
public void init(FilterConfig config) throws ServletException {
public void doFilter(ServletRequest request, ServletResponse response,
    FilterChain chain) throws IOException, ServletException {
    int hour = Calendar.getInstance().get(Calendar.HOUR_OF_DAY);
    // only service the request between 08:00 and 17:59
    if (hour >= 8 && hour <= 17) {
      chain.doFilter(request, response);
    // for other times, forward the request to someplaceelse
    } else {
      request.getRequestDispatcher("/someplaceelse").forward(request, response);
public void destroy() {
}where do i place it in my ActionServlet to get filtered access ?
My ActionServlet :
import javax.servlet.http.*;
import org.apache.struts.action.*;
import java.io.*;
import java.util.*;
public final class SubmitAction extends Action {
public ActionForward perform(ActionMapping mapping,
      ActionForm form,
      HttpServletRequest request,
      HttpServletResponse response) {
      DynaActionForm SubmitForm = (DynaActionForm) form;
     // blah
    // blah
return (mapping.findForward("success"));
}can ActionServlet use filter ?
How do i use the Filter class in ActionServlet if i want to get filtered Aceess of the website ?

Ok, this is how filters work.
Typically the filter maps to '/*' and your action servlet maps to '/*.do'. So if you request 'login.do', then the filter would first be called. If it's not between 08:00 and 16:59, the request will be passed on to the action servlet, else it would be forwarded to the action servlet.
There's no need to 'integrate' the filter into you action servlet.

How to use filter for data tables? Important topic but no docs/examples.

I was looking at the TableRowGroup APIs:
http://developers.sun.com/prodtech/javatools/jscreator/reference/docs/apis/webui/index.html
and looks like it has getTableDataFilter and setTableDataFilter methods. Sounds to me, that we can use TableDataFilter to filter rows that are displayed. For example, we can provide users with a drop down list of fields to choose from, and input field to enter the value of the selected field, so that they can narrow down the rows to search for specifics row(s) they are looking for.
I have not seen any example, or enough documentation, to figure out how to use this filter. Since JSC is new, there are not too many resources out there or on web for such specific issues. Any gurus out there?
Thanks

Creator Team: Data filtering tutorial is over due now. This is something that will be useful to most developers. We all want to display users some data and want to provide user ability to filter it down based on some criteria, i.e. display rows within a date range, display all rows that have certain value or a field, etc. If there is a built-in filter in TableRowGroup, why not document it adequately along with some examples and a tutorial?
This is one of the key elements of Microsoft/VS.NET market share -- provide tons of example/tutorials/advanced code/books/3rd party books, etc. Why can't other companies follow a well-proven success element? In spite of making a better product, the can end up loosing or not gaining enough share, because of this lack of attention.

How to use FILTER -- USING in rpd???

Can we use FILTER USING in rpd ?

Yes in the 'use existing logical columns as the source' window of a measure.
Its under Functions - Display Functions in the expression builder.

How it use Filter Id and FilterPanelFocusid in JSF Table component

How it use FilterId and FilterPanelFocusid in JSF Table component

How it use FilterId and FilterPanelFocusid in JSF Table component

How to use Filter/Responsewrapper to trap http response

My application deals with various request/responses. How do i write a Responsewrapper or responseoutputstream to trap the contents of the response in a file without fiddling with the actual servletoutputstream, which is thrown back to the browser as usual.

Thanks for the answers,
I am using something like this in my filter code
ByteArrayOutputStream baos = new ByteArrayOutputStream();
CacheResponseWrapper wrappedResponse = new CacheResponseWrapper(hres, baos);
chain.doFilter(hreq, wrappedResponse);
FileOutputStream fos = new FileOutputStream(file);
fos.write(baos.toByteArray());
fos.flush();
fos.close();
FileInputStream fis = new FileInputStream(ile);
String mt = sc.getMimeType(hreq.getRequestURI());
response.setContentType(mt);
ServletOutputStream sos = hres.getOutputStream();
for (int i = fis.read(); i!= -1; i = fis.read()) {
sos.write((byte)i);
The CacheResponseWrapper uses a CacheResponseStream which write the necessary bytes to the provided ByteArrayOutputStream instead of the general ServletOutputStream

Cant use filter after merging cells

I use numbers for making a sheet in which i have merged to cells and have kept a day ( Monday,Tuesday etc), and 2 employees with 2 different amounts of the daily income of the work done, earlier it was only one employee, so i could filter, how much he makes every Friday in month.
Now after merging the cells as there is 2 employees , i cannot use the filter to check how much they made on a particular day in month.
The error message i get is " FILTER IS DISABLED BECAUSE THE TABLE CONTAINS MERGED CELLS "
PLEASE HELP !!
Example :
Thursday
10
Shoaib
50
Naeem
55
Friday
11
Shoaib
100
Naeem
100
Saturday
12
Shoaib
230
Naeem
245

Hi Ian,
i cant do 2 things, i did them once but forgot since i use it once a month to analyse, but i just do data entry thrice a week. i tried the below points but no hope.
1. How to filter, the Day and the name together ?
2. After getting the results of the filter, then to sum the result. There is no empty cell available after the filter result, hence cant get the sum result.
Friday
4
Shoaib
235
Friday
11
Shoaib
100
Friday
11
Naeem
100
Friday
18
Shoaib
180
Friday
18
Naeem
200
Friday
25
Shoaib
160
Friday
25
Naeem
110

How to use IMAQ extract color panel in a LabView file?

I want to change a color image into a greyscale image. Therefore I want to use the function IMAQ extract color panels but I don't know how to insert it in my LabView application.
Please, can anyone give me some advice ?!!!
Thx, Birgit

Birgit,
If you want all of the color planes, you can use IMAQ ExtractColorPlanes. Allocate an 8-bit image for each of the color planes. Wire the original color image and each of the 8-bit images for the color planes on the left and bottom of the vi. The outputs on the right side will be the same images, and they will each contain the desired color plane. The input at the top of the vi controls which color planes are extracted (RGB, HSI, etc.) Grayscale will probably be the I plane in HSI.
If you just want a grayscale image, use IMAQ ExtractSingleColorPlane instead. Wire the color image to Image Src, and wire an 8-bit image to Image Dest. Select the color plane using the top input, and it will come out on the right side.
Bruce
Bruce Ammons
Ammons Engineering

How to use a checkbox table cell in FXML

I've figured out how to make a column in a TableView render as a checkbox rather then just text when the UI is written in Java. Now I'm trying to figure out how to do the same thing with FXML. I've tried a couple experiments which have all failed, usually with an exception complaining that it can't coerce a table cell class type (or extension) to an interface (i.e. Callback).
Right now I'm just trying to make one of the columns be a checkbox. I'm not trying to use any custom type. In other words, in Java I would have done the following:
TableColumn<MyModel, Boolean> col1 = new TableColumn<MyModel, Boolean>();
col1.setCellValueFactory(new PropertyValueFactory<MyModel, Boolean>("col1Field"));
col1.setCellFactory(CheckBoxTableCell.forTableColumn(col1));This works when I build the UI using Java API calls. Does anyone know how to do this in FXML?

Thank you both.
I used Luca's suggestion as a first step.
You'll find attached my v.i. that enables me to do what I wanted. It finally works as I expected. It would have been much simpler if my DAQ was able to measure directly a resistance!
Loris
Attachments:
banc_de_test_température.vi ‏205 KB

How to use a grayscale color model in converting a colored image

how to convert a colored image into grayscale using :
ColorSpace cs = ColorSpace.getInstance(ColorSpace.CS_GRAY);
int bits[] = new int[] {8};
ColorModel cm = new ComponentColorModel(cs, bits, false, false,
Transparency.OPAQUE,
DataBuffer.TYPE_BYTE);
please only this method , i don't need the "bandcombine" method cause i need to know that i have exact 256 grayscale colors, thanx in advance.

I went into mail preferences in the first place. I found the fonts and colors and picked the color I want but it doesn;t seem to be sticking?

[J2ME MIDP 2.0] Alert, how to use fonts and colors?

good morning,
does anyone know in which way I can use colors in an alert pop-up?
I've done my on using the code below. I would like to have text and images centered in the screen display and I would also like to use the colors I'm using in the application I'm writing.
thx in advice,
Omar
private void alertDisplay(String s){
    Alert a = new Alert("Location set to " + s.toUpperCase());
    if(s.startsWith("H"))
      a.setImage(hOn);
    else
      a.setImage(oOn);
    a.setString("Actual Location: " + s.toUpperCase());
    a.setTimeout(2000);
    a.setType(AlertType.INFO);
    Display.getDisplay(this).setCurrent(a);
    Display.getDisplay(this).vibrate(1000);
    Display.getDisplay(this).flashBacklight(1000);
}

Hi,
The way how an Alert looks like cannot be influenced. When setting an image, you cannot indicate where that image should be placed. When setting a certain message text, you cannot influence its colour, its font and its allignment...
The colour and font properties are theme / skin dependent on your mobile. When switching your mobile to another theme, then you will notice that your Alerts (and Forms and Lists, etc etc...) are coloured (titlebar, command softkeys, textfields) according to that theme.
Cheers,
Jasper

MDX : How to use filter on a dimension without showing it OR merge 2 attributes of the same dimension?

Hello everyone,
I'm kind of newbie with MDX language, I'm trying to get filtered measures from a cube with a specific layout.
Here is my exemple :
I want to get all the "order numbers" where the "invoice" cost is more than 300. Each invoice is linked with an ID, one order number can have several invoices.
So what I do is a select request with 2 dimensions : "order num" and "id_invoice"
Here is the result : I get all the cost sorted by "order num" and I can easealy identify those who are above 300
order num
Id_invoice
cost
Total
Total2
15450307
10032013094498
1671
1737
ok
15450307
10032013099835
66
1737
KO
15450596
10032013094078
8524
8524
ok
15451214
10032013094119
228
4348
KO
15451214
10032013097069
978
4348
ok
15451214
10032013097071
3142
4348
ok
15542434
10032013101736
142
142
KO
15550064
10032013097016
1261
1261
ok
15550346
10032013097586
2252
2252
ok
15550353
10032013098446
2617
2617
ok
What i need : In "cost", I need to have the sum of each cost which are above 300 in one line (without showing the invoice id)
order num
cost
Total
Total2
15450307
1671
1737
ok
15450596
8524
8524
ok
15451214
4120
4348
ok
15550064
1261
1261
ok
15550346
2252
2252
ok
15550353
2617
2617
ok
How is it possible to use a filter on a dimension without showing it or merge 2 attributes of the same dimension ?
The problem is that if I show "id" column, the filter doesn't work properly : it compares 300 with the total cost of the whole order and does not compare with each invoice (which could be under 300 ! - see "KO" in Total2 column)
Here is the request I use to generate this result :
with
member [Measures].[Total]
as (
[TP].[ID INVOICE].[All],
[TP].[ORDER NUM].currentmember,
[Measures].[COST]
member [Measures].[Total2]
as (
IIF([Measures].[COST] >
300, "ok",
"KO")
select
{[Measures].[COST],[Measures].[Total],[Measures].[Total2]}
on
columns,
Filter
             [TP].[ORDER NUM].[ORDER
NUM].members *
             [TP].[ID INVOICE].[ID
INVOICE].members
             ,[Measures].[COST]
> 0
on
rows
FROM [MYCUBE]
Thank you for your help !
Kind regards,
Olivier.

Hi Olivier,
hereunder a similar query against the AW. For all order numbers, we sum all lines above 30 without diplaying the line numbers:
WITH
MEMBER [Measures].[lines above 30] AS
IIF(
[Measures].[Internet Sales Amount] > 30,
[Measures].[Internet Sales Amount],
null
MEMBER [Measures].[aggr lines above 30] AS
SUM(
exists(
[Internet Sales Order Details].[Sales Order Line].[Sales Order Line],
[Internet Sales Order Details].[Sales Order Number].currentmember
[Measures].[lines above 30]
SELECT
[Measures].[Internet Sales Amount],
[Measures].[aggr lines above 30]
} ON 0,
[Internet Sales Order Details].[Sales Order Number].[Sales Order Number] ON 1
FROM ( SELECT
[Product].[Category].[All Products] ON 0,
[Internet Sales Order Details].[Sales Order Number].&[SO51177]:
[Internet Sales Order Details].[Sales Order Number].&[SO51178]
} ON 1
FROM [Adventure Works] )
I reduced the cube with a subselect.
Philip,

How to use filter operator with ROWNUM

I would like to add filter operator in my mapping with ROWNUM to reduce the ETL loading time during testing to ensure mapping is working, but I don't know how, please help provide me some guideline. Thank you.

what is your owb version?
Starting with Oracle Warehouse Builder 10.2.0.3, you can use the pseudocolumns ROWID and ROWNUM in mappings. The ROWNUM pseudocolumn returns a number indicating the order in which a row was selected from a table. The ROWID pseudocolumn returns the rowid (binary address) of a row in a database table.
You can use the ROWID and ROWNUM pseudocolumns in Table, View, and Materialized View operators in a mapping. These operators contain an additional column called COLUMN USAGE that is used to identify attributes used as ROWID or ROWNUM. For normal attributes, this column defaults to TABLE USAGE. To use an attribute for ROWID or ROWNUM values, set the COLUMN USAGE to ROWID or ROWNUM respectively.
You can map a ROWID column to any attribute of data type ROWID, UROWID, or VARCHAR2. You can map ROWNUM column to an attribute of data type NUMBER or to any other data type that allows implicit conversion from NUMBER.
Note that ROWID and ROWNUM pseudocolumns are not displayed in the Data Object Editor since they are not real columns.
Edited by: Darthvader-647181 on Oct 29, 2008 9:18 AM

How to use filter to color cell content

Similar Messages

Maybe you are looking for