Digital Certificate Issue

Hi guys,
How can we access the details of dc which installed in our system or in ie browser.
I m using windows 2000.
Please guide me.
Thanks
rakesh.

You should use the Sun-MSCAPI bridge in JDK6. Windows has its own keystore and certificate-store and provides an API in its CAPI library. Sun has provided a Java bridge to that library that uses standard JCE classes and methods to access the keys and certificates. You will find details in the JDK6 JCA documentation.

Similar Messages

  • Fraudulent digital certificates issued for high-value websites, iOS patch ?

    http://www.zdnet.com/blog/security/microsoft-warns-fraudulent-digital-certificat es-issued-for-high-value-websites/8488?tag=nl.e589
    http://www.h-online.com/security/news/item/SSL-meltdown-forces-browser-developer s-to-update-1213358.html
    this obviously means that iOS could be vulnerable. Mozilla has patched Firefox (all versions), MS just pushed an update, Google patched Chrome already a few days ago, how about Safari and iOS?
    edit: does iOS use OSCP validation?

    I see Safari desktop supports OCSP checking - if manually activated - but does Safari mobile too? as there's hardly any setting available for Safari on idevices it's hard to know...

  • Purchasing a digital certificate for SCOM usage

    I am having problems with certificiates for SCOM (based on our infrastructure I believe not SCOM) and have asked some questions on it below -
    Digital certificate issues
    However I would like to break out one question and that is if I dont want to (read cant) use an internal CA at the moment where can I purchase two certificates for SCOM MS and gateway? When I look on the obvious sites such as Entrust and Thawte for instance
    it seems easy to order a web SSL certificate for instance but how would I go about ordering the type I need and what sort of information would I need to provide?
    Many thanks

    Hi,
    This can be a public CA such as VeriSign. Please check if the following post is helpful.
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/7e8dde55-6e55-4109-8da5-85a93fa64ea0/using-a-thirdparty-for-ssl-cert-for-scom-gateway?forum=operationsmanagerdeployment
    Niki Han
    TechNet Community Support

  • Issues with digital certificates - HELP!

    I have no rational explanation, but this past week I was playing with the settings on my computer and deleted all the digital certificates in my computer.
    Since then, everytime I want to check my Yahoo! or Gmail, or any type of secure account, there is a pop-up indicating something about not having a secure certificate. I've tried to add the X509 but it just doesn't store it and the next time I reboot the same thing happens all over again.
    Can someone please help? Thank you!!

    I assume you are talking about the icon on an iPad.
    Not all apps have Airplay functionality, more will with time.
    If it's the same app sometimes showing icon, sometimes not I would suspect transient network issues losing the connection between the devices. Some of Apple's device seem a bit slow to re-establish connections if they're lost or stubbonly refuse to reconnect - occasionally this can be down to a user's network or the device at either end losing connection even if the iPad remains connected.
    There may of course be some software bugs at play.

  • Checklist for Exchange Certificate issues

    Checklist for Exchange Certificate issues
    1. 
    Why certificate is important for Exchange and What are Certificates used for
    Exchange is now using certificates for more than just web, POP3, or IMAP. In addition to
    securing web services, it has also incorporated Transport Layer Security (TLS) for session based authentication and encryption.
    Certificates are used for several things on Exchange Server. Most customers also use certificates
    on more than one Exchange server. In general, the fewer certificates you have, the easier certificate management becomes.
    IIS (OWA, ECP, EWS, EAS, OA, Autodiscover, OAB, UM)
    POP/IMAP
    SMTP
     2. 
    Common symptoms for
    certificate issue
    Here we can see three different types of the certificate warning, mainly from the Outlook
    side.
    a.
    Certificate mismatch issue
    b.
    Certificate trust issue
    c.
    Certificate expiration issue
    3. 
    Checklists
    In this section, checklists will be provided according to the three different scenarios:
    Certificate Mismatch Issue
    [Analysis]:
    This issue mainly occurs because the URL of the web services Outlook tries
    to connect does not match the host name in the certificate.
    [Checklist]:
    Firstly make sure how many host name in your certificate the certificate. Run “Get-ExchangeCertificate | select certificatedomain”.
    Secondly, check the web services URLs which Outlook are trying to connect to. Run “Test Email AutoConfiguration”
    In this scenario, you need to check the host name for the following services:
    Autodiscover
    EWS
    OAB
    ECP
    UM
    If any of the urls above does not match the one in the certificate, refer to the following article to change
    it via EMS:
    http://support.microsoft.com/kb/940726
     1.
    Do not forget to restart the IIS service after applying the changes above.
     2. Make sure a valid certificate is enabled on the IIS service.
    Certificate Trust Issue
    [Analysis]:
    For the self-signed and PKI-based (Enterprise)
    certificates, they are not automatically trusted by the client computer or mobile device, you must make sure that you import the certificate into the trusted root certificate store on client computers and devices. On the other hand, Third-party or commercial
    certificates do not have this problem. Most commercial CA certificates are already trusted because the certificate already resides in the trusted root certificate store. Because the issuer is trusted, the certificate is also trusted. Using third-party certificates
    greatly simplifies deployment.
    [Checklist]:
    If it’s an Enterprise CA certificate, manually install the root certificate to the “Trusted Root Certification Authorities” folder:
    If it is a 3<sup>rd</sup>-party certificate, first remove and reinstall the certificate. Check whether the Windows Certificate Store on the local
    client is corrupted. If it still does not work, please contact the third-party CA support to verify the certificate.
    Certificate Expiration Issue
    [Checklist]:
    When a certificate is about to expired, we just need to renew it by referring the following article:
    Renew an Exchange Certificate
    http://technet.microsoft.com/en-us/library/ee332322(v=exchg.141).aspx
    To avoid any conflictions, it’s recommended to remove the expired certificate from the certificate store.
    [How to set a reminder to alert the administrator when a certificate is about to expired]:
    It’s easy to fix the certificate expire issue. But it should be more important to set a reminder before the
    certificate expiration. Or there can be a large user impacts.
    Generally, the Event ID “^(24|25)$” will appear in Application log when a certificate is about to expire.
    If it’s not quite visible, we can refer to the following solution:
    http://blogs.technet.com/b/nexthop/archive/2011/11/18/certificate-expiration-alerting.aspx
    OWA certificate revoked issue
    [Analysis]:
    IE
    includes support for server certificate revocation which verifies that an issuing
    CA has not revoked a server certificate. This feature checks for CryptoAPI revocation when certificate extensions
    are present. If the URL for the revocation information is unresponsive, IE cancels the connection.
    [Solution or workaround]:
    1. Contact CA provider and check whether the questioned certificate is in the Revoked List.
    2. If not, check whether the certificate has a private key.
    3. Remove the old certificate and import the new one.
    Workaround:
    IE Internet Options -> Advanced tab -> Clear the "Check for server certificate revocation"
    checkbox.
    4. 
    More References
    Digital Certificates and SSL
    http://technet.microsoft.com/en-us/library/dd351044(v=exchg.150).aspx
    More on Exchange 2007 and certificates - with real world scenario
    http://blogs.technet.com/b/exchange/archive/2007/07/02/3403301.aspx

    (Reported previous post with link to SIS package to moderator)
    This is not the correct SIS package for the N73. The package shown is for S60 3.2 devices, but the N73 is not S60 3.2, I believe it is S60 3.0.
    Most features may work with this SIS, but if you experience strange problems, try using the S60 3.0 version.
    But there are no significant difference between 2.5.3 and 2.5.5 with regard to attachments. The only changes were with localization (languages).
    At this point, try 2.7.0 which is out now:
    http://businesssoftware.nokia.com/mail_for_exchange_downloads.php
    Make sure to pick the right phone on the drop down list. It does matter! There are 4 different packages. This list makes sure you get the right one.
    I have seen some issues with attachments not completing that seem to be carrier dependent. You can test this my using Wifi (if possible).
    Message Edited by m4e_team_k on 28-Sep-2008 12:25 AM

  • Using a digital certificate to send an encrypted email.

    I want to send an e-mail through my i-pad using a digital certificate, that i have already configurated in my e-mail account. This e-mail i want to send also encrypted. Do i need to have a public certificate code from the person i´m sending the e-mail to? Like outlook express works?
    thanks for the answer in advance

    Hello,
    Your best option will be to use an encoder for feedback in your system. If you use an encoder then at the end of the move, the controller will compare your trajectory position with the position the encoder reads (the actual position) and make the necessary adjustments. Also, this is all handled transparently so you won't have to worry about any complicated programming issues.
    Regards,
    Andy Bell
    Applications Engineer
    National Instruments

  • Mail not recognizing digital certificate

    Hi all,
    I had a digital certificate generated by .Mac which worked fine in mail.
    Today I noticed that mail stopped giving me the option to digitally singed my mails.
    Did someone notice this behavior? Is there a fix?
    Thanks,
    Ziv

    Anna,
    I am having the same issue. I am on a new laptop without my cert, so I downloaded it again from thawte but it only installs the public key, not the private key.

  • Mail not recognizing Versign digital certificate, no icon

    This is very frustrating. Digital certificate is in my Keychain and yet it does not automatically appears in Mail as it suppose to be. Choising costomize option beside email account opens but their is no icon to selection to sign or encrypting mail (the checkmark).
    HELP! HELP! HELP!
    Powerbooks G4/1.04 & G3 Lombard-400 & 3400   Mac OS X (10.4.7)  

    Anna,
    I am having the same issue. I am on a new laptop without my cert, so I downloaded it again from thawte but it only installs the public key, not the private key.

  • Digital Certificate of SAP AG from VeriSign expired on 26.02.2005 ?

    Hi,
    When we open BEx, Security Warning screen of office 2003 appears. Although SAP note says that "click 'Always trust macros from this publisher'", this check is grayed out.It is because Validity of Digital Certificate is 26.02.2005.
    Question is ;
    is there a newer version of *.xla with new Digital certificate? or any other comment which we don't encounter this screen everytime we start BEx without lowering the security settings?
    Thanks &B Regards

    Sinan,
      We are experiencing the same exact problem. How did you fix this issue??
    Regards,
    Vinay

  • CIDX Adopter Digital Certificates

    Guys,
    Here is the scenario..
    We are getting the HTTPS message from external system to XI.
    We are using CIDX Adopter to read external message and validate the digital certificates and map to ORDERS05 Idoc. As soon I trigger the message from external system (HTTPS message), I am seeing message in XI RWB adopter engine, when CIDX adopter is trying the validate the digital signatures somehow it is pointing to J2EE_GUSET user. And it is giving error as below mention.
    <b>ERROR</b>
    "Signature verification failed, alerted;Error when accessing keystore:service_ssl
    Signature verification failed, alerted
    Unexpected error while packing the CIDX message -
    null
    Message Processing caused Failure. -
    BTD handler indicated processing error
    Error encountered while receiving inbound action; See nested exception for detailed error message -
    Message Processing caused Failure. -
    Message Processing caused Failure. -
    BTD handler indicated processing error
    Delivery of the message to the application using connection CIDXAdapter failed, due to: Error encountered while receiving inbound action; See nested exception for detailed error message. "
    <b>Regarding Digital Certificates</b>
          We got the digital certificates from my external party and installed and
           created the Key stores in XI Visual Administration tool.
           We configured in sender agreement by selecting those key stores..
    Can any one help me on how to resolve the issue, is there any problem in Visual Admin Toll, while installing the certificates..
    Thanks
    Murali
    Message was edited by:
            Murali Babu Pallabothula

    HI,
    See the below links
    HTTP* Errors /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/55ba9790-0201-0010-aa98-ce8f51ea93cd
    also see the below links may be useful..
    See the below links
    /people/sap.user72/blog/2005/06/16/using-digital-signatures-in-xi
    SAP Java Cryptographic Toolkit
    http://help.sap.com/saphelp_nw04/helpdata/en/8d/cb71b8046e6e469bf3dd283104e65b/content.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/55ba9790-0201-0010-aa98-ce8f51ea93cd
    http://help.sap.com/saphelp_nw04/helpdata/en/fb/322f41d606ef23e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/45/341a2176b74002e10000000a155369/frameset.htm
    Also see the below threads.
    how to deal with digital signatures when converting messages?
    Certificates Vs Digital Signatures
    Security Issues: SSL on SOAP Adapter and Digital Signature in BPM
    message level security: difference digital signature and certificate
    Loading Invoice XML IDoc with digital signature via XI into R/3
    Regards
    CHilla

  • Applet digital certificate is diplaying before applet loads

    Hi All,
    I have a drop-down in a jsp page. I want to display a signed applet when I select a particular option from that drop-down list.
    In http mode the digital certificate is displaying only when I select that particular option from dropdown list. (working fine)
    Problem:
    But in https mode the digital certificate is diplaying whenever that jsp loads.(i.e. certificate is diplaying before selecting an value from dropdown list)
    Suggestions please.
    Thanks,
    Krishna

    I am having a similar issue.  Clients using a system running an old version of Crystal Reports are encountering a warning that the digital signature has expired.  It appears to only affect clients using Java 1.5.0 and newer.
    Is there a way to update the digital signature?

  • VPN error when using Microsoft digital certificates.

    Hi,
    I tried implementing site-site VPN between Cisco Router and Cisco ASA using Microsoft digital certificates. After performing the following configurations, I was not able to ping to other site LAN. I enabled debug and got following out put. I sucessfully enrolled digital certificates.
    Cisco ASA config:
    access-list 100 extended permit ip 10.1.1.0 255.255.255.0 192.168.1.0 255.255.255.0
    nat (inside) 0 access-list 100
    static (inside,outside) 1.1.1.10 10.1.1.10 netmask 255.255.255.255
    route outside 0.0.0.0 0.0.0.0 1.1.1.2 1
    crypto ipsec transform-set myset esp-3des esp-sha-hmac
    crypto map mymap 1 match address 100
    crypto map mymap 1 set peer 2.2.2.2
    crypto map mymap 1 set transform-set myset
    crypto map mymap interface outside
    crypto ca trustpoint winca
    enrollment url http://10.1.1.10:80/certsrv/mscep/mscep.dll
    crl configure
    crypto isakmp enable outside
    crypto isakmp policy 10
    authentication rsa-sig
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    tunnel-group 2.2.2.2 type ipsec-l2l
    tunnel-group 2.2.2.2 ipsec-attributes
    trust-point winca
    On router:
    crypto ca trustpoint winca
    enrollment mode ra
    enrollment url http://1.1.1.10:80/certsrv/mscep/mscep.dll
    crypto isakmp policy 19
    encr 3des
    group 2
    authentication rsa-sig
    crypto isakmp key cisco address 1.1.1.1
    crypto map mymap 10 ipsec-isakmp
    set peer 1.1.1.1
    set transform-set myset
    match address 100
    access-list 100 permit ip 192.168.1.0 0.0.0.255 10.1.1.0 0.0.0.255
    crypto ipsec transform-set myset esp-3des esp-sha-hmac
    Debug output on ASA
    CorpASA# Nov 15 02:12:49 [IKEv1]: Group = 2.2.2.2, IP = 2.2.2.2, Removing peer from peer table failed, no match!
    Nov 15 02:12:49 [IKEv1]: Group = 2.2.2.2, IP = 2.2.2.2, Error: Unable to remove PeerTblEntry
    CorpASA#
    CorpASA#
    CorpASA# Nov 15 02:13:06 [IKEv1]: Removing peer from peer table failed, no match!
    Nov 15 02:13:06 [IKEv1]: Error: Unable to remove PeerTblEntry
    Nov 15 02:13:11 [IKEv1]: Removing peer from peer table failed, no match!
    Nov 15 02:13:11 [IKEv1]: Error: Unable to remove PeerTblEntry
    Debug out put on router:
    R2#ping 10.1.1.10 source 192.168.1.1
    Type escape sequence to abort.
    Sending 5, 100-byte ICMP Echos to 10.1.1.10, timeout is 2 seconds:
    Packet sent with a source address of 192.168.1.1
    Nov 15 02:21:01.067: %SYS-5-CONFIG_I: Configured from console by console
    Nov 15 02:21:02.651: ISAKMP: received ke message (1/1)
    Nov 15 02:21:02.655: ISAKMP (0:0): SA request profile is (NULL)
    Nov 15 02:21:02.655: ISAKMP: local port 500, remote port 500
    Nov 15 02:21:02.655: ISAKMP: set new node 0 to QM_IDLE
    Nov 15 02:21:02.655: ISAKMP: insert sa successfully sa = 64597C20
    Nov 15 02:21:02.655: ISAKMP (0:1): Can not start Aggressive mode, trying Main mode.
    Nov 15 02:21:02.659: ISAKMP: Looking for a matching key for 1.1.1.1 in default : success
    Nov 15 02:21:02.659: ISAKMP (0:1): found peer pre-shared key matching 1.1.1.1
    Nov 15 02:21:02.659: ISAKMP (0:1): constructed NAT-T vendor-07 ID
    Nov 15 02:21:02.659: ISAKMP (0:1): constructed NAT-T vendor-03 ID
    Nov 15 02:21:02.659: ISAKMP (0:1): constructed NAT-T vendor-02 ID
    Nov 15 02:21:02.659: ISAKMP (0:1): Input = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM
    Nov 15 02:21:02.663: ISAKMP (0:1): Old State = IKE_READY  New State = IKE_I_MM1
    Nov 15 02:21:02.663: ISAKMP (0:1): beginning Main Mode exchange
    Nov 15 02:21:02.663: ISAKMP (0:1): sending packet to 1.1.1.1 my_port 500 peer_port 500 (I) MM_NO_STATE
    Nov 15 02:21:02.703: ISAKMP (0:1): received packet from 1.1.1.1 dport 500 sport 500 Global (I) MM_NO_STATE
    Nov 15 02:21:02.707: ISAKMP (0:1): Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
    Nov 15 02:21:02.707: ISAKMP (0:1): Old State = IKE_I_MM1  New State = IKE_I_MM2
    Nov 15 02:21:02.707: ISAKMP (0:1): processing SA payload. message ID = 0
    Nov 15 02:21:02.707: ISAKMP (0:1): processing vendor id payload
    Nov 15 02:21:02.707: ISAKMP (0:1): vendor ID seems Unity/DPD but major 194 mismatch
    Nov 15 02:21:02.711: ISAKMP : Scanning profiles for xauth ...
    Nov 15 02:21:02.711: ISAKMP (0:1): Checking ISAKMP transform 1 against priority 19 policy
    Nov 15 02:21:02.711: ISAKMP:      encryption 3DES-CBC
    Nov 15 02:21:02.711: ISAKMP:      hash SHA
    Nov 15 02:21:02.711: ISAKMP:      default group 2
    Nov 15 02:21:02.711: ISAKMP.:      auth RSA sig
    Nov 15 02:21:02.711: ISAKMP:      life type in seconds
    Nov 15 02:21:02.711: ISAKMP:      life duration (VPI) of  0x0 0x1 0x51 0x80
    Nov 15 02:21:02.715: ISAKMP (0:1): atts are acceptable. Next payload is 0
    Nov 15 02:21:02.771: ISAKMP (0:1): processing vendor id payload
    Nov 15 02:21:02.771: ISAKMP (0:1): vendor ID seems Unity/DPD but major 194 mismatch
    Nov 15 02:21:02.775: ISAKMP (0:1): Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
    Nov 15 02:21:02.775: ISAKMP (0:1): Old State = IKE_I_MM2  New State = IKE_I_MM2
    Nov 15 02:21:02.783: ISAKMP (0:1): constructing CERT_REQ for issuer cn=md902j-n5dros99,dc=md902j,dc=ca,dc=com
    Nov 15 02:21:02.783: ISAKMP (0:1): sending packet to 1.1.1.1 my_port 500 peer_port 500 (I) MM_SA_SETUP
    Nov 15 02:21:02.783: ISAKMP (0:1): Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
    Nov 15 02:21:02.787: ISAKMP (0:1): Old State = IKE_I_MM2  New State = IKE_I_MM3
    Nov 15 02:21:02.903: ISAKMP (0:1): received packet from 1.1.1.1 dport 500 sport 500 Global (I) MM_SA_SETUP
    Nov 15 02:21:02.907: ISAKMP (0:1): Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
    Nov 15 02:21:02.907: ISAKMP (0:1): Old State = IKE_I_MM3  New State = IKE_I_MM4
    Nov 15 02:21:02.907: ISAKMP (0:1): processing KE payload. message ID = 0
    Nov 15 02:21:02.979: ISAKMP (0:1): processing NONCE payload. message ID = 0
    Nov 15 02:21:02.987: ISAKMP (0:1): SKEYID state generated
    Nov 15 02:21:02.991: ISAKMP (0:1): processing CERT_REQ payload. message ID = 0
    Nov 15 02:21:02.991: ISAKMP (0:1): peer wants a CT_X509_SIGNATURE cert
    Nov 15 02:21:02.995: ISAKMP (0:1): peer want cert issued by cn=md902j-n5dros99,dc=md902j,dc=ca,dc=com
    Nov 15 02:21:02.995: ISAKMP (0:1): Choosing trustpoint winca as issuer
    Nov 15 02:21:02.995: ISAKMP (0:1): processing vendor id payload
    Nov 15 02:21:02.995: ISAKMP (0:1): vendor ID is Unity
    Nov 15 02:21:02.999: ISAKMP (0:1): processing vendor id payload
    Nov 15 02:21:02.999: ISAKMP (0:1): vendor ID seems Unity/DPD but major 11 mi.smatch
    Nov 15 02:21:02.999: ISAKMP (0:1): vendor ID is XAUTH
    Nov 15 02:21:02.999: ISAKMP (0:1): processing vendor id payload
    Nov 15 02:21:02.999: ISAKMP (0:1): speaking to another IOS box!
    Nov 15 02:21:02.999: ISAKMP (0:1): processing vendor id payload
    Nov 15 02:21:03.003: ISAKMP (0:1:): vendor ID seems Unity/DPD but hash mismatch
    Nov 15 02:21:03.003: ISAKMP (0:1): Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
    Nov 15 02:21:03.003: ISAKMP (0:1): Old State = IKE_I_MM4  New State = IKE_I_MM4
    Nov 15 02:21:03.007: ISAKMP (0:1): Send initial contact
    Nov 15 02:21:03.067: ISAKMP (1): My ID configured as IPv4 Addr,but Addr not in Cert!
    Nov 15 02:21:03.067: ISAKMP (1): Using FQDN as My ID
    Nov 15 02:21:03.067: ISAKMP (0:1): SA is doing RSA signature authentication using id type ID_FQDN
    Nov 15 02:21:03.067: ISAKMP (0:1): ID payload
            next-payload : 6
            type         : 2
            FQDN name    : R2.cisco.com
            protocol     : 17
            port         : 500
            length       : 20
    Nov 15 02:21:03.067: ISAKMP (1): Total payload length: 20
    Nov 15 02:21:03.095: ISAKMP (0:1): constructing CERT payload for hostname=R2.cisco.com
    Nov 15 02:21:03.095: ISKAMP: growing send buffer from 1024 to 3072
    Nov 15 02:21:03.095: ISAKMP (0:1): using the winca trustpoint's keypair to sign
    Nov 15 02:21:03.215: ISAKMP (0:1): sending packet to 1.1.1.1 my_port 500 peer_port 500 (I) MM_KEY_EXCH
    Nov 15 02:21:03.219: ISAKMP (0:1): Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
    Nov 15 02:21:03.219: ISAKMP (0:1): Old State = IKE_I_MM4  New State = IKE_I_MM5
    Nov 15 02:21:03.375: ISAKMP (0:1): received packet from 1.1.1.1 dport 500 sport 500 Global (I) MM_KEY_EXCH
    Nov 15 02:21:03.375: ISAKMP: set new node -1205710646 to QM_IDLE
    Nov 15 02:21:03.379: ISAKMP (0:1): received packet from 1.1.1.1 dport 500 sport 500 Global (I) MM_KEY_EXCH
    Nov 15 02:21:03.379: ISAKMP (0:1): received packet from 1.1.1.1 dport 500 sport 500 Global (I) MM_KEY_EXCH
    Nov 15 02:21:03.383: ISAKMP (0:1): received packe.t from 1.1.1.1 dport 500 sport 500 Global (I) MM_KEY_EXCH
    Nov 15 02:21:03.383: ISAKMP (0:1): received packet from 1.1.1.1 dport 500 sport 500 Global (I) MM_KEY_EXCH
    Nov 15 02:21:03.383: ISAKMP: Info Notify message requeue retry counter exceeded sa request from 1.1.1.1 to 2.2.2.2...
    Success rate is 0 percent (0/5)
    R2#
    Nov 15 02:21:13.219: ISAKMP (0:1): retransmitting phase 1 MM_KEY_EXCH...
    Nov 15 02:21:13.219: ISAKMP (0:1): incrementing error counter on sa, attempt 1 of 5: retransmit phase 1
    Nov 15 02:21:13.219: ISAKMP (0:1): retransmitting phase 1 MM_KEY_EXCH
    Nov 15 02:21:13.219: ISAKMP (0:1): sending packet to 1.1.1.1 my_port 500 peer_port 500 (I) MM_KEY_EXCH
    R2#
    Nov 15 02:21:23.219: ISAKMP (0:1): retransmitting phase 1 MM_KEY_EXCH...
    Nov 15 02:21:23.219: ISAKMP (0:1): incrementing error counter on sa, attempt 2 of 5: retransmit phase 1
    Nov 15 02:21:23.219: ISAKMP (0:1): retransmitting phase 1 MM_KEY_EXCH
    Nov 15 02:21:23.219: ISAKMP (0:1): sending packet to 1.1.1.1 my_port 500 peer_port 500 (I) MM_KEY_EXCH
    R2#
    Nov 15 02:21:32.651: ISAKMP: received ke message (1/1)
    Nov 15 02:21:32.651: ISAKMP: set new node 0 to QM_IDLE
    Nov 15 02:21:32.651: ISAKMP (0:1): SA is still budding. Attached new ipsec request to it. (local 2.2.2.2, remote 1.1.1.1)
    Nov 15 02:21:33.219: ISAKMP (0:1): retransmitting phase 1 MM_KEY_EXCH...
    Nov 15 02:21:33.219: ISAKMP (0:1): incrementing error counter on sa, attempt 3 of 5: retransmit phase 1
    Nov 15 02:21:33.219: ISAKMP (0:1): retransmitting phase 1 MM_KEY_EXCH
    Nov 15 02:21:33.219: ISAKMP (0:1): sending packet to 1.1.1.1 my_port 500 peer_port 500 (I) MM_KEY_EXCH
    R2#
    Nov 15 02:21:43.219: ISAKMP (0:1): retransmitting phase 1 MM_KEY_EXCH...
    Nov 15 02:21:43.219: ISAKMP (0:1): incrementing error counter on sa, attempt 4 of 5: retransmit phase 1
    Nov 15 02:21:43.219: ISAKMP (0:1): retransmitting phase 1 MM_KEY_EXCH
    Nov 15 02:21:43.219: ISAKMP (0:1): sending packet to 1.1.1.1 my_port 500 peer_port 500 (I) MM_KEY_EXCH
    PLease assist me in sorting this issue, i need to implement on my live network.
    Thanks a lot in advance.
    Regards,
    Mohan.D

    HI Mate ,
    your ASA is sending the ASA certificate :
    but after that we are recieving an isakmp notify message which tears down the connection ?
    somehow the remote peer didn't like the ASA certificate
    do you have access to that peer ? is it a CISCO ASA?
    is the time synchronized with that side ?
    it the CA certificate installed on that peer?
    HTH
    Mohammad.

  • Which digital certificate (SSL) is used when a proxy client is created

    Dears,
    Could someone please guide if there are more than one digital certificate (SSL) added to the SAP system, and we create a proxy client using the 'URL' (https://....) option, than which digital certificate will be used in the check done.
    Thanks.
    Reda

    The names that go on the certificate must match the names you planned when you did the CAS namespace design.
    Some details here:http://blogs.technet.com/b/exchange/archive/2014/02/28/namespace-planning-in-exchange-2013.aspx
    So in your case if the cert does not match the name, then this will prompt users with errors.   They need to match.  As long as all your internal devices trust the issuer of the internal CA then you can use that.   Installing an
    enterprise CA will automatically publish it's root CA  public cert into AD so it works easily.
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Https certificate issue

    Hi
    We wanted to access https://<server>:<port>/index.html and the https services are enabled on our sap system (abap+java). The issue is while accessing the link it ask for a secure digital certificate which is understandable. We do not want every system in the company to manually add the certificates to their local system however wanted to push a digital certificate from our sap system itself so the users in the domain doesnt have to bother about accepting it and putting it in their trusted certificate area. The certiticate required to push from server has been provided by our companies local CA and we are wondering where in VA we should put it so it resolves the issue. Is there anything additional needs to be done after cert implementation. Please advise.
    Regards,
    Pankaj

    Hi Anil,
    I read your response however if you check the note 510007 which talks about exactly what we wanted to implement. The user should not get prompted for the certificate if they are accessing the https link from the same domain and since we got the SAP certificate signed from the local CA; the browsers automatically should understand that this falls under their domain (since all compaines browsers have atleast their domain certificate installed in IE) hence should not ask for certificate again.
    I also have a SAP message open and lets see what they come up with.
    Thanks
    Pankaj

  • Saving copy of a doc prompts 'Choose a Digital Certificate'

    Hi All,
    Whenever i tried to save a copy of excel sheet downloaded from portal, it promts 'Choose a Digital Certificate'. This seems to be happening with only few files and not with all. Can anyone help me out removing this cretificate issue.

    Any Suggestion for this

Maybe you are looking for