How to use given WSDL into SOAP Receiver Adapter.

Hi all,
http://www.webservicex.net/ValidateEmail.asmx?WSDL
I want to use this above given WSDL into SOAP Receiver Adapter.
Can I directly use this link into SOAP Receiver adapter.
Or first I need to register or deploy it somewhere in PI ( Services).
If Yesu2026 Kindly show/Provide me the way..
Regards
Prabhu.

Thanks to all,
i will now try to make the complete end to end scenario.
thanks for now.
I hope above given information would be enough to make end to end webservice scenario.
for now, i i am closing this thread.
if i will find any more further problems in this ... i will come up with new thread.
Thanks all,
Prabhu
I have assigned 2 Points to AMIT , abishek
Edited by: Prabhathcl on Jun 9, 2010 8:39 AM
Edited by: Prabhathcl on Jun 9, 2010 8:39 AM
Edited by: Prabhathcl on Jun 9, 2010 8:40 AM

Similar Messages

SOAP Receiver Adapter using SSL - PI 7.0

Hi all,
i am currently faced with a .net WCF webservice integration using https via SOAP Receiver Adapter in PI 7.0.
Can anybody tell me into which Visual Administrator view i have to import my certificate in order to get https working ?
Thanks in advance,
Martin

It must be the View you have created for your partners. There is usually a Trusted view where you have your own certificate. And there are other views where partners cerificates are stored. There you have to store the certificate.
Regards,
Prateek

Problem in testing SOAP receiver adapter using SOAP UI

Dear Experts,
I'm trying to test my SOAP receiver adapter as mentioned in the blog http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/21844. [original link is broken] [original link is broken] [original link is broken] But, my request from ECC proxy keeps failing in XI communcation channel monitor. I've configured my receiver adapter http://ip:8080/mockSoapHTTPBinding and kept the authentication as NONE. Can any of you suggest?
ip - is my system ip shown in ipconfig.
mockSoapHTTPBinding - is the path.
Thanks.

What is the error of the messages? Are the messages leaving the SOAP adapter?
Please try both:
1. Go to Runtime Workbench -> Component Monitoring -> Adapter Engine -> Test message. Then, execute the message directly without the intermediate of the Proxy sender. This will allow you to check only the receiver SOAP.
2. Please use the TCPGateway tool attached from the note below. It will be a "man-in-the-middle" between the target WS and the Receiver SOAP channel, tracking the whole HTTP/SOAP message. Check if the message is well-formed.
[Note 856597 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 SOAP Adapter|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=856597]
under question "Q: How can I trace the whole message?"

SOAP Receiver adapter : SOAPAction Header appears 2 times using ASMA param

Hi,
I'm using a PI7.1 SOAP receiver channel that uses the ASMA variable THeaderSOAPAction to dynamically add the SOAP action during the mapping. All works fine except that apparently also the 'standard' SOAP action field from the adapter still appears in the request.
( regardless of whether its empty or not )
e.g. the headers from my message look like this
Content-Type: text/xml; charset=utf-8
Content-Length: 863
SOAPACTION: "test"
SOAPACTION: "SetFromASMA"
I'm using conf.put to set the variable in the map. Should I use other method to 'replace' the existing ?
Did somebody experience this as well ? Any suggestions ?
rgds
Dirk

Hi Michael,
Yes, I did see this but :
1) The 'replace' command here is just a java string replace command to manipulate the content before setting the dynamic variable ( nothing to do with replacing an existing dynamic variable in the HTTP headers )
2) I did add first a 'get' to my code after seeing this but that did not work neither ( it even seems that at the time of mappnig execute the static value from the channel is not yet known as the 'get' returns a blank value for the key. ( but then again this is normal because we are only at the mapping step )
It seems that the adapter does not check upfront ig a SOAPACTION was already present or not
( I think this worked in PI 7.0 )
I will submit an oss,
rgds
dirk

Using SSL in SOAP Receiver Adapter

Hello,
We need to execute a web service that requires using SSL connection. We have done following:
1. Deployed SAP Java Cryptographic Toolkit
2. Uploadted the Server certificates chain(Root, Intermediate, and the Server certficate itself) in TrustedCAs view
But I can't see the certificate from the Communication Channel screen.
Could anybody who has done this before please let us know if we are missing anything. I appreciate if anybody can tell us the trouble points/pit falls in this process.
Any help is greately appreciated.
Regards
Venu

Hi,
You need to setup SSL layer for HTTPS endpoint.
Possible HTTP security levels are (in ascending order):
HTTP without SSL
HTTP with SSL (= HTTPS), but without client authentication
HTTP with SSL (= HTTPS) and with client authentication
HTTPS comes in two flavors, both ensuring the confidentiality of data sent over the network
Please go through below link for referance (above information is from below link)
SAP Network Blog: How to use Client Authentication with SOAP Adapter
/people/rahul.nawale2/blog/2006/05/31/how-to-use-client-authentication-with-soap-adapter
SSL useage
Step by step guide for SSL security
step by step guide to implement SSL
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ff/7932e4e9c51c4fa596c69e21151c7d/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/13/4a3ad42ae78e4ca256861e078b4160/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3a/7cddde33ff05cae10000000a128c20/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0a/0a2e0fef6211d3a6510000e835363f/content.htm
General guide
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a09f3d8e-d478-2910-9eb8-caa6516dd7d9
Message level security
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d024ca8e-e76e-2910-c183-8ea4ba681c51
Regarding message level you can encrypt the message using certificates.
For both of this basis team has to deploy the releavant certificates in XI ABAP Stack or Java stack.
Generally if the scenarios are intra company we dont use any transport level or message level security since the network is already secured.
Check the following links.. you will get the information all about the securities...
http://help.sap.com/saphelp_nw04/helpdata/en/f7/c2953fc405330ee10000000a114084/content.htm
Also read thru this link for message level security - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d024ca8e-e76e-2910-c183-8ea4ba681c51
Also find soeminformation in these links
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/882a40ce93185de10000000a1550b0/frameset.htm
/people/aparna.chaganti2/blog/2007/01/23/how-xml-encryption-can-be-done-using-web-services-security-in-sap-netweaver-xi
Thanks
Swarup
Edited by: Swarup Sawant on Apr 9, 2008 7:42 PM

How to use XML Anonymizer Module for receiver mail Adapter?

Hi All,
I would like to know how to use XML Anonymizer Module for receiver mail adapter so as to change the namespace to http://sap.com/xi/XI/Mail/30 from my original namespace? Thank you all in advance?

Hi,
This may help u:
Replacing one namespace with another using XML Anonymizer Module
Thanks
Amit

How To use window.print() into Button Attributes

hi,
I want to print a report using an print button.so i am using window.print() function into Button Attributes .But Print pop up screen not pop up . How To use window.print() into Button Attributes .
Thanks
Manoj

dear hari
"Set button target as URL and put following js as URL Target
javascript:window.print();"
Will this be useful to my another thread raised as follows.
In case, if i am able to generate report as txt (ascii) file instead of doc / pdf and is it possible to send the txt file using host command. I am uable to try since i do not know where to place host command on click &print.
yours
dr.s.raghunathan

SOAP Receiver Adapter - Target URL

Hi,
We have a web service scenario, where the Sender is a III Party Java system and PI is the middleware and ECC as our receiver system. We have a wsdl binding generated from SOAMANAGER. We are using the WSDL Endpoint as the Target URL in our SOAP Receiver Adapter. The scenario works perfect with desired results.
Now that webdispatcher comes into place for load balancing and the BASIS team has given a different URL to use in the Target URL of the SOAP Reciver Adapter. The scenario throws the following eorr:-
Adapter Framework caught exception: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 302 Redirect
Has anyone come acrossed such issues. Looking forward for a solution.
Thanks & Best Regards.
Kris

> Now that webdispatcher comes into place for load balancing and the BASIS team has given a different URL to use in the Target URL of the SOAP Reciver Adapter. The scenario throws the following eorr:-
>
> Adapter Framework caught exception: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 302 Redirect
>
> Has anyone come acrossed such issues. Looking forward for a solution.
I wonder why your basis team is not able to help you.
It seems that the web dispatcher is not set up correctly.
http://en.wikipedia.org/wiki/HTTP_302

Dynamic URL in SOAP Receiver adapter

Hi all,
I have a scenario where I am using a SOAP receiver adapter to send a cXML document to some vendors. I need to change the URL based on the vendor number (passed by sender SRM system). So I have created a user-defined function and used in message mapping to assign the right URL to the variable TServerLocation. But the communication channel still prompts for a static URL which appears to be a mandatory field. Even though the DynamicConfiguration tab in Message Monitoring shows that the TServerLocation was correctly assigned, the scenario does not work when I put some dummy in the static URL field like 'dummy' or '*'. Any ideas on how to make the communication channel go for the dynamic URL field and ignore the static URL field? I have already selected the'Use Adapter Specific Message attributes' and 'Variable Transport Binding' check boxes. Am I referring to the correct variable that references the target URL? Also other than the two checkboxes that I mentioned, I am not displayed anything else under "Adapter Specific Message Attributes" section in the comm. channel.
Thanks

James,
I ve just been digging into SAP help, and have tried it too ... Looks like it doesnt work the way it is supposed to.
Anotheer point i found was, in the FILE ADAPTER, when we say ADAPTER SPECIFI ATTRIBUTES , we can select the attirbutes.. This is not possible in a SOAP adapter...
Maybe, we can only access the ADAPTER SPECIIFC ATTIRIBUTES of a SOAP adapter, but cannot set them dynamically.
Let me know if you find something on this issue.
Regards,
Bhavesh

Soap Receiver Adapter Error. Pls advice urgent

Hi All,
While using Soap Receiver Adapter for synchronous communication
*My Soap Request is:*
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:SendMessage xmlns:ns1="urn:MMWebSrvService">
<strFrom>XI</strFrom>
</ns1:SendMessage>
*My Soap Response from server is:*
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<tns:SendMessageResponse xmlns:tns="urn:MMWebSrvService" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<return xsi:type="xsd:int">-1</return>
<strErrorDescription xsi:type="xsd:string">String reference not set to an instance of a String. Parameter name: s</strErrorDescription>
</tns:SendMessageResponse>
How to resolve the error.
Regards

Henry,
Your xml message is not xsd compliant...see if you can generate a xml message using your wsdl with random values, compare that to your imcoming msg..and thats your issue..
Hope that helps
Regards
Ravi Raman
Reward points if helpful !

SOAP Receiver Adapter issue

Hello there,
I am using a SOAP receiver adapter. The URL contains the format - https://<XYZ.com>/car/soap/Sync?login=username&pass=password
Now, if I configure the channel by using the "Configure User Authentication", the data is not getting posted at target.
But if I provide the user id / pwd in the URL, it gets posted.
I don't want to use the user id / pwd in the URL but at the sametime, the WS team is not ready to change the format of the URL.
Can I use "Query String" to handle that? If yes, how? If no, what options I have?
Thanks for your precious input and time.
Abhi

Thanks Suraj!
Have you tried this:
url : https://<XYZ.com>/car/soap/Sync
and Configure User Authentication option set
I haven't tried it that way. I am not sure whether that will work, as WS team told me that I am required to put in the whole URL. But thanks for your suggestion, I will give it a try that way.
also try specifying the SOAP action as per your wsdl file
SOAP Action is not Mandatory, so I am not using that.
Thanks,
Abhi

Soap receiver adapter exception

Hi,
I am using SOAP receiver adapter to access a web service that is hosted on SAP Web AS (in this case it is the integration server Web AS). I use the web services navigator to test the web service and the web service works fine. The name of the web service is 'RemoteCrossReferenceProcessor' and it has one operation 'crossReference'.
But with the soap adapter, I am getting OperationNotFoundException in the logs and my web service is not getting accessed. Here is the server log:
<u><i>An error occurred while processing the message security. Reason: . See trace entry .#3#com.sap.engine.interfaces.webservices.runtime.OperationNotFoundException#Found 0 operation definitions using keys: Key name:'first-body-element-ns' key value:'urn:RemoteCrossReferenceProcessor'; Key name:'SoapRequestWrapper' key value:'crossReference'; #[no trace for com.sap.security.core.server.ws.service.ServerSecurityProtocol (severity above PATH)]#
#1.5#0003BA0FF9EA0022000000840000688D0003F9349A3C2D61#1118429251382#com.sap.aii.af.ra.ms.impl.core.queue.SendConsumer##com.sap.aii.af.ra.ms.impl.core.queue.SendConsumer.onMessage(QueueMessage)######b40aca80d9be11d994360003ba0ff9ea#SAPEngine_System_Thread[impl:5]_47##0#0#Error##Java###Transmitting the message to endpoint using connection failed, due to: .#3#AFW#com.sap.aii.af.ra.ms.api.RecoverableException: NO_BACK_SYSTEM_IN_HOPLIST:#http://sapsand1:8000/sap/xi/engine?type=entry#</i></u>
Here is adapter configuration:
Transport Protocol:HTTP
Message Protocol:SOAP 1.1
Adapter Engine:Integration Engine
Target URL: http://<server_name>>:50000/RemoteCrossReferenceProcessor/Config?style=document
User:
Password:
Default SOAP Action:
I imported the WSDL into the external definition and used the messages from the WSDL for defining my interface mappings.
I am using XI 3.0 SR1 (SP 09).
I am out of ideas as to why the SOAP adapter is not calling my web service. Please help me with your suggestions.
Thanks and Regards.

HI Dani,
I was looking for this error and I found this post AXIS SOAP Receiver. This post says about other errors, but sugests many ideas to found the soluction, like:
1- non-deployed all AXIS jars; (but in this case it deployed all)
2- Exists this note for one erro in AXIS: (https://service.sap.com/sap/support/notes/1028961).
3- this document (http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b092777b-ee47-2a10-17b3-c5f59380957f) that have sets for header parameters. This is interesting becouse one of this parameters is obligatory but isn't filled, can occur error like "null object".
By the way, you can check if have update to AXIS (http://ws.apache.org/axis/), becouse isn't a SAP application and in other systems can have this error.
I hope this helps,
Romerito Silva

SOAP Receiver Adapter (Asynchronous Call)

Hi All,
Scenario is Proxy to Webservice asynchronous call.
Scenario configuration is done as follows.
1) Imported the WSDL and using as a asynchronous inbound interface.
2) SOAP receiver channel is configured with the target URL & soapAction as given in the WSDL as (soap address & soap Action).
3) Configured the proxy server details as required.
SOAP channel is successfully sending the message to the application as DLVD.
But the issue is target application not receiving the data. What could be the reason ? I am wondering , i have tried with the external tool like Altova XML Spy & SOAP UI sending data to the webservice & it's working fine.
Please suggest me if anything which can help to resolve this issue.
Thanks
Ashwin

In this case you can do the following:
1. start your tcpmon or TCPGateway, add there a listener e.g. on port 9090
2. configure the target URL in TCPGateway for this listener
3. configure the target URL in your XI SOAP Receiver Adapter to http://<ip of TCPGateway>:9090
4. now execute the scenario again in XI
(make sure XI can reach your TCP Gateway, e.g. check Proxy)
I have used this method successfully for error tracking. In some cases it is necessary to add 2 listeners in TCPGateway and route e.g. 9090 to 9191 and from there to the end (I did not analyse why).
Then you will be able to see what XI is really sending and you will see the full response from the partner side. You can then compare the XI request data with those which are sent via soapUI. This should give a clue about the problem.
CSY

URL in SOAP Receiver Adapter

Hi,
I was given a WSDL file which contains the following:
<wsdl:port name="ZISU_INSTLN_CREATE" binding="tns:ZISU_INSTLN_CREATE">
<soap:address location="http:// hostname:port /sap/bc/srt/rfc/sap/zisu_instln_create/100/zisu_instln_create/zisu_instln_create" />
</wsdl:port>
I've configured a SOAP receiver adapter. In the URL i put the SOAP address location from the WSDL.
Is this correct?
I am seeing the following error when i try to send a message:
Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.net.ConnectException: Connection refused: connect.
Is the error because of the url I use?
Thx
Robert

Hi,
I do have details in the message:
- <detail>
- <ns:SystemFault xmlns:ns="http://www.sap.com/webas/710/soap/runtime/abap/fault/system/">
<Host>undefined</Host>
<Component>COREMSG</Component>
- <ChainedException>
<Exception_Name>CX_SOAP_CORE</Exception_Name>
<Exception_Text>SRT: Wrong Content-Type and empty HTTP-Body received: ("HTTP Code 200 : OK")</Exception_Text>
</ChainedException>
and there is lot more if it helps finding the error, but maybe this is already enough.
Also i tried testing with SOAPUI now:
Result is good. I dont get error's. I get a response from my request as expected.
But if I test with XML from the RWB, with he same data as in SOAPUI, i get the error message again.
Conclusion:
SOAPUI can communicate with my SAP ISU system.
But PI cannot communicate with it.
Why?
Thx
Robert

SOAP Receiver adapter target url and method details

Hi Friends,
I am working on file to SOAP interface.
I know using SOAP receiver adapter , we need to have target URL and action.
Here, how client need to give target url and action as they are not aware of these things..please suggest.
Also if we are generating inbound service interface,how they have to handle this from their end.
Thanks
Kishore

Get the WSDL file from ur Third party client and u can use the WSDL file as an External definition in PI and WSDL file also has WSDL URL which u can use in SOAP receiver adapter.
For INbound SOAP case-
Generate the WSDL file in XI and give that WSDL file to ur third party client which will send the data using the WSDL URL mentioned in the file.
refer below blog for understanding in detail:-
How to use SOAP adapter:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4
chirag

How to use given WSDL into SOAP Receiver Adapter.

Similar Messages

Maybe you are looking for