How to use HTML5 Video in adf page

Hi,
I need to use HTML5 video instead of af:media in my adf page inorder to avoid browser plugin request to the end user.
I've placed the video tag in .jsff as below:
<video width="320" height="240" controls="controls" poster="../resource/poster.png">
<source src="../resource/FAE_Intro_cropped.mp4" type="video/mp4" />
<source src="../resource/FAE_Intro.ogg" type="video/ogg" />
Your browser does not support the video tag.
</video>
When I run the web application, it shows the poster image but it does not show the video. It simply shows a 'X' in the center.
I'm using jdev version:
Studio Edition Version 11.1.1.3.0
Build JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660
Can someone please help me in this regard.
Thanks,
Bhaskar Podugu

Yes. I tried surrounding with f:verbatim tag but still it did not worked.
The actual HTML file when run outside of jdev (i.e., going to the folder and double clicking the .html file) is showing up the video but when the same is run through jdev as a deployment, it doesn't show up.
I'm testing this in Mozilla FF 9.0.1.
If the reference to the video file is incorrect, it shouldn't even show the poster image but I can see the poster image which is also placed in the same location.
I tried placing af:inlineFrame(pointing it to the actual HTML file) inside jsff page, but it did not work.
Does weblogic server need any configuration for flushing HTML5 Video content?

Similar Messages

  • Multiple HTML5 Videos on one page

    How can I get more than one HTML5 video on one page?  When I tried to place 4 3-sec videos with autoplay and looping, only the first one plays.
      <video height="300" weight="300" controls preload="none" autoplay loop>
    <source src="video1.m4v" type= "video/mp4"/>
      <video height="300" weight="300" controls preload="none" autoplay loop>
    <source src="video2.m4v" type= "video/mp4"/>
      <video height="300" weight="300" controls preload="none" autoplay loop>
    <source src="video3.m4v" type= "video/mp4"/>
      <video height="300" weight="300" controls preload="none" autoplay loop>
    <source src="video4.m4v" type= "video/mp4"/>
    Thank you

    Hi
    Unfortunately you cannot, as most browsers use an "exclusive OR" code for playing videos, which means that only one will play at a time. The reason for this is that if they did not do so you could have multiple soundtracks playing at the same time.
    There are 3rd party players that will do this though, (sorry cannot recommend any specific player, but try a search).
    PZ

  • How to use a collection in ADF

    Hi all,
    How to use the collection in ADF.
    Thanks in advance
    C.Karukkuvel

    hi John,
    Scenario:
    In my page,i have two tab pages .In that when the user enter the Location names in the first tab.when the user navigates to the next tab,we need to give the LOV having the Loactions based on the first tab values.
    when i try to use the view object it will list only the data's in the database.but i needs the locations entered in the current page also.pls guide me in this
    Thanks & Regards
    C.Karukkuvel

  • How to use image maps in ADF 11g

    Can somebody point me to code snippet for using image maps in JSF Page.
    I just want to use image maps in my application..but i don't know how to use image maps in ADF.
    -Deepti

    Hi chris,
    My DataBase script is given in below
    CREATE TABLE XXSR.SR_HIERARCHY
    FORM_ID NUMBER,
    FORM_NAME VARCHAR2(30 BYTE),
    PARENT_FORM_ID NUMBER,
    FORM_LOCATION VARCHAR2(1000 BYTE),
    IMAGE_FILE ORDSYS.ORDIMAGE
    I want to store the image in database from front end using ADF 11g
    -Deepti
    Edited by: 913387 on Feb 24, 2012 5:36 AM

  • How to display flash file in adf pages

    how to display flash file in adf pages need help

    Thanks all,
    It is resolved.
    the code i am using to display a flash is below.
    <f:verbatim>
    <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000"
    codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version
    =10,0,0,0" width="300" height="300" id="11gR1_aniH_grey" align="middle">
    <param name="allowScriptAccess" value="sameDomain" />
    <param name="allowFullScreen" value="false" />
    <param name="wmode" value="transparent" />
    <param name="movie" value="mx2004demo.swf" />
    <param name="quality" value="high" />
    <param name="bgcolor" value="#4d5c64" />     
    <embed src="../Images/mx2004demo.swf" quality="high" width="300" height="300" name="mx2004demo.swf" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false"
    type="application/x-shockwave-flash" wmode="transparent"
    pluginspage="http://www.adobe.com/go/getflashplayer" />
         </object>
    </f:verbatim>

  • How to use Multiple selection in ADF faces

    i i would like to know how to use an multiple selection (ADF select many choice) to update the database.

    Hi,
    Timo is correct that there is no automated way for doing this. You can access the select many selection from a managed bean either accessing the ADF binding layer or by referencing a managed bean array property. So the use case is important. Use case would include the database attribute type to update
    Frank

  • How to use a webservice in  JSPDyn page

    hai,
       I have created one webservices but i donot how to use that webservices in JSPDyn page.
      can anyone give solution for this problem
    Rds
    Shanthakumar

    Check out the Axis user's guide at: http://ws.apache.org/axis/java/user-guide.html

  • How to use autosuggest feature in adf?

    how to use autosuggest feature in adf?

    You can refer below link
    http://www.oracle.com/technetwork/developer-tools/adf/learnmore/004-auto-suggest-169120.pdf
    Thanks
    AJ

  • How to use application item in the page template

    How to use application item in the page template.
    Thanks,
    rajendra

    Hi,
    You can refer application item value in template like &MY_ITEM. (note period at end)
    http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/concept_sub.htm
    Regards,
    Jari

  • How to use the video in on 9500XT

    Hey I was wondering if there is any way to find out how to use the video in on my 9500XT
    I read on another forum but that didn't help me, so I throught this would be alot better beause MSI makes the card  
    Could anyone help me or give me links to find out how?
    Thanks!  

    Nobody knows?
    Come on someone must know  

  • Trying to figure out how to use a video's alpha channel to define its hitspace for a button

    Hello, I'm trying to figure out how to use a video's alpha channel to define its hitspace for a button. I would greatly appreciate anyone's help with this.

    Currently I'm doing an image sequence inside of a movie, and putting the movie in the button. I hope that's what you're asking. Not sure if I entirely understand your question. (Been a little while since I used the interactive side of Flash)
    Anyway if you have a specific process that you personally do that works I'd happily conform to your solution.

  • How to embed HTML5 video player in web page

    I have developed a video player using html, javascript and jquery. depending upon the browser type and mobile/non-mobile device, it creats the html5 video tags or redirect to a fall back flash player). I am using Adobe media server
    this player works well on all the browsers.
    videoplayer.html
    <!DOCTYPE html>
        <html>
           <head>
    </head>
    <body>
    <video controls="controls" poster="http://sandbox.thewikies.com/vfe-generator/images/big-buck-bunny_poster.jpg" width="640" height="360">
              <source src="http://clips.vorwaerts-gmbh.de/big_buck_bunny.mp4" type="video/mp4" />
              <source src="http://clips.vorwaerts-gmbh.de/big_buck_bunny.webm" type="video/webm" />
              <source src="http://clips.vorwaerts-gmbh.de/big_buck_bunny.ogv" type="video/ogg" />
                        <object type="application/x-shockwave-flash" data="http://releases.flowplayer.org/swf/flowplayer-3.2.1.swf" width="640" height="360">
                        <param name="movie" value="http://releases.flowplayer.org/swf/flowplayer-3.2.1.swf" />
                        <param name="allowFullScreen" value="true" />
                        <param name="wmode" value="transparent" />
                        <param name="flashVars" value="config={'playlist':['http%3A%2F%2Fsandbox.thewikies.com%2Fvfe-generator%2Fimages%2 Fbig-buck-bunny_poster.jpg',{'url':'http%3A%2F%2Fclips.vorwaerts-gmbh.de%2Fbig_buck_bunny. mp4','autoPlay':false}]}" />
                        <img alt="Big Buck Bunny" src="http://sandbox.thewikies.com/vfe-generator/images/big-buck-bunny_poster.jpg" width="640" height="360" title="No video playback capabilities, please download the video below" />
              </object>
                        </video>
    </body>
        </html>
    ============================================
    If I embed this video player in any of the aspx page using <EMBED></EMBED>, the redirection to flash player does not happen.(it works fine on chrome and safari but not on IE and firefox)
    <EMBED height=360 width=250 src="http://localhost/videoplayer.html"></Embed>

    I used <object> to make it work in IE and Firefox
    <object type="text/html" data="http://64.165.34.7:8134/videoplayer.html?size=1&playlist=2" style="width:460px; height:260px"></object>

  • How to use Java Script in jspx pages of ADF Faces?

    I wanna invoke an Applet in a jspx using Java Script...
    How can I do this? :)

    check my other post..that's to know how to use js in jsf pages...not to invoke applet..
    Re: how to Add inline JavaScript to a Page 11G

  • How to use HTML Video for iPad in iWeb

    I agree with all the advantages of HTML Video. How do you use html video on your iweb site?
    I want my iWeb site video to be viewable on iPads.
    I have learned the technique to use the HTML Snippet tool in iWeb to successfully post Flash video. I created all of my animations using Kenote's keyframe ability and have exported them to Quicktime and then have converted them into flash with Vertical Moon's Video to SWF. Then simply upload the SWF file to a folder on your idisk, then use the Flash Video insert HTML Snippet and insert the idisk url of the SWF file and you are done. What is the technique for HTML Video?
    I have found some HTML video encoders, here are the links:
    http://www.projekktor.com/ the technique is not clear to me and appears complicated.
    http://www.brightcove.com/en/ this one is way too expensive at $99 a month.
    http://jilion.com/sublime/video this one looks great but is not yet available and I am guessing it is a converter that will make your iMovie Quicktime into HTML Video.
    I have all of the i-Apps and Final Cut Express (2 revs out of date). Can I get the proper HTML video file from these programs, unless I am missing something I don't think so.
    Most people do not believe I made my site completely with Keynote and iWeb but here it is. http//www.falcon-pacific.com
    Thank You Very Much for considering my question. I will put the results on my iWeb site and the exact procedure and acknowledge all the sources of the solution.

    I want my iWeb site video to be viewable on iPads.
    Your videos ARE viewable on a iPad. No need for explicit HTML video coding.
    If you export your movies to iPhone that's all there is to do. You can do it in QT Pro/iMovie
    And HTML Video is a HTML code, not the movie itself :
    <video width="480" height="270" src="movie.m4v" controls></video>
    I use the iPad simulator in the SDK :
    http://developer.apple.com/ipad/sdk/
    Here's the result :
    http://ipad.dailynews.webege.com
    My blog : [html5 video|http://www.wyodor.net/blog/archives/2009/06/entry_181.html]
    And some links in my post in this topic : [HTML 5 in IWEB|http://discussions.apple.com/thread.jspa?threadID=2404927&tstart=30]

  • How to draw a line on ADF page between two nodes  for mapping.

    Hi everyone,
    Does anyone have a solution that how can I wiring two points by drawing a line on ADF pages.
    My scenario is user want to do a mapping between two xml files. We will build an ADF faces page. This page have two parts, left part contains one tree(base on the source xml), right part is the destination tree(target xml). User can drag an node from left and drop to right. Meantime, a line will be created to connect two node, it would be perfect that when user scroll down the page, or extend the tree node, the line between source and target will be remain connection two node.
    Does anyone have a solution for this, thanks in advance.
    Hongfu.

    so you want to do something like. xsl mapper in soa
    http://www.haertfelder.com/images/pSoaBPEL3.png
    i can think of using javascript.. not sure... neeed extra programming..

Maybe you are looking for