How to use Jdeveloper 10g (10.1.3.4.0) or 11g to create J2ME apps?

I can't find any tutorials or documentation in how to do this in the current version of Jdeveloper 10g or 11g.
All I could find was the Jdeveloper Wireless Extension 9.0.5 but this doesn't work in either versions.
Also I don't want to do browser apps or I would just do the Mobile ADF, I want to do MIdlets more specifically one that will connect to a Web Service.
If any one could point me in the right direction I would greatly appreciate it!

Due to improvements in network coverage and communications, the need for a truly disconnected/on device application is diminishing. If your requirements can be mostly met with an online solution, I would recommend checking out ADF Mobile in 11g that support you to create a browser application optimized for mobile browsers.
What is the scenario that you are trying to support? Feel free to reply to this thread or to me directly. There are efforts in the works, and I'd like to hear what you are trying to build.
Thanks,
Joe Huang

Similar Messages

How to use JDeveloper 10g making setup file?

I am a novice.
Step by step tell me,please.
thanks!

Again more details will be helpful, what type of application is a desktop application? Web application?
For desktop applications JDeveloper offers you wizard to work with the Webstart technology. more info in the Swing section of this page:
http://www.oracle.com/technology/products/jdev/collateral/collateral10g.html
For web deployment you can just use the WAR and EAR deployment profile wizards.

About how to build dynamic maps using jdeveloper 10g and mapviewer

i follow the guidance (about how to build dynamic maps using jdeveloper 10g and oracle application server mapviewer) to write a jsp file,but error take palce ,i get information "Project: D:\jdev1012\jdev\mywork\WebMap\ViewController\ViewController.jpr
D:\jdev1012\jdev\mywork\WebMap\ViewController\public_html\WebMap.jsp
Error(12,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,190): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,102): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,28): cannot access class oracle.lbs.mapclient.MapViewer; file oracle\lbs\mapclient\MapViewer.class not found
Error(12,40): cannot access class oracle.lbs.mapclient.MapViewer; file oracle\lbs\mapclient\MapViewer.class not found
Error(13,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(13,198): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(13,106): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(14,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(14,188): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(14,101): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(15,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found
Error(15,200): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found
Error(15,107): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found"
can you help?
greetings

I found a lot of information in document 133682.1 on metalink.
step by step example how to deploy a JSP business component application.

How can i build application using Jdeveloper 10g for Weblogic server 10.3

Hi,
We have a requirement where in we want to build an SOA application using Jdeveloper 10g for Weblogic Server 10.3.
Is there any way to make a connection to Weblogic Server 10.3 from JDeveloper 10g? If there is any way please share it with me.
Thanks,
Amit Kumar

Amit,
SOA Suite is not yet certified for WLS 10.3. You have to wait for the certification of it.
At the moment you can't install the SOA Suite on WLS 10.3 nor connect from JDev 10.1.3 to it.
--olaf

How to use Jdeveloper Debugger

Hi Friends,
Some one tell me how to use jdeveloper debugger for debugging OAF Code in jdeveloper 10g
Thanks & Regards
Tarun

hi, i also installed sqldeveloper and got the same error message. can you help troubleshoot this error?
Connecting to the database ccs_c_edwdev.
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '127.0.0.1', '1551' )
ORA-30683: failure establishing connection to debugger
ORA-12541: TNS:no listener
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1
Process exited.
Disconnecting from the database ccs_c_edwdev.

How to use JDeveloper with manifest.mfs?

I'm trying to figure out how to use JDeveloper to setup a J2EE application that contains two Web applications so that the Web applications will share the same instance of a log4j library.
I've created the two Web apps and their deployment profiles and I've created a deployment profile for the EAR that contains the two Web apps. I've successfully deployed the EAR to the stand-alone OC4J on my development system and run the two Web apps. Currently the two apps use a log4j library in j2ee\home\lib, but that option doesn't support using separate log4j.properties files for each application.
I've read the pre-release 9iAS 9.0.4 Servlet Developers Guide document and would like to use the third option described in the Guide's appendix that tells how to share the log4j library by specifying the log4j.jar file in a class-path entry in manifest.mf.
My problem is I just don't understand the in's and out's of using/creating manifest.mf files with JDeveloper and its deployment profiles.
Do I create manifest.mf's myself, and if so where should they be in the source folder heirarchy? Should the manifest.mf files for both Web apps include class-path entries for the log4j library, or only the manifest.mf file for the EAR? What are the right manifest.mf settings to use in the deployment profiles for the Web apps and the J2EE app?
For example, should the EAR deployment profile be configured to merge the manifest.mf files of the two Web apps? Is it necessary to make one of the Web apps dependent on the other Web app?
Thanks,
Al Margheim

Hi,
Thought I'd use the same subject, because it matches my problem. The questions are:
1. How do I get JDeveloper to use MANIFEST files properly? I'm using 9.0.3.1 and I have tried (un)checking different options in the EJB JAR/EAR deployment profile, but I never get the archive structure I want.
2. How do I include third-party JARs in the final EJB JAR/EAR? Any attempt I make to include a library JAR ( via Project Settings or by adding to the project) gives me an expanded set of classes contained in the JAR file, which is something I don't want.
Of course, I could easily achieve all that I want with Ant, and it will have to be outside JDev (using Ant within JDev prevents JDev from offering me its "full feature set"!). But I'd like to be able to do this while I'm still in the IDE (for what it's worth).
Any suggestions/recommendations/pointers are welcome.
regards
George

How to use jdeveloper with linux?

how to use jdeveloper with linux?
Hello, i've download jdeveloper, and i have java1.4 installed. But i can't run jdeveloper i have jdev.exe and jdev but when i put /usr/local/jdev/bin/jdev a have a message like file not found. I don't know what to do.
Help please!!!
Ori.

You need to go to the directory where you unzipped JDeveloper, for example:
cd opt/jdev/jdevj2eebase1013/jdev/bin
Once there, do this:
chmod +x jdev
chmod +x ojc
Now you can try this:
nohup ./jdev &
or simply
./jev
I usually create a soft link in ~/bin

I recieved an Adobe Master Collection License number from my school (Stevens Institute of Technology) and I can't figure out how to use it in order to get the product. I've created a username and that's as far as I've gotten.

I recieved an Adobe Master Collection License number from my school (Stevens Institute of Technology) and I can't figure out how to use it in order to get the product. I've created a username and that's as far as I've gotten. I need to download the product and I can't figure out where to begin.

Ask someone at your school... Do you have a Cloud redemption code, or a CS6 serial number?
If Cloud, Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html and
http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
What it is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
If CS6, download at Other downloads and enter your serial number when prompted
Again... your 1st resource is your school

How to create a "pjc" using jdeveloper 10g

Hi guys
I am trying to make my first pjc (pluggable java component) using jdeveloper (default installation with Oracle developer 10g). I was following the [Jdeveloper 9 documentation||http://www.oracle.com/technetwork/developer-tools/forms/index-087743.html] from OTN and got stuck once after creating the PJC1.java
According to the documentation, the property inspector should allow me to change various properties for the newly created .java file and let me add new events with the events tab. In my case, once after I select the java item from UI, the property inspector doesn't show anything. No tabs for properties or events :O
If somebody could point me towards Oracle documentation for Jdeveloper 10g, it would grateful.
regards,
raj
Edited by: rthampi on Apr 27, 2013 8:50 PM

CraigB wrote:
Oracle jDeveloper 10.1.2.1.0 was the last version the inclued the Forms PJC Wizards. All versions after this didn't include them. You can actually develop a PJC using any IDE, but I have found using the PJC Wizard to be extreamly helpful. Java is not my strongest skill and I don't do a lot of Java PJC development so I keep this version installed for when I need to work on PJCs.
Craig...Thank you Craig. We are with Oracle ERP R12 from 2009 June and almost all our legacy applications were either made a part of the ERP suite, or hosted with Weblogic server 10.3.6. As leading the development team, my biggest challenge is making the custom applications migrated to 11g forms/Reports "behave" exactly like the ERP suite.
We wanted to design a parameter screen for the reports, almost like with ERP Suite, where the parameter columns are dynamically created during runtime and the biggest challenge was to limit the MAXIMUM LENGTH for those columns, thus started our venture to find an appropriate solution. After spending almost 20 years in the field of software development, I just didn't want to copy a jar file from the web and get over with it. Instead I wanted to understand what the codes do.
Anyway, Francois was kind enough to provide the .java with his pjc blog and I created a new pjc based on this .java code :) and my objective was satisfied. If Oracle really wants to "kill" the forms/reports, I think they just should do that, instead of removing few highly sought components with so called "Newer versions"
Ridiculously the documentation library for JDeveloper 10.1.0 is empty, even though it is listed with Oracle documentation library.
Cheers guys
raj

How to create a database connection using Jdeveloper 10g

when i try to create a database connection,its asking for connection name.is that connection name is user-defined or predefined name??In the next step its asking for username and password.where do i get that username and password.if anyone know this please explain me in detail coz this is for the first time am using JDeveloper.
Thanks in advance.

Hi user583040,
May be you could have a look on this: http://my.opera.com/Tiftif/blog/faq-jdeveloper-english §5.2. If you have suggestions to improve this document, i will greatly appreciate to add them to it.
Regards,
Tif

Deploying SQLJ classes as Java Stored Procedures using JDeveloper 10g

Hello,
I have defined a SQLJ class, MwaSqljDao.sqlj, in JDeveloper. When I right click on the SQLJ class and "make" the class. It appears to succeed.
However when I attempt to build the project in which the SQLJ class is a member of, a class that uses the SQLJ class has the following compile error:
- MwaSqljDao not found.
After a little digging it appears JDeveloper is able to compile the .sqlj file to a .java file in the classes output directory. However it does not take it to the next step of compiling the .java file into a .class file.
Is SQLJ still a main stream Oracle technology? Or has it been cast to way side to make way for other technology?
If SQLJ is still a supported Oracle technology how do go about compiling the SQLJ class using JDeveloper?
My goal is to deploy SQLJ into JServer as a Java Stored Procedure class.
Thank you,
Rob

Excellent.
Especially that you resolved it and even more so that you posted the solution.
I do wonder whether you would have gotten help (faster) has you asked in a JDeveloper-related forum such as " Forum Home » Developer Tools » JDeveloper and ADF" at JDeveloper and ADF

Problem in using JDeveloper 10g with JHeadstart

I am using JDeveloper 9.0.3 and jheadstart 9.0.4.5 and I would like to test jdeveloper 10g preview with JHeadstart.
So, I have downloaded the JDeveloper 10g to test it with my old application.
Having run the Jdeveloper for the first time, I realized that Jdeveloper
installed the jheadstart automatically and following message was shown in the message window :
E:\Software\10g\JDev10g\jdev\lib\ext\jheadstart\PrjWizard.jar!\META-INF\jdev-ext.xml
Error: <Line 12, Column 24>: XSD-2034: (Error) Element 'description' not expected.
Error: <Line 13, Column 17>: XSD-2034: (Error) Element 'help' not expected.
Error: <Line 17, Column 27>: XSD-2034: (Error) Element 'dependency_addin' not expected.
Converting JDeveloper 9.0.3 extension manifest to 9.0.5
E:\Software\10g\JDev10g\jdev\lib\ext\jheadstart\JhsShare.jar!\META-INF\jdev-ext.xml
Converting JDeveloper 9.0.3 extension manifest to 9.0.5
E:\Software\10g\JDev10g\jdev\lib\ext\jheadstart\MvcFrameworkServiceFileViewer.jar!\META-INF\jdev-ext.xml
Converting JDeveloper 9.0.3 extension manifest to 9.0.5
E:\Software\10g\JDev10g\jdev\lib\ext\jheadstart\JHeadstartDesignerGenerator.jar!\META-INF\jdev-ext.xml
Converting JDeveloper 9.0.3 extension manifest to 9.0.5
E:\Software\10g\JDev10g\jdev\lib\ext\jheadstart\JAGLauncher.jar!\META-INF\jdev-ext.xml
Converting JDeveloper 9.0.3 extension manifest to 9.0.5
E:\Software\10g\JDev10g\jdev\lib\ext\jheadstart\Bc4jPropertyEditor.jar!\META-INF\jdev-ext.xml
Converting JDeveloper 9.0.3 extension manifest to 9.0.5
E:\Software\10g\JDev10g\jdev\lib\ext\jheadstart\JASEditor.jar!\META-INF\jdev-ext.xml
Converting JDeveloper 9.0.3 extension manifest to 9.0.5
So I try to test one of my old application with this configuration. After Jdeveloper migrated my workspace and projects and business componenet
to the newer version, I run the application generator. It worked fine without any problem but after running the application, I got an error page showing
that my bc4j.xcfg is not in the path.
On the other hand, I found out that when I wanted to view my UIX pages, 2 dialog boxes appeared. The first one asked to upgrade
to UIX 2.2's new expression language syntax and the other which is on the top of the first one, showing that UIX runtime failed to render the page
with following detail :
javax.servlet.ServletException: No page broker found!
     at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source)
     at oracle.cabo.servlet.UIXServlet.doGet(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at oracle.cuervo.share.servlet.PreviewServletContainer.handleRequest(PreviewServletContainer.java:305)
     at oracle.cuervo.share.servlet.PreviewServletContainer.handleRequest(PreviewServletContainer.java:229)
     at oracle.cabo.ide.addin.preview.UIXRenderThread._reallyLoad(UIXRenderThread.java:263)
     at oracle.cabo.ide.addin.preview.UIXRenderThread.runImpl(UIXRenderThread.java:203)
     at oracle.cabo.ide.addin.preview.BasePreviewThread.run(BasePreviewThread.java:79)
I think that I should have set some setting before use JHeadstart with JDeveloper.
Could anybody help me ?

Alex,
The document Sandra referred to applies to JDeveloper 10g preview (9.0.5.0). JHeadstart 9.0.4.5 will NOT work with JDeveloper 109 production (9.0.5.1).
We plan to release a new version end of april that is compatible with 9.0.5.1. See this thread for more info: JDeveloper 10g production, status JHeadstart?
Steven Davelaar,
JHeadstart Team.

Cannot create a Struts Form bean using jdeveloper 10g

Hello I'm new to jdeveloper and struts and triying to create a sample login page following this tutorial :http://www.oracle.com/technology/products/jdev/htdocs/handson/struts/strutshandson.html
But I have a little problem in the 3rd excercice (Building Struts Form Beans and Actions)
when I follow the instructions "Select File | New > Choose Web-Tier in the Categories, and select Struts > Select ActionForm from the Items > Click OK. "
there is no ActionForm Item ! the only available item is "Struts Controller page Flow" and I allready used this one to create the struts' project template !
(same thing : Struts Action in the next tutorial section is not available)
BTW : I have to use jdeveloper 9.0.5.2 and not a latest version

1. Take a look at the class diagram for query model http://docs.oracle.com/cd/E17904_01/web.1111/b31973/af_query.htm#BABDGCHI
2. Also see if this helps you understand http://jobinesh.blogspot.in/2011/03/retrieving-viewcriteria-from-custom.html

Incorrect stub generation using JDeveloper 10g (10.1.2.0.0)

Dear all,
I'm having some trouble with deserializing the WSDL hereunder:
http://213.182.157.216/CarRentalAgentService12/CarRentalAgentService.asmx?WSDL
If you look into this file, you'll see that there are two different schemas defined. When trying to generate the stub for it with with JDeveloper, it only creates the first schema's class (this is the only one with messages defined). The second disappears mysteriously... If I do the same using wsdl.exe from the MS VS .NET Framework, it creates the remaining classes without any problem. Anyone who has a clue in solving this (options for JDeveloper, updates, ... ?)

Hi Peter,
Unfortunately, there is no easy way to consume this WSDL using JDeveloper 10.1.2. Support for schema import is comming with the new 10.1.3 EA1 version, which is based on JAXRPC.
All the best,
Eric

How to use tree tables with CRUD operation for begineers ADF 11g

This is Friday night call for help.
This is only few sample ressources on the web for tree table and only one with CRUD operation.
I used this one http://jobinesh.blogspot.com/2010/05/crud-operations-on-tree-table.html because this is the only one that address CRUD.
And it is shaky. Deletion works fine but insertion not very well. This is working using custom code provided below.
Depending if the user selection in the tree, the code insert from the master node to the children node.
Any other options because it is not working well.
Also where Oracle describes how to use the row, rowset, itorator API? This is really hard to understand like almost if we should not use it.
then if not how can I insert in tree with two nodes and insert in the parent or children depending the users selection.
Lately I 'been posting questions on this forum with no response. This hurts. I understand developers cannot spend their time on this but People from Oracle, please help. We pay licenses...
public void createChildren(RowIterator ri, Key selectedNodeKey) {
final String deptViewDefName = "model.DepartmentsView";
final String empViewDefName = "model.EmployeesView";
if (ri != null && selectedNodeKey != null) {
Row last = ri.last();
Key lastRowKey = last.getKey();
// if the select row is not the last row in the row iterator...
Row[] found = ri.findByKey(selectedNodeKey, 1);
if (found != null && found.length == 1) {
Row foundRow = found[0];
String nodeDefname =
foundRow.getStructureDef().getDefFullName();
if (nodeDefname.equals(deptViewDefName)) {
RowSet parents =
(RowSet)foundRow.getAttribute("EmployeesView");
Row childrow = parents.createRow();
parents.insertRow(childrow);
} else {
RowSet parents =
(RowSet)foundRow.getAttribute("EmployeesView");
Row childrow = parents.createRow();
childrow.setAttribute("DepartmentId",
foundRow.getAttribute("DepartmentId"));
parents.insertRow(childrow);
} else {
System.out.println("Node not Found for " + selectedNodeKey);
}

I am looking for a sample that describe how to design a jsf page with a tree table.
So you have Department and employees. In the tree first comes Department and if you click the node you see the employees assigned to this department.
I need to be able to insert a new department or a new employee from the tree table by clicking on a insert button in the panel collection toolbar depending on user selection in the tree.
I got part of it working but not good enough.
By problem is the get insertion working
I have a createChildren method in my AM implementation that get in input a RowIterator and selected node key.
To goal is to create new records depending of the user selection and the input parameters get populated by the binding like this:
#{backing_treeSampleBean.selectedNodeRowIterator} #{backing_TreeSampleBean.selectedNodeRowkey} via method binding with parameters.
Is it the right approach?
First to be able to insert a parent record, I select nothing in the tree and ri and selectedNodeKey comes to null
we run this code
ViewObjectImpl vo = getSchHolidaySchedExceptionsView1();
//ViewObjectImpl vo = getDepartmentsView1();
Row foundRow = vo.first();
Row childrow = vo.createRow();
vo.insertRow(childrow);
A new blank entry appears in the parent node and we enter a value.
The the problem starts when we want to add a child to this parent.
We select the created parent and press the insert button, this code get executed
if (nodeDefname.equals(deptViewDefName))
//list of the children of the parent and create an new row
RowSet childRows = (RowSet)foundRow.getAttribute("SchHolidayExceptionDatesView");
Row childrow = childRows.createRow();
childRows.insertRow(childrow);
But the new entry does not appear, it is almost like it would be created for a different parent because this is a mandatory field that is not feel in yet and the interface complaints of a missing value. It is created somewhere just not a the right place... This is my guess.
Do you see something wrong with the code?
The full code og my create children method is there below
I am using jdeveloper 11.1.1.3.0 any issues with tree table to know about with this version?
Thanks for your help
public void createChildren(RowIterator ri, Key selectedNodeKey) {
final String deptViewDefName = "com.bcferries.app.pdfroutesched.model.SchHolidaySchedExceptionsView";
final String empViewDefName = "com.bcferries.app.pdfroutesched.model.SchHolidayExceptionDatesView";
if (ri != null && selectedNodeKey != null) {
// last row
Row last = ri.last();
Key lastRowKey = last.getKey();
// if the select row is not the last row in the row iterator...
Row[] found = ri.findByKey(selectedNodeKey, 1);
if (found != null && found.length == 1) {
// foundRow is the row selected
Row foundRow = found[0];
// The row selected can be the parent node or the child node
String nodeDefname = foundRow.getStructureDef().getDefFullName();
// if parent row
if (nodeDefname.equals(deptViewDefName))
//list of the children of the parent and create an new row
//works but we try to resolve the creation of a parent
RowSet childRows = (RowSet)foundRow.getAttribute("SchHolidayExceptionDatesView");
Row childrow = childRows.createRow();
//childrow.setAttribute("HolidayDate", new java.util.Date().getDate());
System.out.println("insert child row from master");
childRows.insertRow(childrow);
} else
//RowSet ParentRow = (RowSet)foundRow.getAttribute("SchHolidaySchedExceptionsView");
//RowSet childRows = (RowSet)ParentRow.first().getAttribute("SchHolidayExceptionDatesView");
Row childrow = ri.createRow();
System.out.println("insert child row from child ");
} else {
System.out.println("Node not Found for " + selectedNodeKey);
} else {
System.out.println(" param null try creating for first row : " +
ri + " * " + selectedNodeKey);
ViewObjectImpl vo = getSchHolidaySchedExceptionsView1();
Row foundRow = vo.first();
Row childrow = vo.createRow();
vo.insertRow(childrow);
}

How to use Jdeveloper 10g (10.1.3.4.0) or 11g to create J2ME apps?

Similar Messages

Maybe you are looking for