How to use loadContent of SpryHTMLPanel.js to view shift_jis html page correctly?

Hi all,
I had used loadContent function of SpryHTMLPanel.js to load a html page with shif_jis charset, but it dont work correctly, what dispayed are seem utf-8.
Any one help me!!!

I'm using the defaults in Flash CS3 ver9.
I'm not creating any action script myself.
I open Flash and select from the Flash menuio options...
"Create New Flash File (Action Script 3.0)"
I then File | Import my AVI video to convert it to an FLV video...
and choose the player options for controls, etc
and then punch through the menu's until Flash finally imports the video.
I then "Publish" the project to the the 4 files mentioned in my initial posting.
So, I think the answer to your question is...
Yes, I'm using the default Flash playback component to play the flv
and yes, I'm letting Flash default to CS3 even though I'm not writing the code... Flash is.
Thanks for the help.

Similar Messages

How to set a cookie in the browser from an html page called via an Iview

How to set a cookie in the browser from an html page called via an Iview
Hello all,
I have an issue which is causing problems. I have a snap survey (html form with submit and cookie setting) which is embedded in a url iview.
Although the submit and the form work fine, the portal will not allow the cookie to be set it seems.
Is there a way to allow cookies to be set from an embedded page in a url iview??
You will make my day if you know!
System: EP7 SP13
Kind regards
Alex

Hi,
Check this:
http://www.oracle.com/technology/products/ias/portal/html/same_cookie_domain_with_pdkv2.html
Cookie Basics
Web browsers have built in rules for receiving and sending cookies. When a browser makes a request to a web server and the web server returns cookies with the response, the browser will only accept a cookie if the domain associated with the cookie matches that of the original request. Similarly, when a browser makes a subsequent request, it will only send those cookies whose domain matches that of the target web server.
These rules are designed to ensure that information encoded in cookies is only "seen" by the web server(s) that the originator of the cookie intended. These rules also ensure that the cookie cannot be corrupted or imitated by another server. By default, the domain associated with a cookie exactly matches that of the server that created it. However, it is possible to modify the domain at the time the cookie is created. Relaxing the cookie domain increases the scope of the cookie's visibility making it available to a wider "audience" of web servers.
For example, if a cookie is created by a.us.oracle.com, it's domain will usually be set to a.us.oracle.com. This means that the browser will only send the cookie to a.us.oracle.com. It will never send it to any other servers. However, if at the time of creation, the domain of the cookie is set to .us.oracle.com, the browser will send the cookie to any server whose domain falls within .us.oracle.com. such as portal.us.oracle.com, provider.us.oracle.com, app.us.oracle.com etc
Regards,
Praveen Gudapati

How to use Microsoft Word's Find and Replace with HTML tags?

Hello to all!
I'm trying to figure out how to use the find and replace function in Word to replace html tags. I'd like to be able to change something like this:
random text
To something like this:
random text
I want to replace the open and close tags without changing or interfering with the text between the tags. I'm pretty sure I should use wildcards, but I can't figure out how to use them properly.
Anyone able to lend a hand?

Here is my latest regular expression with Perl. I think it matches the spirit of the request in the original post.
Note, this isn't as easy as you think. You need to code up the complete set of html rules in you implementation. You need to allow for a certain amount of mal-formed html.
perl -0660pe 's^<[sS][pP][aA][nN]\s+class="B01-K-ITAL"\s*>(.*?)</[sS][pP][aA][nN]>^$1^gs' i.html >|o.html
input text
<html> <head>...</head> <body>I'd like to be able to change something like this: #1 one line I want to replace the open and close tags without changing or interfering with the text between the tags. I'm pretty sure I should use wildcards, but I can't figure out how to use them properly. note, this isn't as easy as you think. You need to code up the complete set of html rules in you implementation. You need to allow for a certain amount of mal-formed html. #2 don't be greedy $3 multiline text #4 multiline tag. I believe html allow a carriage return in white space of tags #5 split after the class tag. optional white space #6 mixed case tag no text #7   This browser is IE. This browser is not IE.</body> </html>
output text
<html> <head>...</head> <body>I'd like to be able to change something like this: #1 one line I want to replace the open and close tags without changing or interfering with the text between the tags. I'm pretty sure I should use wildcards, but I can't figure out how to use them properly. note, this isn't as easy as you think. You need to code up the complete set of html rules in you implementation. You need to allow for a certain amount of mal-formed html. #2 don't be greedy $3 multiline text #4 multiline tag. I believe html allow a carriage return in white space of tags #5 split after the class tag. optional white space #6 mixed case tag no text #7   This browser is IE. This browser is not IE.</body> </html>

How to set a value to an existing element in html page using servlets

i have created a session in my login page and i know how to retrieve it now the actual problem is i want to set the same value to a textbox in an html page........

Use JSTL and/or EL.
Assuming that you mean with "created a session" that you've created a bean and have set it as an attribute of the HttpSession, e.g.httpSession.setAttribute("someBean", someBean);then do for example using the JSTL c:out tag:<c:out value="${someBean.someProperty}" />or, if you're using at least Servlet 2.4 API with JSP 2.0 API which allows EL in template text, then do for example:${someBean.someProperty}

HOW TO: using custom fonts in native storyboard views from an ANE on iOS

Hey,
In our apps, we have embedded storyboards into an ANE, and successfully used those screens in an AIR app, and figured out how to use custom fonts in those views.
I wrote a quick blog post about it and just thought I'd share it real quick in case it helps someone.
ANE for iOS with Custom Framework – Using Custom Fonts | khef.co

Hi WayHsieh,
>>can I just "install" fonts through Word App? Does Word Apps have enough privilege to install fonts on Windows? Can I just click a button in Word App, and then it will install fonts automatically?<<
Based on my understanding, it is hard to achieve the goal. Because the app webpage is hosted inside an Internet Explorer control which, in turn, is hosted inside an app runtime process that provides security and performance isolation and it is under
low-Integrity level.
Here is the figure for apps for Office runtime environment in Windows-based desktop and tablet clients:
You can get more detail about Privacy and security from links below:
Privacy and security for apps for Office
Hope it is helpful.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to change the file name of pdf file in html page?

Hi,
Actually my requirement is to upload 50 PDF files containing javascript in each file into flex page with the help of one html page.
i did the the javascript part by using batch processing.
now i want to call those pdf files one after another without changing the file name in html page
the code written in html page is
<html>
 <body>
 <object id="PDFObj"
 data="http:\\localhost\pdf\20090807 - Batch 630.pdf"
 type="application/pdf"
 width="100%"
 height="100%">
 </object>
 </body>
</html>
So every time i have to change that file name to acess another file.
Is there is any other way to sort this problem????
Plz anyone help me to sort out this problem with some code or some example.

I once had a similar task for creating a webpage that I only use on my computer--a webpage that accesses PDF's and SWF's font previews from a list of fonts as "a href's". What you must do is utilize the power of the command line, whether on a Mac on a PC or on Linux, Linux being the most powerful (although Mac IS Unix). You must utilize variables, variable replacement, and then a command to print out the results of a "for" or "while" loop to a text file which will be your HTML file with each individual link automatically built into the HTML code. You will have a list of 50 links. If you are simply looking for a GOOGLE type functionality where you click on "Next" and "Previous" you will have to dig deeper into variable replacement--this I don't know how to do yet but there are books for command-line shell interpreters. One shell interpreter is called "bash" (born-again shell) and there is a book on the market which gives a detailed example of how to replace variables in a shell script. Again, I don't know how it works. I will try to learn this at a later time when I am more seasoned with the basics of shell scripting.

How to Unload and Reload a Composition into the same HTML page?

TLDR:
When loading multiple Compositions into a html page via AdobeEdge JavaScript, how do I remove/delete/unload a loaded composition so that it can be added/loaded to the same page again later? I am open to options not mentioned here, but this is done externally, not within Edge's limited code abilities (working with multiple comps on one page).
*Note: I am making comps in Edge then loading multiple within my own JavaScript/HTML external pages. This programming is NOT done within Edge's code.
Overview:
I could have more than 50 compositions to load into my page, but only one is displayed at a time. In order to make this easier on the user, I load 5 into the page in divs with display: none. I set the id of the first one to an id that has my css to show the content properly. When clicking next, that div is set back to an ID that has hidden css values. Going forward and back works the same. This functions properly. This puts all the obvious preloading in the beginning so the user doesn't have to wait again, as comps are preloaded in the background while they are viewing other comps.
As the user moves farther, I drop the first div and add one on the end with the next comp. This works fine. I can go forward all day, no problem by removing the first div element and adding one to the end. This should make memory not horrible, since theoretically, the comps would be removed as needed...
Problem:
The problem is if the user wants to go back. If I drop the last div and add one to the front, the comp (which was loaded and dismissed earlier) cannot be re-loaded. It also cannot be re-added, even if the div is cloned and re-added later.
This is the code I am using to load the comps:
$.getScript('comp_' + i + '_edgePreload.js', function() {});
Options:
The options I have thought of (and not found a way to make them work) in order of preference:
Fully unload the comp from memory, that way when I make the call to load the comp, it will act as if it has never been loaded before. (Is there a way to unload a comp completely? I haven't found one, but the API is sorely incomplete) **I want this one to work very much.
Ok, maybe you can't actually unload a loaded comp. Can you re-add it to a new div? I have printed out every option I could thru AdobeEdge's interface, and cannot find a way to re-make a div the way it was. Heck, I'd be happy to load the content into a non-child element in JS, then append to html when I actually want to display it. I can't find how to re-setup the div, which has the correct Class and is set up the way it was when the comp was loaded the first time. (this option is bad because it seems all of the comps are still in memory, but at least it would work)
Worst case, I have tried this and ALMOST got it to work. When I removed the old divs from the page, I cloned them and added them to an array of objects in JS. Then, when going back, I pushed them back out, so it was an EXACT copy of the original div, all content was the same, all id, class, style, etc was the same. Unfortunately, AdobeEdge seemed to lose the ability to talk to it. (AdobeEdge.getComposition('EDGE-MyUniqueIdentifier').getStage(); // returns undefined). How do I tell it to re-associate the div with the object that still exists here? And obviously, this is an awful solution, since it appears that all of the comps stay in memory, but I was desperate to simply make it work somehow.
If you need code examples of any of my attempts at the previous options (I have tried them all extensively, and unsuccessfully), I can provide it. I hope someone has found a way to deal with this or has links to actually useful information. Most posts I have found simply tell you to load all your comps and hide/unhide them as needed. This works for small-scale, but when you have a lot of comps to move between, it becomes less of a viable solution.

Exactly the same problem here. Could anyone from EDGE TEAM answer to this question?
How we can UNLOAD and LOAD same or another animation using SAME or DIFFERENT dinamically created DIVS?
Affter loading the second animation AdobeEdge.getComposition('EDGE-MyUniqueIdentifier').getStage() returns undefined.
Thanks for ther support.

How to embed a Video stored in KM repository on html page

Hi All,
I have a requirement to embed a video stored in KM repository on html page.
My html page and related file referred in html code below (highlighted) are stored at following path in KM root>documents>test with the same name as mentioned in code.
Code which I got from net for embedding an .flv file on html is mentioned below but how should I modify it to take files stored in KM.
<html>
<head>
<title>Flash Test</title>
</head>
<body>
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="Jacksonville" name="movie" width="425" height="305" align="center" id="movie">
 <param name="allowScriptAccess" value="sameDomain" >
 <param name="movie" value="player.swf?file=Radvan_001MEDWHI.flv" >
 <param name="menu" value="false" >
 <param name="quality" value="high" >
 <param name="scale" value="noborder" >
 <param name="salign" value="lt" >
 <param name="wmode" value="transparent" >
 <param name="bgcolor" value="#000000" >
 <embed src="player.swf" menu="false" quality="high" scale="noborder" salign="lt" wmode="transparent" bgcolor="#000000" width="425" height="305" swliveconnect=true id="movie" name="movie" align="left" allowscriptaccess="sameDomain" type="application/x-shockwave-flash" pluginspage="install_flash_player_active_x.msi" >
 </object>
</body>
</html>
Please guide me for the same.
Regards,
Madhvika

Hi,
I have stored all the files referred in code ( player.swf, install_flash_player_active_x.msi and Radvan_001MEDWHI.flv ) at root>documents >test folder in KM repository
Julian
My requirement is to know, what path i should give for the files highlighted with bold in my code as they are stored in KM .

Praveen
Can you please tell me how should I modify these lines in code (name of video file is Radvan_001MEDWHI.flv)
<param name="movie" value="player.swf?file=Radvan_001MEDWHI.flv" >
embed src="player.swf"
pluginspage="install_flash_player_active_x.msi" >
Regards,
Madhvika

How to insert a Jquery slideshow to a template based html page?

I would like to insert a simple jquery slideshow into an existing div in an html page which is linked to a template page. Do I add the js files and code to the template html or the child html where I want the slideshow? Do I need to divorce the page from the template? It seems that the js has to be put into the head from what I've read so far and this is not editable in a template child...
lunairecollective.com/news.html is the page I wish to alter, currently there are very simple links with swap text of container. I would like to have a cyclic slideshow in the div to replace the current swap images and links.
The website is in html4 transitional, and I'm using Dreamweaver cc
Thanks for any help!

Yes, there are editable areas in the child page as you saw from the website address. And I can see there are some editable elements in the head, though not all of it. Could you show me where I should insert the javascript code for a jQuery slideshow please? The relevant code follows:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">

<meta name="description" content="The most recent review of Lunaire Collective printed in The Australian newspaper.">
<meta name="keywords" content="review, The Australian, Whistler, Tom Green, Birtwistle secret theatre">
<title>LUNAIRE COLLECTIVE: Reviews and photos of Lunaire Collective - News and Reviews</title>

<link href="desktop.css" rel="stylesheet" type="text/css">
<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>

<script type="text/javascript">
function MM_setTextOfLayer(objId,x,newText) { //v9.0
with (document) if (getElementById && ((obj=getElementById(objId))!=null))
with (obj) innerHTML = unescape(newText);
</script>

How do I - change the background colour of the output HTML page

Captivate 5
I am publishing my project to html, but wish to change the background colour of the html page to match the projects colour scheme.
I can find no option in Captivate to do this, and it is always output as white = <body bgcolor="#f5f4f1">
I change the colours used within captivate and change the html colour of the borders, or the captivate project background, but this does not effect the html page when published.
Is this possible?
At present I am having to manual amend the html to the colour of my choice.

Hi there
Can you post a screen grab of what you are seeing? The instructions Orange_Sean provided should have done the trick for you. Even though you aren't using Borders, it still should have changed the HTML background color. Unless we have unearthed a bug or something.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

How to display everything inside a canvas on a new HTML page

Hi, im trying to display images, words and everything inside a canvas on a new HTML page. By a click of a button, a new window with HTML page will pop up display the canvas. Can anyone help me?

Apps and other media from iTunes can only be used with the account they were bought with.

How to extract image from oracle database and display at html page

Could you help me how to make the image to display. i manage to extract the data but the data is in Blob so i need to convert it so make it display at html page.

Thanks for ur reply Mr.Rajasekhar
I tried as u said,
i tried without converting to sql date ,but still i din't get any results
java.text.SimpleDateFormat dateFormat=new java.text.SimpleDateFormat("dd/MM/yyyy");
 java.util.Date fromDate=dateFormat.parse(startDate);
 java.util.Date tillDate=dateFormat.parse(endDate);
 String query1="select MTName,Date,MTLineCount from linecountdetails where mtname='"+MTName+"' and Date >='"+fromDate+"' and Date <='"+tillDate+"' " ;
 System.out.println(query1);
//From main method
databaseConnection("prasu","1/12/2005","31/12/2005");I got the output as
---------- java ----------
select MTName,Date,MTLineCount from linecountdetails where mtname='prasu' and Date >='Thu Dec 01 00:00:00 GMT+05:30 2005' and Date <='Sat Dec 31 00:00:00 GMT+05:30 2005'
java.lang.NullPointerException
null
null
java.lang.NullPointerException
Output completed (4 sec consumed) - Normal TerminationThanks
Prasanna.B

How to: using the Place command in an action and remember the correct source filename...

I have a large set of product, architecture, and other subject-specific photos, that I’m preparing for a new website; all to be placed in various galleries.
For each photo, I want it to have the same background. If I were doing this manually, I would simply “place” the subject photo into the background, and save it – back to the original photo name.
In other words, doing this manually, PRODUCT_001.TIF gets placed into STANDARD_BKGRND.TIF, (thereby automatically correctly sizing and centering it), and then saving the result back to PRODUCT_001.TIF; either overwriting the original, or into a new folder. (I have the original file somewhere else, and am working with an intermediate copy).
But since I have several hundred photos, how do I create an action (and really – a droplet) that will save the resulting file to the desired name? Typically placing photo ‘PRODUCT_001’ into photo ‘B’, alters photo ‘STANDARD_BKGRND’, so I can’t save the result back to ‘PRODUCT_001’. Said differently, in a droplet, each time it's run saves the result back to the same filename 'STANDARD_BKGRND'.
The end result – I want to apply that droplet to all the PRODUCT_***.TIF files in a given folder, and end up with the same file names as before.
Thanks in advance for your help!
Jerry
PS - I have no scripting experience in PS, but have written code in other applications/scenarios.

Its great that your products are cutouts layers, Its easy to put cutouts on backgrounds and even add layer style to the product layer to enhance the composite. Still cutouts have size and resolution as do your background images.
When you make composites. A document that is place in or pasted into the current document will be resample to match the current documents DPI resolution to preserve the size of the document being place or pasted in size.
Additionally if your using place if the document being placed in does not fit within the current document's canvas size. Photoshop may scale the image to fit within the canvas. It depends on your user id Photoshop Preference setting.
That means you need you handle the sizes involved.
I would think that you would want the final composite to be the size of the background image.
You need to know its size and dpi resolution. You must use image size on your product image and make the image have the same dpi resolution and a size smaller then the background image. Perhas they have the same dip resolution as the background and are smaller in size. If that the cast their size are good no image resize is required,
Then you need to use canvas size to make the document have the same size and resolution as the background image.
You may want to center the product layer over the canvas however Canvas size will add canvas evenly around the produt layer's layer bounds when you leave the anchor point in the center.
When you then place in the background image it will not be resampled for it has the same dpi resolution as the current document and it will not be scaled for it is an exact canvas size fit. All that remains to be done is move the current placed layer below the product layer
The document name is the product image file name opened by you or by Photoshop automate batch process.

How to use Sunray without VDI or VMware View Manager

There is no VDI or VMware View Manager in my test environment. Only srss 4.2 and srwc 2.2 has been installed.
Now i have 5 sunray client and 5 Windows XP VM. How can I let every user use their Windows XP VM in this environment and can enable USB redirection?
In page http://wikis.sun.com/display/SRWC2dot2/Managing+USB+Device+Redirection+%28All+Topics%29
Supported Configurations
Configuration
SRS 5 (SRSS 4.2, SRWC 2.2) and Sun Ray Connector Kiosk Session
Description
Supports connection to Windows desktop using the Kiosk session.
My question is How to let mutipl-user use it in this config
The following is my settings and all users now can use their own Windows XP but USB redirection cannot work
Select Common Desktop Environment (Obsolete) in Kiosk mode add an application:
cam_script.windows_connector,
#!/bin/ksh
# Script to map smartcard token to individual VM using either
# the "User Name" or "Other Info" field of the output from
# utuser -p <token>
# Look at output from utuser -p ${SUN_SUNRAY_TOKEN} and grab hostname
# % utuser -p user.1140788210-7053
# Current Properties:
# User Name = tester5
# Other Info = host
# Server Name = localhost
# Server Port = 7007
# Logical Token = user.1140788210-7053
# User Created = 02/24/2006 13:36:50
# Token Enabled?
# Payflex.500af8ad00130100 Yes
# Currently Logged In:
# Current Desktop = 0003bad7566e
# Desktop Location =
# Logged In Since = 02/24/2006 13:36:58
# Use "User Name" field as hostname of VM to connect to
#VMHOST=`/opt/SUNWut/sbin/utuser -p ${SUN_SUNRAY_TOKEN} | /usr/bin/grep "User Name" | awk '{ print $4 }'`
# Use "Other Info" field as hostname of VM to connect to
#VMHOST=`/opt/SUNWut/sbin/utuser -p ${SUN_SUNRAY_TOKEN} | /usr/bin/grep "Other Info" | awk '{ print $4 }'`
WinHOST=`/opt/SUNWut/sbin/utuser -p ${SUN_SUNRAY_TOKEN} | /usr/bin/grep "Other Info" | awk '{ print $4 }'`
# Could probably do a ping test here and pop up dialogue
# about getting support to check the availability of the
# machine (might event be able to use VC API to power up VM?)
# if it doesn't respond to ping. Could use something like
# dterror.ds, could also pop up different dialogue
# if VMHOST is not set
COLOUR_DEPTH=16
# If using 24bit need registry change under Windows XP
#COLOUR_DEPTH=24
# Fix F11 and F12
#/usr/openwin/bin/xmodmap -e 'keycode 75 = F11'
#/usr/openwin/bin/xmodmap -e 'keycode 76 = F12'
# Fix alt & print screen
#/usr/openwin/bin/xmodmap -e 'keycode 77 = 0xff62'
# Turn on numlock
/usr/openwin/bin/xset led 1
if [ "${WinHOST}" = "" ]; then
 #dterror.ds "Your Windows Machine can not be determined.\n\nPlease contact support and ask for smartcard \n\n${SUN_SUNRAY_TOKEN}\n\nto be associated to a Windows Machine" "Smartcard not configured" "ERROR"
 WinHOST="Windows_default"
fi
# Run Windows Connector in full screen mode at appropriate colour depth with sound redirection
# Disable the windows pulldown header in full-screen mode
# RDP Window Attributes options to disable are:
# -D wallpaper
# -D fullwindowdrag
# -D menuanimations
# -D theming
# -D cursorshadow
# -D cursorsettings
/opt/SUNWuttsc/bin/uttsc -mb -A ${COLOUR_DEPTH} -r sound:high -u "" ${WinHOST}
#if [ "$?" = "0" ]; then
# dterror.ds "Logging Out..." "Log Out" "OK"
#else
# dterror.ds "Your Windows Machine ${VMHOST} is not visible on the network.\n\nIf you have just restarted it please wait a minute and try again\nIf you still have problems get help" "Windows VM is not available" "OK"
#fi
# End of CAM script
Then add IP address in other information of Token.

Meta Kiosk would certainly do what you need and the USB pass through works.
http://blogs.sun.com/danielc/entry/meta_kiosk_how_to_run
I think the problem you are running into is that you are using uttsc inside a Solaris environment as an app, looks like CDE, which isn't being supported to my knowledge to avoid conflicts between the two desktops. It is designed to work out of the box with SRWC kiosk mode.
The undocumented way to turn it on is to turn usb on by adding -r USB:on as an argument.

How to use dynamic action to fill multi item on a page ?

Hi..
I want to fill multi items on a page so I build a dynamic action ( Execute PL/SQL Code ) to do it .The problem is that when the page loads I can't see any data and I tried to see the session values using debug and I found data. Moreover when I save the row I got these data saved.
So what is the magic there?
Thanks

Firstly, to get the multi-select populated with "pre-selected" values the easiest approach is to use Computation or Process at a process point On Load Before Header or After Header or Before Regions.
All you need to do is populate your "Select List " page Item with : (colon) separated list of selected values. E.g is you want A,B and C out of A,B,C,D,E selected then get A:B:C into the Page Item.
If you have used Dynamic Actions, what is your event on which the action fires? For Dynamic-Actions the page (HTML DOM) needs to be existing , so it must fire after the page has loaded.
Regards,

How to use loadContent of SpryHTMLPanel.js to view shift_jis html page correctly?

Similar Messages

Maybe you are looking for