How to use loop in VBAK table using BDC RFC connection through excel vba ?

Hello,
I am trying to extract data from VBAK table using rfc connection with Excel VBA. where i can able to pull data first time, when i tried to use the same set of code using loops, it throws an error like BAD INDEX.
Any help appreciated.

Similar Messages

How to select data from a table using a date field in the where condition?

How to select data from a table using a date field in the where condition?
For eg:
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = '31129999'.
thanks.

Hi Ramesh,
Specify the date format as YYYYMMDD in where condition.
Dates are internally stored in SAP as YYYYMMDD only.
Change your date format in WHERE condition as follows.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = <b>'99991231'.</b>
I doubt check your data base table EQUK on this date for the existince of data.
Otherwise, just change the conidition on BDATU like below to see all entries prior to this date.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and <b> bdatu <= '99991231'.</b>
Thanks,
Vinay
Thanks,
Vinay

How to find the columns and tables used in a stored procedure?

Hi,
Can someone suggest how to find the columns and tables used within a stored procedure?
Thanks
VBK

For example:
SQL> create or replace
2    procedure p1
3      is
4          cnt number;
5      begin
6          select count(*) into cnt from emp;
7 end;
8 /
Procedure created.
SQL> select referenced_owner,
2          referenced_name
3    from dba_dependencies
4    where owner = 'SCOTT'
5      and name = 'P1'
6      and referenced_type = 'TABLE'
7 /
REFERENCED_OWNER               REFERENCED_NAME
SCOTT                          EMP
SQL> SY.

How to find max(time) from table using group by

how to find max(time) from table using group by
select var max(time)
          from table
          into (var1, time1)
           where .....
             group by var.
it is fetching record which is top in table.
if u can help?
regards.

No this will fetch the maximum time from teh table.
select var max(time)
from table xxxx
into (var1, time1)
where .....
group by var.
Refer this code
TABLES SBOOK.
DATA: COUNT TYPE I, SUM TYPE P DECIMALS 2, AVG TYPE F.
DATA: CONNID LIKE SBOOK-CONNID.
SELECT CONNID COUNT( * ) SUM( LUGGWEIGHT ) AVG( LUGGWEIGHT )
       INTO (CONNID, COUNT, SUM, AVG)
       FROM SBOOK
       WHERE
         CARRID   = 'LH '      AND
         FLDATE   = '19950228'
       GROUP BY CONNID.
WRITE: / CONNID, COUNT, SUM, AVG.
ENDSELECT.

How we can loop the screen table.

Hi All,
We are used loop the screen table but it is a structure how we are able to do this what sap doing behind this can any body please tell me.
Thanks,
Saleem.

Hi
SCREEN is a structure only.
But when you create a screen or selection-screen; the program which controls your screen or selection-screen creates an internal table with header line of type SCREEN.
So in your program SCREEN is an internal table, you can always loop it.
To understand it better, write some parameters and select-options in a report program; in debugging mode see the details of SCREEN table.
Regards
Surya.

How to select multiple row of table using check box?

hi,
         i am having table on view having first field as checkbox. what i want, when i click on checkboxes in multiple rows, and i click on any button i need to use those content to next view...
          my problem is if i select only one row , i can use onlead select property of table..but when i select multiple rows through check box how should i read contents of table....?
Plz solve it.
Thanks,
Saurin Shah

Hello Saurin,
You are right using LeadSelection you can select only 1 row at a time. You will have to make use of Selection for achieving this. First you will have to change the selection mode of the table to multiple & also change the selection property for the related context to 0..n . Please find a code extract which might help you. (However this facility is only available from SP 14.) The main part is using the set_selected method of if_wd_context_node.
data: node_zcourse_details type ref to if_wd_context_node,
         node_course_assign type ref to if_wd_context_node,
         elem_course_assign type ref to if_wd_context_element,
         stru_course_assign type if_v_details=>element_course_assign ,
         item_popin_selected like stru_course_assign-popin_selected.
"     navigate from <CONTEXT> to <ZCOURSE_DETAILS> via lead selection
node_zcourse_details = wd_context->get_child_node( name = if_v_details=>wdctx_zcourse_details ).
"     navigate from <ZCOURSE_DETAILS> to <COURSE_ASSIGN> via lead selection
node_course_assign = node_zcourse_details->get_child_node( name = if_v_details=>wdctx_course_assign ).
"     @TODO handle not set lead selection
if ( node_course_assign is initial ).
exit.
endif.
data elem_set type wdr_context_element_set.
field-symbols <wa_elem> like line of elem_set.
elem_set = node_course_assign->get_elements( ).
loop at elem_set assigning <wa_elem>.
   <wa_elem>->set_selected( TRUE OR FALSE ). " Supply either TRUE/FALSE in here
endloop.

How to access records of a table using index?

Hi,
I am having two subforms. Now i want to fill these 2 subforms using data from a table in dataview based on some condition by looping through this table data. Is this possible using javascript? If possible please let me know.
Thanks & Regards,
Mahidhar.

Hi muralikrishna kaipha,
I can't believe this.
TOP-OF PAGE page is triggered before the first line is written to a page. That means TOP-OF PAGE is triggered by first write statement in program. INITIALIZATION is normally not used to write anything.
You must avoid to write more than one page during TOP-OF PAGE event because this will trigger TOP-OF PAGE recursively endless.
Think about it.
Regards,
Clemens

How to load data into user tables using DIAPIs?

Hi,
I have created an user table using UserTablesMD object.
But I don't have know how to load data into this user table. I guess I have to use UserTable object for that. But I still don't know how to put some data in particular column.
Can somebody please help me with this?
I would appreciate if somebody can share their code in this regard.
Thank you,
Sudha

You can try this code:
Dim lRetCode As Long
Dim userTable As SAPbobsCOM.UserTable
userTable = pCompany.UserTables.Item("My_Table")
'First row in the @My_Table table
userTable.Code = "A1"
userTable.Name = "A.1"
userTable.UserFields.Fields.Item("U_1stF").Value = "First row value"
userTable.Add()
'Second row in the @My_Table table
userTable.Code = "A2"
userTable.Name = "A.2"
userTable.UserFields.Fields.Item("U_1stF").Value = "Second row value"
userTable.Add()
This way I have added 2 lines in my table.
Hope it helps
Trinidad.

How to justify the values in table using report generation tool kit

Hi
How can we align the values in excel table using report generation toolkit.
like left,right,center.
Regards,
hari
Attachments:
Report_excel.vi ‏34 KB
New Bitmap Image.JPG ‏134 KB

Hi,
A trigger is designed to be a part of a transaction, not it's end.
It is like following these steps (not really accurate, but should give an idea):
1. programA issues INSERT statement on tableA
2. 'control' goes over to the database
3. constraint checks happen
4. the associated triggers on tableA do their work (e.g. fetching a sequence value for a primary key)
5. 'control' goes back to programA
6. programA decides if a commit (no error occurred) or a rollback (error case) has to be issued.
Did this help? Probably not, I'm not happy with what I wrote, but anyway... :)

How to Select Data from different Tables Using Linq

Hi,
I have two different tables, I just want to collect data from tables using Linq to SQL Queries.
The tables looks like This
ID Name ImageUrl
Other Table is
ID EmpID CheckInTime CheckOutTime
What I want to Collect data from CheckInTime and want to place it in a that is in a list view
Same thing I want to do it for CheckOutTime And One thing I want to tell is both tables are joined by a FK EmpID with ID.
What Are the suggestions for me
I have Used this code
var data = from emp in db.Employees
join chk in db.CheckInCheckOuts on emp.ID equals chk.EmpID
select new EmployeeCheckInOut
Name = emp.Name,
ImageUrl = emp.ImageUrl,
CheckIn = emp.CheckInCheckOuts,
CheckOut = emp.CheckInCheckOuts
Here the CheckInCheckOuts is another table, I don't how do I access fields of the Other table "CheckInCheckOuts"
Thank you
Ali

Mitja,
Kind of Tables, I don't Know but I can Tell you that these are Two table, first Table Have Data in It, Name, ImageUrl I have filled this table with names and ImageUrls And are string type.Other Table is for the CheckInTime And CheckOutTime of the employee.
What I need that when I click on the Image button it Should displays The Current Datetime into the label below the Image button.
So I have Problem accessing my CheckInCheckOut Table because I may not have Idea about.Did you understand what I need to do, if you have more question please ask to me.
Thanks
Ali

Impact Analysis: How to trace which objects and tables used in a report?

Impact Analysis: How to trace which Webi objects and tables used in a report?
Currently, our company have been using BO Webi as our ad-hoc and reporting tool for over a year now. Past several months, we've been pushing our power users to develop their own report, and started to notice that we loss track off which data (tables, columns, ... , BO objects) being used where and by whom. The BI team now spend more time tracing through reports manually, instead of designing Universe.
After consulted with our local SAP technical sale, they said the only solution is to buy BO's ETL (Data Integration) and
Metadata Management tool, which price starting from $300K per CPU. I suppose that is NOT the right solution; however, we have not found one yet. Some executives believe Cognos (now by IBM) would provide a better BI solution as we scale.
If anyone know, please provide (1) Impact Analysis method: How to trace which Webi objects and tables used in a report? and (2) Does Cognos provide better impact analysis method without a heavy spending?
Thank you very much,
Ed
Edited by: EdPC-SCB on Sep 8, 2009 3:56 PM

EdPC-SCB,
have you tried enabling auditing?
- Yes, audit log only shows user's activities which isn't useful for us. Please let us know any audit log that might be helpful .
For most of the servers listed in the CMC there is an "Audit" tab. I'd say if you have the disk space in your database for Auditor available, then if in doubt turn it on (at least for a while) to see if it exposes what you are seeking to find out --that'd be the quickest way. The documentation (xir2_bip_auditor_en.pdf) doesn't offer much in helping you to see a correlation between ticking on an Audit option in a Server and how it will populate in the Auditor DB -- most of us just hunt and peck until we get what we want. Once you have the good stuff in each of the Servers ticked on you'll be able to track down which report recieves which object. To help youself out initially, you should run every report that you can find so Auditor will get seeded.
thanks,
John

How to trace the data dictionary tables used in the standard transaction

Dear all,
Help me to trace the data dictionary tables used in the standard transaction "crm_dno_monitor". I need to find the tables where the data are stored.
or
Tell me generally how to find the tables used in the standard transaction.
Regards,
Prem

Hi,
Open the program of that standard transaction in object navigator or SE80..
Then click on the dictionary structures tab..
U can find the database tables used in this transaction..
\[removed by moderator\]
Regards,
Rakesh
Edited by: Jan Stallkamp on Jul 29, 2008 5:29 PM

How to find a cloumn or table used in all the reports

Hi ,
Suppose I have like 15 to 20 reports and i want search a particular column or table where it has been used in all the reports.Is there any easy way ?
Thanks,

Well "used in reports" can mean different things. Column used for display or columns used for filtering for example.
For a filter column you could literally search for
MyTable."Sales Rep"Whereas for a display column you'd need to search for
MyTable.&quot ;Sales Rep&quot ; (without the blank space after quot
That's simply due to how stuff gets stored in the webcat:
<saw:column formula="MyTable."Sales Rep"" columnID="c3">PS: How can you correctly escape the string &quot so it doesn't become " in here?

How to implement "delete" on a table using OWB?

Hi All,
How do I implement a simple delete using OWB?
Assumption:
(1) Table abcd (id number, age number, amt number)
(2) the_number is a variable
(3) the_id is a variable
Want to implement following transformation in OWB?
DELETE FROM ABCD WHERE AMT=0 AND number = the_number AND id = the_id ;
Rgds,
Deepak

We implemented delete mappings, and delete flows to be able to reverse a failed load. This is in my opinion a very sound and valid reason for deleting from a datawarehouse. Also if the need is there it could be used for deleting old superfluous data from the datawarehouse.
There are a few things to consider: closed records in type II should be opened up (post mapping).
Test, test, test.
It is indeed a bit tricky to realize,but certainly working and possible.
steps to take are following:
1) create new mapping
2) drop mapping table where to delete from onto mapping (2 times, 1 source, 1 target)
3) map all fields from source to their corresponding fields in target, except the ones that determine the "where" clause (Refered to as filter fields)
4) Either create a select, or a mapping input parameter which should result in generating the filter-values for your delete.
5) map above step to the filter fields.
6)define a delete mapping by altering target table properties as follows:
6a) Loading Type => Delete
6b) Match by constraint => No constraints
7) set properties each field as folows:
7a) filter fields match column when deleting => Yes
7b) other fields match column when deleting => No
Hope this helps,
Wilco

How to update more than one table using EO

Hi frnds,
Can someone provide me a doc/link which explain in detail how we can we update more than one PL/SQL tables using entity objects(on which VOs are based).
Till date I have been doing this using PL/SQL procedures but now my requirement is to achieve it thru EO.Someone suggested me use VL to achieve plz help
Thanks & Regards,

Hi,
That would be very nice of you,plz send me the docs and also send me similar docs that would be beneficial for a beginner like me.
My id is [email protected]
Thnx for your time.

How to use loop in VBAK table using BDC RFC connection through excel vba ?

Similar Messages

Maybe you are looking for