How to use MS Access database in Flash CS4 using AS3

Hello everyone,
     I need help for how use the MS Access database in FlashCS4 and I want to save and retrive the data from the database and display in the Flash window.
Thanks with,
Viswa.

http://www.northcode.com/blog.php/2011/05/06/Using-ADO-Data-Sources-in-Flash-Projectors

Similar Messages

  • "Connection is closed" closed error while using MS Access database

    We are using MS Access database in our project. Recently the database was upgraded to 2000.
    After upgrading the database, I get the folowing error when getAutoCommit() is called on a connection -
    java.sql.SQLException: Connection is closed
         at sun.jdbc.odbc.JdbcOdbcConnection.validateConnection(Unknown Source)
         at sun.jdbc.odbc.JdbcOdbcConnection.getAutoCommit(Unknown Source)
    The connection is not closed explicity before getAutoCommit() is called, only the statement is closed.
    This error is sporadic and occurs under load scenario only (when a lot of connections are open). Once the error occurs, all the database calls fail then onwards. The error was not occuring before the database was upgraded.
    I suspect the jbdc-odbc driver. The driver might not be compatible with Access2000 database. Under load scenario, it might be closing connections automatically.
    Has anybody faced similar problem before? Where can I find the compatible jdbc-odbc driver? And how to ensure that it is jdbc-odbc driver problem only?
    The database verison - MS Access 2000
    Java version - 1.3.1_01

    can i just point out that there is no support for transactions in Access so I wonder why you are calling autoCommit methods at all...

  • How to reference MS Access database in ColdFusion MX 7 on 64-bit Windows

    I am migrating customers from:
    Windows 2000 Server (fully patched)
    Internet Information Services (IIS) 5
    ColdFusion 5
    to:
    Windows Server 2003 Standard x64 Edition (fully patched)
    Internet Information Services (IIS) 6 (running in 32-bit
    mode)
    ColdFusion MX 7 (7.0.2) Standard
    Unfortunately, some of these existing customers are still
    using Microsoft Access databases instead of SQL Server. Having all
    of these existing customers migrate to SQL Server is not yet
    practical. On the old Windows 2000 / ColdFusion 5 server, they are
    using OLE DB data sources to reference the MS Access databases
    using the "Microsoft.Jet.OLEDB.4.0" provider. None are configured
    to use ODBC drivers when referencing MS Access or SQL Server.
    I have yet to figure out how to get ColdFusion MX 7 to:
    - Create a data source that references MS Access databases on
    64-bit Windows.
    - Reference an existing MS Access data source created with
    the 32-bit version of the ODBC Data Source Manager on 64-bit
    Windows.
    A bit of background information regarding MS Access on 64-bit
    Windows:
    - At the time of this writing, Microsoft has not
    created/released 64-bit drivers for Microsoft Access and it's
    unlikely they ever will, for understandable reasons.
    - Contrary to seemingly popular belief, the Microsoft Jet 4.0
    Database Engine does exist on 64-bit Windows. See the following
    regarding version and file location information:
    How to obtain the latest service pack for the Microsoft Jet
    4.0 Database Engine
    http://support.microsoft.com/kb/239114
    - You CAN create MS Access based data sources within 64-bit
    Windows, but they have to be made using the 32-bit version of "ODBC
    Data Source Manager". I'm assuming these DSNs may only be used by
    32-bit applications, but I have not tested that theory.
    32-bit data sources:
    ODBC Data Source Manager:
    %SystemRoot%\SysWOW64\odbcad32.exe
    Registry location:
    HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ODBC
    Default file DSN directory:
    C:\Program Files (x86)\Common Files\ODBC\Data Sources
    64-bit data sources:
    ODBC Data Source Manager:
    %SystemRoot%\system32\odbcad32.exe
    Registry location:
    HKEY_LOCAL_MACHINE\SOFTWARE\ODBC
    Default file DSN directory:
    C:\Program Files\Common Files\ODBC\Data Sources
    The 64-bit version of "ODBC Data Source Manager" (under
    Administrative Tools) only show "SQL Server" and/or "SQL Native
    Client" as options when creating new data sources, unless
    third-party software is installed that supplies additional drivers.
    The 32-bit version of "ODBC Data Source Manager" (by default,
    there is no shortcut for this in the Start menu) shows the typical
    drivers seen on 32-bit versions of Windows, including SQL Server,
    SQL Native Client, Microsoft Access, Excel, FoxPro, Paradox, etc.
    When using ColdFusion Administrator in ColdFusion MX 7.0.2 in
    64-bit Windows 2003 (IIS is running in 32-bit mode to allow
    ColdFusion MX 7 to function at all), two problems are encountered
    when dealing with MS Access (and presumably other 32-bit drivers).
    In both cases, ColdFusion is trying to reference the registry
    location for 64-bit data sources instead of 32-bit:
    1. Creating a new data source within ColdFusion
    Administrator:
    Data Source Name: whatever
    Driver: Microsoft Access
    CF Data Source Name: whatever
    Database file: (physical path to whatever.mdb)
    (other settings are irrelvant for this example)
    Error generated when submitting:
    Unable to update the NT registry.
    Cannot open HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC.INI\ODBC
    Data Sources: Windows error number 5 occurred.Access is denied.
    ColdFusion stores the data source, however a "verify"
    generates the following error:
    Connection verification failed for data source: whatever
    java.sql.SQLException: [Macromedia][SequeLink JDBC
    Driver][ODBC Socket]internal error: Data source name not found and
    no default driver specified
    The root cause was that: java.sql.SQLException:
    [Macromedia][SequeLink JDBC Driver][ODBC Socket]internal error:
    Data source name not found and no default driver specified
    2. Creating the data source using the 32-bit version of "ODBC
    Data Source Manager" then trying to reference it with ColdFusion:
    ODBC Data Source Manager:
    System DSN or File DSN:
    Name: whatever
    Driver: Microsoft Access Driver (.mdb)
    Database: (physical path to whatever.mdb)
    (creation is successful within ODBC Data Source Manager)
    Reference the above DSN within ColdFusion Administrator:
    Data Source Name: whatever
    Driver: ODBC Socket
    Error generated when submitting:
    Error accessing available odbc datasources. - Cannot open
    HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC.INI\ODBC Data Sources:
    Windows error 2 occurred.The system cannot find the file specified.
    ColdFusion MX 7 can't find the 32-bit data source on 64-bit
    Windows because it's looking for it in the wrong registry location.
    Can ColdFusion MX 7 be configured to look in
    HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ODBC
    instead of
    HKEY_LOCAL_MACHINE\SOFTWARE\ODBC
    on a 64-bit Windows machine?

    Paul,
    Thanks for the insight on this. Regarding the initial problem
    I ran into with creating Access based DSNs, very early-on, I
    noticed there were two different driver options for Access
    displayed within ColdFusion MX 7 Administrator:
    Microsoft Access
    Microsoft Access with Unicode
    For reasons I'm am still baffled over, I somehow completely
    forgot about and through the wonders of apparent tunnel vision,
    completely overlooked the "Microsoft Access with Unicode" driver
    option when I was running through my tests.
    At your seemingly-obvious suggestion, I created a data source
    using the Microsoft Access with Unicode driver and it worked
    perfectly fine with the one customer's web site I'm using for
    testing (of course, this is a copy--the production site is still
    housed on the old ColdFusion 5 server). This obviously doesn't
    actually fix the underlying issue with ColdFusion looking in the
    wrong part of the registry on 64-bit Windows, but at least when it
    comes to dealing with Access databases, your suggestion of using
    the Microsoft Access with Unicode driver appears to be a functional
    work-around. So long as there aren't any surprises waiting for me,
    hopefully this will also work for the remaining ColdFusion sites I
    have to migrate that are using Access databases.
    Since you mentioned JDBC drivers in comparison with ODBC, I'm
    pointing out a couple of references in case they're helpful to
    anyone following this thread:
    ColdFusion MX 7 - About JDBC
    http://livedocs.adobe.com/coldfusion/7/htmldocs/00001736.htm
    Types of JDBC technology drivers
    http://java.sun.com/products/jdbc/driverdesc.html
    http://java.sun.com/products/jdbc/
    I don't actually develop anything in ColdFusion, so I'm
    dealing with all of this from a server administration standpoint
    since we do have some domain hosting customers that do develop or
    at least have existing ColdFusion based sites. I am all
    too-familiar with the caveats of using Access in any kind of
    production or heavily used environment and have spent years keeping
    users away from ODBC. For ColdFusion users, that meant creating OLE
    DB DSNs and often having to fix poorly written SQL statements and
    fixing ColdFusion date-related values and boolean values (the
    common problems encountered when switching CF / MS Access users
    from ODBC to OLE DB). I can only recall running into problems with
    a single SQL Server based ColdFusion site when migrating from ODBC
    to OLE DB. That customer never did get their many coding problems
    fixed, so they're the only ones still using ODBC in CF. I have no
    idea what'll happen when that one site gets migrated over--if it'll
    even work. Obviously a lot of things have changed between
    ColdFusion 5 and the MX versions that have come along afterward.
    Thanks again for the Access with Unicode driver tip and JDBC
    info. It looks like I can finally start moving forward again with
    the site migration process.
    Josh

  • How can I link my database with flash?

    Hi…
    How can I link my database with flash to display image (to
    display it in master details page)
    Please your help ASAP.
    Regards,

    You could use some server-side scripting like PHP or ASP.
    http://www.kirupa.com/web/index.htm

  • I need to pass data from an Access database to Teststand by using the built in Data step types(open data

    base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1i need to pass data from an Access database to Teststand by using the built in Data step types(open database /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1
    When I tried the same thing on another cmputer the same thing
    happend
    appreiciate u"r help

    base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1Hello Kitty -
    Certainly it is unusual that you can still see the tables available in your MS Access database but cannot see the columns? I am assuming you are configuring an Open Statement step and are trying to use the ring-control to select columns from your table?
    Can you tell me more about the changes you made to your file when you 'changed' it with MS Access? What version of Access are you using? What happens if you try and manually type in an 'Open Statement Dialog's SQL string such as...
    "SELECT UUT_RESULT.TEST_SOCKET_INDEX, UUT_RESULT.UUT_STATUS, UUT_RESULT.START_DATE_TIME FROM UUT_RESULT"
    Is it able to find the columns even if it can't display them? I am worried that maybe you are using a version of MS Access that is too new for the version of TestSt
    and you are running. Has anything else changed aside from the file you are editing?
    Regards,
    -Elaine R.
    National Instruments
    http://www.ni.com/ask

  • How to setup the access privilege of flash file in Web Intelligence?

    How to setup the access privilege of flash file in Web Intelligence?   WEBI can set access privilege for single WEBI report file, but it seem cano not set access privilege for one flash file.

    Thank you Maksim,
    I did set the "selectionMode" to "Auto". I don't understand where In supply function I have to set lead selection of nested node to first element. Please elaborate on this. Are you talking about the context attribute bound to the second table? OR do I have to change the Importing parameters "Node" and "Parent_Element" of my supply function?
    Thanks for your time.

  • Use of Access database

    Hi,
    I want to write a application that uses an Access Database. Actually I want to write data to and read data from a Database with Labview. Does anyone knows a library to control a Access Database. Or any other solutions.
    Davy

    You've got several options. There is a shipping example that uses DDE to talk to an Access database. DDE sucks so you probably don't want to do that. There is ActiveX. There have been a lot of examples posted to the forum so you might want to do a search. ActiveX can be a real pain though. The nicest solution is to buy the Database Connectivity Toolkit from NI. It uses ADO/SQL to communicate to any database and hides a lot of complexity of learning SQL. There is also the free open source toolkit called LabSQL from Jeffrey Travis. This uses ADO/SQL to talk to any database. You'll need to learn SQL but that's not really that big a task.

  • How to import Ms Access database in Oracle 11g

    how to import Ms Access database in Oracle 11g

    google the subj. search terms reveals a tutorial ...
    http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/hol08/sqldev_migration/msaccess/migrate_microsoft_access_otn.htm

  • How to use embedded font (CFF) for Flash CS4?

    Hi,
    I am trying to embed "Arial Unicode MS" for use by TLF in my Flash CS4 project. As I googled around, I am using the "Flex SWC" approach, only not having any luck. Here is what I got:
    //Code in Flex ActionScript project:
    package
        public class FontEmbeds
            [Embed(source='C:/Windows/Fonts/ARIALUNI.TTF',
                    fontFamily='ArialUnicodeMS',
                    embedAsCFF='true'
            public const Font1:Class;
    When I am trying to instantiate this class, I have AS code in my Flash main timeline:
    var font:Font = new FontEmbeds_Font1();
    Flash compiler says: "1067: Implicit coercion of a value of type FontEmbeds_Font1 to an unrelated type flash.text:Font."
    Ok. Now after I changed it to:
    var font:FontEmbeds_Font1 = new FontEmbeds_Font1();
    Flash gives 3 errors:
    "VerifyError: Error #1014: Class mx.core::FontAsset could not be found.
    ReferenceError: Error #1065: Variable TextLayout is not defined.
    ReferenceError: Error #1065: Variable MainTimeline is not defined."
    I am assuming I have to create a Font1 object in order to use the embedded font. Is this assumption correct? As I've tried to use the "fontFamily" directly but Flash didn't seem to find the font at all:
    charFormat.fontFamily = "ArialUnicodeMS";
    Thanks.

    Hi Eric,
    Thanks for the info.
    I've tried to use the "fontFamily" directly but Flash didn't seem to  find the font at all:
    charFormat.fontFamily = "ArialUnicodeMS";
    In one fla where I used pure TFL, nothing gets rendered at all in the container Sprite. Flash doesn't throw any errors either. In another fla where I used a ComboBox, etc. along with TFL, it throws an error says it can't compile since "there is no ActionScript found" and I got a screen where all the Flash components were  flickering. After several attempts, Flash crashed.
    Also as a side note, the swc gets generated by Flash Builder Beta 2, at first it was 18mb and the second time I complied it become 9mb and stayed 9mb afterwards. Not sure if that's a concern.
    Geng

  • How do I activate colour management in Flash CS4?

    I am struggling to find clear guidance on how to switch on colour management in Flash CS4. My attempts to search online have tended to give me far too many irrelevent results and it is not even mentioned in the index of my 700 page Flash CS4 textbook.
    Some guidance would be appreciated.
    David

    I've found what appears to be an answer to my own question at the following link,
    http://www.adobe.com/devnet/flash/quickstart/color_correction_as3/
    The only problem is that it is an Actionscript 3.0 solution. Unfortunately, this is of limited use to me as most of my current Flash apps are image galleries purchased from activeden.net, all of which are written in AS2.
    Am I right in thinking that there is no way of mixing AS2 and AS3 code in the same FLA?
    David

  • How to connect my access database using applet?

    hi all,
    i need to connect my access database in my applet program which should work like an atm machine..I dont know how to connect it. Im new to applet same thing in JDBC application. Please help i terribly need it, our deadline in our case study is fast approaching and i still dont know how to do it. I tried the tutorial but i received some sql exception error. thanks!

    Try this link
    http://java.sun.com/docs/books/tutorial/jdbc/basics/

  • Tracking external programs used to access database

    I would like to track/audit the external programs our users are using to access our Oracle databases over a period of time. Hoping to track users hitting database with SPSS, MSAccess, etc for a report requested by our mgmt.
    I find "program" and "module" in the v$_session table but don't see similar info in the SYS aud$ table. And v$_session info doesn't get "saved" over the course of a day/week/month.
    Any ideas how to accomplish this?

    See this, but note the caveats:
    http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:1830073957439
    Tom Best

  • How can I use Flash_Slideshow.SWF in my Flash CS4 document?

    Hi,
    I have downloaded a nice Flash Slide show file (.SWF) and would like to use in my Flash CS4 document without any modification (as it is). How can I use it? There is no .Fla file this Slide Show. It just works using xml file.
    Please do help.

    Hi,
    You need to load a .swf file in your flash document using the loader class. I'm assuming you are using the AS3. Please click on the below link which helps you to use the loader class.
    http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/flash/display/Loader.html
    Thanks

  • How can i start oracle databases? i am using Oracle 8.1.6 for linux.

    when i run dbstart,it gives me following message:
    Database "ora4cweb" warm started.
    but when i use sqlplus,it says:
    ORA-01034: ORACLE not available
    i made a mistake ,i shutdown my linux before i shutdown oracle databases,how can i start oracle databases now?thanks in advance.

    try it without the scripts...
    login to linux as oracle
    start server manager
    svrmgrl
    connect internal
    startup
    select sysdate from dual;if that works
    exitcheck listener
    lsnrctl
    statif nothing running type
    start
    exitnull

  • How to know MS Access Database is down through Java

    How i would know whether MS Access DataBase is down?
    Is there any specific code for it in Java
    Need a quick reply

    How i would know whether MS Access DataBase is down?"down"? If the file system on which it's running is unavailable, that's the best you can do. If you can't connect, it's "down".
    Is there any specific code for it in JavaNo. Doesn't sound very platform-independent.
    Need a quick replyFast enough?
    %

Maybe you are looking for