How to use embedded font (CFF) for Flash CS4?

Hi,
I am trying to embed "Arial Unicode MS" for use by TLF in my Flash CS4 project. As I googled around, I am using the "Flex SWC" approach, only not having any luck. Here is what I got:
//Code in Flex ActionScript project:
package
    public class FontEmbeds
        [Embed(source='C:/Windows/Fonts/ARIALUNI.TTF',
                fontFamily='ArialUnicodeMS',
                embedAsCFF='true'
        public const Font1:Class;
When I am trying to instantiate this class, I have AS code in my Flash main timeline:
var font:Font = new FontEmbeds_Font1();
Flash compiler says: "1067: Implicit coercion of a value of type FontEmbeds_Font1 to an unrelated type flash.text:Font."
Ok. Now after I changed it to:
var font:FontEmbeds_Font1 = new FontEmbeds_Font1();
Flash gives 3 errors:
"VerifyError: Error #1014: Class mx.core::FontAsset could not be found.
ReferenceError: Error #1065: Variable TextLayout is not defined.
ReferenceError: Error #1065: Variable MainTimeline is not defined."
I am assuming I have to create a Font1 object in order to use the embedded font. Is this assumption correct? As I've tried to use the "fontFamily" directly but Flash didn't seem to find the font at all:
charFormat.fontFamily = "ArialUnicodeMS";
Thanks.

Hi Eric,
Thanks for the info.
I've tried to use the "fontFamily" directly but Flash didn't seem to  find the font at all:
charFormat.fontFamily = "ArialUnicodeMS";
In one fla where I used pure TFL, nothing gets rendered at all in the container Sprite. Flash doesn't throw any errors either. In another fla where I used a ComboBox, etc. along with TFL, it throws an error says it can't compile since "there is no ActionScript found" and I got a screen where all the Flash components were  flickering. After several attempts, Flash crashed.
Also as a side note, the swc gets generated by Flash Builder Beta 2, at first it was 18mb and the second time I complied it become 9mb and stayed 9mb afterwards. Not sure if that's a concern.
Geng

Similar Messages

  • How to use embedded font

    Hi all,
    I have a flex application where i want to rotate the textarea.I have a mxml file and a .as file.I want to use the embedded font in my application.But I don't know anything.Please advice me details and also how to proceed to create embedded font,how to create the ttf file?I am not using any package and not using library path.
    Please help me.Thanks in advance.

    FangAvatar,
    looks like the same question as the other one we are talking about. The Live docs page
    http://www.adobe.com/livedocs/flex/3/html/help.html?content=fonts_04.html
    has ane xample with rotated labels just oevr half way down the page.
    If you are having trouble navigating with this link, just go to the root
    http://www.adobe.com/livedocs/flex/3/html/help.html
    then in the contents bar on the left open up
    User interfaces
    ...using fonts
    ......using embedded fonts
    the section is just above the heading "Using advanced anti-aliasing"
    Richard

  • How to use MS Access database in Flash CS4 using AS3

    Hello everyone,
         I need help for how use the MS Access database in FlashCS4 and I want to save and retrive the data from the database and display in the Flash window.
    Thanks with,
    Viswa.

    http://www.northcode.com/blog.php/2011/05/06/Using-ADO-Data-Sources-in-Flash-Projectors

  • [svn:fx-trunk] 10545: Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts

    Revision: 10545
    Author:   [email protected]
    Date:     2009-09-23 13:33:21 -0700 (Wed, 23 Sep 2009)
    Log Message:
    Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts
    QE Notes: 2 Mustella tests fail:
    components/DataGrid/DataGrid_HaloSkin/Properties/datagrid_properties_columns_halo datagrid_properties_columns_increase0to1_halo
    components/DataGrid/DataGrid_SparkSkin/Properties/datagrid_properties_columns datagrid_properties_columns_increase0to1
    These fixes get us to measure the embedded fonts correctly when going from 0 columns to a set of columns so rowHeight will be different (and better) in those scenarios
    Doc Notes: None
    Bugs: SDK-15241
    Reviewer: Darrell
    API Change: No
    Is noteworthy for integration: No
    tests: checkintests mustella/browser/DataGrid
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-15241
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/DataGrid.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridBase .as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridColu mn.as

    Hi Matthias,
    Sorry, if this reply seems like a products plug (which it is), but this is really how we solve this software engineering challenge at JKI...
    At JKI, we create VI Packages (which are basically installers for LabVIEW instrument drivers and toolkits) of our reusable code (using the package building capabilities of VIPM Professional).  We keep a VI Package Configuration file (that includes a copy of the actual packages) in each of our project folders (and check it into source code control just as we do for all our project files).  We also use VIPM Enterprise to distribute new VI Packages over the network.
    Also, as others have mentioned, we use the JKI TortoiseSVN Tool to make it easy to use TortoiseSVN directly from LabVIEW.
    Please feel free to contact JKI if you have any specific questions about these products.
    Thanks,
    -Jim 

  • (How) can I use Embeded Fonts in Flex 3.3

    If I understand correctly, I need to transcode/embed the fonts in Flex 4 / CS 4, but is there any way to then get those embeded fonts into a Flex 3.3 application?

    Support for DefineFont4 (the cff property) is new in Flex Gumbo. It is not available in Flex 3.X. That said – I do have a solution for you. Create a separate Flex Gumbo project and use the cff property to embed the font you need into that SWF. Then embed the font SWF that you just created in Gumbo into your Flex 3.3 application.
    Check out the “Building a Font SWF for use in any Flash Application” section in my DefineFont4 blog post:
    http://blogs.adobe.com/tlf/2008/11/embedded_font_subsetting_using.html
    Here is an article on embedding a SWF in Flex:
    http://blog.flexexamples.com/2007/10/25/embedding-fonts-from-a-flash-swf-file-into-a-flex- application/
    Hope this helps!

  • HOW TO: using custom fonts in native storyboard views from an ANE on iOS

    Hey,
      In our apps, we have embedded storyboards into an ANE, and successfully used those screens in an AIR app, and figured out how to use custom fonts in those views.
      I wrote a quick blog post about it and just thought I'd share it real quick in case it helps someone.
    ANE for iOS with Custom Framework – Using Custom Fonts | khef.co

    Hi WayHsieh,
    >>can I just "install" fonts through Word App? Does Word Apps have enough privilege to install fonts on Windows? Can I just click a button in Word App, and then it will install fonts automatically?<<
    Based on my understanding, it is hard to achieve the goal. Because the app webpage is hosted inside an Internet Explorer control which, in turn, is hosted inside an app runtime process that provides security and performance isolation and it is under
    low-Integrity level.
    Here is the figure for apps for Office runtime environment in Windows-based desktop and tablet clients:
    You can get more detail about Privacy and security from links below:
    Privacy and security for apps for Office
    Hope it is helpful.
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Possible to use embedded font in TLFTextField, with TextFormat?

    I want to be able to dynamically change the font in a TLFTextField to an embedded font (not a device font).  I'm using Flash CS5.
    The only way I've found a TLFTextField will use an embedded font is if the on-stage TLFTextField has been set to use that font through the Flash UI.  The example code I've found online (Font.registerFont etc) all works fine for a TextField, but not TLFTextField.
    Below is a very simple piece of code that I expected to work.  I have a font (Earwig Factory) embedded in my library (as DF4, linkage "Earwig"), and the isFontCompatible trace call prints "true", but still it is using the device font - if I remove the system font from my machine (or view the SWF on another machine) it falls back to Times New Roman.
    Can anyone give a very simple example of a TLFTextField dynamically selecting an embedded font?  Eventually I would like to store my fonts in a separate SWC / SWF, but for now just working out of the Library would be a good start.
    Thanks,
    Grant
    import flash.text.TextFormat;
    import flash.text.AntiAliasType;
    import flash.text.FontStyle;
    import fl.text.TLFTextField;
    import flash.text.engine.FontLookup;
    var format:TextFormat = new TextFormat();
    format.font = "Earwig Factory"
    trace("Earwig Factory isFontCompatible: " + tf.isFontCompatible("Earwig Factory", FontStyle.REGULAR) );
    tf.defaultTextFormat = format;
    tf.embedFonts = true;
    //tf.antiAliasType = AntiAliasType.ADVANCED;
    tf.setTextFormat(format);
    //tf.textFlow.fontLookup = FontLookup.EMBEDDED_CFF;

    Ok, I have some success - I can get an on-stage TLFTextField to dynamically use an embedded font.  However, this is quite complex, and doesn't use a TextFormat.  And is this seriously the way Adobe intends us to do it - if so perhaps this should be documented better?
    import fl.text.TLFTextField;
    import flashx.textLayout.formats.TextLayoutFormat;
    import flashx.textLayout.elements.TextFlow;
    import flash.text.TextFormat;
    import flash.text.AntiAliasType;
    import flash.text.FontStyle;
    import flash.text.Font;
    import flash.text.engine.FontLookup;
    import flashx.textLayout.edit.ISelectionManager;
    import flashx.textLayout.edit.EditManager;
    import flashx.textLayout.edit.SelectionState;
    var updateTF:TLFTextField = stageTF;
    var applyFont:Font = new Earwig();
    updateTF.embedFonts = true;
    var tlfFormat:TextLayoutFormat = new TextLayoutFormat();
    tlfFormat.fontFamily = applyFont.fontName;
    tlfFormat.fontLookup = FontLookup.EMBEDDED_CFF;
    updateTF.textFlow.invalidateAllFormats();
    updateTF.textFlow.hostFormat = tlfFormat;
    var prevManager:ISelectionManager = updateTF.textFlow.interactionManager;
    var editManager:EditManager = new EditManager();
    var sel:SelectionState = new SelectionState(updateTF.textFlow, 0, updateTF.text.length);
    updateTF.textFlow.interactionManager = editManager;
    editManager.applyLeafFormat(tlfFormat, sel);
    updateTF.textFlow.interactionManager = prevManager;
    updateTF.textFlow.flowComposer.updateAllControllers();

  • How to use unicode fonts in Oracle forms 10g?

    Hi I am working in forms 10g for quite a long time, the software that I have developed so far are all in English language. Now I have requirements to use Bengali Fonts in Forms 10g. I am facing difficulties doing that. Please reply with help. Thanks
    Hasan Al Mamun

    Check this forum post (though that is for 6i, it would be of helpful for you)
    How to use unicode fonts in Oracle forms 10g?
    -Arun

  • How to use MICR fonts in Adobe forms (webdynpro java

    Hi,
          We have a requirement where we need to print some MICR codes (for checks) through Adobe Forms.
    I have installed some true type MICR fonts in windows and Adobe Font Manager (in ADS) as well.
    It is visible in the Adobe Form design time (Font palette) and when I use the font for text, it is visible in preview too. But when I run the web dynpro application, in the online form it is converted into Standard font (Times new Roman).
    Is there anyway to handle this issue.
    Please let me know.
    I am using NWDS 7.0.1
    Adobe Live cycle designer 7.1
    SAP NW 2004s SP14
    Thank you,
    Vasu

    Check this forum post (though that is for 6i, it would be of helpful for you)
    How to use unicode fonts in Oracle forms 10g?
    -Arun

  • How to use OCR Font A type by the time of writing some text into Pdf fil

    Hi,
    I am generating one pdf file in java. How can I use OCR Font A for text of pdf file ..Please can any one help where can I get OCR Font A and how to use that one in java ... I want to write some text into pdf file and that text should use OCR Font A family ...
    Thanks.

    This document shows how to disable OCR during conversion; just do the opposite: https://forums.adobe.com/docs/DOC-3062

  • How to use Google Fonts in email?

    Hi,
    I would like to know how I use google fonts in my emails.
    We're using the ubuntu font and I see the fonts on my computer but after sending an email the fonts change.
    I'm using the addon SmartTemplate4.
    Hope any f you know the answer!
    Thanks in advance

    Several online resources point to these two articles at Campaign Monitor:
    * [https://www.campaignmonitor.com/blog/post/3897/using-web-fonts-in-email Using web fonts in email] (Dec. 2012)
    * [https://www.campaignmonitor.com/resources/will-it-work/webfonts/ Web Fonts] (permanent resource)
    The first link provides examples on how to do this, while the second one has informaiton about email client support & compatibility with this feature.
    Keep in mind using web fonts will have a limited effect if viewing such emails while offline.
    [http://kb.mozillazine.org/Default_HTML_font_for_new_messages_-_Thunderbird This older MozillaZine article] also has information about fonts use in Thunderbird. In my experience in most cases the receiving party will have to have the fonts locally installed for the best results.

  • How to use one email adress for multiple recipients

    Hello,
    I'd like to know how to use one email adress for multiple recipients. 
    this would be very useful or projects. for example;
    if i send one mail to [email protected], all people in this project get an email.
    I will add the people in this project myself. 
    I know it is possible, but I don't know how to do it ;-)
    please help me! 

    Hope this help.
    _http://technet.microsoft.com/en-us/library/cc164331(v=exchg.65) .aspx

  • How to Use the same iview for both KM End User and the KM Administrator

    Hi friends,
    *This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
    Menu Options.
    i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
    Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
    the presentation settings for the KM Folder u201EReports_kmFolder‟.
    Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
    -> Km Content. Click on Details link of the folder reports_kmFolder.
    Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
    Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
    Click u201EOK‟.
    Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
    Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
    How rto resolve this????
    Regards,
    Prasad.

    Hello Prasad,
    Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
    Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
    Regards,
    Lorcan.

  • How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?

    Hi All,
    Hope to you a very happy new year,
    I have two differnt LAP 1300 and 1200 in my network and I need to add theme to the WLC,
    I successed to add one of theme by the option 60 in the DHCP pool at the Core SW,
    So my quetion is below:
    How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?
    Thanks in Advanced,
    Ahmed,

    To add to Scott's post.  Option 60 would be useful if you needed to put certain types of AP on specific controllers.  Otherwise, no real need to use it for the most part.
    Though, I do recall an issue a few years ago that some windows machines had issues getting DHCP if option 43 is being returned.
    Now, on an IOS switch, you can only configure one option 60 per DHCP scope
    HTH,
    Steve
    Please remember to rate useful posts, and mark questions as answered

  • How to use Add Query Criteria for the MySQL data Base in Netbeans ?

    How to use Add Query Criteria for the MySQL data Base in Netbeans Visual web pack.
    When the Query Criteria is add like
    SELECT ALL counselors.counselors_id, counselors.first_name, counselors.telephone,counselors.email
    FROM counselors WHERE counselors.counselors_id = ?
    when i run this Query in the Query Window
    i get a error message Box saying
    Query Processing Error Parameter metadata not available for the given statement
    if i run the Query with out Query Criteria its working fine.

    *I am glad I am not the only one who have this problem. Part of issue has been described as above, there are something more in my case.
    Whenever I try to call ****_tabRowSet.setObject(1, userDropList.getSeleted()); I got error message as shown below:*
    The Java codes are:
    public void dropDown1_processValueChange(ValueChangeEvent event) {
    Object s = this.dropDown1.getSelected();
    try {
    this.User_tabDataProvider1.setCursorRow(this.User_tabDataProvider1.findFirst("User_Tab.User_ID", s));
    this.getSessionBean1().getTrip_tabRowSet1().setObject(1, s);
    this.Trip_tabDataProvider1.refresh();
    } catch (Exception e) {
    this.log("Error: ", e);
    this.error("Error: Cannot select user"+e.getMessage());
    SQL statement for Trip_tabRowSet:
    SELECT ALL Trip_Tab.Trip_Date,
    Trip_Tab.User_ID,
    Trip_Tab.Destination
    FROM Trip_Tab
    WHERE Trip_Tab.User_ID = ?
    Error messages are shown below:
    phase(RENDER_RESPONSE 6,com.sun.faces.context.FacesContextImpl@5abf3f) threw exception: com.sun.rave.web.ui.appbase.ApplicationException: java.sql.SQLException: No value specified for parameter 1 java.sql.SQLException: No value specified for parameter 1
    com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.cleanup(ViewHandlerImpl.java:559)
    com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.afterPhase(ViewHandlerImpl.java:435)
    com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:274)
    com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
    javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
    org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
    com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
    org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
    org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
    org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
    org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
    org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
    org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
    org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
    org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
    org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
    org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
    org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
    org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
    org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
    com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
    com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
    com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
    com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
    com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
    com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
    com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
    tandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
    java.sql.SQLException: No value specified for parameter 1
    at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:910)
    at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1674)
    at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1622)
    at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1332)
    at com.sun.sql.rowset.internal.CachedRowSetXReader.readData(CachedRowSetXReader.java:193)
    at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:979)
    at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:1439)
    at com.sun.data.provider.impl.CachedRowSetDataProvider.checkExecute(CachedRowSetDataProvider.java:1274)
    at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorRow(CachedRowSetDataProvider.java:335)
    at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorIndex(CachedRowSetDataProvider.java:306)
    at com.sun.data.provider.impl.CachedRowSetDataProvider.getRowCount(CachedRowSetDataProvider.java:639)
    at com.sun.webui.jsf.component.TableRowGroup.getRowKeys(TableRowGroup.java:1236)
    at com.sun.webui.jsf.component.TableRowGroup.getFilteredRowKeys(TableRowGroup.java:820)
    at com.sun.webui.jsf.component.TableRowGroup.getRowCount(TableRowGroup.java:1179)
    at com.sun.webui.jsf.component.Table.getRowCount(Table.java:831)
    at com.sun.webui.jsf.renderkit.html.TableRenderer.renderTitle(TableRenderer.java:420)
    at com.sun.webui.jsf.renderkit.html.TableRenderer.encodeBegin(TableRenderer.java:143)
    at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:810)
    at com.sun.webui.jsf.component.Table.encodeBegin(Table.java:1280)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:881)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
    at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
    at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:182)
    at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:285)
    at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:133)
    at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:244)
    at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
    at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
    at com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
    at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
    at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
    at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
    at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
    at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
    at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
    at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
    at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
    at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
    at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
    Also when I tried to update my MYSQL connector / J driver to version 5.1.5 from 5.0.5 (NB 5.5.1) and 5.0.7 (NB 6.1), I could not get it work (looooong time to search some JDBC classes and with no response in the end) on both of my Netbean 5.5.1(on PC) and Netbean 6.1(on laptop) IDEs.
    Could anybody look into this issue.
    Many thanks
    Edited by: linqing on Nov 22, 2007 4:48 AM

Maybe you are looking for

  • ITunes Library exsists but is no longer detected

    My "physical" library exsists. It's been sitting fine in my local computers hard drive in the music folder for ages. Never had a problem. Then, I turned my computer off, went away, came back, turned it on, ready to sync some apps to my iPad, when iTu

  • Why does error message occur when "Save as Adobe PDF" is used?

    "Save as an Adobe PDF" does not work; it only generates "Error An error occurred while saving the PDF file." I can create a PDF two ways: (1) distilling a Postscript file and using Acrobat Distiller, and (2) using the MacOS PDF generator (MacOS X 10.

  • Issue while converting turkish text in PDF via SMARTFORMS

    Hello Experts , We are currently involved in translating an application to Turkish. Though the translation is completely done, when we test the issue we find that the application is working perfectly with the Turkish text but the transfer of data fro

  • Tracking freight costs by customer - options?

    I have had a request as to how to track profitability by customer.  This is to include freight.  The freight price to the customer is included in the material unit prices, but the costs are billed separately.  Currently there is no link (other than v

  • Convert varchar to date in OBIEE-sql server database

    Hi we have SQL server database, and we need to convert varchar to to_date . In OBIEE we use evaluate,cast etc on Oracle......Not sure about sql server..please help