How to use myself JSP template for my projects

I am using JDev 10. .I realized the default templates of JSP in JDev don't match with my projects so I want to create my own template for JSP Pages. I read some threads in Forum about this problem but I am a beginner, I cannot understand fully and don't know the way to create template nor adding it into Project. Someone can tell me where I can find the tutorials, examples(demo).
Thank you very much.

Hi,
The Bex report uses the Standard Template 0ANALYSIS_PATTERN while it is executed.
So if your sure that the look and feel of all the Reports is going to remain same, you don't need to even attach all these Queries to Templates in WAD.
When you execute the BEx query, it would pick up the standard template and run it in portal.
But if you want to customize the Report Template:
1) You can change this standard template 0ANALYSIS_PATTERN and customize it according to ur requrement in WAD.
2) Or you can create a copy of this standard template and change it as required. Then change the template in spro (transaction RSCUSTV27) to point to this Z template.
Let me know if you need more details.
Regards,
Forum

Similar Messages

Can a RoboHelp project be used as a template for other projects?

I noticed there is the ability to "duplicate a layout". Does
that mean I can use my RoboHelp project with all its settings as a
template for other projects. I corrupted an existing project by
deleting a generated HTML file. I forced an update on one of the
chapters in a linked FM book and now for whatever reason in the
generated output, the entire book is being re-created within the
folder for the chapter in which I deleted the HTML output and
forced an output.
Surely I don't have to redefine all the settings again in the
FrameMaker Document Settings dialog, and in the WebHelp layout. All
enlightenment is much appreciated. Come on baby give it to me one
more time! Sorry couldn't resist. It is Friday after all.
Peter

Hi there Writerman_in_TO
You seem to have a multiple segmented question.
I noticed there is the ability to "duplicate a layout". Does
that mean I can use my RoboHelp project with all its settings as a
template for other projects.
In one way, yes you can. You are able to use Windows Explorer
to copy the project folder to a new location. Once you do that, you
can open RoboHelp and open the project. Then click File > Rename
Project and off you go.
Not sure what to tell you about the Frame > RoboHelp
mashup. Not familiar with Frame yet. Hopefully someone more savvy
there will pop in and help.
Cheers... Rick

How to use one WAD template for all the available queries

Hi,
I have created a WAD template... Now we have close to 25 queries which will use that template for displaying their output at Portal...
Is there any way that i don`t have to create multiple copies of my WAD template...
I.e. all queries would call that same template through portal...

Hi,
The Bex report uses the Standard Template 0ANALYSIS_PATTERN while it is executed.
So if your sure that the look and feel of all the Reports is going to remain same, you don't need to even attach all these Queries to Templates in WAD.
When you execute the BEx query, it would pick up the standard template and run it in portal.
But if you want to customize the Report Template:
1) You can change this standard template 0ANALYSIS_PATTERN and customize it according to ur requrement in WAD.
2) Or you can create a copy of this standard template and change it as required. Then change the template in spro (transaction RSCUSTV27) to point to this Z template.
Let me know if you need more details.
Regards,
Forum

How to use oracle fusion middleware for integration project ?

hi all,
in my projects, customer (a bank) already has many applications (bankend & frontend) that are complicatedly connected. I intend to use oracle fusion middleware to integrate all applications and make adding new applications in the future easier. I have worked through documents in the oracle website but I still have no idea how to use oracle fusion middleware to address the requirement, besides oracle fusion middleware includes a bundle of applications I don't know which one I would need.
could anyone give me some instructions ? appreciate your help.
thank very much,

Hi,
For this short description of environment, could be ODI is a incredible tool to help you...
Take a look into my blog that has a lot of concepts and "how to do" instructions.... http://odiexperts.com
However to try help you, what are the used technologies?
Where are you from?
Cezar Santos
http://odiexperts.com

How to use single JSP page for multiple users.

Hi ,
I am doing messenger kind of program using JSP and tomcat server.
When i type message it is showing in the some div. If some other person request for the same page by giving my IP address and jsp page, he should able to see what i have typed on page so far.
how can i do that one . can any one guide me .
Thanks in advance.

SuneelGoodatJava wrote:
Hi ,
I am doing messenger kind of program using JSP and tomcat server.
When i type message it is showing in the some div. If some other person request for the same page by giving my IP address and jsp page, he should able to see what i have typed on page so far.
how can i do that one . can any one guide me .
Thanks in advance.HTTP is a request/response protocol. You can't do what you're suggesting without "pushing" what you type to all the other users. That's not the way HTTP works. Maybe an applet and servlet.
%

How to use one email adress for multiple recipients

Hello,
I'd like to know how to use one email adress for multiple recipients.
this would be very useful or projects. for example;
if i send one mail to [email protected], all people in this project get an email.
I will add the people in this project myself.
I know it is possible, but I don't know how to do it ;-)
please help me!

Hope this help.
_http://technet.microsoft.com/en-us/library/cc164331(v=exchg.65) .aspx

How to use a Web Template with queries from multiple BW Systems?

Hi all,
can anybody help me how to use a Web Template with queries (DATA PROVIDER)in it from multiple BW Systems?
Thanks in advance, best regards
Frank

Great! Thanks for the quick response.
Have you tried this for XMLA datasources created within the EP system also?
i.e use Web Analyzer to create a view from the XMLA source and use that view within WAD?
Thanks.

How to use session variable in JSP function & How to use both JSP Servlet

Hi,
I am new to JSP and servlets
Still I am devloping a website in JSP. I am not mixing JSP with servlets, but I do create Java files for bean, logic and database works.
I try to keep the hard coding part out of JSP.
I dont how to use both JSP and Servlets in combination.
Hence If needed I write some functions in JSP.
but it gives me error
+<%! public void abc()+
+{+
int intUserId = Integer.valueOf((Integer) session.getAttribute("MySession_UserID"));
+}+
+%>+
Saying cannot find symbol session
1) So can u please tell how can I access session variables within JSP function
2) And also give me some links/tutorials about useing both JSP and Servlets in combination.
Thanks
Venkat

The application architecture when you use Servlets and JSP in a standard MVC pattern is explained here (under the heading "Integrating Servlets and JSP Pages") and here ...

Ask your question.How do I change the template for a pages document

How do I change the template for a pages document?

Once you've opened it, the opened document is no longer a template. Edit it as you would any other Pages document.
If you want to use the edited document as a Template, then , after editing, go File > Save as Template, give the new template a name, and click Save.
The old template will remain available in the location where you found it; the new one will be in the My Templartes sectionof the Templates Chooser.
Regards,
Barry

How to use Spell-check functionality for textbox (like Orkut, gtalk)

How to use Spell-check functionality for tex Hello Friends,
I am working on a JSP application. I wanted to add Spell check for text box like we have here, when we post a message. It automatically shows red line under the word, when ever spelling is wrong. Please tell me how I can do this. If possible, the code too.
Thanks.

I believe the spell checking you see here, or on any other site, is the spell checking built into Firefox. At least that's what I see. Are you using Firefox?

Using a letterhead template for a multi-page document

When using a letterhead template for a multipage document, how do I turn off the template for pages after the first page? I do not want to have the letterhead show up on every page of a letter.

John,
You can set new margins for your new section in the Layout Inspector. After removing the letterhead elements open the Layout Inspector, choose the Layout tab and set the margins as you need them.
Once you've created and formatted the section to your liking, make it a permanent part of your template.
1. With the cursor on the second page, go to Format>Advanced>Capture Pages
2. Give the page a descriptive name, such as 'Second Page'. Include 'First page only.'
3. Click 'Ok.'
This 'Second Page' is now listed under the "Sections" icon on your toolbar.
4. Save the document as a template.
Now, whenever you start a new document based on this template add the second page using the Section Icon.
There is a shortcoming to this method in that text will not flow from the first page to the second, given that there is a section break between the two pages. This would be the case even in Word. Of course, even in Word you could not change the margins for the second page without also changing the margins for the first page unless you used a section break.
One way to avoid this problem is to but your address block for the first page into a page high text box and allow text to wrap around it. You can keep the same margins for the first and second page, but on the first page the text will be pushed over to the right. When it wraps to the second page, the text will return to the left margin.
Good luck,
Terry

How to create a new template for pages in iPad?

How to create a new template for pages in iPad?

In spite of the latest updates Pages for iPad does not support:
1) User templates
2) Headers
3) Footers
4) Page numbers
and it is not compatible with Pages for OSX, a document cannot be edited alternatively on Mac and iPad without destroying headers and footers.
- The Word export is far from perfect
- Does not really support Page Layout mode (you cannot duplicate a page at least)
- Does not have a multi-page overview
- The spelling support of iOS and OSX is at the level of Apple Maps except 4-5 languages.
- It takes a long time until it starts
INSTEAD, according to the latest updates:
- It can do change tracking
- Lock and unlock objects
- Add reflections to shapes
Dear Apple, please understand:
- We like iPad and we wish to use it for real work.
- We wish to have user templates, headers, footers and page numbers.
- We do not expect all the features of Pages for OSX, but we do expect real compatibility.
- We do not wish to switch back to Word for Windows unless you force us.
Please try to concentrate on real development not on unimportant changes like in the latest dissapointing update.

How to Use the same iview for both KM End User and the KM Administrator

Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?

Hi All,
Hope to you a very happy new year,
I have two differnt LAP 1300 and 1200 in my network and I need to add theme to the WLC,
I successed to add one of theme by the option 60 in the DHCP pool at the Core SW,
So my quetion is below:
How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?
Thanks in Advanced,
Ahmed,

To add to Scott's post. Option 60 would be useful if you needed to put certain types of AP on specific controllers. Otherwise, no real need to use it for the most part.
Though, I do recall an issue a few years ago that some windows machines had issues getting DHCP if option 43 is being returned.
Now, on an IOS switch, you can only configure one option 60 per DHCP scope
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

How to use Add Query Criteria for the MySQL data Base in Netbeans ?

How to use Add Query Criteria for the MySQL data Base in Netbeans Visual web pack.
When the Query Criteria is add like
SELECT ALL counselors.counselors_id, counselors.first_name, counselors.telephone,counselors.email
FROM counselors WHERE counselors.counselors_id = ?
when i run this Query in the Query Window
i get a error message Box saying
Query Processing Error Parameter metadata not available for the given statement
if i run the Query with out Query Criteria its working fine.

*I am glad I am not the only one who have this problem. Part of issue has been described as above, there are something more in my case.
Whenever I try to call ****_tabRowSet.setObject(1, userDropList.getSeleted()); I got error message as shown below:*
The Java codes are:
public void dropDown1_processValueChange(ValueChangeEvent event) {
Object s = this.dropDown1.getSelected();
try {
this.User_tabDataProvider1.setCursorRow(this.User_tabDataProvider1.findFirst("User_Tab.User_ID", s));
this.getSessionBean1().getTrip_tabRowSet1().setObject(1, s);
this.Trip_tabDataProvider1.refresh();
} catch (Exception e) {
this.log("Error: ", e);
this.error("Error: Cannot select user"+e.getMessage());
SQL statement for Trip_tabRowSet:
SELECT ALL Trip_Tab.Trip_Date,
Trip_Tab.User_ID,
Trip_Tab.Destination
FROM Trip_Tab
WHERE Trip_Tab.User_ID = ?
Error messages are shown below:
phase(RENDER_RESPONSE 6,com.sun.faces.context.FacesContextImpl@5abf3f) threw exception: com.sun.rave.web.ui.appbase.ApplicationException: java.sql.SQLException: No value specified for parameter 1 java.sql.SQLException: No value specified for parameter 1
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.cleanup(ViewHandlerImpl.java:559)
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.afterPhase(ViewHandlerImpl.java:435)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:274)
com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
tandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
java.sql.SQLException: No value specified for parameter 1
at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:910)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1674)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1622)
at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1332)
at com.sun.sql.rowset.internal.CachedRowSetXReader.readData(CachedRowSetXReader.java:193)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:979)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:1439)
at com.sun.data.provider.impl.CachedRowSetDataProvider.checkExecute(CachedRowSetDataProvider.java:1274)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorRow(CachedRowSetDataProvider.java:335)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorIndex(CachedRowSetDataProvider.java:306)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getRowCount(CachedRowSetDataProvider.java:639)
at com.sun.webui.jsf.component.TableRowGroup.getRowKeys(TableRowGroup.java:1236)
at com.sun.webui.jsf.component.TableRowGroup.getFilteredRowKeys(TableRowGroup.java:820)
at com.sun.webui.jsf.component.TableRowGroup.getRowCount(TableRowGroup.java:1179)
at com.sun.webui.jsf.component.Table.getRowCount(Table.java:831)
at com.sun.webui.jsf.renderkit.html.TableRenderer.renderTitle(TableRenderer.java:420)
at com.sun.webui.jsf.renderkit.html.TableRenderer.encodeBegin(TableRenderer.java:143)
at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:810)
at com.sun.webui.jsf.component.Table.encodeBegin(Table.java:1280)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:881)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:182)
at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:285)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:133)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:244)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
Also when I tried to update my MYSQL connector / J driver to version 5.1.5 from 5.0.5 (NB 5.5.1) and 5.0.7 (NB 6.1), I could not get it work (looooong time to search some JDBC classes and with no response in the end) on both of my Netbean 5.5.1(on PC) and Netbean 6.1(on laptop) IDEs.
Could anybody look into this issue.
Many thanks
Edited by: linqing on Nov 22, 2007 4:48 AM

How to use myself JSP template for my projects

Similar Messages

Maybe you are looking for