How to use notifier

Hello,
I will try to creat extention for photoshop in Flash Builder 4  using CS Extention Toolkit 3.4.
For automatic or something happen, i think we have to used notifier but i do't no how to used it and  where i have to code that thing.
Or any other thing used for automation?
Thanks
Matt Forman

I think I have got it working.  Check out the new snapshot to see what I changed.
Attachments:
SetNotificationNew.jpg ‏85 KB

Similar Messages

  • How to use notify-osd with qt apps in openbox

    Hi, i'm using openbox and Notify-osd. With qhte GTK apps it works fine and i have no problems. But, all the QT apps don't work with notify-osd. Is there a way to get it work?
    I've tried editing the  this /usr/share/dbus-1/services/org.freedesktop.Notifications.service file, and it says:
    [D-BUS Service]
    Name=org.freedesktop.Notifications
    Exec=/usr/lib/notify-osd/notify-osd
    But, it still not working with the QT or the KDE apps. like amarok or choqok.

    na12 wrote:How can I change theme of qt applications in openbox? Qtconfig works only for gnome but not for openbox.It is ugly to have dark gtk apps and light qt apps.
    This is what worked for me:
    Put style=GTK+ at the end of your.config/Trolltech.conf. Got idea from here.

  • How do I notify apple that I need a refund of the $100.00 that I paid for fifty gigs of iCloud I can't use because I thought I could add my music library to it but I can't because iTunes sharing isn't running yet ?

    How do I notify Apple that I need a Refund of the $100.00 that I paid for fifty gigs of iCloud storage that I can't use because I thought I would be able to put my music library on it and found out I can't? Only iTunes purchases are capable of use in iCloud presently.

    1-800-MYAPPLE

  • How to properly use notifier?

    Hello,
    attached is the screenshot of notifier communication. A NotifierSend.vi sends a boolean notifier (True), A receiver traps it in two loops.
    I am getting the notifier indication properly in receive vi, but if I insert a "release notifier" after sending the notifier in NotifierSend.vi the receiver sometimes flashes error 1122, indication the notifier referance was destroyed when it was waiting. 
    I just want to confirm if this is the right way of using notifiers. do we have to release the referance to notifier anytime?
    I am going to use it to execute two  blocks in the receiver when ever the notifier is received.
    Attachments:
    NotifierSend.png ‏47 KB
    NotifierRcv.png ‏50 KB

    I just want to confirm if this is the right way of using notifiers.
    I would really hesitate to confirm that is the right way.  I fact, I would say that that way shows that you missed something basic about using functions on the synchronization pallatte.
    Go back through the shipping examples on queues and notifiers.
    Do not use "Obtain Notifier" in a loop
    Do not use weakly named notifiers.  In fact, use an unnamed notifier wherever possible to prevent some other chunk of code from doing unexpected things to "X" from some other place.  (Really!  Think about what would happen if you put together a large project and both you and a co-developer named a notifier "X"-  imagine the hair loss you would suffer trying to figure out what the heck happened when you got notifications meant for the other X or X got destroyed in the other producer?!!!!)
    As an aside- You really should use the error chain to enforce dataflow rhater than those Flat Sequence Structures- Trust me you'll eventually thank me for telling you that.
    Jeff

  • Timing for Data Acquisition Using Notifiers

    I'm trying to use notifiers to transfer data from an acquisition (master) loop to the slave loop. I want data to be transferred for analysis only when the VI is in a certain state - not in all states. That's why I'm preferring to use notifiers instead of queues (I want all data collected during the other states to be disregarded). I have attached a simplified version of what I'm trying.
    The master loop generates a data point every second. The slave loop is in a "delay" state for 5 seconds and then in "acquire" state for 3 seconds. Given this architecture I would expect no data for 5 seconds and then 3 data points to be plotted during "acquire" state because only one data point is generated per second. But for some reason I get 5 or 6 data points during every acquire cycle. I haven't figured out why I get 5-6 data points instead of 3. It probably has to do with the timing functions I'm using.  
    Thanks!
    -Arnie 
    Attachments:
    Notifier Data Transfer Template.vi ‏62 KB

    Here is an example of a race condition without the use of local or global variables.  What is happening is that the notifier is already queued up with a value even before the Elapsed Timer has even started.  So one extra value will be in the output array.  Also, depending on how the parallel loops perform (which goes first), there may be an extra value queued up before the Time Elapsed event could fire.  Typically, when I ran it, I got an array size of 6 at first, and then it went down to 5.  Clearly the architecture is not right for what you want to do.  Instead of depending on timers and parallel loop timing, you could receive all the values queued and just discard the ones you don't want.
    - tbob
    Inventor of the WORM Global

  • How to use multiple threads and swing for displaying status/interaction

    I have a Swing-app which have to show progress and allow userinteraction for these tasks:
    * First:
    retrieve a list of IDs(String) from the database (single thread running)
    * Second:
    some work on the id-list and list written to hd (same thread as above)
    * Third:
    retrieve Objects (based on the id-list) from different sources (Multiple Threads are running)
    To show the status I have a JProgressBar (indeterminate while task1&2 running) and
    a JTextArea showing the current status (connect,retrieve list, sort, ...)
    When task3 is starting the JTextArea have to disappear and be replaced by a ScrollPane
    with an array of Labels/TextAreas showing the status of each thread.
    While theses threads are working, the ID-list will be consumed and the JProgressBar
    shows the remaining precentage of the hole progress.
    Everything is working so far (excepts UI :) , the problem(s) I have:
    I need the threads to interacts with the user through the ui. e.g: "Connection to db-xyz lost! reconnect?"
    But I don´t know how to do this correctly.
    I think one way would be to send an event to the ui... but how?
    (the ui must know which thread is calling to unpause it after user answered)
    I know that threads should NOT change the swing(-container) - How do I notify the ui that a thread has a question?
    Since these threads are really time-consuming the UI is not updated frequently,
    how can I increase this? (perhaps using another thread-priority?)
    thanks for help!

    if/when your threads need to interact with the UI, they can create a Runnable & send it to SwingUtilities.invokeLater or invokeAndWait. This Runnable can popup a message to the user, and act on the choice of the user (reconnect, cancel, ...). This action could be something which "unpauses" the task thread.
    You may need to do synchronisation between the code in the Runnable & the Thread to which it is related - so the latter Thread knows when the user has made the choice.

  • How can we notify the Manager

    Hi All,
    Can you please give me idea for the following
    The idea is to having, some users will enter data in Input Schedule and save it as excel. This is ok
    The problem here is how can we notify to the Manager that the excel is ready to review? after that they review it and send to database.
    Thanks in Advance
    Regards,
    VeeKum

    If you keep data outside of BPC (in Excel) then just send an email manually, like you saved the spreadsheet manually.
    Work outside of BPC can't be controlled by BPC.
    If you want to keep data inside BPC then use Work Status that allows you to send notifications.

  • I don't understand the thing you call live bookmarks never used it, and most forums I have used notify VIA E-mail not giving out my E-mail address information when a reply has been made to the thread in question.

    So how do I get notified of updates in this forum? As I said: I don't understand the thing you call LIVE BOOKMARKS I have never used them, and most forums I have used notify VIA E-mail not giving out my E-mail address, or other private information when a reply has been made to the thread in question, so how do I get notified of updates in this forum? I have seen no normal options for setting my viewing preferences used for this forum. Thank You.

    Thanks for your reply via email/msg. He wrote:
    If you are interested in the actual design data for the Xeon processor, go to the Intel site and the actual CPU part numbers are:
    Xeon 4 core - E5.1620v2
    Xeon 6 core - E5.1650v2
    Xeon 8 core - E5.1680v2
    Xeon 12 core - E5.2697v2
    I read that the CPU is easy to swap out but am sure something goes wrong at a certain point - even if solderedon they make material to absorb the solder, making your work area VERY clean.
    My Question now is this, get an 8 core, then replace with 2 3.7 QUAD CHIPS, what would happen?
    I also noticed that the 8 core Mac Pro is 3.0 when in fact they do have a 3.4 8 core chip, so 2 =16? Or if correct, wouldn't you be able to replace a QUAD CHIP WITH THAT?  I;M SURE THEY ARE UO TO SOMETHING AS 1) WE HAVE SEEN NO AUDIO FPU OR PERHAPS I SHOULD CHECK OUT PC MAKERS WINDOWS machines for Sisoft Sandra "B-E-N-C-H-M-A-R-K-S" -
    SOMETHINGS UP AND AM SURE WE'LL ALL BE PLEASED, AS the mac pro      was announced Last year, barely made the December mark, then pushed to January, then February and now April.
    Would rather wait and have it done correct than released to early only to have it benchmarked in audio and found to be slower in a few areas- - - the logical part of my brain is wondering what else I would have to swap out as I am sure it would run, and fine for a while, then, poof....
    PEACE===AM SURE APPLE WILL BLOW US AWAY - they have to figure out how to increase the power for 150 watts or make the GPU work which in regard to FPU, I thought was NVIDIA?

  • How to get notified when changes happen on Hyper-V host or VMs

    Is there a way to get notified on Hyper-V host or VM changes? Our intention is to notify the system-administrators on any changes.
    1. How to get notified when new VM is created (or deleted) on Hyper-V.
    2. How to get notified when any memory/CPU/disk is added (or deleted) on any VM(s).
    In general: 
    - Get notified when any changes happens to Hyper-V host.
    - Get notified when any changes happens on any VMs.
    Our target servers are Windows Server(2008, 2008 R2, 2012, and 2012 R2)
    We tried to get the notification using "Event Viewer" on different Windows servers (2008, 2008 R2, 2012, and 2012 R2)
    We were able to get event-logs only on one of our 2012 R2 server as described below on creation/deletion of VMs (on another 2012 R2 server, we did not got any such event, Is there any setting required on host computer to get Hyper-V event-logs in "Event
    Viewer"?)
    Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
    Source:        Microsoft-Windows-Hyper-V-VMMS
    Date:          12/18/2014 1:21:45 AM
    Event ID:      13002
    Task Category: None
    Level:         Information
    Keywords:      
    User:          SYSTEM
    Computer:      HPHyper-V.COMPUTERNAME.lab
    Description:
    A new virtual machine 'TestVM' was created. (Virtual machine ID A0FED305-7B1A-4BB5-952C-BA9634ACDA45)
    Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
    Source:        Microsoft-Windows-Hyper-V-VMMS
    Date:          12/17/2014 10:57:01 PM
    Event ID:      13003
    Task Category: None
    Level:         Information
    Keywords:      
    User:          SYSTEM
    Computer:      HPHyper-V.COMPUTERNAME.lab
    Description: The virtual machine 'TestVM' was deleted. (Virtual machine ID A0FED305-7B1A-4BB5-952C-BA9634ACDA45)

    Thanks for your reply,
    Just to make it more clear:
    In our environment we have enabled Hyper-V on following Windows servers: 2012 R2, 2012, 2008 R2, 2008. The environment is very dynamic, VMs are getting created and deleted very frequently. Our intention is to get notified by any means on VM creation/deletion,
    currently we are relying on event-logs (we are OK with any different mechanism for such notification if there exists, i,e other than event-logs)
    We were able to get event-logs only on few of our 2012 R2 server on creation/deletion of VMs. On another 2012 R2 server, we did not got any such event (do we need to make some settings on 2012 R2 to get events? If yes, what are those settings).
    Also we are not getting any such event of VM creation/deletion on our Windows Server 2012, 2008, 2008 R2. Is there any setting required on hese host computer to get Hyper-V event-logs in "Event Viewer" for VM creation/deletion?

  • I want to know what's the conference call in community level and how to use it

    i want to know what's the conference call in community level and how to use it

    Welcome to Apple Support Communities
    Conference calls are got when you reach level 4. Sometimes, ASC hosts may do a conference call about something related to Apple Support Communities. You will be notified through mail or through the "Using Apple Support Communities" forum.
    The last community calls were only for level 6 and higher users, so it's possible that you don't get invited to any until you reach level 6

  • How can I notify to VoiceOver an event so it can be announced (iOS)?

    Hi,
    I'm creating app for blind people. When I was developing for Mac I could use the NSSpeechSynthesizer interface to get accesso to voices APIs, but I found that this is not possible on the iOS because the voice API are not public.
    The problem I'm facing is simple. I have an application the does some things. As a result it should announce to the user the produced calculation. So, due we can't use voice apis, i suppouse the VoicOver must be active. The question is: how can I notify VoiceOver to read a label o something else when I finished the required task?
    Thank you for helping...

    If the calculation is a number, you could pre-record the various amounts needed and then formulate the answer as a combination of the various amounts and then play the resulting sound using AudioServicesPlaySystemSound.

  • How to get notify when new Email comes in...

    hi, any idea on how to get notify from phone when there is new email comes in to mailbox with specific key words in the subject, says like "urgent" ..... what are the components that i need to integrate with??
    messaging version 6.2

    Hi,
    Off the top of my head there are two ways:
    1. Use the ENS service to notify when messages arrive - filter out the ones you want. This is going to require some programming and a way to send the notification to the phone.
    http://docs.sun.com/app/docs/doc/819-2655
    2. Use a user-level sieve filter to send a copy of the messages you want to another email address which triggers an SMS.
    http://docs.sun.com/app/docs/doc/819-2650
    Regards,
    Shane.

  • How do I notify Apple about incorrect Map directions?

    Getting the street directions in NYC is a drag and can require another 15 minutes to get you places.  All it takes is one wrong turn!  How do I notify the powers that be to make that change?  I can't find anything on the support page.

    You do it within the maps app itself. Click on the circled "i" on the map page then Report a Problem.
    I quit using Apple Maps for directions.

  • I forgot the answers to my security questions, and the reset e-mail was never sent.  How do I notify apple that they never sent me the reset e-mail?  Thank you.

    I'm trying to download apps on my new iphone 5s, and I forgot the answers to my security questions.  The reset e-mail was never sent.  How do I notify apple that they never sent me the reset e-mail?  Thank you.

    Hello there, movies989.
    The following Knowledge Base article provides some great steps for issues with Apple ID security questions and contacting Apple Support:
    Apple ID: All about Apple ID security questions
    http://support.apple.com/kb/HT5665
    Of particular use in your case:
    What should I do if I don't remember the answers to my Apple ID security questions?
    Try answering them at least once to see if you can get them right, even if you are not sure you remember the answers to your security questions.
    If you are confident you can't remember them, try one of the following:
    If you have three security questions and a rescue email address
    sign in to My Apple ID and select the Password and Security tab to send an email to your rescue email address to reset your security questions and answers. 
    If you have one security question and you know your Apple ID passwordsign in to My Apple ID and select the Password and Security tab to reset your security question.
    If you have one security question, but don't remember your Apple ID password
    contact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
    Note: If you have forgotten your password and answer your security questions incorrectly too many times in a row, you will be unable to try to answer your security questions for a period of time. During that time you will not be able to reset your password and will not have access to your account.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • If I switch to ICloud mail how do I notify everyone of the change?

    If I switch to ICloud mail how do I notify everyone of the change? How do I change Apple ID to new email?
    [email protected] (current email)

    You would have to email everyone you know using the new account so that they can add the email address to their contacts.
    To create a new icloud account, go to
    http://www.apple.com/icloud/setup/

Maybe you are looking for