How to use one structure in different reports

Hi All,
We have created two reports on the same multi provider.
Created one structure with more than 50 key figures and used the option save as, provided technical name for that structure.
I want to use the same structure in second report too.But when opened second query i am not able to see the structure under srtucture tree.
Please help me on this....
Regards,
Siva.

Hi,
Please go through the below doc.
http://help.sap.com/saphelp_nw04/helpdata/EN/f1/0a5632e09411d2acb90000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/4d/e2bebb41da1d42917100471b364efa/content.htm
regards,
mahesh

Similar Messages

How to use a structure at run time....

Hi gurus,
I am confused on how to use the structure in our report..why do we need it...Please help me with that...
Thanks
Cheers:Jim

Or you could simply use a structure in your program to group like fields together. So that you could maybe clear them all at one shot.
For example, say that you have a structure with fields a - z.
data: begin of structure,
        fielda type c,
        fieldb type c,
        fieldc type c,
        fieldz type c,
        end of structure.
So in your program, it is now important for you to clear these fields, if you would have defined them one by one without the structure, you would have to list them all in your CLEAR statement, but instead, since you have them in a structure, you can some say....   CLEAR STRUCTURE.
Regards,
Rich Heilman

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

http://support.apple.com/kb/TS2005
http://support.apple.com/kb/HT1861
https://ssl.apple.com/support/proapps/serialnumbers/

How to use one report column into the another report in obiee

How to use one report column into the another report in obiee

i dont want to use column as a filter for another report it should be report column for another report
Thanks,
Vivek

I use global structure in another report how can i make it local ?

i use global structure in another report how can i make it local ?

Naresh,
Right click on structure and choose remove reference. Then you can add new fields, and this structure is local.
Hope it Helps
Srini

How to use one commandButton to execute two tasks in JSF

I have a form in JSF page which contains different faces components. These faces bind to ADF BC to insert one row in the database when the user press commandButton. Also I need to bind the value of one inputText in that form to managed bean to execute another task in the application when the user press the same commandButton.
The code of the inputText:
<h:inputText value="#{bindings.ProjectNumber.inputValue}"
id="pn"
size="10"
required="#{bindings.ProjectNumber.mandatory}">
The code of commandButton:
<h:commandButton actionListener="#{bindings.Commit.execute}"
value="Save"
disabled="#{bindings.Commit.actionEnabled}"/>
The managed bean is �findInspector�. I tried to insert inputHidden inside commandButton tag and assign the value of the inputText to the inputHidden as follows:
<h:commandButton actionListener="#{bindings.Commit.execute}"
value="Save"
disabled="#{bindings.Commit.actionEnabled}">
<h:inputHidden value="#{bindings.ProjectNumber.inputValue}" binding="#{findInspector.project}"/>
</h:commandButton>
But it was not work
Please how can I write the code to use the value of the inputText more than one time in the JSF(one to insert one row by using ADF BC and another to use the same value to bind to a managed bean) and how to use one commandButton to execute two tasks in JSF.
Thank you
Waheed

Just dopublic void execute() {
anotherAction(inputValue);
I guess those articles might be interesting about passing params and the usage of inputHidden and also about using datatables:
http://balusc.xs4all.nl/srv/dev-jep-com.html
http://balusc.xs4all.nl/srv/dev-jep-dat.html

How to use one commandButton to execute two task in JSF

I have a form in JSF page which contains different faces components. These faces bind to ADF BC to insert one row in the database when the user press commandButton. Also I need to bind the value of one inputText in that form to managed bean to execute another task in the application when the user press the same commandButton.
The code of the inputText:
<h:inputText value="#{bindings.ProjectNumber.inputValue}"
id="pn"
size="10"
required="#{bindings.ProjectNumber.mandatory}">
The code of commandButton:
<h:commandButton actionListener="#{bindings.Commit.execute}"
value="Save"
disabled="#{bindings.Commit.actionEnabled}"/>
The managed bean is “findInspector”. I tried to insert inputHidden inside commandButton tag and assign the value of the inputText to the inputHidden as follows:
<h:commandButton actionListener="#{bindings.Commit.execute}"
value="Save"
disabled="#{bindings.Commit.actionEnabled}">
<h:inputHidden value="#{bindings.ProjectNumber.inputValue}" binding="#{findInspector.project}"/>
</h:commandButton>
But it was not work
Please how can I write the code to use the value of the inputText more than one time in the JSF(one to insert one row by using ADF BC and another to use the same value to bind to a managed bean) and how to use one commandButton to execute two task in JSF.
Thank you
Waheed

Yes I did
<managed-bean>
<description>The bean for get project No</description>
<managed-bean-name>projectBean</managed-bean-name>
<managed-bean-class>
mcscm.model.ProjectBean
</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
<managed-property>
<property-name>bindings</property-name>
<value>#{bindings}</value>
</managed-property>
</managed-bean>
Also I changed the method in the managed bean as follows:
public String commandButton_action() {
FacesContext fctx = FacesContext.getCurrentInstance();
ValueBinding vb = fctx.getApplication().createValueBinding("#{bindings}");
DCBindingContainer dcb = (DCBindingContainer) vb.getValue(fctx);
OperationBinding operation = (OperationBinding) dcb.get("projectNumber");
operation.execute();
return null;
where projectNumber is my method in the java class of the application module "TaskInformationImpl". I made this method to be accessed from outside of ADF BC.
I just create a sample code for projectNumber method for testing only as:
public void projectNumber (String data){
System.out.print(data);
In the page Pagedef file I added this :
<methodAction id="projectNumber"
InstanceName="TaskInformationDataControl.dataProvider"
DataControl="TaskInformationDataControl"
MethodName="projectNumber" RequiresUpdateModel="true"
Action="999" IsViewObjectMethod="false">
<NamedData NDName="data" NDValue = "#{bindings.ProjectNumber.inputValue}" NDType="java.lang.String"/>
After I did all of this I get a new error like:
javax.faces.FacesException: #{projectBean.commandButton_action}: javax.faces.el.EvaluationException: java.lang.ClassCastException: oracle.adfinternal.view.faces.model.binding.FacesCtrlAttrsBinding cannot be cast to oracle.adf.model.OperationBinding
Is it very difficult to do this in JDeveloper?. yes ADF BC provide me a lot of facilities, but when I want to do a specific task I face a lot of troubles

How to use advanced tab in user reports?

Hi,
How to use "advanced" tab in user reports?
I have two reports. I fill "Report ID" in both and then I can push "Add Report" and fill fields property.
Then I'm can "drill" from one report to another on right click, but how to pass parameters?
Is it even possible?
Regard
Libor

Thank you for reply.
I can't get it working.
I have two reports:
1. report:
Name: test
SQL: select 1 NUM, 'text' TEXT from dual;
On advanced tab:
ReportID: -null-
Name: test2
Report: Test2
2. report
Name: test2
SQL: select :NUM from dual;
Now, when I run the first report and click do right click on a row and select TEST2
from popup menu, it navigates to the second report test2, but WITHOUT actual value
from NUM column from first report.
I'm using latest version of SQL Developer (1.1.1.25) and I like reports.
With this feature it would be even better.
Regards
Libor

How to use views in sql script report?

All all
Can any one tell how to use views in sql script report?

Most of the views are based on tables (or other views which are based on tables).
The view typically shows one org at a time based on the context that is set.
If you need records for all orgs, you need to use the underlying tables. Oracle typically names the tables with a _all suffix.
e.g. PO_HEADERS will show records for one org at a time. PO_HEADERS_ALL will show records for all orgs.
Hope this answers your question,
Sandeep Gandhi

How to use dynamic parameter when a report is created using Stored Procedures

Hi all,
any one have the idea of how to use dynamic parameter in crystal report XI R2
when report is created using Stored Procedure.
Regards
shashi kant chauhan

Hi
You can create an SQL command in Database Expert > Expand your datasource > Add command
Then enter the SQL query that will create the list of values to supply to the user
eg select field1,field2 from table
Then edit the parameter of the report. These will be the SP parameters adn can be seen in field explorer.
Change the parameter type to Dynamic
Under the word Value click on Click here to add item
Scroll down to your Command and select one of the values that you want to appear in the list
e.g field1
Then click on the Parameters field - this is essential to create the param
You can edit other options as required
That should do it for you.
I must say that i use CR 2008 connected to Oracle 10g SP, but i reckon this will work for SQL DB and CR XI as well
Best of luck

How to use 'UNION' between two different databaseservers

Hello,
Could someone help me out. I am trying to find out if and how to use 'UNION' between two different databaseservers.
We have 2 different queries, each queries on a different database; one MySQL the other MSSQL.
Could someone tell me how to use 'UNION' between thes 2 queries?
Thanks in advance,
Samir Benalla

Hello
You may use openrowset statement, (OPENROWSET (Transact-SQL))., but before you use this, you must configure your server
sample:
SELECT a.*
FROM OPENROWSET('SQLNCLI', 'Server=Seattle1;Trusted_Connection=yes;',
     'SELECT GroupName, Name, DepartmentID
      FROM AdventureWorks2012.HumanResources.Department
      ORDER BY GroupName, Name') AS a
UNION
     SELECT GroupName, Name, DepartmentID
      FROM AdventureWorks2012.HumanResources.Department
      ORDER BY GroupName, Name
With this you can define a connection using native client to server Seattle1, and execute a query there, The results will be spooled on your server.
Connectionstring
Server=[SERVER_NAME];datasource=[YOUR DATABASE NAME];user_id=sa;password=sapassword'
if you use FQDN on your Query, than the datasource parameter in connection string can be letf out.
Regards
János.
take care of performance, it can be very slow,

How to use one email adress for multiple recipients

Hello,
I'd like to know how to use one email adress for multiple recipients.
this would be very useful or projects. for example;
if i send one mail to [email protected], all people in this project get an email.
I will add the people in this project myself.
I know it is possible, but I don't know how to do it ;-)
please help me!

Hope this help.
_http://technet.microsoft.com/en-us/library/cc164331(v=exchg.65) .aspx

How to use the structure in the EXIT_SAPMM06E_013 function module

Hello Experts,
Please guide me how to use the structure defined in function modules under table tab in the driver program for smart form to fetch the data. Please post some sample code if available.
Best Regards,
Sandesh.Sreyamsh

Can you please elaborate little bit more what is the actual requirement?

How to use intractive list in Alv REPORT

how to use intractive list in Alv REPORT with example.
thangs
venki.......

Hi
using the USER_COMMAND we can move to the Secondary(interactive) list in the ALV
see the sample code
report yh645_secndry_alv.
type-pools: slis.
data: fieldcat type slis_t_fieldcat_alv,
fieldcat_ln like line of fieldcat,
fs_layout type slis_layout_alv,
t_layoout like standard table
of fs_layout.
data: begin of fs_spfli,
carrid type spfli-carrid,
connid type spfli-connid,
countryfr type spfli-countryfr,
cityfrom type spfli-cityfrom,
airpfrom type spfli-airpfrom,
countryto type spfli-countryto,
cityto type spfli-cityto,
airpto type spfli-airpto,
fltime type spfli-fltime,
deptime type spfli-deptime,
arrtime type spfli-arrtime,
distance type spfli-distance,
distid type spfli-distid,
fltype type spfli-fltype,
period type spfli-period,
checkbox,
color(3),
end of fs_spfli.
data:
begin of fs_table,
carrid type spfli-carrid,
connid type spfli-connid,
end of fs_table.
data: begin of fs_sflight,
check,
color(3).
include type sflight.
data:end of fs_sflight.
data:
begin of fs_table1,
carrid type sflight-carrid,
connid type sflight-connid,
fldate type sflight-fldate,
end of fs_table1.
data:
t_spfli like standard table
of fs_spfli.
data:
t_table like standard table
of fs_table.
data:
t_table1 like standard table
of fs_table1.
data:
t_sflight like standard table
of fs_sflight.
data:
t_sbook like standard table
of sbook.
data t_layout type slis_layout_alv.
select *
into corresponding fields of table t_spfli
from spfli.
perform start_list_viewer.
perform get_spfli_details.
*& Form SUB1
text
-->RT_EXTAB text
form sub1 using rt_extab type slis_t_extab.
data: flight type slis_extab.
flight-fcode = 'SFLIGHT'.
append flight to rt_extab.
set pf-status 'SFLIGHT'. " EXCLUDING RT_EXTAB.
endform. "SUB1
*& Form START_LIST_VIEWER
text
--> p1 text
<-- p2 text
form start_list_viewer .
data: pgm like sy-repid.
pgm = sy-repid.
fs_layout-box_fieldname = 'CHECKBOX'.
fs_layout-info_fieldname = 'COLOR'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_callback_pf_status_set = 'SUB1'
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'SPFLI'
is_layout = fs_layout
tables
t_outtab = t_spfli
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " START_LIST_VIEWER
*******Process Call Back Events (Begin)**************************
form user_command using ucomm like sy-ucomm
selfield type slis_selfield.
case ucomm.
when 'SFLIGHT'.
selfield-refresh = 'X'.
perform get_spfli_details.
select *
from sflight
into corresponding fields of table t_sflight
for all entries in t_table
where carrid eq t_table-carrid
and connid eq t_table-connid.
perform display_sflight.
when 'SBOOK'.
selfield-refresh = 'X'.
perform get_sflight_details.
select *
from sbook
into corresponding fields of table t_sbook
for all entries in t_table1
where carrid eq t_table1-carrid
and connid eq t_table1-connid
and fldate eq t_table1-fldate.
perform display_sbook.
endcase.
endform. "USER_COMMAND
*& Form SUB2
text
-->RT_EXTAB text
form sub2 using rt_extab type slis_t_extab.
data: flight type slis_extab.
flight-fcode = 'SBOOK'.
append flight to rt_extab.
set pf-status 'SBOOK'. " EXCLUDING RT_EXTAB.
endform. "SUB2
*& Form DISPLAY_SFLIGHT
text
--> p1 text
<-- p2 text
form display_sflight .
data: pgm like sy-repid.
pgm = sy-repid.
clear t_layout.
fs_layout-box_fieldname = 'CHECK'.
fs_layout-info_fieldname = 'COLOR'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_callback_pf_status_set = 'SUB2'
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'SFLIGHT'
is_layout = fs_layout
tables
t_outtab = t_sflight
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_SFLIGHT
*& Form GET_SPFLI_DETAILS
text
--> p1 text
<-- p2 text
form get_spfli_details .
loop at t_spfli into fs_spfli.
if fs_spfli-checkbox = 'X'.
fs_spfli-color = 'C51'.
fs_spfli-checkbox = '1'.
fs_table-carrid = fs_spfli-carrid.
fs_table-connid = fs_spfli-connid.
append fs_table to t_table.
modify t_spfli from fs_spfli.
endif.
endloop.
endform. " GET_SFLIGHT_DETAILS
*& Form GET_SFLIGHT_DETAILS
text
--> p1 text
<-- p2 text
form get_sflight_details .
loop at t_sflight into fs_sflight.
if fs_sflight-check = 'X'.
fs_sflight-color = 'C71'.
fs_sflight-check = '1'.
fs_table1-carrid = fs_sflight-carrid.
fs_table1-connid = fs_sflight-connid.
fs_table1-fldate = fs_sflight-fldate.
append fs_table1 to t_table1.
modify t_sflight from fs_sflight.
endif.
endloop.
endform. " GET_SFLIGHT_DETAILS
*& Form DISPLAY_SBOOK
text
--> p1 text
<-- p2 text
form display_sbook .
data: pgm like sy-repid.
pgm = sy-repid.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_structure_name = 'SBOOK'
tables
t_outtab = t_sbook
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_SBOOK
Reward points for useful Answers
Regards
Anji

How to use a parameter of a report program in a dialog program

how to use a parameter of a report program in a dialog program.
I have to fetch the value entered in the parameter of report program and display it in a dialog program

Hi Aasim,
Just mention like below in your ABAP report.
PARAMETERS: p_aufnr TYPE aufnr MEMORY ID ord.
and mention the same memory ID name in the module pool screen property it automatically populates the value to and fro

How to use one structure in different reports

Similar Messages

Maybe you are looking for