How to use Order by in ODI

Hello Friends,
We are extracting data from oracle table to Essbase target, we need to in-corporate Order By clause on source while extracting data.
Ex: Select xxxx, WEEK_NUM from aaaaa
where xxxx = yyy
ORDER BY WEEK_NUM asc
Can you suggest how to do this?
Thanks.

Hi Can you please check the below thread
Sorting or Order By on ODI
may be this what you looking for.

Similar Messages

How to use order by within Group by clause

Hi All,
I need a help as to how should i use the Order by clause so that the data should be in order with respect to one column, and at the same time whole data is grouped by some other column...like
Select RaceNo,Venue,FP,BP from Race group by RaceNo
Here I want to order by FP in ascending order for each group. When i am using it , whole order is changing.
Can anybody suggest me how to use order by clause that would apply to each group of data.
Thanks .

order by clause should be used at the last in any query.......but in group by clause u can't use use that becoz u group according to column then no ordering is needed there......if u want to filter something then u can use having clause and later if u need to arrange then u can use order by clause.........
i hope this eg.l gives u some clarification....
e.g
select deptno,count(empno)
from dept
group by deptno
having count(empno) > 10
order by deptno

How to use order by in stored procedure base block?

How to use order by in stored procedure base block? I need to change order by dynamically

Use SET_BLOCK_PROPERTY('BLOCK_NAME',ORDER_BY,'COLUMN_NAME1, COLUMN_NAME2');

How to use GROUP BY in ODI

how to use GROUP BY in ODI tool

Hi ,
you can combine the insert stamt with the select ....so that in the target u will get a single line .....
SQL> select * from prop_details;
PROPERTY RELAVANTD NOTICES
10100 25-JAN-09 30
10100 03-JAN-09 30
10100 02-DEC-08 20
10100 01-DEC-08 10
10100 31-DEC-08 20
10101 10-JAN-09 10
10101 20-JAN-07 15
10101 30-DEC-08 45
10101 20-FEB-08 35
10101 31-JAN-09 25
10 rows selected.
SQL> select PROPERTY,max(RELAVANTDATE),SUM(NOTICES) from PROP_DETAILS GROUP BY P
ROPERTY;
PROPERTY MAX(RELAV SUM(NOTICES)
10101 31-JAN-09 130
10100 25-JAN-09 110
SQL>

How to use dual table in ODI in source side for nested queries?

Hi,
Any idea how to use dual table in source for more than once. I want to build a ODI interface for the following source query
SELECT ACTV_TYP.ACTV_TYP_SRC_CD, ACTV_TYP.ACTV_TYP, PORT_ACTV_TYP.PORT_ACTV_TYP_SRC_CD, PORT_ACTV_TYP.PORT_ACTV_TYP, SFT_DLT_STS.SFT_DLT_STS_SRC_CD, SFT_DLT_STS.SFT_DLT_STS
FROM
SELECT LOW_VALUE PORT_ACTV_TYP_SRC_CD, MEANING PORT_ACTV_TYP
FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
WHERE TABLE_NAME = 'BRKR_PORTS'
AND COLUMN_NAME = 'WORK_PORT_TYPE') PORT_ACTV_TYP,
(SELECT LOW_VALUE SFT_DLT_STS_SRC_CD, MEANING SFT_DLT_STS
FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
WHERE TABLE_NAME = 'BANKS'
AND COLUMN_NAME = 'REC_STATUS') SFT_DLT_STS,
(SELECT 1 ACTV_TYP_SRC_CD, '?????' ACTV_TYP FROM DUAL
UNION ALL
SELECT 2 ACTV_TYP_SRC_CD, '???????' ACTV_TYP FROM DUAL) ACTV_TYP
Regards

If the below query is equivalent , it seems you don't need dual table at all , just default the values in the interface.
You are using dual tables to populate values ACTV_TYP.ACTV_TYP_SRC_CD, ACTV_TYP.ACTV_TYP values. Look at your query in the following manner :
SELECT '1', '?????', PORT_ACTV_TYP.PORT_ACTV_TYP_SRC_CD, PORT_ACTV_TYP.PORT_ACTV_TYP, SFT_DLT_STS.SFT_DLT_STS_SRC_CD, SFT_DLT_STS.SFT_DLT_STS
FROM
SELECT LOW_VALUE PORT_ACTV_TYP_SRC_CD, MEANING PORT_ACTV_TYP
FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
WHERE TABLE_NAME = 'BRKR_PORTS'
AND COLUMN_NAME = 'WORK_PORT_TYPE') PORT_ACTV_TYP,
(SELECT LOW_VALUE SFT_DLT_STS_SRC_CD, MEANING SFT_DLT_STS
FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
WHERE TABLE_NAME = 'BANKS'
AND COLUMN_NAME = 'REC_STATUS') SFT_DLT_STS
UNION
SELECT 2 , '??????', PORT_ACTV_TYP.PORT_ACTV_TYP_SRC_CD, PORT_ACTV_TYP.PORT_ACTV_TYP, SFT_DLT_STS.SFT_DLT_STS_SRC_CD, SFT_DLT_STS.SFT_DLT_STS
FROM
SELECT LOW_VALUE PORT_ACTV_TYP_SRC_CD, MEANING PORT_ACTV_TYP
FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
WHERE TABLE_NAME = 'BRKR_PORTS'
AND COLUMN_NAME = 'WORK_PORT_TYPE') PORT_ACTV_TYP,
(SELECT LOW_VALUE SFT_DLT_STS_SRC_CD, MEANING SFT_DLT_STS
FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
WHERE TABLE_NAME = 'BANKS'
AND COLUMN_NAME = 'REC_STATUS') SFT_DLT_STS
Now you can use dataset to make UNION.

How to use "Order by" clause dynamically on LOV values in 10g r2 forms

Hi ,
I have following requirement,please guide me.
1 Create a List Of Values with 2 fields, Code and Description
2. Do not use order by clause in record Group Query
3. Attach this LOV to a field in Form
4. When user invokes the LOV user will see two fields in LOV with header as Code and Description
5. Now when user clicks on Column Header “Code” then LOV should be sorted on Code
6. And if User clicks on Column Header “Description” then LOV should be sorted on Description
Thanks in Advance.

Kindly post this problem in this forum ->
[Forms Forum|http://forums.oracle.com/forums/forum.jspa?forumID=82]
And, close this thread by marked it as answered. ;)
Regards.
Satyaki De.

How to use Update Statement in ODI Procedure

Hi,
How can I use an update statement inside an ODI procedure.
Thanks

Hi,
You do not need the BEGIN and END. ODI procedures are free text, so you can simply write your update statement, as you would in toad/sql developer etc etc. Just make sure you set the Technology and the logical schema. It is how ever best practice to also use the API:
<%=odiRef.getSchemaName("YOUR_LOGICAL_SCHEMA_NAME", "D")%>. to prefix tables. This way, you select data from different schema's in the same instance (as long a your user has the correct privs).
Cheers
Bos
Edited by: Bos on Jun 22, 2011 3:09 PM

How to use oracle partition in ODI

hi all,
i have a oracle database with daily partition. partition syntex is tbl_abc partition(20090909), now i want to use it in interface..
kindly tell the way...
Regard
Naseer

Hi Naseer,
How are you?
ODI doesnt support partition. You can do a work around for that by creating a VIEW out of that partition name, reverse it in ODI and use that as a source.
Like,
CREATE TABLE sales_range
(salesman_id NUMBER(5),
salesman_name VARCHAR2(30),
sales_amount NUMBER(10),
sales_date DATE)
PARTITION BY RANGE(sales_date)
PARTITION sales_jan2000 VALUES LESS THAN(TO_DATE('02/01/2000','DD/MM/YYYY')),
PARTITION sales_feb2000 VALUES LESS THAN(TO_DATE('03/01/2000','DD/MM/YYYY')),
PARTITION sales_mar2000 VALUES LESS THAN(TO_DATE('04/01/2000','DD/MM/YYYY')),
PARTITION sales_apr2000 VALUES LESS THAN(TO_DATE('05/01/2000','DD/MM/YYYY'))
create view sales_jan200 as select * from sales_range PARTITION (sales_jan2000);
Makes sense?
Thanks,
G

How to use useMaxValue property in ODI for XML?

Hello All,
I am using 11.1.1.5 version of ODI. I want to use "useMaxValue" for which description is given as follows by oracle.
When this property is set to true, elements for which maxOccurs is not specified in the XSD are considered as maxOccurs ="unbounded". Otherwise, the driver assumes that maxOccurs=1 when maxOccurs is not specified.
when I use this property as useMaxValue in the JDBC url for XML technology I get the following error.
ODI-1227: Task SrcSet0 (Loading) fails on the source XML connection XML FILE.
Caused By: java.sql.SQLException: ODI-40717: Unknown parameter : usemaxvalue
I am trying to get multiple records for the same elements in XML for this I am using this property. Is there any other way to get it done?
Thanks in Advance!

please try uimv or useimplicitmaxvalue. I justed tried, both works well. I will file a doc bug to track the issue, maybe document need change, maybe code, waiting bug updates.
Edited by: tina.wang on Oct 7, 2012 9:28 AM

How to use "full join" in ODI interface

I need to join two tables using full join. So, when I drag and drop table columns (build join) and mark left and right join (get full join):
+(All rows of OSS_NCELLREL (OSS_NCELLREL) including the rows unpaired with OSS_NECELASS (OSS_NECELASS) rows and all rows of OSS_NECELASS (OSS_NECELASS) incuding the rows unpaired with OSS_NCELLREL (OSS_NCELLREL)+
I get the following error:
Source panel of the diagram: Clause set to full join on a technology that does not support full joins
I use Oracle DB tables in the same DB.
Help! What I do wrong?

Hi,
You need to work around Topology Manager.
Please follow the below steps,
1. Edit the 'Oracle' technology from the Physical Architecture treeview.
2. In the Technology Defintion Tab select 'Ordered (Sql ISO)' radio button.
3. In the Technology 'SQL Tab' set the following:
- Clause Location: From
- Brackets supported in the ON clauses: check
- Inner: check, type INNER JOIN
- Cross: check, type CROSS JOIN
- Left Outer: check, type LEFT OUTER JOIN
- Right Outer: check, type RIGHT OUTER JOIN
- Full Outer: check, type FULL OUTER JOIN
PS: Please take a backup Oracle techno before editing. ;)
Thanks,
G
Edited by: Gurusank on Nov 27, 2008 9:05 PM

SQL Override. How to use custom SQL in ODI?

I am new to ODI & have an Informatica background. I am looking for an SQL override capability in ODI. I have an existing SQL which has complex joins, in-line queries, filters, unions & many other complexities. The query reads many existing tables & output 5 fields, which I need to populate in the target table. In Informatica, I would simply create a Target table of these 5 fields, import the same table as both source & target, & then override the source qualifier with the existing SQL. Does ODI have a similar feature?
I know that the same can be achieved using core ODI features, but I am trying to get it done quickly without re-inventing the wheels.
Thanks,
Dinesh.

Dinesh
you can not use SQL over-ride feature which informatica has. I am an informatica developer myself. So I can feel your pain. You are gonna miss a lot of features Informatica has. the one you are looking can not be done using ODI Interfaces. But can be done using ODI Procedures. When you create a step in Procedure you would mention the Source and target schema informations/Context Logical Schema info which should do the work for you. If your source and targets are in different Server then create a DBlink between two servers. Now when you put your select query in it put it like an insert query.

How to use order by with hierarchical query

I have a hierarchical query basically it brings back an organization chart. We start with a manager's id, get all that person's employees. If any of the employees is also a manager I want to get that person's employees and return them right after that person. I won't bother with the whole query but relevant part is:
       START WITH em.mgr_id = pi_mgr_id
      CONNECT BY nocycle PRIOR em.emp_id = em.mgr_id;Where pi_mgr_id is a parameter passed to the procedure and em is the alias for the emp_mgr_relationship table which contains emp_id and mgr_id. This works fine. What I want now is for the employees who work for the same manager to appear in name order. The table which contains the employee names is aliased as pe and the name column is called name1. I added the following:
       START WITH em.mgr_id = pi_mgr_id
      CONNECT BY nocycle PRIOR em.emp_id = em.mgr_id
        order by pe.name1;But that put the entire list in name order. What I want is for employees who work for the same manager to be in name order. Let's the manager whose organization I want is named Frank. What I'd like to get is this
EMP_NAME    MGR_NAME
Allen       Frank
Beth        Frank
Alex        Beth
Charles     Beth
Ed          Beth
Dean        Frank
George      Frank
Benny       George
David       George
Sam         George
Dan         Sam
Harry       Sam
John        Sam
Terry       George
James       Frank
Ken         Frank
Mike        Ken
Warren      KenHow do I get the list in this order?
Edited by: kendenny on Jul 28, 2010 7:31 AM

Make use of ORDER SIBLINGS clause in hierarchial queries to set the order by child columns.
START WITH em.mgr_id = pi_mgr_id
      CONNECT BY nocycle PRIOR em.emp_id = em.mgr_id
        *order siblings by name1;*

How to use generic action in ODI?

I create new Action (Topology.Generic Action), for example, "DELETE TABLE", that contains 1. <%=odiRef.disableReferringFKs( )%> and 2. DELETE FROM ...
If I want to perform this Action for any table before load data, what must I do?
Where can I perform this in ODI? May be in Packages or in "Generic DDL" for model?
I couldn't find this information((

Hi Pani,
my experience is that you can best use a procedure to do table deletions on either your source, staging or target schema.
view the oracle users guide / reference guide for details.
Where to perform? In the designer, create a project, open the first folder and there you'll find the procedures.
Right click it and insert a procedure. But again, check the docs, which I believe are delivered with your installation.
By the way, you can add the procedure in a package to have it executed before any other steps start.
Good luck!
Rudy Oosterling
Edited by: user10081313 on 21-jan-2010 7:54

How to use encoded password in ODI SDK

Dear Experts,
I found one problem in case of ODI SDK while implementing it in eclipse. As everybody knows we are hardcoding the database credentials, DBA is not interested to share the password easily.If we could implement this in such a way like we are using encoded password for configuring agent then it may be much better for everyone.
yes of course we can create one file that can contains the credentials but at the end someone can print it in console by reading line by line. Is it possible to develop one algorithm that can ensure to use the password safely (like encoded one).
Need your valuable suggestion on the same.
Thanks

Hi-
Yes it is possible by the way of KM custamization, You need to modify LKM call sqlldr via jython step to pass the user info and password as variable instead of ODI method. Try this command in your KM step:
userid=#GLOBAL.user/#GLOBAL.psw
Hope this will work for you.
Thanks,
Saravanan Rajavel

How can i use Order by inside a sub query in Oracle

Hi!,
Please help me, it's an urgent... how can i use Order by clause
SELECT SalesProductKeyID,ActualUnitPrice,BillDateKeyID,ProductKeyID
,Qty,Profit,DD.dDate
, (SELECT nvl(S.Qty,0) FROM Stock S , DateDimension DD1
WHERE S.DateKeyID = DD1.DateKeyID AND
S.ProductKeyID = SF.ProductKeyID AND
DD1.dDate <= DD.dDate and rownum=1
ORDER BY DD1.dDate DESC*) as StockQty
, (SELECT nvl(SUM(Qty),0) from salesfact SF2,DATEDIMENSION DD2
WHERE SF2.BillDateKeyID=DD2.DatekeyID AND SF2.ProductKeyID=SF.ProductKeyid
AND DD2.dDate > DD.dDate
AND DD2.dDATE=DD.dDate
) as TotalQtySold
FROM SalesFact SF INNER JOIN DATEDIMENSION DD
ON SF.billdatekeyid =DD.Datekeyid
WHERE
IsProfitCalculated = 1 AND
IsSalesFactSuppPopulated =0 AND
Qty > 0;
kindly help
Thank you.

Actually I'm converting Procedures from SQL Server to Oracle.
Actual Stored Procedure in SQL Server is as follows.
SELECT --top 10000
SalesProductKeyID,ActualUnitPrice,BillDateKeyID,ProductKeyID
,Qty,Profit,DD.Date
, (SELECT TOP 1 ISNULL(S.Qty,0) FROM dbo.Stock S , dbo.DateDimension DD1
WHERE S.DateKeyID = DD1.DateKeyID AND
S.ProductKeyID = SF.ProductKeyID AND
DD1.Date <= DD.Date
ORDER BY DD1.Date DESC) as StockQty
, (SELECT ISNULL(SUM(Qty),0) from salesfact SF2,DATEDIMENSION DD2
WHERE SF2.BillDateKeyID=DD2.DatekeyID AND SF2.ProductKeyID=SF.ProductKeyid
AND DD2.Date > DD.Date
AND DD2.DATE=DD.Date
) as TotalQtySold
--INTO TEMP_Salesfact
FROM dbo.SalesFact SF INNER JOIN DATEDIMENSION DD
ON SF.billdatekeyid =DD.Datekeyid
WHERE
IsProfitCalculated = 1 AND
IsSalesFactSuppPopulated =0 AND
Qty > 0

How to use Order by in ODI

Similar Messages

Maybe you are looking for