How to use order by with hierarchical query

I have a hierarchical query basically it brings back an organization chart. We start with a manager's id, get all that person's employees. If any of the employees is also a manager I want to get that person's employees and return them right after that person. I won't bother with the whole query but relevant part is:
       START WITH em.mgr_id = pi_mgr_id
      CONNECT BY nocycle PRIOR em.emp_id = em.mgr_id;Where pi_mgr_id is a parameter passed to the procedure and em is the alias for the emp_mgr_relationship table which contains emp_id and mgr_id. This works fine. What I want now is for the employees who work for the same manager to appear in name order. The table which contains the employee names is aliased as pe and the name column is called name1. I added the following:
       START WITH em.mgr_id = pi_mgr_id
      CONNECT BY nocycle PRIOR em.emp_id = em.mgr_id
        order by pe.name1;But that put the entire list in name order. What I want is for employees who work for the same manager to be in name order. Let's the manager whose organization I want is named Frank. What I'd like to get is this
EMP_NAME    MGR_NAME
Allen       Frank
Beth        Frank
Alex        Beth
Charles     Beth
Ed          Beth
Dean        Frank
George      Frank
Benny       George
David       George
Sam         George
Dan         Sam
Harry       Sam
John        Sam
Terry       George
James       Frank
Ken         Frank
Mike        Ken
Warren      KenHow do I get the list in this order?
Edited by: kendenny on Jul 28, 2010 7:31 AM

Make use of ORDER SIBLINGS clause in hierarchial queries to set the order by child columns.
START WITH em.mgr_id = pi_mgr_id
CONNECT BY nocycle PRIOR em.emp_id = em.mgr_id
*order siblings by name1;*

Similar Messages

How to use LIKE Operator with my query requriment

HI all,
I have a requirement as follows
EMPID ENAME JOB SAL
10 RAJ KAMAL MANAGER 25000
20 KAMAL RAJ NAYAK CLERK 4000
30 NARENDAR GUPTA ANALYST 20000
40 ASHUTOSH GUPTA DEVELOPER 10000
50 ASHUTOSH NAYAR PROGRAMMER 15000
i am searching enames such that i need to get the whole name even if i search with just a single LETTER/WORD immaterial of the order they exist in the name for which i need to get the whole name.(INFACT WORD comparision)
ex:
1) select * from emp where ename like '%ka%'
i am getting:
10 RAJ KAMAL MANAGER 25000
20 KAMAL RAJ NAYAK CLERK 4000
This is not what i need i need just word camparision not letters comparision let me tell you...
select * from emp where ename like '%amal%'
Even for this query ill get the same output.. this is not my option to go..
I need just word comparision with starting letter and immaterial of the word position in the name
If it is possible to do with query please let me know..
Thanking you
Narendar Vishwanatham

Full example:
SQL> ed
Wrote file afiedt.buf
1 with e as (select 10 as empid, 'RAJ KAMAL' as ename, 'MANAGER' as job, 25000 as sal from dual union all
2             select 20, 'KAMAL RAJ NAYAK', 'CLERK', 4000 from dual union all
3             select 30, 'NARENDAR GUPTA', 'ANALYST', 20000 from dual union all
4             select 40, 'ASHUTOSH GUPTA', 'DEVELOPER', 10000 from dual union all
5             select 50, 'ASHUTOSH NAYAR', 'PROGRAMMER', 15000 from dual)
6 -- END OF TEST DATA
7 select *
8 from e
9* where regexp_like(ename,'(^| )KA( |$)')
SQL> /
no rows selected
SQL> ed
Wrote file afiedt.buf
1 with e as (select 10 as empid, 'RAJ KAMAL' as ename, 'MANAGER' as job, 25000 as sal from dual union all
2             select 20, 'KAMAL RAJ NAYAK', 'CLERK', 4000 from dual union all
3             select 30, 'NARENDAR GUPTA', 'ANALYST', 20000 from dual union all
4             select 40, 'ASHUTOSH GUPTA', 'DEVELOPER', 10000 from dual union all
5             select 50, 'ASHUTOSH NAYAR', 'PROGRAMMER', 15000 from dual)
6 -- END OF TEST DATA
7 select *
8 from e
9* where regexp_like(ename,'(^| )KAMAL( |$)')
SQL> /
     EMPID ENAME           JOB               SAL
        10 RAJ KAMAL       MANAGER         25000
        20 KAMAL RAJ NAYAK CLERK            4000
SQL>

How to use hint on with clause query

Hi all,
I have a query and it consits full of tabs with WITH clause. Top level I am just selecting all the tabs (queries with WITH clause) by saying select * from tab1,tab2,.....so on .
Now my question is If I want to use hint on my SQL can I use the same by using tab1,tab2...
tab1, tab2 are not actually tables ....each tab represents one SQL with WITH clause.
Please let me know if there is any confusion on my post.

What's stopping you from trying it yourself?
Post your results here to help others.

How to use order by within Group by clause

Hi All,
I need a help as to how should i use the Order by clause so that the data should be in order with respect to one column, and at the same time whole data is grouped by some other column...like
Select RaceNo,Venue,FP,BP from Race group by RaceNo
Here I want to order by FP in ascending order for each group. When i am using it , whole order is changing.
Can anybody suggest me how to use order by clause that would apply to each group of data.
Thanks .

order by clause should be used at the last in any query.......but in group by clause u can't use use that becoz u group according to column then no ordering is needed there......if u want to filter something then u can use having clause and later if u need to arrange then u can use order by clause.........
i hope this eg.l gives u some clarification....
e.g
select deptno,count(empno)
from dept
group by deptno
having count(empno) > 10
order by deptno

How to use union statement with declare & set function?

Hi Experts,
i have small query about how to use union statement with declare & set function?
Example as below :
DECLARE @name AS date
Declare @name2 AS date
/* SELECT FROM [2013].[dbo].[OINV] T0 */
/* WHERE */
SET @name = /* T0.DocDate */ '[%1]'
SET @name2 = /* T0.DocDate */ '[%2]'
select '2013',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2013.dbo.orct t1
inner join 2013.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2013.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2013.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2013].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between [%1] and [%2]
Union
/* SELECT FROM [2014].[dbo].[OINV] T0 */
/* WHERE */
SET @name = /* T0.DocDate */ '[%1]'
SET @name2 = /* T0.DocDate */ '[%2]'
select '2014',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2014.dbo.orct t1
inner join 2014.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2014.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2014.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2014].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between [%1] and [%2]

You have to create stored procedure in SQL only .
Like u must have create for Crystal .
You can execute procedure in query manager but you have to enter parameter manually..
example
Exec @Test '20140101' '20140501'
Every time user has to enter it manually in yyyymmdd format in case of date parameters.
Example
Create Proc [@Test]
as begin
DECLARE @name AS date
Declare @name2 AS date
/* SELECT FROM [2013].[dbo].[OINV] T0 */
/* WHERE */
select '2013',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2013.dbo.orct t1
inner join 2013.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2013.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2013.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2013].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between @Name and @Name2
Union
/* SELECT FROM [2014].[dbo].[OINV] T0 */
/* WHERE */
select '2014',t5.U_salmannm,t1.CardName,t2.sumapplied as CollectionAmount,t2.DcntSum ,t3.DocTotal as InvoiceTotal,
datediff(dd,t3.DocDate,t1.Docdate) as Days
from 2014.dbo.orct t1
inner join 2014.dbo.RCT2 t2 on t1.DocNum = t2.DocNum
left join 2014.dbo.oinv t3 on
t3.docentry = t2.baseAbs
inner join 2014.dbo.ocrd t4 on t1.Cardcode = t4.CardCode
inner join [2014].[dbo].[@CQ_RTSM] t5 on t4.U_BeatCode = t5.U_RoutCode
where t2.DcntSum <> 0.000000 and t3.DocDate between
between @Name and @Name2
end

How to use File Adapter with hierarchial Structure?

Hi,
How to use File Adapter with hierarchial Structure like..
Data:
--Header Details:
Line Item Details:
Data
Bcoz I am getting a Flatfile in a hierarchial way as shown below.
Header Details :1
Line Item a
Line Item b
Header Details :2
Line Item c
Line Item d
Kishore

Hey Kishore,
In order to create a structure you need to use the file with convertion mode on the sending communication channel of the file adapter.
check the link for the needed configuration paramters.
If the structure is more complexed you can use the Contetnt master(CM) from itemfield which allows to ceate XML file from complex flat files and more.
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm">File sender adapter</a>
If you have any question i'll be more than happy to assist.
Nimrod Gisis

How to use NODIM func with out it's values being rounded

I created a new calculated key figure in Query Designer 3.x, and used the function NODIM() - Value with out dimensions. When I use this function, the values are rounding off to the nearest value.
For example, I have a value 0.000075 US$, when I use NODIM function the value is displayed as 0.000080. Value is getting rounded to nearest value.
I tried using absolute value it did not work.
Can any one tell me how to use NODIM function with out it's value being rounded to nearest value.
Thanks,

Hi,
According to your description, you might want that "Notice" field has a default value when form is created and users can be able to change the value of that
field.
As a workaround, you can add an action rule in “Name” field via InfoPath to fill the default value in “Notice” field only when “Name” field is not blank and “Notice”
field is blank.
Settings of the rule are as below, you can modify it based on your need:
Here is a link about how to add an action rule in InfoPath form, you can use it as a reference:
https://support.office.microsoft.com/en-us/article/Add-rules-for-performing-other-actions-5322d726-b787-4e5f-8d37-ba6db68b451d?CorrelationId=8a64c12f-aa60-4d90-b1f9-a44fcc4e74b5&ui=en-US&rs=en-US&ad=US
Best regards
Patrick Liang
TechNet Community Support

How to use opus codec with pjsip library ?

how to use opus codec with pjsip library ?

Hi,
The pageDef in app B must have an entry for the method in order to access it. Just adding the adfjar isn't enough.
You need to go the bindings of the page in app B and add the method you want to access. Once the method is added you can access using the following code:
BindingContainer bindings = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding("getWeatherbyCityName");
Map map =operationBinding.getParamsMap();
map.put("theCityName", "Tokyo");
operationBinding.execute();
This should work.
Thanks,
Siddharth.

How to use track effects with new version of GarageBand

In the version of GarageBand before this one, you could access different effects that you could manage and apply to the different tracks. Each track had an area containing its set of effects that were either activated or deactivated. With this removed, i am not sure how to add those same kind of effects. I am aware of the new nobs that are provided in order to mix and edit trebles, bass, mid, etc., but i want to be able to add different effects such as voice transformer, flanger, chorus, speech enhancer, bit crusher, bass amp, track echo, track reverb, amplifier, etc. I desperately need help finding out how to do this, as this was a major part of my mixing and producing with GarageBand, and without these given effects, i do not feel as comfortable using GarageBand.

zachseiden wrote:
How to use track effects with new version of GarageBand
this may help:
http://www.bulletsandbones.com/GB/GBFAQ.html#replacemissingtrackeffectsgbv10
This FAQ entry offers a Minute GarageBand video tutorial
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to use Oracle partitioning with JPA @OneToOne reference?

Hi!
A little bit late in the project we have realized that we need to use Oracle partitioning both for performance and admin of the data. (Partitioning by range (month) and after a year we will move the oldest month of data to an archive db)
We have an object model with an main/root entity "Trans" with @OneToMany and @OneToOne relationships.
How do we use Oracle partitioning on the @OneToOne relationships?
(We'd rather not change the model as we already have millions of rows in the db.)
On the main entity "Trans" we use: partition by range (month) on a date column.
And on all @OneToMany we use: partition by reference (as they have a primary-foreign key relationship).
But for the @OneToOne key for the referenced object, the key is placed in the main/source object as the example below:
@Entity
public class Employee {
@Id
@Column(name="EMP_ID")
private long id;
@OneToOne(fetch=FetchType.LAZY)
@JoinColumn(name="ADDRESS_ID")
private Address address;
EMPLOYEE (table)
EMP_ID FIRSTNAME LASTNAME SALARY ADDRESS_ID
1 Bob Way 50000 6
2 Sarah Smith 60000 7
ADDRESS (table)
ADDRESS_ID STREET CITY PROVINCE COUNTRY P_CODE
6 17 Bank St Ottawa ON Canada K2H7Z5
7 22 Main St Toronto ON Canada L5H2D5
From the Oracle documentation: "Reference partitioning allows the partitioning of two tables related to one another by referential constraints. The partitioning key is resolved through an existing parent-child relationship, enforced by enabled and active primary key and foreign key constraints."
How can we use "partition by reference" on @OneToOne relationsships or are there other solutions?
Thanks for any advice.
/Mats

Crospost! How to use Oracle partitioning with JPA @OneToOne reference?

How to use my itunes with a new pc

how to use my itunes with a new pc?

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
tt2

How to use the namespace with a parser?

I want to use the namespace in my project. For this reason, I use a sample
from
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/sax/7b_pe.html
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/dom/5_ns.html
to test my understanding.
The slideshow2.dtd refer to the definition in 'xhtml.dtd'. Because in these
two files, they all use the 'title' as the element names. To solve these
conflicts, The namespace is used to qualified the one in slideshow2.dtd.
But the parser still complain that the 'title' in slideshow2.dtd is declared
more than once.
I use apache's Xerces.
I want to know if Xereces realy support namespace spec. now, or how to use
the namespace with a parser. Can anyone kindly tell me where to find some
material that demo the use of namespace in Java program.
Thanks for any help!!!
#############FILE: slideshow2.dtd ###############
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT slideshow (slide+)>
<!ELEMENT slide (title?, item*)>
<!ENTITY % xhtml SYSTEM "xhtml.dtd">
%xhtml;
<!ELEMENT title (#PCDATA)*>
<!ATTLIST title
xmlns CDATA #FIXED "http://www.example.com/slideshow"
>
<!ELEMENT item (#PCDATA)>
##############FILE: xhtml.dtd #########################
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT html (head)>
<!ATTLIST html
xmlns CDATA #FIXED "http://www.example.com/xhtml"
>
<!ELEMENT head (title,style*)>
<!ELEMENT title (#PCDATA)>
<!ELEMENT style (#PCDATA)>
#############FILE: slideshow.xml ####################
<?xml version='1.0' encoding='utf-8'?>
<!DOCTYPE slideshow SYSTEM "slideshow2.dtd">
<slideshow>
<slide>
<title xmlns="http://www.example.com/slideshow">Wake up to
products!</title>
</slide>
</slideshow>

I want to use the namespace in my project. For this reason, I use a sample
from
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/sax/7b_pe.html
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/dom/5_ns.html
to test my understanding.
The slideshow2.dtd refer to the definition in 'xhtml.dtd'. Because in these
two files, they all use the 'title' as the element names. To solve these
conflicts, The namespace is used to qualified the one in slideshow2.dtd.
But the parser still complain that the 'title' in slideshow2.dtd is declared
more than once.
I use apache's Xerces.
I want to know if Xereces realy support namespace spec. now, or how to use
the namespace with a parser. Can anyone kindly tell me where to find some
material that demo the use of namespace in Java program.
Thanks for any help!!!
#############FILE: slideshow2.dtd ###############
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT slideshow (slide+)>
<!ELEMENT slide (title?, item*)>
<!ENTITY % xhtml SYSTEM "xhtml.dtd">
%xhtml;
<!ELEMENT title (#PCDATA)*>
<!ATTLIST title
xmlns CDATA #FIXED "http://www.example.com/slideshow"
>
<!ELEMENT item (#PCDATA)>
##############FILE: xhtml.dtd #########################
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT html (head)>
<!ATTLIST html
xmlns CDATA #FIXED "http://www.example.com/xhtml"
>
<!ELEMENT head (title,style*)>
<!ELEMENT title (#PCDATA)>
<!ELEMENT style (#PCDATA)>
#############FILE: slideshow.xml ####################
<?xml version='1.0' encoding='utf-8'?>
<!DOCTYPE slideshow SYSTEM "slideshow2.dtd">
<slideshow>
<slide>
<title xmlns="http://www.example.com/slideshow">Wake up to
products!</title>
</slide>
</slideshow>

How to use order by in stored procedure base block?

How to use order by in stored procedure base block? I need to change order by dynamically

Use SET_BLOCK_PROPERTY('BLOCK_NAME',ORDER_BY,'COLUMN_NAME1, COLUMN_NAME2');

How to use Stylesheet (XSL) with JSPX ?

Hi!
How to use XSL stylesheets with JSPX pages?
I want use an xsl transformations with jspx pages, I tried using the following syntax, but it didn't work....
<?xml version='1.0' stylesheet type="text/xsl" href="mathml.xsl" encoding='UTF-8'?>
<tr:html xmlns="http://www.w3.org/1999/xhtml">
what is the best way to use xslt with jspx pages?
Thanking you in advance,
Samba

Thanks Ric,
But My problem is not solved..
I'm getting the transformation working in plain HTML
The file given below :
<?xml-stylesheet type="text/xsl" href="mathml.xsl"?>

<html xmlns="http://www.w3.org/1999/xhtml"
>
<head>
<title>Content MathML Examples</title>
</head>
<body>
<div style="border-style:solid; border-width:1px; margin: 1em 1em 1em 1em; padding: 1em 1em 1em 1em;color:gold;background:grey;">
<pre><![CDATA[<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>]]>
</pre>
<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>
</div>
</body>
</html>But the same thing is not working when put in jspx page..
And I tried to use JSTL as you have suggested :
But the content is not getting transformed.
Here is the jspx page :
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
          xmlns:c="http://java.sun.com/jsp/jstl/core"
          xmlns:x="http://java.sun.com/jsp/jstl/xml"
          xmlns:m="http://www.w3.org/1998/Math/MathML"
          xmlns:xh="http://www.w3.org/1999/xhtml">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
    <af:document binding="#{backing_xsltTest.document1}" id="document1">
<div style="border-style:solid; border-width:1px; margin: 1em 1em 1em 1em; padding: 1em 1em 1em 1em;color:gold;background:grey;">
<f:verbatim>
<pre><![CDATA[<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>]]>
</pre>
</f:verbatim>
<c:import var ="mathml" url="/mathml.xsl"/>
<x:transform xslt="${mathml}">
<math xmlns="http://www.w3.org/1998/Math/MathML">
<apply>
<eq/>
<apply>
<abs/>
<ci> x </ci>
</apply>
<piecewise>
<piece>
      <apply><minus/><ci> x </ci></apply>
      <apply><lt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <cn> 0 </cn>
      <apply><eq/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
<piece>
      <ci> x </ci>
      <apply><gt/><ci> x </ci> <cn> 0 </cn></apply>
</piece>
</piecewise>
</apply>
</math>
</x:transform>
</div>
      <af:form binding="#{backing_xsltTest.form1}" id="form1">
      </af:form>
    </af:document>
</f:view>

</jsp:root>Can you please suggest where I'm doing wrong?
Thanking you in advance,
Samba

Does anyone know step by step how to use a PC with an AppleTV?

Does anyone know how to use a PC with an AppleTV and can this be done and if so, how?

Welcome to the Apple Community.
How far have you got into the set up process please.

How to use order by with hierarchical query

Similar Messages

Maybe you are looking for