How to use Reference type of Data Element

Hi guys, is there anyone could give me a trace how to use reference type of data element.
More details i'm going to reach is:
I create 2 tables:
eq.
1. table ZFIRST has field X with data element ZFX (Data element i declared).
2. table ZSECOND has field Y.
Here at field Y (second table) I'm going to declare a new data element say it ZFY, but in ZFY I'm going to use the data element as i declared before (ZFX). Is it possible if I do it using reference type data element (SE11)?
I already did this way, but I got error :
Field Y: Reference ZFX to class w/o interface cannot be used in DB table ZSECOND
What does it mean?. Did I miss something about using reference data element type?.
This error occurs when I activate ZSECOND table. However in creating ZFY (reference) to data element ZFX, there is no error occur.
The point is I need to RE-declared existing data element and ot put existing data element(ZFX) to my current table (ZSECOND).
Any helpful will be highly appreciated.
Thanks.
Edited by: dinivian dondi on Nov 4, 2010 8:30 AM

Field Y: Reference ZFX to class w/o interface cannot be used in DB table ZSECOND
What does it mean?. Did I miss something about using reference data element type?.
Apparently system doesn't allow you to type a transparent table field with deep type. This refers to references and tables types as components. The RDBMS (Relational DB Management System) cannot interpret this componenets correclty and mapp them to TABLEs in DB.
So I am affraid you won't be able to type table component with reference to other data element.
The point is I need to RE-declared existing data element and ot put existing data element(ZFX) to my current table (ZSECOND).
Sorry but I don't get it, could you please explain this more clearly. Maybe then we can think of some workaround for you.
Regards
Marcin

Similar Messages

How many type of data element exist

How many type of data element exist.
Saurabh

Hi,
Data Element Types
Introduction
The following tables identify and describe the valid data element types that may be specified for the -type option. The first table covers some general data element types. The remaining tables cover data element types specific to each diagram type identified in the Diagram Types table above.
General Data Element Types
The following table covers some general data element types.
Data Element Type Description
Actor Actors on CCDs and DFDs
Class Classes on CDs, CCDs, and STDs
Event Events on SDs and STDs
External Actors on CCDs and DFDs
Flow Control Flows, Data Flows, Result Flows, and Update Flows
Interface Communication Messages, Control Flows, Data Flows, Event Messages, Result Flows, and Update Flows
Message Communication Messages and Event Messages
AD Data Element Types
The following table identifies and describes the data element types for the Activity Diagram (AD).
Data Element Type Description
ADAction Actions on ADs
ADEvent Events on ADs
ADState States on ADs
ActionState Action States
ObjectInState Objects In States
CD Data Element Types
The following table identifies and describes the data element types for the Class Diagram (CD).
Data Element Type Description
ActualType Actual Types
AssocClass Association Classes
CDAggregation Aggregations on CDs
CDAssociation Associations on CDs
CDClass Classes on CDs
CDComposition Compositions on CDs
CDContainer Containers on CDs
CDGeneralization Generalizations on CDs
CDInterface Interfaces on CDs
Package Packages
Propagation Propagations
TemplateClass Template Classes
CCD Data Element Types
The following table identifies and describes the data element types for the Class Communication Diagram (CCD).
Data Element Type Description
CCDActor Actors on CCDs
CCDClass Classes on CCDs
CCDContainer Containers on CCDs
ComMessage Communication Messages
Subject Subjects
COD Data Element Types
The following table identifies and describes the data element types for the Collaboration Diagram (COD).
Data Element Type Description
CODActiveObject Active Objects on CODs
CODActor Actors on CODs
CODMessage MEssages on CODs
MultiObject MultiObjects
NaryLink N-ary Links
RoleEnd RoleEnds
RoleStart RoleStarts
CPD Data Element Types
The following table identifies and describes the data element types for the Component Diagram (CPD).
Data Element Type Description
CPDComponent Components on CPDs
CPDInterface Interfaces on CPDs
DFD Data Element Types
The following table identifies and describes the data element types for the Data Flow Diagram (DFD).
Data Element Type Description
ControlFlow Control Flows
DataFlow Data Flows
DataProcess Data Processes
DataStore Data Stores
DFDActor Actors on DFDs
ResultFlow Result Flows
UpdateFlow Update Flows
DPD Data Element Types
The following table identifies and describes the data element types for the DeploymentDiagram (DPD).
Data Element Type Description
ActiveObject ActiveObjects
Connection Connections
DPDActiveObject Active Objects on DPDs
DPDComponent Components on DPDs
DPDObject Objects on DPDs
Node Nodes
NodeInstance Node Instances
MGD Data Element Types
The following table identifies and describes the data element types for the Message Generalization Diagram (MGD).
Data Element Type Description
MessageDef Message Definitions
SD Data Element Types
The following table identifies and describes the data element types for the Sequence Diagram (SD).
Data Element Type Description
Object Objects
SDInitiator Initiators on SDs
SDMessage Messages on SDs
SDObject Objects on SDs
STD Data Element Types
The following table identifies and describes the data element types for the State Transition Diagram (STD).
Data Element Type Description
CDClass Classes on CDs associated with the STD
EventMessage Event Messages
STDAction Actions on STDs
STDClass Classes on STDs
STDEvent Events on STDs
STDState States on STDs
UCD Data Element Types
The following table identifies and describes the data element types for the Use Case Diagram (UCD)
Data Element Type Description
DirectedComm Directed Communication Association
UCDActor Actors on UCDs
UndirectedComm Undirected Communication Association
UseCase Use Cases
Reward If Helpful
Regards Madhu

How to use clob or blob data type in OWB

how to use clob or blob data type in OWB?
if OWB not surport these data type,how can i extract the large data type from data source

The same question was asked just two days ago No Data Found: ORA-22992
Nikolai Rochnik

Hello ! pls give some ti[ps how to use bapi's for data uploading?

hello !
pls give some ti[ps how to use bapi's for data uploading?
regards,
Arjun

Hi,
See the below report extract:
where it_data is having uploaded data.
LOOP AT it_data INTO wa_data.
 line_count = sy-tabix.
 "Date Validation
 CONCATENATE wa_data-uplft_date4(4) wa_data-uplft_date2(2) wa_data-uplft_date+0(2)
 INTO wa_data-uplft_date.
 "READ TABLE it_ekko INTO wa_ekko WITH KEY lifnr = wa_data-vendor.
 LOOP AT it_ekko_temp INTO wa_ekko_temp WHERE lifnr = wa_data-vendor.
 IF wa_ekko_temp-kdatb <= wa_data-uplft_date AND wa_ekko_temp-kdate >= wa_data-uplft_date.
 MOVE-CORRESPONDING wa_ekko_temp TO wa_ekko.
 APPEND wa_ekko TO it_ekko.
 ENDIF.
 ENDLOOP.
 "IF sy-subrc = 0 AND wa_ekko-kdatb <= wa_data-uplft_date AND wa_ekko-kdate >= wa_data-uplft_date.
 LOOP AT it_ekko INTO wa_ekko.
 wa_data_header-pstng_date = wa_data-uplft_date.
 wa_data_header-doc_date = sy-datum.
 wa_data_header-bill_of_lading = wa_data-bill_of_lad.
 wa_data_header-ref_doc_no = wa_data-del_no.
 CONCATENATE wa_data-header_text1 '-'
 wa_data-header_text2 '-'
 wa_data-header_text3 '-'
 wa_data-header_text4
 into wa_data_header-HEADER_TXT.
 IF wa_data-indicator = 'Y'.
 wa_data_item-material = '000000000000200568'.
 ELSE.
 wa_data_item-material = '000000000000200566'.
 ENDIF.
 LOOP AT it_ekpo INTO wa_ekpo WHERE ebeln = wa_ekko-ebeln AND matnr = wa_data_item-material.
 "Collect Item Level Data
 wa_data_item-plant = '1000'.
 wa_data_item-stge_loc = '1001'.
 wa_data_item-move_type = '101'.
 wa_data_item-vendor = wa_data-vendor.
 wa_data-qnty = wa_data-qnty / 1000.
 wa_data_item-entry_qnt = wa_data-qnty.
 wa_data_item-po_pr_qnt = wa_data-qnty.
 wa_data_item-entry_uom = 'KL'.
 wa_data_item-entry_uom_iso = 'KL'.
 wa_data_item-orderpr_un = 'KL'.
 wa_data_item-orderpr_un_iso = 'KL'.
 wa_data_item-no_more_gr = 'X'.
 wa_data_item-po_number = wa_ekpo-ebeln.
 wa_data_item-po_item = wa_ekpo-ebelp.
 wa_data_item-unload_pt = wa_data-unload_pt.
 wa_data_item-mvt_ind = 'B'.
 APPEND wa_data_item TO it_data_item.
 CLEAR wa_data_item.
 ENDLOOP.
 CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
 EXPORTING
 goodsmvt_header = wa_data_header
 goodsmvt_code = goodsmvt_code
 testrun = 'X'
 TABLES
 goodsmvt_item = it_data_item
 return = return.
 READ TABLE return INTO wa_return WITH KEY type = 'S'.
 IF sy-subrc <> 0.
 DESCRIBE TABLE return LINES sy-tfill.
 IF sy-tfill = 0.
 CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
 EXPORTING
 goodsmvt_header = wa_data_header
 goodsmvt_code = goodsmvt_code
 testrun = ' '
 TABLES
 goodsmvt_item = it_data_item
 return = return.
 CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
 EXPORTING
 WAIT = 'X'
 IMPORTING
 RETURN =
 ENDIF.
 ENDIF.
 LOOP AT return INTO wa_return.
 WRITE: 'Messsage TYPE ', wa_return-type,
 /,'ID ', wa_return-id,
 /, 'Number ', wa_return-number,
 /, 'Message ', wa_return-message,
 /, 'Long Text ', wa_return-message_v1,
 wa_return-message_v2,
 wa_return-message_v3,
 wa_return-message_v4,
 /, 'Failed at line', line_count.
 ENDLOOP.
 CLEAR: wa_ekko, wa_ekpo, wa_data, it_data_item[], wa_data_header.
 ENDLOOP.
Reward if useful!

How to use "Reference Structure" setting in analysis grid item

Hello expert,
in Bex analyzer, how to use "Reference Structure" setting in analysis grid item by example?
Many thanks,

The variable needs assigned a value, that's why you're getting prompted. When you execute the statement, it's not executing the variable and exec lines.
Having script output available in a grid would be an enhancement request.

How to use live type in motion 4

how to use live type in motion 4

There is a LiveType (or LiveFonts) content section in the Library in Motion 4 (but NOT Motion 5 - LiveType is obsolete, much to my chagrin...) - but you can still import LiveType projects into Motion 4 just as you could in Motion 3 - a simple drag'n'drop from the finder will do; or use Import from the file menu.

How to use TRUNC function with dates in Expression Builder in OBIEE.

Hi There,
How to use TRUNC function with dates in Expression Builder in OBIEE.
TRUNC (SYSDATE, 'MM') returns '07/01/2010' where sysdate is '07/15/2010' in SQL. I need to use the same thing in expression builder in BMM layer logical column.
Thanks in advance

use this instead:
TIMESTAMPADD(SQL_TSI_DAY, ( DAYOFMONTH(CURRENT_DATE) * -1) + 1, CURRENT_DATE)

How to use table type in bulk collect

Hi experts,
How to use table type in bulk collect see the procedure used( oracle 10g)
and error is
PLS-00597: expression 'REQ_REC' in the INTO list is of wrong type
CREATE OR REPLACE PROCEDURE SAMPLE_SP IS
TYPE TYP_A AS OBJECT
( COLMN1 TABLE1.COLM1%TYPE,
COLMN2 TABLE1.COLM2%TYPE,
COLMN3 TABLE1.COLM3%TYPE
TYPE REC_A IS TABLE OF TYP_A;
REQ_REC A_REC;
CURSOR REQ_CUR IS SELECT COLM1,COLM2,COLM3 FROM TABLE1 WHERE <CONDITION>;
BEGIN
OPEN REQ_REC;
LOOP
EXIT WHEN REQ_REC%NOTFOUND;
FETCH REQ_REC BULK COLLECT INTO REQ_REC LIMIT 1000;
FOR I IN 1..REQ_REC.COUNT
LOOP
<insert statement>
END LOOP;
COMMIT;
END LOOP;
END SAMPLE_SP;
Many thanks,
Kalinga

ok but that is not an issue..
Hi experts,
How to use table type in bulk collect see the procedure used( oracle 10g)
and error is
PLS-00597: expression 'REQ_REC' in the INTO list is of wrong type
CREATE OR REPLACE PROCEDURE SAMPLE_SP IS
TYPE TYP_A AS OBJECT
( COLMN1 TABLE1.COLM1%TYPE,
COLMN2 TABLE1.COLM2%TYPE,
COLMN3 TABLE1.COLM3%TYPE
TYPE REC_A IS TABLE OF TYP_A;
REQ_REC A_REC;
CURSOR REQ_CUR IS SELECT COLM1,COLM2,COLM3 FROM TABLE1 WHERE <CONDITION>;
BEGIN
OPEN REQ_CUR;
LOOP
EXIT WHEN REQ_REC%NOTFOUND;
FETCH REQ_REC BULK COLLECT INTO REQ_REC LIMIT 1000;
FOR I IN 1..REQ_REC.COUNT
LOOP
<insert statement>
END LOOP;
COMMIT;
END LOOP;
END SAMPLE_SP;
Many thanks,
Kalinga
Message was edited by:
Kalinga

How to use ADO(Microsoft ActiveX Data Objective 2.8 Library) to execute the store procedure of database in SQL server

how to use ADO（Microsoft ActiveX Data Objective 2.8 Library) to execute the store procedure of database in SQL server?
Does any body can tell me about this?
thanks
[email protected]

Hi
Did you succeed to execute the procedure?
How ?
Thanks
Shimon Zerbib

How to make reference wbs custom data carried to new wbs when using custom tab and custom table

I created a custom tab for WBS elements by using user exit CNEX0007 and custom screen and put a table control in it.
As table control's data has to be stored in a table I could not use append structure of PRPS.
When I used reference wbs, PRPS custom fields were carried also but I could not find any solution to fill table control data with reference table.
I need to get correspondence between reference number's and new id's key data. Is there any exit, enh. that I can store the relationship.

Solved...
I've used an enhancement point in include LCNPB_MF38. CJWB_SUBTREE_COPY exports a table called newnumbers. Here you can find correspondances between copied WBS and new WBS.
Exported table to memory id.
And imported it in another user-exit. You can use proper user exit for your need. ( EXIT_SAPLCNAU_002)

How to use record type for inserting data into a table

I've read through the web the following tip:
"When working with a large number of columns, using variables of type RECORD is a better approach. With this approach, you do not have to list anything in the INSERT statement, because you are inserting a variable into the table that is defined as a row from the same table."
I usually define a variable as
r_mytable     mytable%ROWTYPE;
and inside my procedure I'll set the fields I need as
r_mytable.field1 := 1;
r_mytable.field3 := 7;
and then I perform the insert as
insert into mytable
(field1,
field3)
values
(r_mytable.field1,
r_mytable.field3);
According to the tip I've copied above, how can I use the TYPE RECORD of pl/sql for achieving the same result but perhaps in a smarter way?
Thanks in advance!

Hi,
Are you looking for this?
SQL> create table table1 (id number, descr varchar2(30));
Table created
SQL>
SQL> DECLARE
2   my_rec table1%rowtype;
3 BEGIN
4   my_rec.id := 1;
5   my_rec.descr := 'TEST';
6   insert into table1 values my_rec;
7 END;
8 /
PL/SQL procedure successfully completed
SQL> select * from table1;
   ID DESCR
    1 TESTWorks with UPDATE too :
SQL> DECLARE
2   my_rec table1%rowtype;
3 BEGIN
4   my_rec.id := 2;
5   my_rec.descr := 'TEST2';
6   update table1 set row = my_rec where id = 1;
7 END;
8 /
PL/SQL procedure successfully completed
SQL> select * from table1;
   ID DESCR
    2 TEST2

How to use 2 Time trigger UI elements

Hi Experts,
My user doesn't want to see the time out error in the webdynpro application after leaving(idle mode) the browser for hours. And one more thing is he wants a popup for every 15mnts to show a message on the screen.
So, I have used 2 Time Trigger UI elements to achieve this functionality,
      1st one(Time Trigger UI Element) is used to show the pop up message and It is working fine to show the message in a Pop Up .
      2nd one is used to handle the Time Out Error for hours and this is not working as expected, if user leaves the browser for hours .
I hope you understand my requirement and issue.
Could you please suggest me how to achieve this functionality.
1000 Thanks in advance.
Regards,
Giri

Hi,
If I set the 3 hours to 2nd Time Trigger UI element and tested after 2 hours and browser is still throwing the time out error message.
After 2hrs is the time out error throwing by the Timed trigger or the standard session time out? I believe after 2 hrs the standard session time out is throwing! You need to give the delay time less than your session time out.
You can get the session timeout using wdr_task=>server->session_timeout ( in mins ) And you can get the application server time out using
data: name type pfeparname,
        value type pfepvalue.
name = 'rdisp/plugin_auto_logout'.   " parameter
call 'C_SAPGPARAM' id 'NAME' field name
                                    id 'VALUE' field value.   " value contains time out
Regards,
Kiran

How to Use SOAPArray to Exchanged Data with a Web Service

The method of a prototype Web service I created is defined to take many parameters
and return an object of a user defined class. Furthermore, the user defined class
includes data elements of another user defined class and the Java ArrayList class.
This works with a Java client referencing the WebLogic created client.jar file
but I don't know how well it will work with a non-Java client. In particular,
with Perl which is the language that will be used by the developer who first will
test with the prototype.
In posts to this newsgroup use of "language-specific, generic containers" has
been discouraged and the "language-agnostic" SOAPArray recommended. I have searched
this newgsroup and the Web for examples of how to use a SOAPArray in a Web service
EJB to receive parameters and return results but found none.
Will someone refer me to an example or give an overview of how a Java Web service
EJB running in WebLogic 6.1 would use SOAPArray to get parameter values and return
results?
Also, I would like confirmation that it is best to use SOAPArray to exchange data
with a Web service to achieve the goal of a service accessible by any language.
Thank you.

Replies in-line:
How are the structures, e.g. gltrans-workType, defined in the Web service?The structure is made up of nested Java Beans, but this does not mean that the
client for your web service has to be written in Java. The WSDL that I sent contains
everything that a .NET-based (or Perl-based, or Python-based, or VB-based, or
C++ based) Web Service Stack needs to correctly create all the data types in the
web services' signature! That's the beauty of XML Schema! It's programming language
independent :-)
In
other words, what definition in Java resulted in the WSDL statements?The WSDL wasn't produced by WLS 6.1, but it (WLS 6.1) can consume it.
What is the signature of method submitGLTransWorkAsJavaBean() in the
Web service?public void submitGLTransWorkAsJavaBean(GlTransactionsCpyType glTransactionsCpyType)
GlTransactionsCpyType is the outer-most Java Bean. WLS 6.1 does not generate
Java Beans for you, but it will use ones that you defined. See the Java Bean tutorial
on the Javasoft sitem for details on how to create a Java Bean.
Was the WSDL generated using the WL tools for creating a Web service?No.
Conclusion:
You asked for someone to provide you with an example of how to use SOAP array
in a WSDL, which is what the attached file contained :-) What you want to do now
is find a tool that can generate Java Bean code from this WSDL (Apache Axis has
a wsdl2java tool that should work), or create the Java Beans yourself. Afterwards,
create a WLS 6.1 Web Service a expose it for a Perl or .NET client.
Regards,
Mike Wooten
"Jeff Carey" <[email protected]> wrote:
>
Please elaborate.
How are the structures, e.g. gltrans-workType, defined in the Web service?
In
other words, what definition in Java resulted in the WSDL statements?
What is the signature of method submitGLTransWorkAsJavaBean() in the
Web service?
Was the WSDL generated using the WL tools for creating a Web service?
Thank you.
"Michael Wooten" <[email protected]> wrote:
Hi Jeff,
Sounds like a pretty cool prototype :-)
I have attached a WSDL (at the bottom of this post) that contains a<schema>
that
uses a SOAPArray to create an array of a <complexType>.
HTH,
Mike Wooten
"Jeff Carey" <[email protected]> wrote:
The method of a prototype Web service I created is defined to take
many
parameters
and return an object of a user defined class. Furthermore, the user
defined class
includes data elements of another user defined class and the Java ArrayList
class.
This works with a Java client referencing the WebLogic created client.jar
file
but I don't know how well it will work with a non-Java client. Inparticular,
with Perl which is the language that will be used by the developerwho
first will
test with the prototype.
In posts to this newsgroup use of "language-specific, generic containers"
has
been discouraged and the "language-agnostic" SOAPArray recommended.
I have searched
this newgsroup and the Web for examples of how to use a SOAPArray in
a Web service
EJB to receive parameters and return results but found none.
Will someone refer me to an example or give an overview of how a Java
Web service
EJB running in WebLogic 6.1 would use SOAPArray to get parameter values
and return
results?
Also, I would like confirmation that it is best to use SOAPArray toexchange
data
with a Web service to achieve the goal of a service accessible by any
language.
Thank you.

JAXB:How to get the type of an element

Hi
I am working with JAXB 2and i am using a custom ValidationEventHandler to validate my xml document:The issue I have is that when my document isn't valid,i would like to get the error node and its type(string,date...)
I tryed node.getNodeType() but it return if the node is ATTRIBUTE_NODE,TEXT_NODE....
public boolean handleEvent(ValidationEvent ve) {
        if (ve.getSeverity()==ValidationEvent.FATAL_ERROR ||
                               ve .getSeverity()==ValidationEvent.ERROR){
            ValidationEventLocator locator = ve.getLocator();
            org.w3c.dom.Node node=locator.getNode();
          System.out.println("ERROR element type:"+node.getNodeType());
         return true;
       }How could i get the type(String,Date,Integer...) of the node in error?
Edited by: riadhhwajdii on Aug 14, 2010 4:20 AM

As you already mention that is not resolved before the annotation processing stage
[ http://openjdk.java.net/groups/compiler/doc/compilation-overview/index.html]
So, you probably need to produce your own analysis code or better reuse the compiler's own code if that turns out to be easy (no clue). I reckon it is better if you avoid modifying the compiler itself as it will make much more difficult to maintain and deploy your (more than a) processor.
Sorry if you already tough about this.
Edited by: discretoboy on Apr 7, 2009 3:20 PM

How to make BI Info obj Data element in-herit source DE documntn?

Say I am in ECC. I go to SE11, give table name MARA and then doubleclick on the dataelement 'MATNR'. Then I click on documentation. I get a popup with Short text " Material Number" and Definition "Alphanumeric key uniquely identifying the material'.
I am interested in the latter information that is 'Definition' - & in general whatever documentation comes up for data element in ECC.CRM.SCM,SRM.
Now I log into SAP BI. I find that under characteristic 0Material, the data element is /BI0/oimaterial. When I double-click this datamaterial and press the documentation button, the system says 'No documentation'.
My Questions:
1. IS there a switch we could turn on in source ECC/SRM/CRM/SRM so that the data element in SAP BI inherits the original source field data element documentation.
{ I am not too convinced of the argument- that in BI we have info objects in ECC we have fields - since I am talking of data element level information- I would tend to think of this as an oversight of the designers or de-prioritization !!}.
2. Could we have an ABAP workaround? That is, in BI we identify the tables that house the mapping between the source and destination data elementsa and take out this information. Then we extract the dataelement documentation by function DOCU_GET (from eCC) and use the mapping info above to link SAP BI data element with source data element documentation.
WHY do I want to punish myself as above? My use case is, we take out SAP BI Table, field, metadata etc and create a model in a modeling tool and physical implementation in a 3rd party DW database as our own canonical, application-agnostic corporate datawarehouse. I would want the source data element documentation to flow to this last system as well as the modeling tool.
Regards
Sasanka

That is, in BI we identify the tables that house the mapping between the source and destination data elementsa and take out this information. Then we extract the dataelement documentation by function DOCU_GET (from eCC) and use the mapping info above to link SAP BI data element with source data element documentation.
1) SAP don't supply this, I would imagine, because R/3 isn't the only possible source of data. I'm currently working on an app that extracts from R/3, an Oracle database and APO. From whence should I take the documentation for my MATERIAL info object? While being able to transfer the documentation of data elements might be very useful for your app, I can't see that generally it would be of interest to clients - I've certainly never heard of such a requirement. So, my opinion at least, it isn't a design flaw.
2) As you've pointed out, you can get the tables that do the mapping, so you know the source data elements, so you can get the documentation. I'm not sure of how to store the documentation, but the obvious candidate for a link between infoobject and dataelement would be master data of an own infoobject. You could wrap DOCU_GET in an RFC (if it isn't RFC enabled), and do a direct call between your 3rd party app and r/3 to get the documentation. For information about the mapping tables, I'd suggest asking that question specifically in one of the BI forums.
matt

How to use Reference type of Data Element

Similar Messages

Maybe you are looking for