How to use SEA GSM Module on different slot of the cRIO 9073

Hello to All,
I have a SEA GSM+ Module on my cRIO 9073 at slot 7. I run the example program included in the resource CD as well as compiling the FPGA driver on my target but still don't work. Power supply is connected on the module. I don't know what I am missing. I followed strictly below steps as indicated in the read me text file but still nothing works. Please help.
How to switch the FPGA Target on LabVIEW
Complete the steps only if you use FPGA target other than 9104.
1. Add your new Compact RIO Target to the project
1. Add the new FPGA target below the cRIO-RT Target.
3. Drag the Gxxx folder from the original FPGA target and drop it into the new FPGA target. Make sure, that the module with its IOs, the FIFOs and the FPGA VI are integrated
4. Recompile the main VI - FPGA_App.vi, which is located in the Gxxx folder. A new bit file is created (.lvbit)
5. Open the Gxxx_Open.vi and select the just created bit file within the 'Open FPGA VI Reference.vi'.
6. Bind to TypeDef using ..Shared/Shared_TypeDefs.llb/Gxxx_FPGA_RefNum.ctl.
7. Close all VIs and do a "Save All, this project"
Thanks in Advance,
Joey

Hello Jeff,
The module is not working in any slot. Yes, I am using the sample code provided with the module name "Gxxx.lvproj". And also the FPGA is successfully compiled. Please see attached file for the error I received by the module.
I already see this error in this forum and it was answered by powering the module by the external power supply. I already powered it. but still got an error.
For the clarification, I am not using the "SEA cRIO-Combo plus" module in the project rather I am using "SEA cRIO-GSM plus". I also attached the sren shotof the manual. I don't see any Toolkit Software manual in the resource CD and on the SEA website.
Best Regards,
Joey
Attachments:
GSM error.JPG ‏34 KB
manual.JPG ‏91 KB

Similar Messages

How to use one app on two different devices so the info is the same...not having to start from level 1 again on new device

Hi there,
I have an app which I have recently achieved level 16 on (stored on ipod 4)...I have just purchased an iphone4s and would like to download the app to my iphone to play on there so I can play it anytime and not just at home when connected to wifi. When I downloaded it to my iphone it started me from level 1 again so I deleted it off and have tried several different ways to install the info syned from ipod without success...if this is not possible please advise...however I have been successfull with other games in having them show on both. I am afraid to delete it off itunes as it says it will delete it off the ipod when next synced.
Kind regards
Extremely frustrated individual
Amy

You're looking for something that's called a reverse web proxy. That'll require some manual configuration within Apache, as it's not supported natively by Server.app tool.
The other option is to have your "primary" host just fetch and display the web data from the other host — nothing requires the contents of a web page all be from the local host, after all.
Another potential option is to configurre for and VPN into the network, and you can then access the network locally — this assumes you're the primary consumer of the reverse proxy, and not "the world".
Related here and here and probably a few others; remember that the configuration files in Mavericks are located under /Library/Server/Web now.

How to use Check Function Module???

Hi Friends,
How to use Check Function Module in Workflow???
My requirement is to trigger the workflow at the last line item of the Material Document.
Rewards for sure for helpful answer.
-Satish

Hi Satish,
You know, the real power of forums like these is the search functionality. First you locate the correct forum, you succeeded in that and then you locate the search field and type in your question. In your case "check function module"
I suggest you do this right away and be amazed at all of the answers about his topic. Maybe you'll even find some topic about exactly the same issue with a different solution than check function modules and on top of that you learn something this way. Talk about win-win situation
Kind regards, Rob Dielemans

How to use read_text function module

Hi how to use read_text function module to read purchase order header text .what are all tht things to pass in ID,Name and Object
thanks,
Mahe

Dear,
Use below code.
DATA:IT_LINE LIKE TLINE OCCURS 0 WITH HEADER LINE,
V_TDNAME LIKE THEAD-TDNAME.
V_TDNAME = PO_NUMBER.
CALL FUNCTION 'READ_TEXT'
EXPORTING
*   CLIENT                        = SY-MANDT
    ID                            = 'F01'
    LANGUAGE                      = 'EN'
    NAME                          = V_TDNAME
    OBJECT                        = 'EKKO'
TABLES
    LINES                         = IT_LINE.
Thanks and Regards,

How to use these function modules

Hi all,
can anyone help that how to use these Function modules to update the status of a task, what are all the inputs i required to proceed
1. FC_USER_AUTHORITY_CHECK
<b>2. FC_USER_STATUS_CHECK
3. FC_USER_STATUS_UPDATE</b>
4. FC_USER_GET_CACTI
5. FC_USER_CHECK_FOR_OUTPUT
Thanks in Advance
Ganesh

Hi Rob,
thanks for ur reply,
but they are not clear what they are meant to be, I understood there are some flags needed to run the Function Modules 2 & 3 which are in bold...
but how do i populate them.. i am not getting that..
thanks
ganesh

How to use BAPI_MATERIAL_AVAILABILITY Function Module at batch level?

How to use BAPI_MATERIAL_AVAILABILITY FM to check material available at batch level?
And another question is what's the meaning of 'CHECK_RULE' in this FM. Thanks!

Field name : PRREG
fcheck more details on f1 help...
check_group defines the checking procedure to be used for availability check in individual applications.
along with the checkg group, checking rule specifies the final procedure for chkg..
eg:
ST for stock transport order
AQ for SD order project srock
also chk this help doc.
http://help.sap.com/saphelp_470/helpdata/en/cf/70124adf2d11d1b55e0000e82de178/content.htm
search the forum for sample code..
How to use BAPI_MATERIAL_AVAILABILITY Function Module....

How to use BAPI_MATERIAL_AVAILABILITY Function Module....

Hi Experts,
I want to know actual free available quantity (ATP Qty.) for mass materials,
How to use BAPI_MATERIAL_AVAILABILITY function module ?
I have select all material from MARA and inserted in itab.
LOOP AT ITAB.
CALL FUNCTION 'BAPI_MATERIAL_AVAILABILITY'
EXPORTING
    PLANT                    =
    MATERIAL                 =
    UNIT                     =
CHECK_RULE               =
STGE_LOC                 =
BATCH                    =
CUSTOMER                 =
DOC_NUMBER               =
ITM_NUMBER               =
WBS_ELEM                 =
STOCK_IND                =
DEC_FOR_ROUNDING         =
DEC_FOR_ROUNDING_X       =
READ_ATP_LOCK            =
READ_ATP_LOCK_X          =
IMPORTING
ENDLEADTME               =
AV_QTY_PLT               =
DIALOGFLAG               =
RETURN                   =
TABLES
    WMDVSX                   =
    WMDVEX                   =
I dont know how to use it.
pl. guide us.
Yusuf

Hi,
       data: iwmdvsx type table of bapiwmdvs with header line,
       iwmdvex type table of bapiwmdve with header line.
parameters: p_matnr type mara-matnr,
            p_werks type marc-werks,
            p_meins type mara-meins.
call function 'BAPI_MATERIAL_AVAILABILITY'
exporting
    plant            = p_werks
    material         = p_matnr
    unit             = p_meins
CHECK_RULE       =
STGE_LOC         =
BATCH            =
CUSTOMER         =
DOC_NUMBER       =
ITM_NUMBER       =
WBS_ELEM         =
STOCK_IND        =
IMPORTING
ENDLEADTME       =
AV_QTY_PLT       =
DIALOGFLAG       =
RETURN           =
tables
    wmdvsx           = iwmdvsx
    wmdvex           = iwmdvex.
check sy-subrc = 0.
Text
ATP information
Functionality
Using this function module, you can determine the receipt quantity still available for a particular material in a certain plant according to ATP logic (MRPII).
The availability check is carried out on transferring the material number, the plant and the input table (WMDVSX). The scope of the check, that is, which stocks, receipts and issues are to be included in the check is defined by the combination of checking group (material master) and cheking rule. In the function module, the system uses the checking rule defined in Sales & Distribution (A). You can overrule this checking rule by using an interface or a user-exit (exit_saplw61v_001). A similar procedure is also valid for the plant parameters. The customer number in the user-exit means that the plant selection can be controlled via the customer. If no plant parameters are given via the interface, the system uses the parameter 'WRK' saved in the user's fixed values.
The results of the availability check are recorded in the output table (WMDVEX). This table contains dates and available receipt quantities (ATP quantities). The results of the check depends on the following entries:
If no date and no quantity is transferred, the system displays the ATP situation from today's date into the future as the result.
If only a date and no quantity is transferred, the system displays the ATP situation from the corresponding date as the result.
If both a date and a quantity are transferred, the system calculates the availability situation for the quantity specified.
In the last two cases, the parameter 'DIALOGFLAG' is supplied. This can result in the following:
' ' (blank)   <=> quantity completely available
'X'           <=> only partial quantity available or not available at
                  all
'N'           <=> Material not included in the availability check
                  (Material not relevant to the availability check)
The system also displays the end of the replenishment lead time (ENDLEADTME).
regards

How to use SO_OBJECT_SEND function module

Hi friends,
how to use SO_OBJECT_SEND function module in 4.0B Server .

hi
good
check this code
REPORT ZTSAPMAIL.
DATA: X_OBJECT_TYPE LIKE SOOD-OBJTP.
DATA: BEGIN OF X_OBJECT_HD_CHANGE.
INCLUDE STRUCTURE SOOD1.
DATA: END OF X_OBJECT_HD_CHANGE.
DATA: BEGIN OF X_OBJCONT OCCURS 10.
INCLUDE STRUCTURE SOLI.
DATA: END OF X_OBJCONT.
DATA: BEGIN OF X_OBJHEAD OCCURS 0.
INCLUDE STRUCTURE SOLI.
DATA: END OF X_OBJHEAD.
DATA: BEGIN OF RAW_HEAD.
INCLUDE STRUCTURE SORH.
DATA: END OF RAW_HEAD.
DATA: BEGIN OF X_RECEIVERS OCCURS 0.
INCLUDE STRUCTURE SOOS1.
DATA: END OF X_RECEIVERS.
PARAMETERS: RECEIVER LIKE X_RECEIVERS-RECNAM. " Name
*BUILD MESSAGE HEADER
MOVE 'Sort field goes here' TO X_OBJECT_HD_CHANGE-OBJSRT. " Sort field
MOVE 'Name of the object goes here' TO X_OBJECT_HD_CHANGE-OBJNAM. " Name
MOVE 'Document title goes here' TO X_OBJECT_HD_CHANGE-OBJDES. " Title
MOVE 'F' TO X_OBJECT_HD_CHANGE-OBJSNS. " Functional OBJECT
MOVE 'E' TO X_OBJECT_HD_CHANGE-OBJLA. " Language
Object type of the new document
MOVE 'RAW' TO X_OBJECT_TYPE.
CLEAR X_OBJCONT.
MOVE 'Contents of mail' TO X_OBJCONT-LINE.
APPEND X_OBJCONT.
CLEAR X_OBJCONT-LINE. APPEND X_OBJCONT.
MOVE 'More contents' TO X_OBJCONT-LINE.
APPEND X_OBJCONT.
MOVE 'Still more contents'
to x_objcont-line.
APPEND X_OBJCONT.
MOVE ' ' TO X_OBJCONT-LINE.
APPEND X_OBJCONT.
Specific header (Dependent on the object type, here RAW)
REFRESH X_OBJHEAD.
DESCRIBE TABLE X_OBJCONT LINES RAW_HEAD-RAWSIZ.
MOVE RAW_HEAD TO X_OBJHEAD.
APPEND X_OBJHEAD.
*RECEIVERS table
CLEAR X_RECEIVERS.
REFRESH X_RECEIVERS.
MOVE RECEIVER TO X_RECEIVERS-RECNAM. " Name
MOVE 'B' TO X_RECEIVERS-RECESC. " Receiver type
MOVE 'X' TO X_RECEIVERS-SNDCP. " Send as a copy
MOVE 'X' TO X_RECEIVERS-SNDEX. " EXPRESS DOCUMENT
APPEND X_RECEIVERS.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
folder_id = 'OUTBOX'
forwarder = x_forwarder
object_fl_change = x_object_fl_change
OBJECT_HD_CHANGE = X_OBJECT_HD_CHANGE
object_id = x_object_id
OBJECT_TYPE = X_OBJECT_TYPE
OUTBOX_FLAG = 'X'
OWNER = SY-UNAME
store_flag = x_store_flag
importing
object_id_new = x_object_id_new
sent_to_all = x_sent_to_all "May need to use
TABLES
OBJCONT = X_OBJCONT
OBJHEAD = X_OBJHEAD
objpara = x_objpara
objparb = x_objparb
RECEIVERS = X_RECEIVERS.
reward point if hlepful.
thanks
mrutyun^

How to use ADD_MAINTAIN_COMPLETE function module

how to use ADD_MAINTAIN_COMPLETE function module
please help me.
by using the above function module
how can i change the ADRT table REMARK field

how to use ADD_MAINTAIN_COMPLETE function module
please help me.
by using the above function module
how can i change the ADRT table REMARK field

How to use XML Anonymizer Module for receiver mail Adapter?

Hi All,
I would like to know how to use XML Anonymizer Module for receiver mail adapter so as to change the namespace to http://sap.com/xi/XI/Mail/30 from my original namespace? Thank you all in advance?

Hi,
This may help u:
Replacing one namespace with another using XML Anonymizer Module
Thanks
Amit

How to use BAPI function module for maintaing product type to material

Hi,
Can you pls suggest me how to use BAPI Fuction module CCAP_REV_LEVEL_MAINTAIN
for maintaining the product type for the material using change number.
Pts will be rewarded.
Best Regards,
Padhy

Hi,
Can you pls suggest me how to use BAPI Fuction module CCAP_REV_LEVEL_MAINTAIN
for maintaining the product type for the material using change number.
Pts will be rewarded.
Best Regards,
Padhy

How to use this function module on abap hr GET_PDSNR_RANGE

how to use this function module on abap hr GET_PDSNR_RANGE
thankx.

PASS INETRNAL TABLE WITH SOME DATA TO TABELLE FOR GENERATING PDSNR SEQUENCE

How to use javasetters and getters in different classes

how to use setters and getters in different class so that the setvalue in one class is effect in second class for getting

If i got your question right,
make sure your classes are in the same package
make sure your getters are public/protected
make sure your code calls the setter before calling the getter
Kind regards

How to use WS_DOWNLOAD funciton module in back ground (Batch Job)

Hi all,
Can any one tell,
How to use WS_DOWNLOAD funciton module in back ground (Batch Job)
Thanks,
Ravi Kumar.

As disussed above you can use DATASET techniques to write the file to the application server. Then you could do a bdc call to Transaction CG3Y to transfer the file to the presentation server.
Just F1 help on keyword DATASET in SE80 for more information.
BDC Call Info found here: <a href="http://www.sap-img.com/bdc.htm">http://www.sap-img.com/bdc.htm</a>
Regards,
Philip Johannesen

How to use SD_VBAK_ARRAY_READ functional module

hello
can you please tell me how to use SD_VBAK_ARRAY_READ functional module. that means what i have to pass and what i should get.
Please help me

Hi Ravi,
i want to display vkorg,kunnr,and some other fields from the VBAK. User enters VKORG and some other fields but VKORG is compulsory.
so i written the code like this.
TYPES :BEGIN OF TEITAB_VBAK,
       VKORG type VBAK-VKORG,
       KUNNR TYPE VBAK-KUNNR,
       VBELN TYPE VBAK-VBELN,
       AUDAT TYPE VBAK-AUDAT,
       VDATU TYPE VBAK-VDATU,
       ERNAM TYPE VBAK-ERNAM,
       END OF TEITAB_VBAK.
DATA: ITAB_VBAK TYPE TABLE OF TEITAB_VBAK,
      WA_VBAK TYPE TEITAB_VBAK.
SELECT-OPTIONS: s_VKORG FOR P_VKORG OBLIGATORY,         " Sales Organization
                s_KUNNR FOR P_KUNNR,         " Sold-to party.
                s_VBELN FOR P_VBELN,         " Sales Document.
                s_MATNR FOR P_MATNR,         " Material number.
                s_AUDAT FOR P_AUDAT,         " Document Date (Date Received/Sent).
                s_VDATU FOR P_VDATU,         " Requested delivery date.
                s_ERNAM FOR P_ERNAM,         " Name of Person who Created the Object.
                s_VKAUS FOR P_VKAUS.         " Usage indicator.
SELECT VKORG KUNNR VBELN AUDAT VDATU ERNAM
FROM VBAK
INTO CORRESPONDING FIELDS OF TABLE ITAB_VBAK
WHERE VKORG IN S_VKORG AND AUART EQ 'ZRA'.
CALL FUNCTION 'SD_VBAK_ARRAY_READ'
EXPORTING
I_BYPASSING_BUFFER          = ' '
I_REFRESH_BUFFER            =
TABLES
    IT_VBAK_KEY                 =
ET_VBAK                     =
EXCEPTIONS
RECORDS_NOT_FOUND           = 1
RECORDS_NOT_REQUESTED       = 2
OTHERS                      = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
so i confused where to call this fucntional module and what to pass. That means call this functional module before the select query or after the select query and what to pass.
i am new in ABAP.
Please help me to solve this problem .

How to use SEA GSM Module on different slot of the cRIO 9073

Similar Messages

Maybe you are looking for