How to use swf object

Hi have been trying to get my head around how to use swf object, I know very little javascript and so am having difficulty in modifying the code to suit my needs. This is my page which I have used dreamweaver cs3 and have used insert>media>flash and it is working well but does not validate. I would really appreciate if somebody could write the exact html code I need to convert this to swf object.
http://www.kimberleywebdesign.com.au/Links.html

You should be able to just declare a variable outside of the onComplete function and assign it the loaded object when the file loads...
var loadedSWF:MovieClip;
function loadComplete(e:Event):void {
     removeChild(old_mc);
     addChild( DisplayObject(LoaderInfo(e.target).content) );
     loadedSWF = MovieClip(e.currentTarget.content);
function doStuffToSWF(){
      loadedSWF.something....

Similar Messages

How I use swf in swf (nested) ?

Flash is case-sensitive in naming(symbols,form
fields,components) ?
How I use ScrollPane ?
How I use swf in swf (nested) ?

What I've done in the past is created an image using an image editor like MS Paint, then change the image to black/white instead of color, and used grey instead of black. Then upload the image via SE78. Then you can include the image in your sapscript using the BITMAP statement. Search for watermark in this forum and you should get some more info.
BITMAP ZIMAGE OBJECT GRAPHICS ID BMAP TYPE BCOL
Regards,
Rich Heilman

How to use lock object? what we lock either total ztable or only record?

Hi
How to use lock object? what we lock either total ztable or only particular record?
Don't tell create lock object on se11 with E letter & acll it in program with eENQUEUE & DEQUEUE.
just tell me we will lock only particular record or total ztable?
specify with example.
Thanks.

Hi
Go to SE11, in the option 'Lock object' enter the name of your lock,
begin with 'E', suppose 'EXXXX' And create. In tab 'Tables' fill the
table name where the record you want to lock exist and select the
lock mode. Lock mode can be shared and exclusive. If 'shared',
when you lock the record, other can also read data, but can not
modify. If 'exclusive', when you lock the record, other can neither
read nor modify the record. After save and activate, you will get two
function module.'ENQUEUE_EXXXX' to lock record,
'DEQUEUE_EXXXX' to release lock on one record.
When use this function module it only lock one record at a time. It
does not lock the table.

How to use Business Object like Vendor or PurchasingInfo

Hi,
How to use Business Object ( like Vendor or PurchasingInfo ) from my Object?
For example:
CLASS myEntity DEFINITION.
          PUBLIC SECTION.
               METHODS: getVendor EXPORTING pVendor TYPE Vendor.
           PRIVATE SECTION.
           DATA: aVendor TYPE REF TO Vendor.
ENDCLASS.
CLASS myEntity IMPLEMENTATION.
METHOD getVendor
           pVendor = aVendor .
ENDMETHOD.
ENDCLASS

Hi,
I am giving u a demo Program for ur doubt.
REPORT demo_class_counter .
CLASS counter DEFINITION.
PUBLIC SECTION.
    METHODS: set IMPORTING value(set_value) TYPE i,
             increment,
             get EXPORTING value(get_value) TYPE i.
PRIVATE SECTION.
    DATA count TYPE i.
ENDCLASS.
CLASS counter IMPLEMENTATION.
METHOD set.
    count = set_value.
ENDMETHOD.
METHOD increment.
    ADD 1 TO count.
ENDMETHOD.
METHOD get.
    get_value = count.
ENDMETHOD.
ENDCLASS.
DATA number TYPE i VALUE 5.
DATA cnt TYPE REF TO counter.
START-OF-SELECTION.
CREATE OBJECT cnt.
CALL METHOD cnt->set EXPORTING set_value = number.
DO 3 TIMES.
    CALL METHOD cnt->increment.
ENDDO.
CALL METHOD cnt->get IMPORTING get_value = number.
WRITE number.
For more demo programs type 'abapdocu' in the command field
U will be getting some demo programs.
There select the abap objects.
Regards,
Jagadish

How to use swf file for Spark Skin

Hi all
I have little confuse about how to use swf file with Spark Skin,
in Flex3 , i use Flex Skin Design Extension for Flash to deal with skin ,
so basically , I just create a swf file and import to the project , then everything is ok
but , seem that not working in flex4 , spark skin.
1` I can't find the Flex Skin Design for the FlashCs4
2` I try to use FlashCs3 version to import the skin art to the project , but seemed not working.
3` I Google and check the Flex4 Help , seemed Spak skin need the Skin-Class , which I don't know how to use that with swf file
what I have searched is how to use FXG , or some jpg file in that skin class, none of them are use swf file.
so , is there any way that let user use the swf file to deal with the skin?
is the Flex Skin Design can use in Flex4?
Thanks

Hello,
I'm new to Flex, but have come to it from Flash Pro. I'd like to know the same thing. I think I found the answer here:
http://www.flashallys.com/blog/spark-button-skinning-with-flash-symbols/
However my question is now: Is this a good approach to use?
99% of the googling I've done tells me to skin components with fxg files. I've tried that by creating graphics and exporting from flash, but using swfs containing lots of graphics is much faster so I'd rather use that.
The other thing I've done is to create custom components using these helpful tutorials:
Creating component in flash:
http://www.webkitchen.be/2008/12/12/video-tutorial-make-flex-components-with-flash-cs4/
Dealing with Resizing with method overrides for your flash component:
http://www.psyked.co.uk/flex/creating-flex-components-the-easy-way-for-flash-ide-converts. htm
This allows me the flexibility of Flash Pro design with the layout, transistions, data binding etc from Flex.
So my question is: Is this approach (skinning spark components with swfs, and using custom swc components made in flash) a bad idea for any reason? E.g. does it create slow mobile apps?
Cheers
Chris

How to use a object(in MXML - in FLEX 4) in multiple way.

This is my object in MXML:
<mx1:Canvas id="menuElement" visible="true" rotationY="-15">
     <mx1:Canvas mask="{imageMask}">
          <mx1:Image id="menuImage" visible="true"/>
          <s:BorderContainer id="menuBackground" width="70" visible="true" borderVisible="false">
                <s:Label id="menuDescription" fontSize="30" fontWeight="bold" rotation="-90" />
                    <s:backgroundFill>
                         <s:LinearGradient rotation="90">
                              <s:entries>
                                   <s:GradientEntry id="backgroundColor" color="0x000010" alpha="0.6"/>
                              </s:entries>
                         </s:LinearGradient>
                    </s:backgroundFill>
               </s:BorderContainer>
          </mx1:Canvas>
     <mx1:Canvas id="imageMask" backgroundColor="#FF0000"/>
</mx1:Canvas>
I use this object (one time) with configuration in actionscript (positions, source of picture etc.) and I receive something like on a picture below:
Now, I need to create 4 elements like below. I don't wan't to copy 4 times this block of program. Anybody have idea how can I make it and how can
I recall of each element from actionscript?
Regards

if you run nw04s SP8, it's a limitation. you can create your own simple types and use them in your entities. but the custom data structures you create in the dictionary don't show in list of available structures when you want to create a new complex attribute

How to use Logger object in Lookout 5.0

I am now trying to log data using Logger object. I use Switch1 for activating LogContinuously mode and Switch2 for breaking logging process. If I turn off Switch1, the logging process stops, its ok. My problem is if Switch1 is still on and I turn off Switch2, the logging process is still running. I seems different from what I have read from Help file. Anyone has the solution for it?Please give me an advice! Thanks a lot. Its better if someone post an example about using Logger object here for reference.
Regards,

I think the behaviour you described is correct. If you turn on switch2, the logging process will stop, even when switch1 is on. If you turn off switch2, the process will be running.
Here is an example of logger object.
http://zone.ni.com/devzone/cda/epd/p/id/3816
you can change the "log break" button into a switch, which can better show you how it works.
Ryan Shi
National Instruments

How to use Generic Object Services(GOS) for each table control record.

Dear Expert,
I am using generic object services for document attachment but i am facing a problem while attaching document to a table control row. my requirement is to attach separate document for each and every row of table control but i am unable to attach document row wise of the table control.for each row GOS should display corresponding attached document not all the attached document.
Thanks in Advanced
Bhuwan Tiwari
Edited by: BHUWAN TIWARI on Feb 8, 2011 4:16 PM
Edited by: BHUWAN TIWARI on Feb 8, 2011 4:16 PM

You haven't explained what object and object key you're using, nor have you provided any indication of how you implemented the GOS attachment functionality. You need to provide more information to resolve an issue like this.

How to use session object in jsp

hi all
marry christmas
can anyone plz tell me how to use session obect in jsp
rachna
Message was edited by:
rachna_arora82

hi rachna,
JSP has a default(implicit) session object...... use the getSession(true) method on the session object and then going u can either get or set attributes depending on the requirement
That was in general and now with the issue u have got..... what u can do is that the u can create session for every user who logs in and when he/she tries to login again then u can probably check for the existing session object in the JSP and perform the logic as required..... any clarifications plzzzzzzz let me know
Thanks n Regards
Naveen M
Message was edited by:
Novice_inJAVA
Message was edited by:
Novice_inJAVA

How to use std object RFBIBL00

Dear All,
For uploading open item of vendor and customer std lsmw RFBIBL00 is available.
I know how to do recording in lsmw for new object but any one can help how to use std lsmw available in SAP. For eg.RFBIBL00
Regards,
Bhadresh

You'll find that the RFBIBL00 program, suprisingly, has extensive documentation attached - or you could try
http://help.sap.com/saphelp_45b/helpdata/en/35/a47e63763e0392e10000009b38f9b7/content.htm
or the print documentation at
help.sap.com/printdocu/core/Print46c/en/data/pdf/CAGTFADM/CAGTFADM-FI.pdf
cheers
Jonathan

How to use ConnectionPoolDataSource object?

i use embedded OC4J server,
build in data-source.xml file the information about DataSource object
and try to organized ConnectionPoolDataSource object,
but a java.lang.ClassCastException rises.
The problem is, i need to use a pooled connection datasource,
to do this i get the information about datasource object
throw lookup in JNDI tree the "pooled-location" name,
so the type of my datasource object became com.evermind.sql.OrionPooledDataSource.
but in my jsp code i can use only DataSource object,but not ConnectionPoolDataSource object because of java.lang.ClassCastException.
Hlp me please to understand how to use ConnectionPoolDataSource.
thank you

Please post this question on the application server forum at:
http://forums.oracle.com/forums/forum.jsp?id=486963
Thanks,
JR

How to use an object's paint method

I have created a class imagePanel which extends a jPanel to display an image. When I create a new imagePanel object I pass it an image argument which is used to paint my image on the jPanel, so far so good. I don't wish to have to continuously create new ImamePanels to display new images so I thought I could make a set_Image method that would set a new image in an exising imagePanel object. This is where I run into problems how to use the existing object paint method to replace the image. I tried this without success:
public Image setMyImage (Image myImage)
imageX = myImage; // imageX is the image that is painted by the imagePanel object's paint method
paint(g);
Something must be wrong on how I access the paint method. Thanks for any help.
Jack

Yahoooo, got it. This was the code I needed and thanks for your help:
public void setImage (Image myImage)
imageX = myImage;
repaint(300);
}

How to use BOR object?

Hello,
We have never used a BOR object. We want use FIPP object. How can we do it? How can we call the Post method?
Thanks a lot.
Edited by: LM on Sep 8, 2008 11:07 AM

Hi
Refer to the links,
Probel with POST method of FIPP
FIPP Workflow
Regards
Sumit Agarwal

How to use same object in another vi file.

Hi i am new to OOP in labview.
How to use (ACCESS) same Object in multiple VI fiels in labview.
in c# if we use same name space , then we can acces the object .
i dont know how to use it in labview.
and also i need to know , how to use oop in large applications

Well LVOOP tries to be this...
And the Actor Framework tries to be this... Using some of LabVIEW's object oriented components.
You can have LVOOP without Actor Framework, but you can't have the Actor Framework without LVOOP. You can however have other actor based designs without LVOOP but honestly few go this route because classes help force the developer to work inside the constructs of the design.
Also quit yelling so much. And before you try taking on LabVIEW's object oriented designs (and Actor for crying out loud) I'd suggest taking some beginner training which can be found at the bottom of this page.
https://decibel.ni.com/content/docs/DOC-40451

How to use an Object Type from Another Database

Hi,
I have this requirement that I need to call a stored procedure from another DB (db1) but I am having a problem with this because one of the input parameters uses an object type defined in that DB (db1). Is it possible to use an object type from another database? TIA!

Sven W. wrote:
At least for queries, but I think also for procedure arguments..You (both) probably missed my post?
We can't use a remote type as procedure argument, even with the same OID.
It's OK for query on a remote object column though :
SQL> conn remote_user@remote_db
Entrez le mot de passe :
Connecté.
SQL> create type mytype oid '19A57209ECB73F91E03400400B40BBE3'
2 as object (att1 number);
3 /
Type créé.
SQL> create table mytable (col1 mytype);
Table créée.
SQL> insert into mytable values (mytype(777));
1 ligne créée.
SQL> create or replace function myfunc (p_in in mytype) return number
2 is
3 begin
4   return p_in.att1;
5 end;
6 /
Fonction créée.
SQL> disconn
Déconnecté de Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>
SQL>
SQL>
SQL>
SQL>
SQL> conn my_user@local_db
Entrez le mot de passe :
Connecté.
SQL> create type mytype oid '19A57209ECB73F91E03400400B40BBE3'
2 as object (att1 number);
3 /
Type créé.
SQL> select * from mytable@test_dbl;
COL1(ATT1)
MYTYPE(777)
SQL> declare
2   res number;
3 begin
4   res := myfunc@test_dbl(mytype@test_dbl(777));
5 end;
6 /
res := myfunc@test_dbl(mytype@test_dbl(777));
ERREUR à la ligne 4 :
ORA-06550: Ligne 4, colonne 26 :
PLS-00331: référence non valide à REMOTE_USER.MYTYPE@TEST_DBL.WORLD
ORA-06550: Ligne 4, colonne 2 :
PL/SQL: Statement ignored
SQL> declare
2   res number;
3 begin
4   res := myfunc@test_dbl(mytype(777));
5 end;
6 /
res := myfunc@test_dbl(mytype(777));
ERREUR à la ligne 4 :
ORA-06550: Ligne 4, colonne 9 :
PLS-00306: numéro ou types d'arguments erronés dans appel à 'MYFUNC'
ORA-06550: Ligne 4, colonne 2 :
PL/SQL: Statement ignored

How to use swf object

Similar Messages

Maybe you are looking for